A 2D Semiquinone Radical-Containing Microporous Magnet with Solvent-Induced Switching from Tc = 26 to 80 K

Gas-Induced Electrical and Magnetic Modulation of Two-Dimensional Conductive Metal-Organic Framework

Controlled modulation of electronic and magnetic properties in stimuli-responsive materials provides valuable insights for the design of magnetoelectric or multiferroic devices. This paper demonstrates the modulation of electrical and magnetic properties of a semiconductive, paramagnetic metal-organic framework (MOF) Cu3(C6O6)2 with small gaseous molecules, NH3, H2S, and NO. This study merges chemiresistive and magnetic tests to reveal that the MOF undergoes simultaneous changes in electrical conductance and magnetization that are uniquely modulated by each gas. The features of response, including direction, magnitude, and kinetics, are modulated by the physicochemical properties of the gaseous molecules. This study advances the design of multifunctional materials capable of undergoing simultaneous changes in electrical and magnetic properties in response to chemical stimuli.

Magnetic structure and properties of the honeycomb antiferromagnet [Na(OH2)3]Mn(NCS)3

We report the magnetic structure and properties of a thiocyanate-based honeycomb magnet [Na(OH2)3]Mn(NCS)3 which crystallises in the unusual low-symmetry trigonal space group P3̄. Magnetic measurements on powder samples show this material is an antiferromagnet (ordering temperature TN,mag = 18.1(6) K) and can be described by nearest neighbour antiferromagnetic interactions J = -11.07(4) K. A method for growing neutron-diffraction sized single crystals (>10 mm3) is demonstrated. Low temperature neutron single crystal diffraction shows that the compound adopts the collinear antiferromagnetic structure with TN,neut = 18.94(7) K, magnetic space group P3̄'. Low temperature second-harmonic generation (SHG) measurements provide no evidence of breaking of the centre of symmetry.

Two-Dimensional Cobalt(II) Benzoquinone Frameworks for Putative Kitaev Quantum Spin Liquid Candidates

The realization and discovery of quantum spin liquid (QSL) candidate materials are crucial for exploring exotic quantum phenomena and applications associated with QSLs. Most existing metal-organic two-dimensional (2D) quantum spin liquid candidates have structures with spins arranged on the triangular or kagome lattices, whereas honeycomb-structured metal-organic compounds with QSL characteristics are rare. Here, we report the use of 2,5-dihydroxy-1,4-benzoquinone (X2dhbq, X = Cl, Br, H) as the linkers to construct cobalt(II) honeycomb lattices (NEt4)2[Co2(X2dhbq)3] as promising Kitaev-type QSL candidate materials. The high-spin d7 Co2+ has pseudospin-1/2 ground-state doublets, and benzoquinone-based linkers not only provide two separate superexchange pathways that create bond-dependent frustrated interactions but also allow for chemical tunability to mediate magnetic coupling. Our magnetization data show antiferromagnetic interactions between neighboring metal centers with Weiss constants from -5.1 to -8.5 K depending on the X functional group in X2dhbq linkers (X = Cl, Br, H). No magnetic transition or spin freezing could be observed down to 2 K. Low-temperature susceptibility (down to 0.3 K) and specific heat (down to 0.055 K) of (NEt4)2[Co2(H2dhbq)3] were further analyzed. Heat capacity measurements confirmed no long-range order down to 0.055 K, evidenced by the broad peak instead of the λ-like anomaly. Our results indicate that these 2D cobalt benzoquinone frameworks are promising Kitaev QSL candidates with chemical tunability through ligands that can vary the magnetic coupling and frustration.

CO2-Sensitive Porous Magnet: Antiferromagnet Creation from a Paramagnetic Charge-Transfer Layered Metal-Organic Framework

Porous magnets that undergo a magnetic phase transition in response to gaseous adsorbates are desirable for the development of sustainable sensing and memory devices. Familiar gases such as O2 and CO2 are one class of target adsorbates because of their close association with life sciences and environmental issues; however, it is not easy to develop magnetic devices that respond to these ubiquitous gases. To date, only three examples of gas-responsive magnetic phase transitions have been demonstrated: (i) from a ferrimagnet to an antiferromagnet, (ii) its vice versa (i.e., change of magnetic phase), and (iii) from a ferrimagnet to a paramagnet (i.e., erasure of the magnetic phase). However, the creation of a magnet, meaning the change from a nonmagnet to a magnet by O2 or CO2 gas adsorption and magnetic switching by this phenomenon have not yet been explored. Herein, we report a CO2-induced antiferromagnet modified from a paramagnetic charge-flexible layered compound, [{Ru2(2,4-F2PhCO2)4}2TCNQ(OEt)2] (1; 2,4-F2PhCO2- = 2,4-difluorobenzoate; TCNQ(OEt)2 = 2,5-diethoxy-7,7,8,8-tetracyanoquinodimethane), where three molar equivalents of CO2 was accommodated at a CO2 pressure of 100 kPa. The magnetic change originates from charge fluctuation due to the transfer of electrons moving from the electron-donor to the electron-acceptor unit or vice versa, resulting in a change in the electron distribution induced by CO2 adsorption/desorption in the donor-acceptor-type charge transfer framework. Owing to the reversible electronic state change upon CO2 adsorption/desorption, these magnetic phases are switched, accompanied by modification of the electrical conductivity, which is boosted by the CO2 accommodation. This is the first example of the creation of a CO2-responsive magnet, which is promising for novel molecular multifunctional devices.

