Degradation of Polyacrylates by One-Pot Sequential Dehydrodecarboxylation and Ozonolysis

Organophotoredox-Catalyzed Postfunctionalization of Poly(methacrylate) Derivatives via Radical-Polar Crossover Phosphonylation

Photoredox-catalyzed postfunctionalization of poly(meth)acrylate-based copolymers bearing phthalimide moieties can produce novel polymer architectures that are inaccessible using polymerization approaches; however, this method is restricted to radical reactions. To expand the scope of reactions applicable to photoredox-catalyzed postfunctionalization, this study focused on the radical-polar crossover (RPC) process, in which a carbocation equivalent is generated to react with nucleophiles. The organophotoredox-catalyzed reaction of a random copolymer of N-(methacryloxy)phthalimide and methyl acrylate using trialkyl phosphite nucleophiles afforded the corresponding phosphonate-containing polymers. Although simultaneous hydrogenation was inevitable, a novel polymer comprising dialkyl isopropenylphosphonate, propylene, and methyl acrylate units was obtained, which is of interest because phosphonate-containing polymers are potentially applicable as thermoresponsive materials, flame-retardant materials, and additives in Li-ion batteries. A series of copolymers with different components were successfully applied to the postfunctionalization method. The organophotoredox catalysis-based postfunctionalization strategy developed in this study provides versatile functional polymers in a simple, green, and sustainable manner.

Vinyl polymers with fully degradable carbon backbones enabled by aromatization-driven C-C bond cleavage

Degradation of carbon-backbone polymers, which make up most plastics, remains a formidable challenge owing to strong and inert main-chain C-C bonds. While incorporation of comonomers that generate backbone radicals under certain conditions can induce degradation of the polymer chain, such strategies yield complex oligomer mixtures. Here we report aromatization-driven C-C bond cleavage as a viable and powerful strategy to endow the degradability into carbon backbones using acrylic polymers as a model example. The key to this new strategy is the efficient, living, alternating addition copolymerization of acrylates with simple, commercially available and biorenewable coumarin using a frustrated Lewis pair cooperative catalyst. The resulting acrylic copolymers are strong, transparent thermoplastics with key thermal, optical, mechanical properties comparable or superior to poly(methyl methacrylate). Under strong base, alternating copolymers can completely degrade at room temperature through efficient cleavage of main-chain C-C bonds utilizing aromatization as a thermodynamic driving force, to generate pure, pharmaceutically valuable molecules, thus affording durable, robust yet fully degradable carbon-backbone acrylic polymers.

Photocatalytic Decarboxylative Heck-Type Postpolymerization Modification of Polyacrylates

Postpolymerization modification of commodity polymers has emerged as a powerful strategy for synthesizing functional polymers that are challenging to obtain via direct polymerization. Moreover, it offers opportunities to upcycle existing polymers and enhance their material properties. In this work, we introduce a photocatalytic decarboxylative Heck-type approach to upcycle polyacrylates. By employing an acridine-based photocatalyst in combination with a cobaloxime catalyst, hydrolyzed polyacrylates with varying carboxylic acid contents were efficiently converted into polymers bearing olefin functionalities. The degree of olefin incorporation notably influenced the thermal properties of the resulting materials. Importantly, this protocol is applicable to a broad range of vinyl comonomers, yielding 1,3-diene copolymers with exclusive 1,2-insertion selectivity. Furthermore, a variety of terminal alkenes can be utilized to functionalize the acrylate copolymers, and subsequent thiol-ene click reactions further expand the versatility of the accessible polymers.

Harnessing Non-Thermal External Stimuli for Polymer Recycling

Polymeric materials have become indispensable due to their versatility and low cost, yet their environmental impact presents a significant global challenge. Traditional chemical recycling methods typically rely on heat as a stimulus; for instance, pyrolysis is a popular chemical recycling methodology which faces limitations due to high energy consumption, low product selectivity, and the generation of undesirable byproducts. In response, recent advances in the promotion of depolymerization and degradation through alternative stimuli such as light, electrochemistry, and mechanical force, have shown promising potential for more efficient and selective polymer breakdown, yielding either the starting monomers or valuable small molecules. This perspective explores key examples of these emerging strategies, highlighting their potential to improve upon current protocols and offer alternative pathways under milder conditions, while identifying significant challenges that future research must address to translate promising chemistry into viable and broadly applicable recycling strategies.

