Near-Infrared Electrogenerated Chemiluminescence from Aqueous Soluble Lipoic Acid Au Nanoclusters

Hydrogen peroxide regulated split-type electrochemiluminescence sensing platform for non-invasive detection of gastric cancer-associated D-amino acids

Monitoring D-amino acids concentrations has essential implications for gastric cancer diagnosis and treatment, especially in the non-invasive detection of gastric cancer. However, it remains a challenge to establish a high-performance detection method for D-amino acids. Here, a highly sensitive and selective d-alanine (D-Ala) ECL assay strategy via a turn-off-on split-type electrochemiluminescence (ECL) platform has been proposed. We found that hydrogen peroxide (H2O2) could be used as an efficient etching agent to turn on the MnO2/gold nanocluster (AuNC)-based ECL nanoswitch platform. Based on abovementioned characteristics, we extended it to the D-amino acids assay since the enzymatic reaction between D-Ala and D-amino acid oxidase (DAAO) generates H2O2. Based on the abovementioned characteristics, this ECL sensing platform achieved a preferable linear-dependent curve in the detection range of 1.0 × 10 -10∼1.0 × 10-3 mol L-1, and realized the detection of D-Ala as low as 2.2 × 10-11 mol L-1 (S/N = 3). Furthermore, the proposed ECL biosensor showed excellent selectivity, stability, and reproducibility. Together with its powerful performance, this strategy could test D-Ala in saliva samples, which suggested that this ECL assay platform shows great prospect in disease diagnosis. We ascribe the high sensitivity and good anti-interference capability of the sensor to the combination of specific enzyme catalysis reaction, high-efficiency split-type AuNC probe-based ECL technique and the highly etching efficiency of H2O2 to MnO2 nanomaterials on electrode surface. In our perception, this H2O2 mediated split-type ECL sensing platform provides a viable tool in ECL based bioananlysis. Therefore, our proposed approach not only provides a strategy for developing a high-performance platform for D-Ala detection, but also establishes a framework for the detailed design and development of ECL platform for other biological assays.

Water-compatible electrogenerated chemiluminescence effect derived from readily accessible tripyridinium salts

Considering that numerous studies have shown pyridinium salts can be reduced electrochemically to form cationic radicals, we wonder whether these cationic radicals can further react with co-reactants to create excited-state species that display electrogenerated chemiluminescence (ECL). Herein, four tripyridinium salts were synthesized using a simple method, achieving relatively high yields of over 87%. Optical and electrochemical analyses revealed that these tripyridinium salts, which feature a large conjugated system, demonstrated notable electrochemical and photoluminescent properties. Most importantly, when paired with potassium persulfate as a co-reactant, distinct ECL behavior was observed even in water, with emissions detected at around 478 nm. The maximum ECL efficiency (ΦECL) of the synthesized salts, using Ru(bpy)32+ as a reference, was found to be 10.2%. Furthermore, we conducted a detailed investigation into the luminous mechanism behind ECL generation from the tripyridinium salts.

Modular Engineering of the DNAzyme-Based Electrochemiluminescence Biosensor with the Nitrogen and Sulfur Codoped Carbon Dots as Near-Infrared Emitters for MicroRNA detection

DNAzyme-based biosensors remain at the forefront of microRNA (miRNA) analysis efforts. In this work, an electrochemiluminescence (ECL) biosensor technology integrating miRNA-initiated DNAzyme with a near-infrared ECL emission system was designed to detect miRNA. The DNAzyme was designed through the rational reconstitution of Mg2+-specific 8-17 DNAzyme. We engineered the DNAzyme strand with incorporation of a blocker strand to inhibit the DNAzyme activity. The blocker strand formed a duplex structure that prohibited the hybridization of the DNAzyme strand with the one arm of the substrate strand, leading to the formation of an inactive DNAzyme structure. In the presence of target miRNA, the hybridization between the target miRNA and the blocker strand would induce the breakage of the duplex, followed by the formation of the active DNAzyme. Thus, the activity of the DNAzyme biosensors could be switched from the OFF state into the ON state. Moreover, the nitrogen and sulfur codoped near-infrared emission carbon dots (NIR NS-CDs) were used as neoteric ECL emitters, which not only possessed an NIR ECL emission to reduce the photochemical damage but also had a low excitation potential range to avoid the side reaction. Therefore, by combining the DNAzyme modular engineering strategy and NIR NS-CDs as neoteric ECL emitters, the constructed ECL biosensor could realize the ultrasensitive analysis of miRNA-155 with an identification limit of 58.5 aM. This DNAzyme-guided NIR ECL emission of the neoteric CD strategy provides a sensitive and reliable method for miRNA detection, and it has great potential in clinical diagnosis.