Expanding the horizons of porphyrin metal-organic frameworks via catecholate coordination: exploring structural diversity, material stability and redox properties

Porphyrin based Metal-Organic Frameworks (MOFs) have generated high interest because of their unique combination of light absorption, electron transfer and guest adsorption/desorption properties. In this study, we expand the range of available MOF materials by focusing on the seldom studied porphyrin ligand H10TcatPP, functionalized with tetracatecholate coordinating groups. A systematic evaluation of its reactivity with M(iii) cations (Al, Fe, and In) led to the synthesis and isolation of three novel MOF phases. Through a comprehensive characterization approach involving single crystal and powder synchrotron X-ray diffraction (XRD) in combination with the local information gained from spectroscopic techniques, we elucidated the structural features of the solids, which are all based on different inorganic secondary building units (SBUs). All the synthesized MOFs demonstrate an accessible porosity, with one of them presenting mesopores and the highest reported surface area to date for a porphyrin catecholate MOF (>2000 m2 g-1). Eventually, the redox activity of these solids was investigated in a half-cell vs. Li with the aim of evaluating their potential as electrode positive materials for electrochemical energy storage. One of the solids displayed reversibility during cycling at a rather high potential (∼3.4 V vs. Li+/Li), confirming the interest of redox active phenolate ligands for applications involving electron transfer. Our findings expand the library of porphyrin-based MOFs and highlight the potential of phenolate ligands for advancing the field of MOFs for energy storage materials.

Two-Dimensional Metal-Organic Frameworks Towards Spintronics

The intrinsic properties of predesignable topologies and tunable electronic structures, coupled with the increase of electrical conductivity, make two-dimensional metal-organic frameworks (2D MOFs) highly prospective candidates for next-generation electronic/spintronic devices. In this Minireview, we present an outline of the design principles of 2D MOF-based spintronics materials. Then, we highlight the spin-transport properties of 2D MOF-based organic spin valves (OSVs) as a notable achievement in the progress of 2D MOFs for spintronics devices. After that, we discuss the potential for spin manipulation in 2D MOFs with bipolar magnetic semiconductor (BMS) properties as a promising field for future research. Finally, we provide a brief summary and outlook to encourage the development of novel 2D MOFs for spintronics applications.

Quinoid-Based Three-Dimensional Metal-Organic Framework Fe2(dhbq)3: Porosity, Electrical Conductivity, and Solid-State Redox Properties

We report the synthesis, characterization, and electronic properties of the quinoid-based three-dimensional metal-organic framework [Fe₂(dhbq)₃]. The MOF was synthesized without using cations as a template, unlike other reported X₂dhbq₃-based coordination polymers, and the crystal structure was determined by using single-crystal X-ray diffraction. The crystal structure was entirely different from the other reported [Fe₂(X₂dhbq₃)]^2-; three independent 3D polymers were interpenetrated to give the overall structure. The absence of cations led to a microporous structure, investigated by N₂ adsorption isotherms. Temperature dependence of electrical conductivity data revealed that it exhibited a relatively high electrical conductivity of 1.2 × 10^-2 S cm^-1 (E_a = 212 meV) due to extended d-π conjugation in a three-dimensional network. Thermoelectromotive force measurement revealed that it is an n-type semiconductor with electrons as the majority of charge carriers. Structural characterization and spectroscopic analyses, including SXRD, Mössbauer, UV-vis-NIR, IR, and XANES measurements, evidenced the occurrence of no mixed valency based on the metal and the ligand. [Fe₂(dhbq)₃] upon incorporating as a cathode material for lithium-ion batteries engendered an initial discharge capacity of 322 mAh/g.

Role of Counterions in the Structural Stabilisation of Redox-Active Metal-Organic Frameworks

The crystal structures of metal-organic frameworks (MOFs) are typically determined by the strong chemical bonds formed between the organic and inorganic building units. However, the latest generation of redox-active frameworks often rely on counterions in the pores to access specific charge states of the components. Here, we model the crystal structures of three layered MOFs based on the redox-active ligand 2,5-dihydroxybenzoquinone (dhbq): Ti2 (Cl2 dhbq)3 , V2 (Cl2 dhbq)3 and Fe2 (Cl2 dhbq)3 with implicit and explicit counterions. Our full-potential first-principles calculations indicate that while the reported hexagonal structure is readily obtained for Ti and V, the Fe framework is stabilised only by the presence of explicit counterions. For high counterion concentrations, we observe the formation of an electride-like pocket in the pore center. An outlook is provided on the implications of solvent and counterion control for engineering the structures and properties of porous solids.

Ä-Coupling Dielectric Functionality with Magnetic Properties in Coordination Metal Complexes

Significant research has been conducted on molecular ferroelectric materials, including pure organic and inorganic compounds; however, studies on ferroelectric materials based on coordination metal complexes are scarce. Ferroelectric materials based on coordination metal complexes have tunable structures and designs, with coexistence or synergy between the ferroelectric behavior and magnetic properties. Compared to inorganic compounds, few coordination metal complexes exhibit coupling between the magnetic and dielectric properties. Coordination metal complexes with strong coupling between the magnetic and dielectric properties exhibit dielectric permittivity variations under external magnetic fields. Therefore, they have attracted substantial interest for their potential use in magnetoelectric devices. In this review, we discuss recent advances in coordination metal complexes, that exhibit coupled magnetic functionalities and ferroelectricity or dielectric properties, including single-molecule magnets, electron delocalization systems, and external stimuli responsive compounds.

Mechanochemical Access to Catechol-Derived Metal-Organic Frameworks

Mechanochemistry, a resurging synthetic approach, has been developed into an effective and controllable method to access a family of crystalline porous catechol-derived metal-organic frameworks (MOFs) for the first time. We have identified that the obtained crystalline phase is readily tunable by precursors and the addition of solvents or drying agents. The described mechanochemistry allows us to synthesize these materials in a highly sustainable manner. Thus, mechanochemistry is expected to pave a promising avenue to access a broader class of MOF materials, in addition to those based on the motifs of carboxylic acid or imidazole.

