Unveiling Unexpected Modulator-CO2 Dynamics within a Zirconium Metal-Organic Framework

Identification of Adsorption Sites for CO2 in a Series of Rare-Earth and Zr-Based Metal-Organic Frameworks

The adsorption ofCO 2 ${{\rm{CO}}_2 }$ in MOF-808, NU-1000 and a series of rare-earth CU-10 analogues has been studied with first principles DFT and classical Monte-Carlo methods. DFT calculations describe the interaction ofCO 2 ${{\rm{CO}}_2 }$ with the different metal-organic frameworks (MOFs) as physisorption, but where we can distinguish several adsorption sites in the vicinity of the metal nodes. Beyond the identification of adsorption sites, the MOFs were synthesized, activated, and characterized to evaluate their experimentalN 2 ${{\rm{N}}_2 }$ andCO 2 ${{\rm{CO}}_2 }$ adsorption capacity. Classical Grand Canonical Monte-Carlo (GCMC) simulations for the adsorption ofCO 2 ${{\rm{CO}}_2 }$ are in very good agreement with DFT results for identifying the most favored adsorption sites in the MOFs. In contrast, a rather mixed agreement between GCMC simulations and experimental results is found for the estimation of adsorption capacity of several MOFs studied towardN 2 ${{\rm{N}}_2 }$ andCO 2 ${{\rm{CO}}_2 }$ .

Modulated Multicomponent Reaction Pathway by Pore-Confinement Effect in MOFs for Highly Efficient Catalysis of Low-Concentration CO2

The conversion of flue gas CO2 into high-value chemicals via multicomponent reactions (MCRs) offers the advantages of atom economy, bond-formation efficiency and product complexity. However, because of the competition between reaction sequences and pathways among substrates, the efficient synthesize the desired product is a great challenge. Herein, a porous noble-metal-free framework (Cu-TCA) was synthesized, which can highly effectively catalyze the multicomponent conversion of CO2 by modulating reaction pathways. The pores with the size of 6.5 Å×6.5 Å in Cu-TCA selectively permit the entry of propargylamine and CO2 at simulated flue gas concentrations, At the same time, the larger-sized phosphine oxide is hindered outside the pores. Control experiments and NMR spectroscopy revealed that CO2 and propargylamine in the pores preferentially reacted to form oxazolidinones, which further reacted with phosphine oxide outside the pores to produce phosphorylated 2-oxazolidinones. Therefore, the reaction pathways and sequence of the substrates were controlled by the confinement effect of the pores in Cu-TCA. Density functional theory (DFT) calculations supported the coordination of Cu-TCA with the alkyne, significantly reducing the reaction barrier and promoting catalytic reaction. This study developed a new strategy for regulating the reaction pathways to promote MCRs via the confinement effect of MOF.

Determination of five alternaria toxins in peppermint by dispersive solid-phase extraction coupled with ultra-high performance liquid chromatography-tandem mass spectrometry based on MOF-808-TFA

An efficient and rapid ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MSMS) method was developed for simultaneous determination of 5 alternaria toxins (ATs) in edible and medicinal plant - peppermint using MOF-808-trifluoroacetic acid (MOF-808-TFA) as the adsorbent. Characterization methods such as scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and N2 adsorption-desorption demonstrated that the synthesized MOF-808-TFA had a regular ortho-octahedral configuration and high specific surface area. Under the optimal conditions, the 5 ATs showed good linearity (R2 ≥ 0.9993) in their respective concentration ranges. The limits of quantifications (LOQs) of the method ranged from 0.21 to 0.48 μg/L, and the recoveries were 77.8-118.2 %, with the relative standard deviations (RSDs) less than 8.9 %.