Computational and Experimental Elucidation of the Charge-Dependent Acid-Etching Dynamics and Electrocatalytic Performance of Au25(SR)18 q(q = -1, 0, +1) Nanoclusters

Using thiolate-protected Au25(SR)18 nanocluster (NC) with different charge states as the test candidate, how the charge effect affects the etching dynamics of thiolate ligands in acid and the electrocatalytic performance is explored. The ab initio molecular dynamics (AIMD) simulations revealed the charge-dependent reaction kinetics in acid, where the anionic and neutral Au25(SCH3)18 q (q = -1, 0) favorably react with the acid and partially remove the thiolate ligands via two-step proton attack, while the cationic Au25(SCH3)18 + NC is acid-resistant with no tendency for -SR removal. Density functional theory (DFT) calculations further predict that the dethiolated Au sites exhibit enhanced catalytic activity for CO2 electroreduction to CO, with the anionic Au25 - showing significantly superior activity. Acid etching and electrocatalytic experiments further confirmed partial removal of thiolate ligands in Au25(SCH3)18 q (q = -1, 0), with dethiolated Au25 NCs showing enhanced catalytic performance in CO2 electroreduction, particularly Au25 - exhibiting better activity than Au25 0. This work revealed an interesting charge state-mediated interface dynamics and electrocatalytic behaviors in Au25 NCs, which can be applied to modulate the interface and catalytic properties of other atomically precise metal nanoclusters.

Multiple-Signal Amplification Strategy to Fabricate an Ultrasensitive Electrochemiluminescence Magnetic Immunosensor for Detecting Biomarkers of Alzheimer's Disease via Iridium-Based Self-Enhancing Nanoemitters

Alzheimer's disease (AD) is characterized by progressive memory loss and cognitive decline, significantly impairing the daily life of elderly individuals. The low abundance of blood-based biomarkers in AD necessitates higher analytical technique requirements. Herein, one novel iridium-based ECL self-enhanced nanoemitter (TPrA@Ir-SiO2) was unprecedentedly reported, and it was further used to construct an ultrasensitive ECL magnetic immunosensor by a multiple-signal amplification strategy to unequally sensitively and accurately detect the AD blood-based biomarker (P-tau181) in this work. The initial signal amplification was accomplished via incorporating a new efficient iridium-based luminophore named Ir(mdq)2(acac) and a corresponding coreactant into silica nanoparticles to successfully obtain TPrA@Ir-SiO2. In addition, the specific and high-affinity interactions between streptavidin and biotin were subsequently employed to further facilitate signal amplification. Based on the advantages of the luminophore itself and the high-affinity interactions between biotin and streptavidin, the corresponding ECL immunosensor proposed in this work exhibited remarkable sensitivity, covering a wide linear range from 0.1 pg/mL to 0.1 μg/mL, and achieved an ultralow limit of detection of 68.58 fg/mL (S/N = 3), and it also exhibited outstanding recovery (98-104%) and RSD (1.92-4.86%) in the detection of serum samples by the spiking method. These remarkable results undoubtedly demonstrate the potential of self-enhanced ECL nanoemitters combined with a synergistic signal amplification strategy bearing streptavidin-biotin in detecting AD blood-based biomarkers, providing accurate and reliable solutions for early diagnosis and monitoring of AD, which would open a new avenue to effectively reduce the burden on AD patients' families and society in the future.

Spatial Confinement-Enhanced Electrochemiluminescence of Gold Nanoclusters on 3D Porous ZrO2 Hollow Nanospheres for the Assessment of Acute Myocardial Infarction Protein Markers

Herein, the gold nanoclusters@three-dimensional (3D) porous ZrO2 hollow nanospheres (Au NCs@ZrO2) with spatial confinement-enhanced electrochemiluminescence (SCE-ECL) were first prepared to fabricate a biosensing platform for the ultrasensitive detection of insulin-like growth factor 1 (IGF-1), which was associated with cardiovascular disease, malignant tumor, and neuropathic pain. Specifically, the confinement of Au NCs in a 3D microenvironment significantly boosted the optical radiation of excited Au NCs because the vibration of ligand molecules was restricted, and the recombination of holes and electrons of excited Au NCs was facilitated in the optical process for enhancing ECL efficiency, resulting in 5.1-fold stronger ECL efficiency than Au NCs. As a proof of concept, based on Au NCs@ZrO2 as an emitter and an orderly and localized catalytic hairpin self-assembly (OL-CHA) system as a signal amplifier, the built ECL biosensing platform achieved fast and trace determination of IGF-1 with the detection limit (LOD) down to 0.36 fg/mL. Moreover, the ECL platform realized the assessment of the IGF-1 expression of acute myocardial infarction (AMI) patients and exhibited a more prominent accuracy than the enzyme-linked immunosorbent assay (ELISA). This work proposed a neoteric avenue for developing highly efficient ECL emitters, which presented a promising prospect in ultrasensitive bioanalysis for early diagnosis of diseases.