Synthesis of highly effective polyester/polyacrylate compatibilizers using switchable polymerization

Multiblock copolymers (MBCPs) comprising polyester and polyacrylate segments offer an efficient strategy for enhancing the performance of polyester and polyolefin blends but synthesis and structural modification of these MBCPs remains challenging. Here, we propose a method for synthesizing MBCPs via the switchable polymerization of epoxides, cyclic anhydrides, and acrylates using a dinuclear Co-complex, wherein the anhydride acts as a switcher. Detailed studies on the copolymerization process reveal that the successful synthesis of MBCPs is achieved by intramolecular bimetallic synergistic catalysis, producing MBCPs with controlled molecular weights and narrow dispersities. Owing to the high compatibility of the monomers, this method allows for producing MBCPs with diverse structures and block numbers. Moreover, the resulting MBCPs effectively enhance the performance of the polyester and polyacrylate blends, improving the toughness of polyesters. Studies on microphase separation show that MBCPs can effectively compatibilize immiscible blends, highlighting their potential as compatibilizers.

Redox-Selective Macromolecular Electrolysis for Sequential Functionalization and Deconstruction

This study demonstrates that selective macromolecular electrolysis can be achieved on copolymers containing redox-orthogonal targets by controlling the externally applied voltage. We designed macromolecules containing phthalimide (E1/2 = -1.8 V vs Ag/AgNO3) and tetrachlorophthalimide (E1/2 = -1.3 V vs Ag/AgNO3) (meth)acrylates that have significantly different reduction potentials such that they are separately redox-addressable. The polymer-centered radicals generated by decarboxylation can either undergo (1) hydrogen atom transfer to form olefinic repeat units or (2) β-scission to deconstruct the polymer backbone. Our results reveal selective electrochemical control over postpolymerization modifications, which enables sequential transformations that tune the glass transition temperature of electrochemically generated copolymers over a range of -54 to 125 °C. This method was also shown to maintain its selectivity in a polymer blend and provided access to copolymers (poly(styrene-co-propylene-co-ethylene)) that would be challenging to prepare in other ways. These results demonstrate the potential of macromolecular electrolysis for selective material functionalization and degradation. This approach expands the toolbox for postpolymerization modification and targeted polymer degradation with applications in macromolecular information processing, spatiotemporal patterning, and producing materials with complex architectures that are driven by external stimuli.

Electrochemical Postpolymerization Modification and Deconstruction of Macromolecules

Electrolysis is an emerging approach to polymer postpolymerization modification, deconstruction, and depolymerization. Electrochemical reactions are particularly appealing for macromolecular transformations because of their high selectivity, ability to be externally monitored, and intrinsic scalability. Despite these desirable features and the recent resurgent use of small-molecule electrochemical reactions, the development of macromolecular electrolysis has been limited. Herein, we highlight recent examples of polymer transformations driven by heterogeneous redox chemistry. Throughout our exploration of macromolecular electrolysis, we provide our perspective on opportunities for continued investigation in this nascent field. Specifically, we highlight how targeted reaction development through deeper mechanistic insight will expand the scope of materials that can be (de)constructed with electrochemical methods. As this insight is developed, we expect macromolecular electrolysis to emerge as a high-functioning and complementary tool for macromolecular functionalization and deconstruction.

Acridine/Lewis Acid Complexes as Powerful Photocatalysts: A Combined Experimental and Mechanistic Study

A class of in-situ generated Lewis acid (LA) activated acridine complexes is reported, which act as potent photochemical catalysts for the oxidation of a variety of protected secondary amines. Acridine/LA complexes exhibit tunable excited state reduction potentials ranging from +2.07 to 2.38 V vs. SCE. The ytterbium triflate complex of 3,6-di-t-butyl-9-mesitylacridine catalyzes a photochemical Giese-type reaction of Boc-protected secondary amines with challenging conjugate acceptors such as acrylates, that are inaccessible to the analogous acridinium (t-Bu-Mes-Acr⊕) catalyzed reaction. The mechanism of this reaction was investigated using a suite of physical organic probes including intramolecular 13C kinetic isotope effects (KIEs), variable time normalization analysis (VTNA) kinetics, determination of redox potentials, and computational studies. In the reaction catalyzed by t-Bu-Mes-Acr⊕, mechanistic studies are consistent with single-electron transfer (SET) from the ground-state reduced t-Bu-Mes-Acr• to the α-keto radical intermediate as the first irreversible step in the catalytic cycle. Intriguingly, we find that the reduced acridine/LA complexes are better ground state reductants (-0.72 to -0.74 V vs SCE) relative to t-Bu-Mes-Acr• (-0.59 V vs SCE) and predict that the increased substrate reactivity stems from a lower energy barrier for this key SET event.