Development of a Multiparticulate Metal-Organic Framework/Textile Fiber Swatch

The versatility of metal-organic frameworks (MOFs) has led to groundbreaking applications in a wide variety of fields, especially in the areas of energy, environment, and sustainability. For example, MOFs can be designed for high uptake of toxic gases and pollutants, such as CO2, NH3, and SO2, but designing a single MOF that shows tangible uptake for all of these gases is challenging due to the differences in the chemical and physical properties of these molecules. To this end, integrating multiple MOFs onto textile fibers and crafting various structures have emerged as pivotal developments, enhancing framework durability and usability. MOF composites prepared on readily available textile fibers offer the flexibility essential for critical applications, including heterogeneous catalysis, chemical sensing, toxic gas adsorption, and drug delivery, while preserving the unique characteristics of MOFs. This study introduces a scalable and adaptable method for seamlessly embedding multiple high-performing MOFs onto a single textile fiber using a dip-coating method. We explored the uptake capacity of these multi-MOF composites for CO2, NH3, and SO2 and observed a performance similar to that of traditional powdered materials. Along with harmful gas adsorption, we also have evaluated the permeation and reactivity of these MOF/textile composites toward chemical warfare agents (CWAs) like GD (soman), HD (mustard gas), and VX. In combination, these results demonstrate a fundamental advancement toward establishing a consistent strategy for the hydrolysis of nerve agents in real-world scenarios. This approach can substantially increase the protection toward CWAs and enhance the effectiveness of protective equipment such as fabrics for protective garments. This dip-coating method for the integration of multiple MOFs on a single textile fiber unlocks a wealth of possibilities and paves the way for future innovations in the deployment of MOF-based composites.

Hydrophobic Metal-Formate Composites for Efficient CO2 Capture

Carbon capture, utilization, and sequestration (CCUS) have emerged as pivotal mitigation strategies in addressing climate change induced by greenhouse gas emissions. In this pursuit, our objective is to enhance the efficacy of adsorptive CO2 capture by harnessing state-of-the-art framework sorbents engineered for exceptional CO2 selectivity, high intrinsic stability in the presence of moisture, and facile regeneration. To this end, a series of ultramicroporous mixed aluminum and iron formate framework materials, Fe-ALFs, were synthesized. Furthermore, their moisture stability has been significantly enhanced by passivation with polyvinylidene fluoride (Fe-ALF-PVDF). Gas sorption and breakthrough measurements demonstrate that Fe-ALF-PVDF exhibits outstanding CO2 adsorption capacities (4.6 mmol/g at 298 K) and remarkable CO2/N2 selectivity (387). In addition, it can be economically produced from readily available chemicals and is easy to regenerate. Fe-ALF-PVDF presents an innovative adsorbent material for efficiently capturing CO2 from humid postcombustion flue gases and other moisture-rich gas streams.

Small Rotations, Big Effects: Lessons from Water Adsorption in NU-1000

In this study, the adsorption mechanism of water in the metal-organic framework NU-1000 was investigated using molecular simulations. The simulations predict a significant impact of small changes in terminal aquo ligand orientation on the shape and pressure of the condensation step in the water adsorption isotherm. The analysis revealed that the rotational mobility of aquo ligands, often neglected in computational studies, can shift the condensation step by up to 20% in the relative humidity scale. By examining adsorption modes and interaction sites, it was demonstrated that configurational changes in the Zr6O8 node affect water adsorption significantly and can change the nature of the interactions from hydrophobic to hydrophilic. We propose a robust approach to account for these changes in simulations, achieving good agreement with experimental results. This work underscores the necessity of considering local, molecular flexibility in water adsorption simulations to avoid mischaracterization of MOFs' water adsorption properties.