Framework Dimensional Control Boosting Charge Storage in Conjugated Coordination Polymers

Conjugated coordination polymers (CCPs) with extended π-d conjugation, which can effectively promote long-range delocalization of electrons and enhance conductivity, are superior to traditional metal-organic frameworks (MOFs) and attracted great attention for potential applications in chemical sensors, electronics, energy conversion/storage devices, etc. However, the precise construction of CCPs is still challenging due to the complex and uncontrollable reactions of CCPs. Herein, two different framework dimensions of CCPs are controllably realized by employing the same ligand (2,3,5,6-tetraaminobenzoquinone (TABQ)) and the same metal (copper) as center ions. The manipulation of reaction leads to different valences of ligands and metal ions, different coordination geometries, and thereby 1D-CuTABQ and 2D-CuTABQ frameworks, respectively. High performance of charge storage is hence achieved involving the storage of both cations and anions, and therein, 2D-CuTABQ shows a high reversible capacity of ≈305 mAh g^-1 , good rate capability and high capacity retention (≈170 mAh g^-1 after 2000 cycles at 5 A g^-1 with 0.01% decay per cycle), which outperforms 1D-CuTABQ and almost all of the reported MOFs as cathodes for batteries. These results highlight the delicate structural control of CCPs for high-performance batteries and other various applications.

Inter-layer magnetic tuning by gas adsorption in π-stacked pillared-layer framework magnets

Magnetism of layered magnets depends on the inter-layer through-space magnetic interactions (J NNNI). Using guest sorption to address inter-layer pores in bulk-layered magnets is an efficient approach to magnetism control because the guest-delicate inter-layer distance (l trans) is a variable parameter for modulating J NNNI. Herein, we demonstrated magnetic changes induced by the adsorption of CO2, N2, and O2 gases in various isostructural layered magnets with a π-stacked pillared-layer framework, , (M = Co, 1, Fe, 2, Cr, 3; Cp* = η5-C5Me5; 2,3,5,6-F4PhCO2 - = 2,3,5,6-tetrafluorobenzoate; TCNQ = 7,7,8,8-tetracyano-p-quinodimethane). Each compound had almost identical adsorption capability for the three types of gases; only CO2 adsorption was found to have a gated profile. A breathing-like structural modulation involving the extension of l trans occurred after the insertion of gases into the isolated pores between the [Ru2]2-TCNQ ferrimagnetic layers, which is more significant for CO2 than for O2 and N2, due to the CO2-gated transition. While adsorbent 1 with M = Co (S = 0) was an antiferromagnet with T N = 75 K, 1⊃CO2 was a ferrimagnet with T C = 76 K, whereas 1⊃N2 and 1⊃O2 were antiferromagnets with T N = 68 K. The guest-insertion effect was similarly confirmed in 2 and 3, and was characteristically dependent on the type of sandwiched spin in as M = Fe (S = 1/2) and Cr (S = 3/2), respectively. This study reveals that common gases such as CO2, O2, and N2 can serve as crucial triggers for the change in magnetism as a function of variable parameter l trans.

Geometry-dependent valence tautomerism, magnetism, and electrical conductivity in 1D iron–tetraoxolene chains

Here we show how a simple change in the geometry of 1D iron–tetraoxolene chains dramatically alters the observed physical properties, including the presence of valence tautomerism, strong magnetic coupling, and electrical conductivity.

Series of Benzoquinone-Bridged Dicobalt(II) Single-Molecule Magnets

Mononuclear complexes within a particular coordination geometry have been well recognized for high-performance single-molecule magnets (SMMs), while the incorporation of such well-defined geometric ions into multinuclear complexes remains less explored. Using the rigid 2-(di(1H-pyrazol-1-yl)methyl)-6-(1H-pyrazol-1-yl)pyridine (PyPz₃) ligand, here, we prepared a series of benzoquinone-bridged dicobalt(II) SMMs [{(PyPz₃)Co}₂(L)][PF₆]₂, (1, L = 2,5-dioxo-1,4-benzoquinone (dhbq^2-); 2, L = chloranilate (CA^2-); and 3, L = bromanilate (BA^2-)), in which each Co(II) center adopts a distorted trigonal prismatic (TPR) geometry and the distortion increases with the sizes of 3,6-substituent groups (H (1) < Cl (2) < Br (3)). Accordingly, the magnetic study revealed that the axial anisotropy parameter (D) of the Co ions decreased from -78.5 to -56.5 cm^-1 in 1-3, while the rhombic one (E) increased significantly. As a result, 1 exhibited slow relaxation of magnetization under a zero dc field, while both 2 and 3 showed only the field-induced SMM behaviors, likely due to the increased rhombic anisotropy that leads to the serious quantum tunneling of the magnetization. Our study demonstrated that the relaxation dynamics and performances of a multinuclear complex are strongly dependent on the coordination geometry of the local metal ions, which may be engineered by modifying the substituent groups.

Transition-Metal Interlink Neural Network: Machine Learning of 2D Metal-Organic Frameworks with High Magnetic Anisotropy

Two-dimensional (2D) metal-organic framework (MOF) materials with large perpendicular magnetic anisotropy energy (MAE) are important candidates for high-density magnetic storage. The MAE-targeted high-throughput screening of 2D MOFs is currently limited by the time-consuming electronic structure calculations. In this study, a machine learning model, namely, transition-metal interlink neural network (TMINN) based on a database with 1440 2D MOF materials is developed to quickly and accurately predict MAE. The well-trained TMINN model for MAE successfully captures the general correlation between the geometrical configurations and the MAEs. We explore the MAEs of 2583 other 2D MOFs using our trained TMINN model. From these two databases, we obtain 11 unreported 2D ferromagnetic MOFs with MAEs over 35 meV/atom, which are further demonstrated by the high-level density functional theory calculations. Such results show good performance of the extrapolation predictions of TMINN. We also propose some simple design rules to acquire 2D MOFs with large MAEs by building a Pearson correlation coefficient map between various geometrical descriptors and MAE. Our developed TMINN model provides a powerful tool for high-throughput screening and intentional design of 2D magnetic MOFs with large MAE.

