The Nature of Secondary Interactions at Electrophilic Metal Sites of Molecular and Silica-Supported Organolutetium Complexes from Solid-State NMR Spectroscopy

Geometry and electronic structure of Yb(III)[CH(SiMe3)2]3 from EPR and solid-state NMR augmented by computations

Characterization of paramagnetic compounds, in particular regarding the detailed conformation and electronic structure, remains a challenge, and - still today it often relies solely on the use of X-ray crystallography, thus limiting the access to electronic structure information. This is particularly true for lanthanide elements that are often associated with peculiar structural and electronic features in relation to their partially filled f-shell. Here, we develop a methodology based on the combined use of state-of-the-art magnetic resonance spectroscopies (EPR and solid-state NMR) and computational approaches as well as magnetic susceptibility measurements to determine the electronic structure and geometry of a paramagnetic Yb(III) alkyl complex, Yb(III)[CH(SiMe3)2]3, a prototypical example, which contains notable structural features according to X-ray crystallography. Each of these techniques revealed specific information about the geometry and electronic structure of the complex. Taken together, both EPR and NMR, augmented by quantum chemical calculations, provide a detailed and complementary understanding of such paramagnetic compounds. In particular, the EPR and NMR signatures point to the presence of three-centre-two-electron Yb-γ-Me-β-Si secondary metal-ligand interactions in this otherwise tri-coordinate metal complex, similarly to its diamagnetic Lu analogues. The electronic structure of Yb(III) can be described as a single 4f13 configuration, while an unusually large crystal-field splitting results in a thermally isolated ground Kramers doublet. Furthermore, the computational data indicate that the Yb-carbon bond contains some π-character, reminiscent of the so-called α-H agostic interaction.

Active Sites in Cr(III)-Based Ethylene Polymerization Catalysts from Machine-Learning-Supported XAS and EPR Spectroscopy

The ethylene polymerization Phillips catalyst has been employed for decades and is central to the polymer industry. While Cr(III) alkyl species are proposed to be the propagating sites, there is so far no direct experimental evidence for such proposal. In this work, by coupling Surface organometallic chemistry, EPR spectroscopy, and machine learning-supported XAS studies, we have studied the electronic structure of well-defined silica-supported Cr(III) alkyls and identified the presence of several surface species in high and low-spin states, associated with different coordination environments. Notably, low-spin Cr(III) sites are shown to participate in ethylene polymerization, indicating that similar Cr(III) alkyl species could be involved in the related Phillips catalyst.

The coordination chemistry of oxide and nanocarbon materials

Understanding how a ligand affects the steric and electronic properties of a metal is the cornerstone of the inorganic chemistry enterprise. What happens when the ligand is an extended surface? This question is central to the design and implementation of state-of-the-art functional materials containing transition metals. This perspective will describe how these two very different sets of extended surfaces can form well-defined coordination complexes with metals. In the Green formalism, functionalities on oxide surfaces react with inorganics to form species that contain X-type or LX-type interactions between the metal and the oxide. Carbon surfaces are neutral L-type ligands; this perspective focuses on carbons that donate six electrons to a metal. The nature of this interaction depends on the curvature, and thereby orbital overlap, between the metal and the extended π-system from the nanocarbon.

Rare Earth Starting Materials and Methodologies for Synthetic Chemistry

The number of rare earth (RE) starting materials used in synthesis is staggering, ranging from simple binary metal-halide salts to borohydrides and "designer reagents" such as alkyl and organoaluminate complexes. This review collates the most important starting materials used in RE synthetic chemistry, including essential information on their preparations and uses in modern synthetic methodologies. The review is divided by starting material category and supporting ligands (i.e., metals as synthetic precursors, halides, borohydrides, nitrogen donors, oxygen donors, triflates, and organometallic reagents), and in each section relevant synthetic methodologies and applications are discussed.

Yttrium tris(trimethylsilylmethyl) complexes grafted onto MCM-48 mesoporous silica nanoparticles

A series of tris(trimethylsilylmethyl) yttrium donor adduct complexes was synthesized and fully characterized by X-ray diffraction, ¹H/¹³C/²⁹Si/³¹P/⁸⁹Y heteronuclear NMR and FTIR spectroscopies as well as elemental analyses. Treatment of Y(CH₂SiMe₃)₃(thf)_x with various donors Do led to complete (Do = TMEDA, DMAP) and partial displacement of THF (Do = NHC^iPr, DMPE). Exceptionally large ⁸⁹Y NMR shifts to low field were observed for the new complexes. Complexes Y(CH₂SiMe₃)₃(tmeda) and Y(CH₂SiMe₃)₃(dmpe)(thf) were chosen to perform surface organometallic chemistry, due to a comparatively higher thermal stability and the availability of the ³¹P nucleus as a spectroscopic probe, respectively. Mesoporous nanoparticles of the MCM-48-type were synthesized and used as a 3^rd generation silica support. The parent and hybrid materials were characterized using X-ray powder diffraction, solid-state-NMR spectroscopy, DRIFTS, elemental analyses, N₂-physisorption, and scanning electron microscopy (SEM). The presence of surface-bound yttrium alkyl moieties was further proven by the reaction with carbon dioxide. Quantification of the surface silanol population by means of HN(SiHMe₂)₂-promoted surface silylation is shown to be superior to titration with lithium alkyl LiCH₂SiMe₃.