Node Distortions in UiO-66 Inform Negative Thermal Expansion Mechanisms: Kinetic Effects, Frustration, and Lattice Hysteresis

In metal-organic frameworks (MOFs) the interplay between the dynamics of individual components and how these are constrained by the extended lattice can yield unusual emergent phenomena. For the archetypal Zr-MOF, UiO-66, we explore the cooperative dynamics of a Zr-node transformation that gives rise to negative thermal expansion (NTE). Using in situ synchrotron X-ray scattering, with powder diffraction and pair distribution function (PDF) analyses, we identify lattice hysteresis and a thermal ramp-rate-dependence of the thermal expansion. Specifically, kinetic trapping of distorted node states formed at high temperature, leads to broad variability in the apparent thermal expansion which ranges from large positive to large negative thermal expansion with coefficients of thermal expansion (CTE) from +45 to -80 × 10-6K-1. Time-resolved relaxation studies at selected temperatures suggest that when equilibrated UiO-66 is intrinsically NTE, with a CTE of -35 × 10-6K-1. Kinetic trapping of the node-distorted state following high temperature activation has broad implications for characterization and applications of these Zr-MOFs; the nonequilibrium node state depends on the thermal history of the sample with quench vs slow cooling likely to impact gas binding, pore volume, and accessible catalytic sites.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Precise Modulation of CO2 Sorption in Ti8Ce2-Oxo Clusters: Elucidating Lewis Acidity of the Ce Metal Sites and Structural Flexibility

Investigating the structure-property correlation in porous materials is a fundamental and consistent focus in various scientific domains, especially within sorption research. Metal oxide clusters with capping ligands, characterized by intrinsic cavities formed through specific solid-state packing, demonstrate significant potential as versatile platforms for sorption investigations due to their precisely tunable atomic structures and inherent long-range order. This study presents a series of Ti8Ce2-oxo clusters with subtle variations in coordinated linkers and explores their sorption behavior. Notably, Ti8Ce2-BA (BA denotes benzoic acid) manifests a distinctive two-step profile during the CO2 adsorption, accompanied by a hysteresis loop. This observation marks a new instance within the metal oxide cluster field. Of intrigue, the presence of unsaturated Ce(IV) sites was found to be correlated with the stepped sorption property. Moreover, the introduction of an electrophilic fluorine atom, positioned ortho or para to the benzoic acid, facilitated precise control over gate pressure and stepped sorption quantities. Advanced in situ techniques systematically unraveled the underlying mechanism behind this unique sorption behavior. The findings elucidate that robust Lewis base-acid interactions are established between the CO2 molecules and Ce ions, consequently altering the conformation of coordinated linkers. Conversely, the F atoms primarily contribute to gate pressure variation by influencing the Lewis acidity of the Ce sites. This research advances the understanding in fabricating metal-oxo clusters with structural flexibility and provides profound insights into their host-guest interaction motifs. These insights hold substantial promise across diverse fields and offer valuable guidance for future adsorbent designs grounded in fundamental theories of structure-property relationships.

Molecular driving forces for water adsorption in MOF-808: A comparative analysis with UiO-66

Metal-organic frameworks (MOFs), with their unique porous structures and versatile functionality, have emerged as promising materials for the adsorption, separation, and storage of diverse molecular species. In this study, we investigate water adsorption in MOF-808, a prototypical MOF that shares the same secondary building unit (SBU) as UiO-66, and elucidate how differences in topology and connectivity between the two MOFs influence the adsorption mechanism. To this end, molecular dynamics simulations were performed to calculate several thermodynamic and dynamical properties of water in MOF-808 as a function of relative humidity (RH), from the initial adsorption step to full pore filling. At low RH, the μ3-OH groups of the SBUs form hydrogen bonds with the initial water molecules entering the pores, which triggers the filling of these pores before the μ3-OH groups in other pores become engaged in hydrogen bonding with water molecules. Our analyses indicate that the pores of MOF-808 become filled by water sequentially as the RH increases. A similar mechanism has been reported for water adsorption in UiO-66. Despite this similarity, our study highlights distinct thermodynamic properties and framework characteristics that influence the adsorption process differently in MOF-808 and UiO-66.