Multi-Redox Responsive Behavior in a Mixed-Valence Semiconducting Framework Based on Bis-[1,2,5]-thiadiazolo-tetracyanoquinodimethane

The two-dimensional (2-D) framework, [Cu(BTDAT)(MeOH)] {BTDAT = bis-[1,2,5]-thiadiazolo-tetracyanoquinodimethane}, possesses remarkable multi-step redox properties, with electrochemical studies revealing six quasi-stable redox states in the solid state. In situ electron paramagnetic resonance and visible-near infrared spectroelectrochemistry elucidated the mechanism for these multi-step redox processes, as well as the optical and electrochromic behavior of the BTDAT ligand and framework. In studying the structural, spectroscopic, and electronic properties of [Cu(BTDAT)(MeOH)], the as-synthesized framework was found to exist in a mixed-valence state with thermally-activated semiconducting behavior. In addition to pressed pellet conductivity measurements, single-crystal conductivity measurements using a pre-patterned polydimethylsiloxane layer on a silicon substrate provide important insights into the anisotropic conduction pathways. As an avenue to further understand the electronic state of [Cu(BTDAT)(MeOH)], computational band structure calculations predicted delocalized electronic transport in the framework. On the balance of probabilities, we propose that [Cu(BTDAT)(MeOH)] is a Mott insulator (i.e., electron correlations cause a metal-insulator transition). This implies that the conductivity is incoherent. However, we are unable to distinguish between activated transport due to Coulombically bound electron-hole pairs and a hopping mechanism. The combined electrochemical, electronic, and optical properties of [Cu(BTDAT)(MeOH)] shine a new light on the experimental and theoretical challenges for electroactive framework materials, which are implicated as the basis of advanced optoelectronic and electrochromic devices.

Effects of cis/trans-Configuration and Ligand Substitution of the Cyanidometal Bridge on Metal to Metal Charge Transfer Properties in Mixed Valence Complexes

To investigate the effects of cis/trans-configuration of the cyanidometal bridge and the electron donating ability of the auxiliary ligand on the cyanidometal bridge on metal to metal charge transfer (MMCT) in cyanidometal-bridged mixed valence compounds, two groups of trinuclear cyanidometal-bridged compounds cis/trans-[Cp(dppe)Fe(μ-NC)Ru(4,4'-dmbpy)₂ (μ-CN)Fe(dppe)Cp][PF₆ ]_n (n=2 (cis/trans-1[PF₆ ]₂ ), 3 (cis/trans-1[PF₆ ]₃ ), 4 (cis/trans-1[PF₆ ]₄ )) and cis/trans-[Cp(dppe)Fe(μ-NC)Ru(bpy)₂ (μ-CN)Fe(dppe)Cp][PF₆ ]₃ (cis/trans-2[PF₆ ]₃ ) were synthesized and fully characterized. The experimental results indicate that for these one- and two-electron oxidation mixed valence compounds, the trans-configuration compounds are more beneficial for MMCT than the cis-configuration compounds, and increasing the electron donating ability of the auxiliary ligand on the cyanidometal bridge is also conductive to MMCT. Moreover, compounds cis/trans-1[PF₆ ]_n (n=3, 4) and cis/trans-2[PF₆ ]₃ belong to localized compounds by analyzing the experimental characterization results, supported by the TDDFT calculations.

Syntheses, Structures, and Properties of Coordination Polymers with 2,5-Dihydroxy-1,4-Benzoquinone and 4,4'-Bipyridyl Synthesized by In Situ Hydrolysis Method

The coordination polymers (CPs) with binary ligands, including 2,5-dihydroxy-1,4-benzoquinone (H2DHBQ) and 4,4'-bipyridyl (bpy), were synthesized using in situ hydrolysis of 2,5-dimethoxy-1,4-benzoquinone (DMBQ). Three kinds of CPs were obtained depending on the metal ions. For M = Mn and Zn, a 1D zigzag chain structure with cis conformation ( cis-1D-M) was obtained, whereas Co, Ni, and Cu compounds afforded a 2D net structure with trans conformation (trans -2D-M) with a 1D pore. A linear chain structure was also obtained for M = Cu. Magnetic susceptibility (χ_M T) at 300 K in cis -1D-Mn and trans -2D-Co was evaluated to be 4.421 and 2.950 cm³ K mol^-1, respectively, indicating that both compounds are in the high-spin state. According to the N₂ adsorption isotherms at 77 K, trans -2D-Ni showed microporosity with the BET surface area of 177 m² g^-1, whereas the isomorphic trans -2D-Co rarely adsorbed N₂ at 77 K. This phenomenon was explained by the difference of diffusion kinetics of the adsorbent molecules, which was supported by the CO₂ adsorption isotherms at 195 K. The optical band gaps of cis -1D-Mn, cis -1D-Zn, trans -2D-Co, and trans -2D-Ni were estimated to be 1.6, 1.8, 1.0, and 1.1 eV, respectively, by using UV-vis-NIR spectroscopy.

Glycols in the Synthesis of Zinc-Anilato Coordination Polymers

We report the synthesis, structural investigation, and thermal behavior for three zinc-based 1D-coordination polymers with 3,6-di-tert-butyl-2,5-dihydroxy-p-benzoquinone, which were synthesized in the presence of different glycols. The interaction of zinc nitrate with glycols, followed by using the resulting solution in solvothermal synthesis with the anilate ligand in DMF, makes it possible to obtain linear polymer structures with 1,2-ethylene or 1,2-propylene glycols coordinated to the metal. The reaction involving 1,3-propylene glycol under similar conditions gives a crystal structure that does not contain a diol. The crystal and molecular structures of the synthesized compounds were determined using single crystal by X-ray structural analysis. The influence of glycol molecules coordinated to the metal on the thermal destruction of synthesized compounds is shown.