Recent advances and future prospects in oxidative-reduction low-triggering-potential electrochemiluminescence strategies based on nanoparticle luminophores

The oxidative-reduction electrochemiluminescence (ECL) potential of a luminophore is one of the most significant parameters during light generation processes when considering the growing demand for anti-interference analysis techniques, electrode compatibility and the reduction of damage to biological molecules due to excessive excitation potential. Nanoparticle luminophores, including quantum dots (QDs) and metal nanoclusters (NCs), possess tremendous potential for forming various ECL sensors due to their adjustable surface states. However, few reviews focused on nanoparticle luminophore-based ECL systems for low-triggering-potential (LTP) oxidative-reduction ECL to avoid the possible interference and oxidative damage of biological molecules. This review summarizes the recent advances in the LTP oxidative-reduction ECL potential strategy with nanoparticle luminophores as ECL emitters, including matching efficient coreactants and nanoparticle luminophores, doping nanoparticle luminophores, constructing donor-acceptor systems, choosing suitable working electrodes, combining multiplex nanoparticle luminophores, and employing surface-engineering strategies. In the context of the different LTP ECL systems, potential-lowering strategies and bio-related applications are discussed in detail. Additionally, the future trends and challenges of low ECL-triggering-potential strategies are discussed.

Expanding the Toolbox of Oxidants: Controllable Etching of Ultrasmall Au Nanoparticles toward Tailorable NIR-II Luminescence and Ligand-Mediated Biodistribution and Clearance

Oxidant-driven and controllable etching of small-sized nanoparticles (NPs, d < 3 nm) and tailorable modulation of their optical properties are challenging due to the high reactivity and complicated surface chemistry. Herein, we present a facile strategy for highly controllable oxidative etching of ultrasmall AuNPs and tailorable modulation of luminescence. The proper choice of a moderate oxidant, ClO-, could not only selectively etch the Au(I)-thiolate motifs from the nanoparticle surface at the subnanometer scale but also retained a stable metallic core structure without aggregation, which impressively prompted the wide-range luminescent switching from the visible to second near-infrared (NIR-II) region. The resultant oxidized AuNPs displayed highly luminescent NIR-II emission with a quantum yield of 3.0%, excellent monodispersed stability, ideal biocompatibility, and tunable shielding effects against protein adsorption. With those outstanding features, oxidized AuNPs could be utilized as nanoprobes for long-lasting and in vivo bioimaging of associated metabolic behaviors with distinguishable organ-specific targeting capabilities and ligand-mediated kinetics in nanoparticle clearance. These findings expand the toolbox of oxidants for the controllable synthesis of NIR-II nanoprobes and open up a path for exploring diverse ligand interactions on ultrasmall AuNPs with organs or tissues that might advance their monitoring applications for a wide range of clinically important diseases.

Recent Advances in Luminophores for Enhanced Electrochemiluminescence Analysis

Electrochemiluminescence (ECL) detection is widely applied in many fields, including chemical measurement, biological analysis, and clinic tests, due to its high sensitivity. Currently, the fast development of many new electrochemical luminophores is continuously improving the ECL-based detection ability. Besides the enhancement of luminescence emission for a high detection sensitivity, minimizing the effect of co-reactants on ECL detection and achieving multiple analysis in one sample are also the main directions in this field. This review focuses on a summary of recently prepared new luminophores to achieve the three aims mentioned above. Especially, the review is composed by three parts, focusing on the luminophores or materials with high ECL efficiency, self-enhancing properties, and multi-color ECL luminophores. The fabrication of biosensors using these molecules is also reviewed to exhibit the advances in biological applications.

Confinement Effect Enhanced Bipolar Electrochemistry: Structural Color Coding Coupled with Wireless Electrochemiluminescence Imaging Technology

In this work, SiO2/CNTs photonic crystal beads were constructed by doping CNTs into SiO2 photonic crystals, which have an angle-independent responsive structural color and can be used as bipolar electrodes due to their good electrical conductivity. In addition, the bipolar electrode-electrochemiluminescence (BPE-ECL) experiments and finite element simulation prove that the low driving voltage can trigger the bipolar electrode electrochemical reactions by confinement effect. Inspired by this, it is the first to combine the SiO2/CNTs structural color coding scheme with low-drive voltage induced wireless BPE-ECL imaging based on the confinement effect of microchannels to achieve simultaneous immune detection of ovarian cancer biomarkers (CA125, CEA, AFP). The detection limits of successfully constructed high-throughput BPE-ECL biosensor for AFP, CEA, and CA125 are 0.72 ng/mL, 0.95 ng/mL, and 1.03 U/mL, respectively, and have good stability and specificity, which expands the application of electrochemiluminescence and lays a foundation for the development of electrochemiluminescence coding technology.