Advances in CO2 activation by frustrated Lewis pairs: from stoichiometric to catalytic reactions

The rise of CO2 concentrations in the environment due to anthropogenic activities results in global warming and threatens the future of humanity and biodiversity. To address excessive CO2 emissions and its effects on climate change, efforts towards CO2 capture and conversion into value adduct products such as methane, methanol, acetic acid, and carbonates have grown. Frustrated Lewis pairs (FLPs) can activate small molecules, including CO2 and convert it into value added products. This review covers recent progress and mechanistic insights into intra- and inter-molecular FLPs comprised of varying Lewis acids and bases (from groups 13, 14, 15 of the periodic table as well as transition metals) that activate CO2 in stoichiometric and catalytic fashion towards reduced products.

Modulator-Dependent Dynamics Synergistically Enabled Record SO2 Uptake in Zr(IV) Metal-Organic Frameworks Based on Pyrene-Cored Molecular Quadripod Ligand

Developing innovative porous solid sorbents for the capture and storage of toxic SO2 is crucial for energy-efficient transportation and subsequent processing. Nonetheless, the quest for high-performance SO2 sorbents, characterized by exceptional uptake capacity, minimal regeneration energy requirements, and outstanding recyclability under ambient conditions, remains a significant challenge. In this study, we present the design of a unique tertiary amine-embedded, pyrene-based quadripod-shaped ligand. This ligand is then assembled into a highly porous Zr-metal-organic framework (MOF) denoted as Zr-TPA, which exhibits a newly discovered 3,4,8-c woy net structure. Remarkably, our Zr-TPA MOF achieved an unprecedented SO2 sorption capacity of 22.7 mmol g-1 at 298 K and 1 bar, surpassing those of all previously reported solid sorbents. We elucidated the distinct SO2 sorption behaviors observed in isostructural Zr-TPA variants synthesized with different capping modulators (formate, acetate, benzoate, and trifluoroacetate, abbreviated as FA, HAc, BA, and TFA, respectively) through computational analyses. These analyses revealed unexpected SO2-induced modulator-node dynamics, resulting in transient chemisorption that enhanced synergistic SO2 sorption. Additionally, we conducted a proof-of-concept experiment demonstrating that the captured SO2 in Zr-TPA-FA can be converted in situ into a valuable pharmaceutical intermediate known as aryl N-aminosulfonamide, with a high yield and excellent recyclability. This highlights the potential of robust Zr-MOFs for storing SO2 in catalytic applications. In summary, this work contributes significantly to the development of efficient SO2 solid sorbents and advances our understanding of the molecular mechanisms underlying SO2 sorption in Zr-MOF materials.

Elucidating the Competitive Adsorption of H2O and CO2 in CALF-20: New Insights for Enhanced Carbon Capture Metal-Organic Frameworks

In light of the pressing need for efficient carbon capture solutions, our study investigates the simultaneous adsorption of water (H2O) and carbon dioxide (CO2) as a function of relative humidity in CALF-20, a highly scalable and stable metal-organic framework (MOF). Advanced computer simulations reveal that due to their similar interactions with the framework, H2O and CO2 molecules compete for the same binding sites, occupying similar void regions within the CALF-20 pores. This competition results in distinct thermodynamic and dynamical behaviors of H2O and CO2 molecules, depending on whether one or both guest species are present. Notably, the presence of CO2 molecules forces the H2O molecules to form more connected hydrogen-bond networks within smaller regions, slowing water reorientation dynamics and decreasing water entropy. Conversely, the presence of water speeds up the reorientation of CO2 molecules, decreases the CO2 entropy, and increases the propensity for CO2 to be adsorbed within the framework due to stronger water-mediated interactions. Due to the competition for the same void spaces, both H2O and CO2 molecules exhibit slower diffusion when molecules of the other guest species are present. These findings offer valuable strategies and insights into enhancing the differential affinity of H2O and CO2 for MOFs specifically designed for carbon capture applications.