Mixed valency in a neutral 1D Fe-chloranilate coordination polymer

A neutral Fe-chloranilate chain, with triphenylphosphine oxide co-ligands, represents a rare example of a one-dimensional chain in which there is a temperature dependent electron transfer from the Fe(ii) centre to the bridging chloranilate ligand.

Combined Experimental/Theoretical Study on the Luminescent Properties of Homoleptic/Heteroleptic Erbium(III) Anilate-Based 2D Coordination Polymers

The synthesis, structural and photophysical characterization, and theoretical studies on homo/heteroleptic neutral 2D-layered coordination polymers (CPs), obtained by combining the Er^III ion with chlorocyananilate (ClCNAn) and/or tetrafluoroterephthalate (F₄BDC) linkers, are herein reported. The structure of the heteroleptic Er^III-based CP, formulated as [Er₂(ClCNAn)₂(F₄BDC)(DMSO)₆]_n (1) is also reported. 1 crystallizes in the triclinic P1̅ space group, and the structure consists of neutral 2D layers formed by Er^III ions linked through the two linkers oriented in such a way that the neighboring 2D layers are eclipsed along the a axis, leading to parallelogram-like cavities. Photophysical measurements highlight the prominent role of chlorocyananilate linkers as optical antennas toward lanthanide ions, while wave-function-theory analysis supports the experimental findings, providing evidence for the effect of ligand substitution on the luminescence properties of homo/heteroleptic 2D CPs.

Molecular magnetism in nanodomains of isoreticular MIL-88(Fe)-MOFs

Molecular magnetism in nanodomains of three isoreticular MIL-88(Fe) analogues is studied and reported. Microstructures of isoreticular extended frameworks of MIL-88B, MIL-88C, and the interpenetrated analogue of MIL-88D, i.e., MIL-126, with the trigonal prismatic 6-c acs net are synthesized by linking Fe₃O inorganic cluster units with organic carboxylate linkers - benzene-1,4-dicarboxylic acid (BDC), 2,6-naphthalene dicarboxylic acid (NDC), and biphenyl-4,4'-dicarboxylic acid (BPDC), using a controlled solvent driven self-assembly process followed by a solvothermal method. The powder XRD traces are matched with the simulated diffraction patterns generated from their corresponding crystal structures, revealing the hexagonal symmetry for MIL-88B and MIL-88C, and the tetragonal symmetry for MIL-126. The elemental composition analysis confirms the empirical formula to be Fe₃O(L)₃ where L is the organic linker, supporting the formation of isoreticular MIL-88(Fe)-MOFs with MIL-88 topology. The morphologies of microstructures analyzed by SEM and TEM exhibit long spindle shaped rods with a core and a shell-like architecture for MIL-88B and MIL-88 C whereas MIL-126 shows cubic-shaped microstructures. The M-T plots confirm their blocking temperatures, T_B, to be 60 K, 50 K, and 40 K for MIL-88B, MIL-88C, and MIL-126, respectively. The M-H plots reveal their magnetic response to be ferromagnetic at 10 K with the coercivities, H_C, ranging from 250 G to 180 G. The gradual decrease in the T_B and H_C correlates with the nanocrystals' domain size, which decreases from MIL-88B to MIL-88C to MIL-126. Their phase transition from the ferromagnetic state to the short range ordering of the superparamagnetic state is observed in the temperature range of 100 K to 300 K. At T > T_B, nanocrystals of all three MIL-88 microstructures act as a single-magnetic domain, owing to their shape anisotropy and finite-dimensionality. The electron density distribution and the spin density state modeled for each MIL-88 analogue exhibit localized electron density and spin density on Fe₃O clusters, indicating the short range magnetic moment ordering in triangular metal oxide nodes with no extended magnetic cooperativity from their organic linkers. The short-range ordering of superparamagnetism in MIL-88(Fe)-MOFs suggests their further study as porous molecular-based magnets.

Conductive Metal-Organic Frameworks: Electronic Structure and Electrochemical Applications

Smarter and minimization of devices are consistently substantial to shape the energy landscape. Significant amounts of endeavours have come forward as promising steps to surmount this formidable challenge. It is undeniable that material scientists were contemplating smarter material beyond purely inorganic or organic materials. To our delight, metal-organic frameworks (MOFs), an inorganic-organic hybrid scaffold with unprecedented tunability and smart functionalities, have recently started their journey as an alternative. In this review, we focus on such propitious potential of MOFs that was untapped over a long time. We cover the synthetic strategies and (or) post-synthetic modifications towards the formation of conductive MOFs and their underlying concepts of charge transfer with structural aspects. We addressed theoretical calculations with the experimental outcomes and spectroelectrochemistry, which will trigger vigorous impetus about intrinsic electronic behaviour of the conductive frameworks. Finally, we discussed electrocatalysts and energy storage devices stemming from conductive MOFs to meet energy demand in the near future.