Photocatalytic Decarboxylative Alkylation of Cyclic Imine-BF3 Complexes: A Modular Route to Functionalized Azacycles

Alkyl radicals generated via an acridine photocatalyzed decarboxylation reaction of feedstock carboxylic acids engage with a range of cyclic imine-BF3 complexes to provide α-functionalized azacycles in an operationally simple process. A three-component variant of this transformation incorporating [1.1.1]propellane as an additional reaction partner enables the synthesis of valuable bicyclopentane (BCP)-containing azacycles. Reactions exhibit good functional group compatibility, enabling late-stage modification of complex bioactive molecules.

An Expedient Route to Bio-Based Polyacrylate Alternatives with Inherent Post-Chemical Modification and Degradation Capabilities by Organic Catalysis for Polymerization of Muconate Esters

The quest for polymers that would be at the same time bio-based and degradable after usage, in addition to offering chemical post-modification options, remains a daunting challenge in contemporary polymer science. Despite advances in polymer chemistry, attempts at controlling the chain-growth polymerization of muconate esters remain unexplored. Here we show that dialkyl muconates can be rapidly polymerized by organocatalyzed group transfer polymerization (O-GTP). O-GTP is conducted to completion at room temperature in toluene within a few minutes, using 1-ethoxy-1-(trimethylsiloxy)-1,3-butadiene (ETSB) as initiator and 1-tert-butyl-4,4,4-tris(dimethylamino)-2,2-bis[tris(dimethylamino)-phosphoranylidenamino]-2 λ ${\lambda }$ 5,4 λ ${\lambda }$ 5 catenadi(phosphazene) (P4-t-Bu) as catalyst. Chain extension experiments and synthesis of all muconate-type block copolymers can also be achieved. Furthermore, polymuconates are amenable to facile post-polymerization modification reactions. This is showcased through the hydrolysis of the ester side chains leading to well-defined poly(muconic acid), and by epoxidation of the C=C double bonds of the main chain. Last but not least, these internal alkene groups can be selectively cleaved by ozonolysis, demonstrating the upcyclability of polymuconates under oxidative conditions. This work demonstrates that polymuconates constitute a unique platform of bio-based polymers, easily modifiable in addition to being chemically degradable under user friendly experimental conditions.

Biomass-Derived Optically Clear Adhesives for Foldable Displays

Novel acrylate monomers, derived from terpenes are synthesized for use in optically clear adhesives (OCAs) suitable for foldable displays. These OCAs are prepared using visible-light-driven polymerization, an eco-friendly method. Through physical, rheological, and mechanical characterization, the prepared OCAs possess low modulus and exhibit outstanding creep and recovery properties, making them suitable for foldable devices.

Biomimetic Photoexcited Cobaloxime Catalysis in Organic Synthesis

Drawing inspiration from nature has long been a cornerstone of chemical innovation, with natural systems offering a wealth of untapped potential for discovery. In this minireview, we delve into the burgeoning field of cobaloxime catalysis in organic synthesis, which mimics the catalytic activity of the natural organometallic alkylcobalamine enzymes. Our focus lies on elucidating the latest advancements in this area, as well as delineating the primary mechanistic pathways at play. By describing, and comparing these mechanisms, we provide a comprehensive overview of the current state-of-the-art, while also shedding light on the key unresolved challenges that await further exploration.

Mechanochemical Backbone Editing for Controlled Degradation of Vinyl Polymers

The chemically inert nature of fully saturated hydrocarbon backbones endows vinyl polymers with desirable durability, but it also leads to their significant environmental persistence. Enhancing the sustainability of these materials requires a pivotal yet challenging shift: transforming the inert backbone into one that is degradable. Here, we present a versatile platform for mechanochemically editing the fully saturated backbone of vinyl polymers towards degradable polymer chains by integrating cyclobutene-fused succinimide (CBS) units along backbone through photo-iniferter reversible addition-fragmentation chain-transfer (RAFT) copolymerization. Significantly, the evenly insertion of CBS units does not compromise thermal or chemical stability but rather offers a means to adjust the properties of polymethylacrylate (PMA). Meanwhile, reactive acyclic imide units can be selectively introduced to the backbone through mechanochemical activation (pulse ultrasonication or ball-milling grinding) when required. Subsequent hydrolysis of the acyclic imide groups enables efficient degradation, yielding telechelic oligomers. This approach holds promise for inspiring the design and modification of more environmentally friendly vinyl polymers through backbone editing.