Solid-state NMR studies of non-ionic surfactants confined in mesoporous silica

This review gives an overview of current trends in the investigation of confined molecules such as higher alcohols, ethylene glycol and polyethylene glycol as guest molecules in neat and functionalized mesoporous silica materials. All these molecules have both hydrophobic and hydrophilic parts. They are characteristic role-models for the investigation of confined surfactants. Their properties are studied by a combination of solid-state NMR and relaxometry with other physicochemical techniques and molecular dynamics techniques. It is shown that this combination delivers unique insights into the structure, arrangement, dynamical properties and the guest-host interactions inside the confinement.

Yttrium and lanthanum bis(phosphine-oxide)methanides: structurally diverse, dynamic, and reactive

Homoleptic yttrium and lanthanum complexes of bis(phosphineoxide) methanides, RE(HPhL)3 and RE2(HMeL)6, promote the first rare-earth mediated Horner-Wittig and acid-base chemistry consistent with multifunctional reactivity (Lewis-acid/Brønstedbase).

Enantiomerically Pure Constrained Geometry Complexes of the Rare-Earth Metals Featuring a Dianionic N-Donor Functionalised Pentadienyl Ligand: Synthesis and Characterisation

We report the preparation of enantiomerically pure constrained geometry complexes (cgc) of the rare-earth metals bearing a pentadienyl moiety (pdl) derived from the natural product (1R)-(-)-myrtenal. The potassium salt 1, [Kpdl*], was treated with ClSiMe₂ NHtBu, and the resulting pentadiene 2 was deprotonated with the Schlosser-type base KOtPen/nBuLi (tPen=CMe₂ (CH₂ Me)) to yield the dipotassium salt [K₂ (pdl*SiMe₂ NtBu)] (3). However, 3 rearranges in THF solution to its isomer 3' by a 1,3-H shift, which elongates the bridge between the pdl and SiMe₂ NtBu moieties by one CH₂ unit. This is crucial for the successful formation of various monomeric C₁ - or dimeric C₂ -symmetric rare-earth cgc complexes with additional halide, tetraborohydride, amido and alkyl functionalities. All compounds have been extensively characterised by solid-state X-ray diffraction analysis, solution NMR spectroscopy and elemental analyses.

Small Molecules, Non-Covalent Interactions, and Confinement

This review gives an overview of current trends in the investigation of small guest molecules, confined in neat and functionalized mesoporous silica materials by a combination of solid-state NMR and relaxometry with other physico-chemical techniques. The reported guest molecules are water, small alcohols, and carbonic acids, small aromatic and heteroaromatic molecules, ionic liquids, and surfactants. They are taken as characteristic role-models, which are representatives for the typical classes of organic molecules. It is shown that this combination delivers unique insights into the structure, arrangement, dynamics, guest-host interactions, and the binding sites in these confined systems, and is probably the most powerful analytical technique to probe these systems.

Scandium bis(trimethylsilyl)methyl complexes revisited: extending the 45Sc NMR chemical shift range and a new structural motif of Li[CH(SiMe3)2]

Depending on the molar ratio employed, the reaction of ScCl₃(thf)₃ with Li[CH(SiMe₃)₂] afforded the bis and tris(alkyl) ate complexes [Sc{CH(SiMe₃)₂}₂(μ-Cl)₂Li(thf)₂]₂ and Sc[CH(SiMe₃)₂]₃(μ-Cl)Li(thf)₃, respectively, in moderate yields. Treatment of these mixed alkyl/chlorido complexes with MeLi gave the mixed alkyl complexes [Sc{CH(SiMe₃)₂}₂(μ-Me)₂Li(thf)₂]₂ and Sc[CH(SiMe₃)₂]₃(μ-Me)Li(thf)₃. Aiming at homoleptic {Sc[CH(SiMe₃)₂]₃} both of the mixed [CH(SiMe₃)₂]/Me complexes were treated with AlMe₃. Although LiAlMe₄ separation occurred, aluminium complex Al[CH(SiMe₃)₂]Me₂(thf) was the only isolable crystalline complex. Ate complexes [Sc{CH(SiMe₃)₂}₂(μ-Me)₂Li(thf)₂]₂ and [Sc(CH₂SiMe₃)₄][Li(thf)₄] revealed the maximum downfield ⁴⁵Sc NMR chemical shifts of 888.0 and 933.4 ppm, respectively, reported to date. The synthesis of putative {Sc[CH(SiMe₃)₂]₃} was also attempted via the aryloxide route applying complexes Sc(OC₆H₂tBu₂-2,6-Me-4)₃ and [Sc(OC₆H₃iPr₂-2,6)₃]₂ along with Li[CH(SiMe₃)₂] but the outcome was inconclusive. Instead, a cyclic octamer was found for Li[CH(SiMe₃)₂] in the solid state.