1,2,5-Thiadiazole 1,1-dioxides and Their Radical Anions: Structure, Properties, Reactivity, and Potential Use in the Construction of Functional Molecular Materials

This work provides a summary of the preparation, structure, reactivity, physicochemical properties, and main uses of 1,2,5-thiadiazole 1,1-dioxides in chemistry and material sciences. An overview of all currently known structures containing the 1,2,5-thiadiazole 1,1-dioxide motif (including the anions radical species) is provided according to the Cambridge Structural Database search. The analysis of the bond lengths typical for neutral and anion radical species is performed, providing a useful tool for unambiguous assessment of the valence state of the dioxothiadiazole-based compounds based solely on the structural data. Theoretical methodologies used in the literature to describe the dioxothiadiazoles are also shortly discussed, together with the typical 'fingerprint' of the dioxothiadiazole ring reported by means of various spectroscopic techniques (NMR, IR, UV-Vis). The second part describes the synthetic strategies leading to 1,2,5-thiadiazole 1,1-dioxides followed by the discussion of their electrochemistry and reactivity including mainly the chemical methods for the successful reduction of dioxothiadiazoles to their anion radical forms and the ability to form coordination compounds. Finally, the magnetic properties of dioxothiadiazole radical anions and the metal complexes involving dioxothiadiazoles as ligands are discussed, including simple alkali metal salts and d-block coordination compounds. The last section is a prospect of other uses of dioxothiadiazole-containing molecules reported in the literature followed by the perspectives and possible future research directions involving these compounds.

Redox Activity as a Powerful Strategy to Tune Magnetic and/or Conducting Properties in Benzoquinone-Based Metal-Organic Frameworks

Multifunctional molecular materials have attracted material scientists for several years as they are promising materials for the future generation of electronic devices. Careful selection of their molecular building blocks allows for the combination and/or even interplay of different physical properties in the same crystal lattice. Incorporation of redox activity in these networks is one of the most appealing and recent synthetic strategies used to enhance magnetic and/or conducting and/or optical properties. Quinone derivatives are excellent redox-active linkers, widely used for various applications such as electrode materials, flow batteries, pseudo-capacitors, etc. Quinones undergo a reversible two-electron redox reaction to form hydroquinone dianions via intermediate semiquinone radical formation. Moreover, the possibility to functionalize the six-membered ring of the quinone by various substituents/functional groups make them excellent molecular building blocks for the construction of multifunctional tunable metal-organic frameworks (MOFs). An overview of the recent advances on benzoquinone-based MOFs, with a particular focus on key examples where magnetic and/or conducting properties are tuned/switched, even simultaneously, by playing with redox activity, is herein envisioned.

Large breathing effect induced by water sorption in a remarkably stable nonporous cyanide-bridged coordination polymer

While metal-organic frameworks (MOFs) are at the forefront of cutting-edge porous materials, extraordinary sorption properties can also be observed in Prussian Blue Analogs (PBAs) and related materials comprising extremely short bridging ligands. Herein, we present a bimetallic nonporous cyanide-bridged coordination polymer (CP) {[Mn(imH)]2[Mo(CN)8]} n (1Mn; imH = imidazole) that can efficiently and reversibly capture and release water molecules over tens of cycles without any fatigue despite being based on one of the shortest bridging ligands known - the cyanide. The sorption performance of {[Mn(imH)]2[Mo(CN)8]} n matches or even outperforms MOFs that are typically selected for water harvesting applications with perfect sorption reversibility and very low desorption temperatures. Water sorption in 1Mn is possible due to the breathing effect (accompanied by a dramatic cyanide-framework transformation) occurring in three well-defined steps between four different crystal phases studied structurally by X-ray diffraction structural analysis. Moreover, the capture of H2O by 1Mn switches the EPR signal intensity of the MnII centres, which has been demonstrated by in situ EPR measurements and enables monitoring of the hydration level of 1Mn by EPR. The sorption of water in 1Mn controls also its photomagnetic behavior at the cryogenic regime, thanks to the presence of the [MoIV(CN)8]4- photomagnetic chromophore in the structure. These observations demonstrate the extraordinary sorption potential of cyanide-bridged CPs and the possibility to merge it with the unique physical properties of this class of compounds arising from their bimetallic character (e.g. photomagnetism and long-range magnetic ordering).

Magnetic Phase Switching Performance in an Fe-Tetraoxolene-Layered Metal-Organic Framework via Electrochemical Cycling

The iron-based tetraoxolene honeycomb-layered compound (NPr₄)₂[Fe₂(Cl₂An)₃] (1; NPr₄⁺ = tetrapropylammonium cation; Cl₂An^2- = 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinonate) was used as the cathode material for lithium-ion batteries. We observed a charge-cycling performance (∼16 times) with three electrons/Li⁺ ion insertion and extraction, corresponding to the stoichiometry redox of Cl₂An^2- + e^- ↔ Cl₂An^·3- and Fe³⁺ + e^- ↔ Fe²⁺. The generation/annihilation of radicals, Cl₂An^·3-, enables the significant improvement/deterioration of the magnetic phase transition temperature with T_c = 100 K.

Influence of Fine Ligand Substitution Modification of the Isocyanidometal Bridge on Metal-to-Metal Charge Transfer Properties in Class II-III Mixed Valence Complexes

The synthesis and characterization of Class II-III mixed valence complexes have been an interesting topic due to their special intermediate behaviour between localized and delocalized mixed valence complexes. To investigate the influence of the isocyanidometal bridge on metal-to-metal charge transfer (MMCT) properties, a family of new isocyanidometal-bridged complexes and their one-electron oxidation products cis-[Cp(dppe)Fe-CN-Ru(L)₂ -NC-Fe(dppe)Cp][PF₆ ]_n (n=2, 3) (Cp=1,3-cyclopentadiene, dppe=1,2-bis(diphenylphosphino)ethane, L=2,2'-bipyridine (bpy, 1[PF₆ ]_n ), 5,5'-dimethyl-2,2'-bipyridyl (5,5'-dmbpy, 2[PF₆ ]_n ) and 4,4'-dimethyl-2,2'-bipyridyl (4,4'-dmbpy, 3[PF₆ ]_n )) have been synthesized and fully characterized. The experimental results suggest that all the one-electron oxidation products may belong to Class II-III mixed valence complexes, supported by TDDFT calculations. With the change of the substituents of the bipyridyl ligand on the Ru centre from H, 5,5'-dimethyl to 4,4'-dimethyl, the energy of MMCT for the one-electron oxidation complexes changes in the order: 1³⁺ <2³⁺ <3³⁺ , and that for the two-electron oxidation complexes decreases in the order 1⁴⁺ >3⁴⁺ >2⁴⁺ . The potential splitting (ΔE_1/2 (2)) between the two terminal Fe centres for N[PF₆ ]₂ are the largest potential splitting for the cyanido-bridged complexes reported so far. This work shows that the smaller potential difference between the bridging and the terminal metal centres would result in the more delocalized mixed valence complex.