Recent Advances in Electroluminescent Metallic Nanoclusters: From Materials to Devices

Metallic nanoclusters (MNCs) were developed rapidly in recent decades, owing to their unique electronic structures and excited state characteristics, leading to their wide applications. Luminescence as one of the most important functions for MNCs has also been used to realize biodetection, displays, and lighting, through either electrochemiluminescence (ECL) or electroluminescence (EL). Both emissive properties and electrochemical activities of MNCs were utilized to enhance ECL and EL through facilitating exciton formation and radiation, rendering the rapid emerging of the latter in the last ten years. Through ligand modification, radiative excited-state components were increased to realize state-of-the-art photo- and electroluminescence efficiencies up to ∼100% and ∼30%, as well as ultralow biodetection limits. Nonetheless, material selection space and processing technologies are still limited. Herein, we overview and discuss recent advances of MNCs-based ECL and EL, through both aspects of materials/systems and devices, which would enlighten continuous innovations in optoelectronic MNCs.

Two Birds with one Stone: Dual-mode immunoassay constructed using a novel emitter ethylene glycol-induced perylene diimide and a multifunctional ANS probe

Perylene diimide (PDI) is a readily reducible electron-deficient dye that exhibits strong photoluminescent properties, providing new opportunities for synthesizing novel electrochemiluminescence (ECL) emitters. In this study, ethylene glycol (EG) was used to induce the self-assembly of PDI supramolecules for the preparation of ultrathin EG-PDI nanosheets characterized by low crystallinity and weak stacking interaction. Notably, EG-PDI integrates luminescent and catalytic functions into one device, accelerating the interfacial electron transfer and the faster charge transfer kinetics of EG-PDI with K2S2O8. Furthermore, the narrow band gap of EG-PDI facilitates its excitation at an ultra-low potential (-0.3 V). To improve the efficiency of tumor marker analysis, multifunctional Au nanostars (ANS) was introduced both as an energy acceptor of the ECL system and a probe for the photothermal system. Dual-mode immunoassay have demonstrated superior analytical performance in detecting alpha-fetoprotein (AFP), meeting the requirements of modern clinical diagnostics in resource-limited environments.

Timescale correlation of shallow trap states increases electrochemiluminescence efficiency in carbon nitrides

Highly efficient interconversion of different types of energy plays a crucial role in both science and technology. Among them, electrochemiluminescence, an emission of light excited by electrochemical reactions, has drawn attention as a powerful tool for bioassays. Nonetheless, the large differences in timescale among diverse charge-transfer pathways from picoseconds to seconds significantly limit the electrochemiluminescence efficiency and hamper their broad applications. Here, we report a timescale coordination strategy to improve the electrochemiluminescence efficiency of carbon nitrides by engineering shallow electron trap states via Au-N bond functionalization. Quantitative electrochemiluminescence kinetics measurements and theoretic calculations jointly disclose that Au-N bonds endow shallow electron trap states, which coordinate the timescale of the fast electron transfer in the bulk emitter and the slow redox reaction of co-reagent at diffusion layers. The shallow electron trap states ultimately accelerate the rate and kinetics of emissive electron-hole recombination, setting a new cathodic electrochemiluminescence efficiency record of carbon nitrides, and empowering a visual electrochemiluminescence sensor for nitrite ion, a typical environmental contaminant, with superior detection range and limit.

Bimodal Oxidation Electrochemiluminescence Mechanism of Coreactant-Embedded Covalent Organic Frameworks via Postsynthetic Modification

Electrochemiluminescence (ECL) efficiency is determined by charge transfer between coreactants and emitters in coreactant systems, which are usually limited by their slow intermolecular charge transfer. In this study, a covalent organic framework (COF) with aldehyde residue was synthesized, and then coreactants were covalently integrated into the skeleton through the postsynthetic modification strategy, resulting in a crystalline coreactant-embedded COF nanoemitter (C-COF). Compared to the pristine COF with an equivalent external coreactant, C-COF exhibited an extraordinary 1008-fold enhancement of ECL intensity due to the rapid intrareticular charge transfer. Significantly, with the pH increase, C-COF shows protonation-induced ECL enhancement for the first ECL peaked at +1.1 V and an opposite trend for the second ECL at +1.4 V, which were attributed to the antedating oxidation of coreactant in framework and COF self-oxidation, respectively. The resulting bimodal oxidation ECL mechanism was rationalized by spectral characterization and density functional theory calculations. The postsynthetic coreactant-embedded nanoemitters present innovative and universal avenues for advancing ECL systems.

Coupled Poly(ethylenimine) Coreactant to Enhance Electrochemiluminescence of Polymer Dots for Array Imaging of Protein Biomarkers