Plenty of Space in the Backbone: Radical Ring-Opening Polymerization

Radical polymerization is the most widely applied technique in both industry and fundamental science. However, its major drawback is that it typically yields polymers with non-functional, non-degradable all-carbon backbones-a limitation that radical ring-opening polymerization (rROP) allows to overcome. The last decade has seen a surge in rROP, primarily focused on creating degradable polymers. This pursuit has resulted in the creation of the first readily degradable materials through radical polymerization. Recent years have witnessed innovations in new monomers that address previous design limitations, such as ring strain and reactivity ratios. Furthermore, advances in integrating rROP with reversible deactivation radical polymerization (RDRP) have facilitated the incorporation of complex, customizable chemical payloads into the main polymer chain. This short review discusses the latest developments in monomer design with a focused analysis of their limitations in a broader historical context. Recently evolving strategies for compatibility of rROP monomers with RDRP are discussed, which are key to precision polymer synthesis. The latest chemistry surveyed expands the horizon beyond mere hydrolytic degradation. Now is the time to explore the chemical potential residing in the previously inaccessible polymer backbone.

Mild Catalytic Degradation of Crystalline Polyethylene Units in a Solid State Assisted by Carboxylic Acid Groups

Crystalline polyethylenes bearing carboxylic acid groups in the main chain were successfully degraded with a Ce catalyst and visible light. The reaction proceeds in a crystalline solid state without swelling in acetonitrile or water at a reaction temperature as low as 60 or 80 °C, employing dioxygen in air as the only stoichiometric reactant with nearly quantitative recovery of carbon atoms. Heterogeneous features of the reaction allowed us to reveal a dynamic morphological change of polymer crystals during the degradation.

Chemically Recyclable, High Molar Mass Polyoxazolidinones via Ring-Opening Metathesis Polymerization

The development of robust methods for the synthesis of chemically recyclable polymers with tunable properties is necessary for the design of next-generation materials. Polyoxazolidinones (POxa), polymers with five-membered urethanes in their backbones, are an attractive target because they are strongly polar and have high thermal stability, but existing step-growth syntheses limit molar masses and methods to chemically recycle POxa to monomer are rare. Herein, we report the synthesis of high molar mass POxa via ring-opening metathesis polymerization of oxazolidinone-fused cyclooctenes. These novel polymers show <5% mass loss up to 382-411 °C and have tunable glass transition temperatures (14-48 °C) controlled by the side chain structure. We demonstrate facile chemical recycling to monomer and repolymerization despite moderately high monomer ring-strain energies, which we hypothesize are facilitated by the conformational restriction introduced by the fused oxazolidinone ring. This method represents the first chain growth synthesis of POxa and provides a versatile platform for the study and application of this emerging subclass of polyurethanes.

Selective Electrochemical Modification and Degradation of Polymers

We demonstrate that electrochemical-induced decarboxylation enables reliable post-polymerization modification and degradation of polymers. Polymers containing N-(acryloxy)phthalimides were subjected to electrochemical decarboxylation under mild conditions, which led to the formation of transient alkyl radicals. By installing these redox-active units, we systematically modified the pendent groups and chain ends of polyacrylates. This approach enabled the production of poly(ethylene-co-methyl acrylate) and poly(propylene-co-methyl acrylate) copolymers, which are difficult to synthesize by direct polymerization. Spectroscopic and chromatographic techniques reveal these transformations are near-quantitative on several polymer systems. Electrochemical decarboxylation also enables the degradation of all-methacrylate poly(N-(methacryloxy)phthalimide-co-methyl methacrylate) copolymers with a degradation efficiency of >95 %. Chain cleavage is achieved through the decarboxylation of the N-hydroxyphthalimide ester and subsequent β-scission of the backbone radical. Electrochemistry is thus shown to be a powerful tool in selective polymer transformations and controlled macromolecular degradation.