Magnesium and Nickel Complexes with Bis(p-iminoquinone) Redox-Active Ligand

Abstract

Poorly soluble in the most part of organic solvents dimeric complexes $${\text{M}}{{{\text{g}}}_{{\text{2}}}}{\text{L}}_{2}^{2}$$·4DMF (I) and $${\text{N}}{{{\text{i}}}_{{\text{2}}}}{\text{L}}_{2}^{2}$$·4DMF (II) (L is 4,4'-(1,4-phenylenebis(azanylylidene))bis(3,6-di-tert-butyl-2-hydroxycyclohexa-2,5-dien-1-one dianion)) are synthesized by the reactions of magnesium and nickel acetates with the ditopic redox-active ligand of the hydroxy-para-iminoquinone type in a DMF solution. The molecular and crystal structures of the synthesized compounds are determined by X-ray diffraction analysis (CIF files CCDC nos. 2045665 (I) and 2045666 (II·3DMF)). The thermal stability is studied by thermogravimetry. The redox-active character of the organic bridging ligand in the dimeric complexes $${\text{M}}{{{\text{g}}}_{{\text{2}}}}{\text{L}}_{2}^{2}$$·4DMF and $${\text{N}}{{{\text{i}}}_{{\text{2}}}}{\text{L}}_{2}^{2}$$·4DMF is confirmed by the data of solid-phase electrochemistry.

Magnet Creation by Guest Insertion into a Paramagnetic Charge-Flexible Layered Metal-Organic Framework

Changing nonmagnetic materials to spontaneous magnets is an alchemy-inspiring concept in materials science; however, it is not impossible. Here, we demonstrate chemical modification from a nonmagnet to a bulk magnet of either a ferrimagnet or antiferromagnet, depending on the adsorbed guest molecule, in an electronic-state-flexible layered metal-organic framework, [{Ru₂(2,4-F₂PhCO₂)₄}₂TCNQ(EtO)₂] (1; 2,4-F₂PhCO₂^- = 2,4-difluorobenzoate; TCNQ(EtO)₂ = 2,5-diethoxy-7,7,8,8-tetracyanoquinodimethane). The guest-free paramagnet 1 undergoes a thermally driven intralattice electron transfer involving a structural transition at 380 K. This charge modification can also be implemented by guest accommodations at room temperature; 1 adsorbs several organic molecules, such as benzene (PhH), p-xylene (PX), 1,2-dichloroethane (DCE), dichloromethane (DCM), and carbon disulfide (CS₂), forming 1-solv with intact crystallinity. This induces an intralattice electron transfer to produce a ferrimagnetically ordered magnetic layer. According to the interlayer environment tuned by the corresponding guest molecule, the magnetic phase is consequently altered to a ferrimagnet for the guests PhH, PX, DCE, and DCM or an antiferromagnet for CS₂. This is the first demonstration of the postsynthesis of bulk magnets using guest-molecule accommodations.

Tuning metal to metal charge transfer properties in cyanidometal-bridged complexes by changing the auxiliary ligand on the bridge

In order to investigate the influence of the auxiliary ligand of the cyanidometal bridge on metal to metal charge transfer (MMCT) in cyanidometal-bridged complexes, two groups of heterotrimetallic cyanidometal-bridged complexes, trans-[Cp*(dppe)Fe-NC-Ru(L)2-CN-Fe(dppe)Cp*][PF6]n (L = bpy, 1(PF6)n; L = 4,4'-dmbpy, 2(PF6)n; n = 2, 3, 4) (Cp* = 1,2,3,4,5-pentamethylcyclopentadiene, dppe = 1,2-bis(diphenylphosphino)ethane, bpy = 2,2'-bipyridine, 4,4'-dmbpy = 4,4'-dimethyl-2,2'-bipyridyl) were synthesized and fully characterized. The MMCT of the one-electron oxidation mixed valence complexes is mainly attributed to RuII and FeII → FeIII MMCT transitions, and the MMCT of the two-electron oxidation complexes is mainly attributed to RuII → FeIII MMCT transitions. The energy of the MMCT of the four complexes decreases with the increase of the electron donating ability of the auxiliary ligand of the cyanidometal bridge. The IR, EPR, and Mössbauer spectra, and the solvent independence of MMCT characterizations indicate that the one-electron oxidation mixed valence complexes may belong to Class II-III systems, and the two-electron oxidation complexes may be localized at low temperature but delocalized at room temperature on the EPR timescale.

Metal–Organic Frameworks as Versatile Platforms for Organometallic Chemistry

Metal–organic frameworks (MOFs) are emerging porous materials with highly tunable structures developed in the 1990s, while organometallic chemistry is of fundamental importance for catalytic transformation in the academic and industrial world for many decades. Through the years, organometallic chemistry has been incorporated into functional MOF construction for diverse applications. Here, we will focus on how organometallic chemistry is applied in MOF design and modifications from linker-centric and metal-cluster-centric perspectives, respectively. Through structural design, MOFs can function as a tailorable platform for traditional organometallic transformations, including reaction of alkenes, cross-coupling reactions, and C–H activations. Besides, an overview will be made on other application categories of organometallic MOFs, such as gas adsorption, magnetism, quantum computing, and therapeutics.