Traditional electrochemiluminescent (ECL) bioanalysis suffers from the demand for excessive external coreactants and the damage of reaction intermediates. In this work, a poly(ethylenimine) (PEI)-coupled ECL emitter was proposed by covalently coupling tertiary amine-rich PEI to polymer dots (Pdots). The coupled PEI might act as a highly efficient coreactant to enhance the ECL emission of Pdots through intramolecular electron transfer, reducing the electron transfer distance between emitter and coreactant intermediates and avoiding the disadvantages of traditional ECL systems. Through modification of the PEI-Pdots with tDNA, a sequence partially complementary to cDNA that was complementary to the aptamer of target protein biomarker (aDNA), tDNA-PEI-Pdots were obtained. The biosensors were produced using Au/indium tin oxide (ITO) with an aDNA/cDNA hybrid, and an ECL imaging biosensor array was constructed for ultrasensitive detection of protein biomarkers. Using vascular endothelial growth factor 165 (VEGF165) as a protein model, the proposed ECL imaging method containing two simple incubations with target samples and then tDNA-PEI-Pdots showed a detectable range of 1 pg mL-1 to 100 ng mL-1 and a detection limit of 0.71 pg mL-1, as well as excellent performance such as low toxicity, high sensitivity, excellent selectivity, good accuracy, and acceptable fabrication reproducibility. The PEI-coupled Pdots provide a new avenue for the design of ECL emitters and the application of ECL imaging in disease biomarker detection.

Postsynthetic Modification Strategy for Constructing Electrochemiluminescence-Active Chiral Covalent Organic Frameworks Performing Efficient Enantioselective Sensing

Electrochemiluminescence (ECL), integrating the characteristics of electrochemistry and fluorescence, has the advantages of high sensitivity and low background. However, only a few studies have been reported for enantioselective sensing based on the ECL-active platform because of the huge challenges in constructing tunable chiral ECL luminophores. Here, we developed a facile strategy to design and prepare ECL-active chiral covalent organic frameworks (COFs) Ph-triPy+-(R)-Ru(II) for enantioselective sensing. In such an artificial structure, the ionic skeleton of COFs was beneficial to the electron transfer on the working electrode surface and the chiral Ru-ligand was used as the chiral ECL-active luminophore. It was found that Ph-triPy+-(R)-Ru(II) coupled with sodium persulfate (Na2S2O8) as the coreactant exhibited obvious ECL signals. More importantly, a clear difference toward l- and d-enantiomers was observed in the response of the ECL intensity, resulting in a uniform recognition law. That is, for amino alcohols, d-enantiomers (1 mM) measured by Ph-triPy+-(R)-Ru(II) showed a higher ECL intensity compared with l-enantiomers. Differently, amino acids (1 mM) gave an inverse recognition phenomenon. The ECL intensity ratios between l- and d-enantiomers (1 mM) are in the range of 1.25-1.94 for serine, aspartic acid, glutamic acid, valine, leucine, leucinol, and valinol. What is more interesting is that the ECL intensity was closely related to the concentration of l-amino alcohols and d-amino acids, whereas their inverse configurations remained unchanged. In a word, the present concept demonstrates a feasible direction toward chiral ECL-active COFs and their potential for efficient enantioselective sensing.

Hydrogen-Bonded Organic Cocrystal-Encapsulated Perovskite Nanocrystals as Coreactant-Free Electrochemiluminescent Luminophore for the Detection of Uranium

Lead halide perovskite nanocrystals with excellent photophysical properties are promising electrochemiluminescence (ECL) candidates, but their poor stability greatly restricts ECL applications. Herein, hydrogen-bonded cocrystal-encapsulated CsPbBr3 perovskite nanocrystals (PeNCs@NHS-M) were synthesized by using PeNCs as nuclei for inducing the crystallization of melamine (M) and N-hydroxysuccinimide (NHS). The as-synthesized composite exhibits multiplicative ECL efficiencies (up to 24-fold that of PeNCs) without exogenous coreactants and with excellent stability in the aqueous phase. The enhanced stability can be attributed to the well-designed heterostructure of the PeNCs@NHS-M composite, which benefits from both moiety passivation and protection of the peripheral cocrystal matrix. Moreover, the heterostructure with covalent linkage facilitates charge transfer between PeNCs and NHS-M cocrystals, realizing effective ECL emission. Meanwhile, the NHS and M components act as coreactants for PeNCs, shortening the electron-transport distance and resulting in a significant increase in the ECL signal. Furthermore, by taking advantage of the specific binding effect between NHS-M and uranyl (UO22+), an ECL system with both a low detection limit (1 nM) and high selectivity for monitoring UO22+ in mining wastewater is established. The presence of UO22+ disrupted the charge-transfer effect within PeNCs@NHS-M, weakening the ECL signals. This work provides an efficient design strategy for obtaining stable and efficient ECLs from perovskite nanocrystals, offering a new perspective for the discovery and application of perovskite-based ECL systems.