Efficient alkene hydrosilation with bis(8-quinolyl)phosphine (NPN) nickel catalysts. The dominant role of silyl-over hydrido-nickel catalytic intermediates

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with a variety of hydrosilanes under mild conditions and low catalyst loadings. DFT studies reveal the presence of two coupled catalytic cycles based on [(NPN)NiH]⁺ and [(NPN)NiSiR₃]⁺ active species, with the latter being more efficient for producing the product. The preferred silyl-based catalysis is not due to a more facile insertion of alkene into the Ni–Si (vs. Ni–H) bond, but by consistent and efficient conversions of the hydride to the silyl complex.

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with hydrosilanes under mild conditions and low catalyst loadings.

Highly selective redistribution of primary arylsilanes to secondary arylsilanes catalyzed by Ln(CH2C6H4NMe2-o)3@SBA-15

The organometallic–inorganic hybrid materials Ln(CH₂C₆H₄NMe₂-o)₃@SBA-15 (Ln = La, Y) were prepared, which demonstrated extremely high selectivity (>99%) in catalyzing the redistribution of primary arylsilanes to secondary arylsilanes.

Rare earth arylsilazido compounds with inequivalent secondary interactions

A new bulky silazido ligand, -N(SiHMe2)Dipp (Dipp = C6H3-2,6-iPr2), supports planar, three-coordinate homoleptic rare earth complexes Ln{N(SiHMe2)Dipp}3 (Ln = Sc, Y, and Lu), each containing three secondary Ln↼HSi interactions and one agostic CH bond. Y{N(SiHMe2)Dipp}3 and acetophenone react via hydrosilylation, rather than by insertion into the Y-N bond or by enolate formation.

Homoleptic Trivalent Tris(alkyl) Rare Earth Compounds

Homoleptic tris(alkyl) rare earth complexes Ln{C(SiHMe₂)₃}₃ (Ln = La, 1a; Ce, 1b; Pr, 1c; Nd, 1d) are synthesized in high yield from LnI₃THF_n and 3 equiv of KC(SiHMe₂)₃. X-ray diffraction studies reveal 1a-d are isostructural, pseudo-C₃-symmetric molecules that contain two secondary Ln↼HSi interactions per alkyl ligand (six total). Spectroscopic assignments are supported by comparison with Ln{C(SiDMe₂)₃}₃ and DFT calculations. The Ln↼HSi and terminal SiH exchange rapidly on the NMR time scale at room temperature, but the two motifs are resolved at low temperature. Variable-temperature NMR studies provide activation parameters for the exchange process in 1a (ΔH^⧧ = 8.2(4) kcal·mol^-1; ΔS^⧧ = -1(2) cal·mol^-1K^-1) and 1a-d₉ (ΔH^⧧ = 7.7(3) kcal·mol^-1; ΔS^⧧ = -4(2) cal·mol^-1K^-1). Comparisons of lineshapes, rate constants (k_H/k_D), and slopes of ln(k/T) vs 1/T plots for 1a and 1a-d₉ reveal that an inverse isotope effect dominates at low temperature. DFT calculations identify four low-energy intermediates containing five β-Si-H⇀Ln and one γ-C-H⇀Ln. The calculations also suggest the pathway for Ln↼HSi/SiH exchange involves rotation of a single C(SiHMe₂)₃ ligand that is coordinated to the Ln center through the Ln-C bond and one secondary interaction. These robust organometallic compounds persist in solution and in the solid state up to 80 °C, providing potential for their use in a range of synthetic applications. For example, reactions of Ln{C(SiHMe₂)₃}₃ and ancillary proligands, such as bis-1,1-(4,4-dimethyl-2-oxazolinyl)ethane (HMeC(Ox^Me2)₂) give {MeC(Ox^Me2)₂}Ln{C(SiHMe₂)₃}₂, and reactions with disilazanes provide solvent-free lanthanoid tris(disilazides).

Homoleptic organolanthanide compounds supported by the bis(dimethylsilyl)benzyl ligand

A β-SiH functionalized benzyl anion [C(SiHMe₂)₂Ph]⁻ reacts with early rare earth halides to provide homoleptic tris(alkyl)lanthanides containing secondary interactions in an efficient and high yielding route.