An Open-shell, Luminescent, Two-Dimensional Coordination Polymer with a Honeycomb Lattice and Triangular Organic Radical

The use of organic radicals as building blocks is an effective approach to the production of open-shell coordination polymers (CPs). Two-dimensional (2D) CPs with honeycomb spin-lattices have attracted attention because of the unique electronic structures and physical properties afforded by their structural topology. However, radical-based CPs with honeycomb spin-lattices tend to have low chemical stability or poor crystallinity, and thus novel systems with high crystallinity and persistence are in strong demand. In this study, a novel triangular organic radical possessing three pyridyl groups, tris(3,5-dichloro-4-pyridyl)methyl radical (trisPyM) was prepared. It exhibits luminescence, high photostability, and a coordination ability, allowing formation of defined and persistent 2D CPs. Optical measurements confirmed the luminescence of trisPyM both in solution and in the solid state, with emission wavelengths, λ_em, of 665 and 700 nm, respectively. trisPyM exhibits better chemical stability under photoirradiation than other luminescent radicals: the half-life of trisPyM in CH₂Cl₂ was 10 000 times that of the tris(2,4,6-trichlorophenyl)methyl radical (TTM), a conventional luminescent radical. Complexation between trisPyM and Zn^II(hfac)₂ yielded a single crystal of a 2D CP trisZn, possessing a honeycomb lattice with graphene-like spin topology. The coordination structure of trisZn is stable under evacuation at 60 °C. Moreover, trisZn exhibits luminescence at 79 K, with λ_em = 695 nm, and is a rare example of a luminescent material among 2D radical-based CPs. Our results indicate that trisPyM may be a promising building block in the construction of a new class of 2D honeycomb CPs with novel properties, including luminescence.

Two-dimensional conjugated metal–organic frameworks (2D c-MOFs): chemistry and function for MOFtronics

Two-dimensional conjugated MOFs are emerging for multifunctional electronic devices that brings us “MOFtronics”, such as (opto)electronics, spintronics, energy devices.

Magnetic relaxation in two chain-like Zn2Dy2 Schiff base coordination polymers bridged by tetraoxolene and its one-electron reduced radical

Two chain-like Zn–Dy anilate radical coordination polymers with Schiff base ligands show magnetic relaxation behaviors.

Lanthanoid-Anilato Complexes and Lattices

In this review, we describe all the structurally characterized complexes containing lanthanoids (Ln, including La and group 3 metals: Y and Lu) and any anilato-type ligand (3,6-disubstituted-2,5-dihydroxy-1,4-benzoquinone dianion = C6O4X22−). We present all the anilato-Ln compounds including those where, besides the anilato-type ligand, there is one or more coligands or solvent molecules coordinated to the lanthanoid ions. We show the different structural types observed in these compounds: from discrete monomers, dimers and tetramers to extended 1D, 2D and 3D lattices with different topologies. We also revise the magnetic properties of these Ln-anilato compounds, including single-molecule magnet (SMM) and single-ion magnet (SIM) behaviours. Finally, we show the luminescent and electrochemical properties of some of them, their gas/solvent adsorption/absorption and exchange capacity and the attempts to prepare them as thin films.

Valence-Dependent Electrical Conductivity in a 3D Tetrahydroxyquinone-Based Metal-Organic Framework

Electrically conductive metal-organic frameworks (cMOFs) have become a topic of intense interest in recent years because of their great potential in electrochemical energy storage, electrocatalysis, and sensing applications. Most of the cMOFs reported hitherto are 2D structures, and 3D cMOFs remain rare. Herein we report FeTHQ, a 3D cMOF synthesized from tetrahydroxy-1,4-quinone (THQ) and iron(II) sulfate salt. FeTHQ exhibited a conductivity of 3.3 ± 0.55 mS cm^-1 at 300 K, which is high for 3D cMOFs. The conductivity of FeTHQ is valence-dependent. A higher conductivity was measured with the as-prepared FeTHQ than with the air-oxidized and sodium naphthalenide-reduced samples.

Cerium-quinone redox couples put under scrutiny

Homoleptic cerous complexes Ce[N(SiMe₃)₂]₃, [Ce{OSi(OtBu)₃}₃]₂ and [Ce{OSiⁱPr₃}₃]₂ were employed as thermally robust, weakly nucleophilic precursors to assess their reactivity towards 1,4-quinones in non-aqueous solution. The strongly oxidizing quinones 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) or tetrachloro-1,4-benzoquinone (Cl₄BQ) readily form hydroquinolato-bridged ceric complexes of the composition [(Ce^IVL₃)₂(μ₂-O₂C₆R₄)]. Less oxidising quinones like 2,5-di-tert-butyl-1,4-benzoquinone (tBu₂BQ) tend to engage in redox equilibria with the ceric hydroquinolato-bridged form being stable only in the solid state. Even less oxidising quinones such as tetramethyl-1,4-benzoquinone (Me₄BQ) afford cerous semiquinolates of the type [(Ce^IIIL₂(thf)₂)(μ₂-O₂C₆Me₄)]₂. All complexes were characterised by X-ray diffraction, ¹H, ¹³C{¹H} and ²⁹Si NMR spectroscopy, DRIFT spectroscopy, UV-Vis spectroscopy and CV measurements. The species putatively formed during the electrochemical reduction of [Ce^IV{N(SiMe₃)₂}₃]₂(μ₂-O₂C₆H₄) could be mimicked by chemical reduction with Co^IICp₂ yielding [(Ce^III{N(SiMe₃)₂}₃)₂(μ₂-O₂C₆H₄)][Co^IIICp₂]₂.