Boosting Photon Emission from the Chemiluminescence of Luminol Based on Host-Guest Recognition for the Determination of Dopamine

Modulating the photon emission of the luminophore for boosting chemiluminescence (CL) response is very crucial for the construction of highly sensitive sensors via the introduction of functionalized materials. Herein, the integration of the emitter and coreactant accelerator into one entity is realized by simply assembling cucurbit[7]uril (CB[7]) on the surface of gold nanoparticles (AuNPs) through simple assembly via a Au-O bond. The loaded CB[7] on the AuNPs improves their catalytic capacity for the generation of hydroxyl radicals(•OH). Moreover, the host-guest recognition interaction between luminol and CB[7] enables the capture of luminol on AuNPs efficiently. Also, the intramolecular electron-transfer reaction between the luminol and •OH enables the CL response more effectively in the entity, which greatly boosts photon emission ca 100 folds compared with the individual luminol/H2O2. The host-guest recognition between luminol and CB[7] is revealed by Fourier transform infrared spectroscopy, electrochemical, and thermogravimetric characterization. Moreover, the proposed CL system is successfully used for the sensitive and selective determination of dopamine (DA) based on a synergistic quenching mechanism including the competition quenching and radical-scavenging effect from DA. The present amplified strategy by integrating recognized and amplified elements within one entity simplifies the sensing process and holds great potential for sensitive analysis based on the self-enhanced strategies.

Nanoconfined Cathodic Electrochemiluminescence for Self-Sensitized Bioimaging of Membrane Protein

Self-enhanced electrochemiluminescence (ECL) can be achieved via the confinement of coreactants and ECL emitters in a single nanostructure. This strategy has been used for the design of anodic ECL systems with amine compounds as coreactants. In this work, a novel confinement system was proposed by codoping positively charged ECL emitter tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) and negatively charged coreactant peroxydisulfate (S2O82-) in silica nanoparticles. The codoping process could be performed by introducing S2O82- in cationic poly(diallyldimethylammonium chloride) (PDDA) to form PDDA@S2O82- and then encapsulating it and Ru(bpy)32+ in the Triton X-100 vesicle followed by the hydrolysis of tetraethyl ortosilicate, surface modification, and demulsification. The obtained RuSSNs exhibited good homogeneity, excellent monodispersity, acceptable biocompatibility, and 2.9-fold stronger ECL emission than Ru(bpy)32+-doped silica nanoparticles at an equal amount of nanoparticles in the presence of 0.1 M K2S2O8. Thus, an in situ self-sensitized cathodic ECL imaging method was designed for the monitoring of glycoprotein on living cell membranes. This work provides a new way for the modification, enhancement, and application of nano-ECL emitters in biological analysis.

Spherical nucleic acid enzyme programmed network to accelerate CRISPR assays for electrochemiluminescence biosensing applications

Given the targeted binding ability and cleavage activity of the emerging CRISPR/Cas12a assay which transduces the target into its cleavage activity exhibited broadly prospective applications in integrated sensing and actuating system. Here, we elaborated a universal approach to quickly activate CRISPR/Cas12a for low-abundance biomarker detection based on the amplification strategy of a target-induced spherical nucleic acid enzyme (SNAzyme) network that could accelerate the output of activators. Specifically, multifunctional Y-shaped probes and hairpin probes (HPs, which contained the specific sequence of the activators of CRISPR/Cas12a and the substrate chain of DNAzyme) were rationally designed to construct SNAzyme. Target recognition induced disassembly of the Y-shaped probes, which released DNAzyme strands to active DNAzyme and accompanied by SNAzyme self-assembly into SNAzyme network. Interestingly, compared with randomly dispersed SNAzyme, the reaction kinetics of the SNAzyme network enhanced 1.6 times in response to Α-methyl acyl-CoA racemase (AMACR, a biomarker for prostate cancer), which was attributed to the promoted catalytic efficiency of DNAzyme by the confined SNAzyme network. Benefiting from these, the prepared biosensor based on electrochemiluminescence (ECL) platform by loading AuAg nanoclusters (AuAgNCs) into metal-organic framework-5 (MOF-5) exhibited satisfying detection performance for AMACR with a wide linear range (0.001 μg/mL to 100 μg/mL) and a low detection limit (1.0 × 10-4 μg/mL, which exhibited significant potential in clinical diagnoses.

Electrochemiluminescence resonance energy transfer between a Ru-ZnMOF self-enhanced luminophore and a double quencher ZnONF@PDA to detect NSE

The construction of advanced systems capable of accurately detecting neuron-specific enolase (NSE) is essential for rapidly diagnosing small-cell lung cancer. In this study, an electrochemiluminescence (ECL) resonance energy transfer immunosensor was proposed for the ultra-sensitive detection of NSE. The co-reactants C2O42- and Ru(bpy)32+ were integrated to form a self-enhanced ECL luminophore (Ru-ZnMOF) as the ECL donor. The abundant carboxyl functional groups of Ru-ZnMOF supported antibody 1 via an amidation reaction. Polydopamine-modified zinc dioxide nanoflowers, as ECL acceptors, inhibited Ru-ZnMOF ECL signaling. The linear range of NSE was 10 fg mL-1 to 100 ng mL-1 with a detection limit of 3.3 fg mL-1 (S/N = 3), which is suitably low for determining NSE in real samples.