Photocatalytic Upcycling and Depolymerization of Vinyl Polymers

Photocatalytic upcycling and depolymerization of vinyl polymers have emerged as promising strategies to combat plastic pollution and promote a circular economy. This mini review critically summarizes current developments in the upcycling and degradation of vinyl polymers including polystyrene and poly(meth)acrylates. Of these material classes, polymethacrylates possess the unique possibility to undergo a photocatalytic depolymerization back to monomer under thermodynamically favourable conditions, thus presenting significant advantages over traditional thermal strategies. Our perspective on current formidable challenges and potential future directions are also discussed.

Light-driven polymer recycling to monomers and small molecules

Only a small proportion of global plastic waste is recycled, of which most is mechanically recycled into lower quality materials. The alternative, chemical recycling, enables renewed production of pristine materials, but generally comes at a high energy cost, particularly for processes like pyrolysis. This review focuses on light-driven approaches for chemically recycling and upcycling plastic waste, with emphasis on reduced energy consumption and selective transformations not achievable with heat-driven methods. We focus on challenging to recycle backbone structures composed of mainly C‒C bonds, which lack functional groups i.e., esters or amides, that facilitate chemical recycling e.g., by solvolysis. We discuss the use of light, either in conjunction with heat to drive depolymerization to monomers or via photocatalysis to transform polymers into valuable small molecules. The structural prerequisites for these approaches are outlined, highlighting their advantages as well as limitations. We conclude with an outlook, addressing key challenges, opportunities, and provide guidelines for future photocatalyst (PC) development.

Bulk Depolymerization of Methacrylate Polymers via Pendent Group Activation

In this study, we present an efficient approach for the depolymerization of poly(methyl methacrylate) (PMMA) copolymers synthesized via conventional radical polymerization. By incorporating low mol % phthalimide ester-containing monomers during the polymerization process, colorless and transparent polymers closely resembling unfunctionalized PMMA are obtained, which can achieve >95% reversion to methyl methacrylate (MMA). Notably, our catalyst-free bulk depolymerization method exhibits exceptional efficiency, even for high-molecular-weight polymers, including ultrahigh-molecular-weight (106-107 g/mol) PMMA, where near-quantitative depolymerization is achieved. Moreover, this approach yields polymer byproducts of significantly lower molecular weight, distinguishing it from bulk depolymerization methods initiated from chain ends. Furthermore, we extend our investigation to polymethacrylate networks, demonstrating high extents of depolymerization. This innovative depolymerization strategy offers promising opportunities for the development of sustainable polymethacrylate materials, holding great potential for various applications in polymer science.

The thermodynamics and kinetics of depolymerization: what makes vinyl monomer regeneration feasible?

Depolymerization is potentially a highly advantageous method of recycling plastic waste which could move the world closer towards a truly circular polymer economy. However, depolymerization remains challenging for many polymers with all-carbon backbones. Fundamental understanding and consideration of both the kinetics and thermodynamics are essential in order to develop effective new depolymerization systems that could overcome this problem, as the feasibility of monomer generation can be drastically altered by tuning the reaction conditions. This perspective explores the underlying thermodynamics and kinetics governing radical depolymerization of addition polymers by revisiting pioneering work started in the mid-20th century and demonstrates its connection to exciting recent advances which report depolymerization reaching near-quantitative monomer regeneration at much lower temperatures than seen previously. Recent catalytic approaches to monomer regeneration are also explored, highlighting that this nascent chemistry could potentially revolutionize depolymerization-based polymer recycling in the future.

Selective Electrocatalytic Degradation of Ether-Containing Polymers

Leveraging electrochemistry to degrade robust polymeric materials has the potential to impact society's growing issue of plastic waste. Herein, we develop an electrocatalytic oxidative degradation of polyethers and poly(vinyl ethers) via electrochemically mediated hydrogen atom transfer (HAT) followed by oxidative polymer degradation promoted by molecular oxygen. We investigated the selectivity and efficiency of this method, finding our conditions to be highly selective for polymers with hydridic, electron-rich C-H bonds. We leveraged this reactivity to degrade polyethers and poly(vinyl ethers) in the presence of polymethacrylates and polyacrylates with complete selectivity. Furthermore, this method made polyacrylates degradable by incorporation of ether units into the polymer backbone. We quantified degradation products, identifying up to 36 mol % of defined oxidation products, including acetic acid, formic acid, and acetaldehyde, and we extended this method to degrade a polyether-based polyurethane in a green solvent. This work demonstrates a facile, electrochemically-driven route to degrade polymers containing ether functionalities.