Bright near-infrared circularly polarized electrochemiluminescence from Au9Ag4 nanoclusters

Metal nanoclusters are excellent electrochemiluminescent luminophores owing to their rich electrochemical and optical properties. However, the optical activity of their electrochemiluminescence (ECL) is unknown. Herein, we achieved, for the first time, the integration of optical activity and ECL, i.e., circularly polarized electrochemiluminescence (CPECL), in a pair of chiral Au9Ag4 metal nanocluster enantiomers. Chiral ligand induction and alloying were employed to endow the racemic nanoclusters with chirality and photoelectrochemical reactivity. S-Au9Ag4 and R-Au9Ag4 exhibited chirality and bright-red emission (quantum yield = 4.2%) in the ground and excited states. The enantiomers showed mirror-imaged CPECL signals at 805 nm owing to their highly intense and stable ECL emission in the presence of tripropylamine as a co-reactant. The ECL dissymmetry factor of the enantiomers at 805 nm was calculated to be ±3 × 10-3, which is comparable with that obtained from their photoluminescence. The obtained nanocluster CPECL platform shows the discrimination of chiral 2-chloropropionic acid. The integration of optical activity and ECL in metal nanoclusters provides the opportunity to achieve enantiomer discrimination and local chirality detection with high sensitivity and contrast.

S-CdIn2S4: A novel near-infrared emitter triggered by low potential for constructing a dual-mode immunosensing platform

CdIn₂S₄ is an interesting ternary metal sulfide whose narrow band gap and tunable optical properties offer new opportunities for the development of novel ECL emitters. Here, we use a simple hydrothermal synthesis to obtain hollow spindle CdIn₂S₄ (S-CIS), which exhibits strong near-infrared electrochemiluminescence (ECL) emission with K₂S₂O₈ as a coreactant at a low excitation potential (-1.3 V), which is encouraging. The lower excitation potential of S-CIS is probably due to the low band gap energy, which makes the excitation potential positively shift. This lower excitation potential reduces the side-reactions caused by high voltages, effectively avoiding irreversible damage to biomolecules, and protecting the biological activity of antigens and antibodides. In this work, new features of S-CIS in ECL studies are also presented, demonstrating that the ECL emission mechanism of S-CIS is generated by surface state transitions and that S-CIS exhibits excellent near-infrared (NIR) characteristics. Importantly, we introduced S-CIS into electrochemical impedance spectroscopy (EIS) and ECL to the construct a dual-mode sensing platform to achieve AFP detection. The two models with intrinsic reference calibration and high accuracy showed outstanding analytical performance in AFP detection. The detection limits were 0.862 pg mL^-1 and 16.8 fg mL^-1, respectively. This study demonstrates the key role and great application potential of S-CIS as a novel NIR emitter with easy preparation, low cost and great performance in the development of a simple, efficient and ultrasensitive dual-mode response sensing platform for early clinical use.

Ultrasmall Coinage Metal Nanoclusters as Promising Theranostic Probes for Biomedical Applications

Ultrasmall coinage metal nanoclusters (NCs, <3 nm) have emerged as a novel class of theranostic probes due to their atomically precise size and engineered physicochemical properties. The rapid advances in the design and applications of metal NC-based theranostic probes are made possible by the atomic-level engineering of metal NCs. This Perspective article examines (i) how the functions of metal NCs are engineered for theranostic applications, (ii) how a metal NC-based theranostic probe is designed and how its physicochemical properties affect the theranostic performance, and (iii) how metal NCs are used to diagnose and treat various diseases. We first summarize the tailored properties of metal NCs for theranostic applications in terms of biocompatibility and tumor targeting. We focus our discussion on the theranostic applications of metal NCs in bioimaging-directed disease diagnosis, photoinduced disease therapy, nanomedicine, drug delivery, and optical urinalysis. Lastly, an outlook on the challenges and opportunities in the future development of metal NCs for theranostic applications is provided.

Unique Electron-Transfer-Mediated Electrochemiluminescence of AuPt Bimetallic Nanoclusters and the Application in Cancer Immunoassay

Noble Metal nanoclusters (NCs) are promising electrochemiluminescence (ECL) emitters due to their amazing optical properties and excellent biocompatibility. They have been widely used in the detection of ions, pollutant molecules, biomolecules, etc. Herein, we found that glutathione-capped AuPt bimetallic NCs (GSH-AuPt NCs) emitted strong anodic ECL signals with triethylamine as co-reactants which had no fluorescence (FL) response. Due to the synergistic effect of bimetallic structures, the ECL signals of AuPt NCs were 6.8 and 94 times higher than those of monometallic Au and Pt NCs, respectively. The electric and optical properties of GSH-AuPt NCs differed from those of Au and Pt NCs completely. An electron-transfer mediated ECL mechanism was proposed. The excited electrons may be neutralized by Pt(II) in GSH-Pt and GSH-AuPt NCs, resulting in the vanished FL. Furthermore, abundant TEA radicals formed on the anode contributed electrons to the highest unoccupied molecular orbital of GSH-Au_2.5Pt NCs and Pt(II), booming intense ECL signals. Because of the ligand effect and ensemble effect, bimetallic AuPt NCs exhibited much stronger ECL than GSH-Au NCs. A sandwich-type immunoassay for alpha fetoprotein (AFP) cancer biomarkers was fabricated with GSH-AuPt NCs as signal tags, which displayed a wide linear range from 0.01 to 1000 ng·mL^-1 and a limit of detection (LOD) down to 1.0 pg·mL^-1 at 3S/N. Compared to previous ECL AFP immunoassays, this method not only had a wider linear range but also a lower LOD. The recoveries of AFP in human serum were around 108%, providing a wonderful strategy for fast, sensitive, and accurate cancer diagnosis.