Umpolung Isomerization in Radical Copolymerization of Benzyl Vinyl Ether with Pentafluorophenylacrylate Leading to Degradable AAB Periodic Copolymers

This study revealed that benzyl vinyl ether (BnVE) shows a peculiar isomerization propagation in its radical copolymerization with an electron-deficient acrylate carrying a pentafluorophenyl group (PFA). The co-monomer pair inherently exhibits the cross-over propagation feature due to the large difference in the electron density. However, the radical species of PFA was found to undergo a backward isomerization to the penultimate BnVE pendant giving a benzyl radical species prior to propagation with BnVE. The isomerization brings a drastic change in the character of the growing radical species from electrophilic to nucleophilic, and thus the isomerized benzyl radial species propagates with PFA. Consequently, the two monomers were consumed in the order AAB (A: PFA; B: BnVE) and the unique periodic consumption was confirmed by the pseudo-reactivity ratios calculated by the penultimate model: r11 =0.174 and r21 =6600 for PFA (M1 ) with BnVE (M2 ). The pentafluorophenyl ester groups of the resulting copolymers are transformed into ester and amide groups by post-polymerization alcoholysis and aminolysis modifications. The unique isomerization in the AAB sequence allowed the periodic introduction of a benzyl ether structure in the backbone leading to efficient degradation under acid conditions.

Macromolecular Photoediting Using Single-Electron Logic

Accessing the chemistry of reactive intermediates under mild conditions has significantly expanded the available chemical space for molecular transformations. Nowhere is this more apparent than in the context of photoredox catalysis. Despite abundant literature precedents for using this powerful methodology to build complex targets, there are comparatively few reports that leverage photoredox catalysis for macromolecular editing. Here, we report a mild photoredox approach that enables both the functionalization and degradation of polyalkenamers to valuable feedstocks. Irradiation with visible light (including natural sunlight) in the presence of a pyrillium photoredox catalyst promoted facile chain scission in a variety of substrates. This metal-free approach transformed high molar mass materials (>300 kDa) to low molar mass species (<15 kDa) within 10 min. Moreover, we could completely degrade macromolecules into a range of useful targets (C16-C29 species) within 96 h. Mechanistic and kinetic experiments were carried out to understand this reactivity, which could be coupled with hydrofunctionalizations to create tailored products.

Biomass-Derived Degradable Polymers via Alternating Ring-Opening Metathesis Polymerization of Exo-Oxanorbornenes and Cyclic Enol Ethers

Degradable polymers made via ring-opening metathesis polymerization (ROMP) hold tremendous promise as eco-friendly materials. However, most of the ROMP monomers are derived from petroleum resources, which are typically considered less sustainable compared to biomass. Herein, we present a synthetic strategy to degradable polymers by harnessing alternating ROMP of biomass-based cyclic olefin monomers including exo-oxanorbornenes and cyclic enol ethers. A library of well-defined poly(enol ether)s with modular structures, tunable glass transition temperatures, and controlled molecular weights was achieved, demonstrating the versatility of this approach. Most importantly, the resulting copolymers exhibit high degrees of alternation, rendering their backbones fully degradable under acidic conditions.

Alternating styrene-propylene and styrene-ethylene copolymers prepared by photocatalytic decarboxylation

Synthesis of olefin-styrene copolymers with defined architecture is challenging due to the limitations associated with the inherent reactivity ratios for these monomers in radical or metal-catalyzed polymerizations. Herein, we developed a straightforward approach to alternating styrene-propylene and styrene-ethylene copolymers by combining radical polymerizations and powerful post-polymerization modification reactions. We employed reversible addition-fragmentation chain transfer (RAFT) copolymerization between styrene derivatives and saccharin (meth)acrylamide to generate alternating copolymers. Once polymerized, the amide bond of the saccharin monomers was highly reactive toward hydrolysis, an observation exploited to obtain alternating styrene-acrylic acid/methacrylic acid copolymers. Subsequent mild decarboxylation of the (meth)acrylic acid groups in the presence of a photocatalyst and a hydrogen source under visible light resulted in the styrene-alt-ethylene/propylene copolymers. Alternating copolymers comprised of either propylene or ethylene units alternating with functional styrene derivatives were also prepared, illustrating the compatibility of this approach for functional polymer synthesis. Finally, the thermal properties of the alternating copolymers were compared to those from statistical copolymer analogs to elucidate the effect of microarchitecture and styrene substituents on the glass transition temperature.