Non-enzymatic electrochemiluminescence biosensor for ultrasensitive detection of ochratoxin A based on efficient DNA walker

Ochratoxin A (OTA) with high toxicity represents a serious threat to the agriculture and food chain, consequently to human health. Herein, a simple electrochemiluminescence (ECL) biosensor was constructed for ultrasensitive detection of OTA based on mercaptopropionic acid templated Au nanoclusters (Au NCs) as intensive signal probe and a non-enzymatic 2D DNA walking machine as the effective amplification strategy. Specifically, the target related bipedal DNA walker efficiently moved along 2D DNA tracks through toehold-mediated DNA strand displacement, which triggered abundant signal probes for combining to the DNA tracks. Moreover, the Au NCs could exhibit strong ECL emission due to fast electron transfer from massive Au-S electronic pathways under the electrochemical excitation. Thus, the biosensor possessed significant ECL response for achieving ultrasensitive detection toward OTA with low detection limit of 3.19 fg/mL. Impressively, the sensing platform was also applied to detect OTA from edible oils, exhibiting great application potential in food analysis.

Single-Electron Charging of Thioctic Acid Monolayer-Protected Gold Clusters

There is great interest in the use of Monolayer-Protected Gold Clusters (AuMPCs) as nanoscale capacitors in aqueous media for nanobiotechnological applications, such as bioelectrocatalysts, biofuel cells, and biosensors. However, AuMPCs exhibiting subattofarad double-layer capacitance at room temperature, and the resolution of single-electron charging, has been mainly obtained in an organic medium with nonfunctional capping ligands. We report here the synthesis of Thioctic Acid Monolayer-Protected Au Clusters (TA-AuMPCs) showing electrochemical single electron quantized capacitance charging in organic and aqueous solutions and when immobilized onto different self-assembled monolayer-modified gold electrodes. The presence of functional carboxylic groups opens a simple strategy for interfacing a nanoparticle assembly to biomolecules for their use as electron donors or acceptors in biological electron transfer reactions.

In situ coordination interactions between metal-organic framework nanoemitters and coreactants for enhanced electrochemiluminescence in biosensing

Coreactant electrochemiluminescence (ECL) is one of the most popular pathways in commercial analysis, which can provide simplicity and convenience for getting intense ECL emission. However, the low efficiency of intermolecular electron transfer could weaken ECL intensity. In this work, we developed an enhanced ECL strategy through in situ coordination interactions between metal-organic framework emitters and coreactants. First, a metal-organic framework (MOF) emitter was synthesized with 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethane (TPPE) as aggregation-induced emission linkers and Zn as nodes. Interestingly, compared to TPPE ligand, the resulted MOF nanoemitters demonstrated 49.5 folds enhancement of ECL emission in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) as the coreactant. More significantly, different from the constant ECL intensity using TPrA coreactant, DABCO exhibited time-dependent ECL intensity due to the intrareticular electron transfer through coordination interaction between DABCO and Zn²⁺, which was confirmed by X-ray photoelectron spectroscopy and Fourier transform infrared spectral experiments. The enhanced ECL was then applied to construct a sensitive ECL method to detect dopamine in serum samples. The coordination interaction between emitters and coreactants not only provides a universal way to enhance ECL, but also expands the applications of coreactant ECL system in convenience route.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Fabrication of a ratiometric electrochemiluminescence biosensor using single self-enhanced nanoluminophores for the detection of spermine

A ratiometric electrochemiluminescence strategy using a single luminophore for accurate and sensitive biomolecule detection could be immensely valuable in bioanalysis. Herein, an ultrasensitive ratiometric electrochemiluminescence sensing system was fabricated using a self-enhanced luminophore with dual-signal emission for the detection of spermine. A nanocomposite was synthesized by the covalent attachment of N, N-diisopropylethylenediamine onto glutathione-protected Au-Ag bimetallic nanoclusters (DPEA-GSH@Au/Ag BNCs). The nanocomposite exhibited efficient intra-cluster charge transfer to produce strong anodic self-enhanced electrochemiluminescence emission at 0.8 V without external co-reactants. Interestingly, the DPEA@GSH@Au-Ag BNCs exhibited cathodic electrochemiluminescence emission upon the addition of the co-reactant potassium persulfate at -1.6 V, exhibiting stable and efficient dual-signal electrochemiluminescence emission features at a continuous potential window of -1.75 to 1.2 V. Thus, they were used to fabricate a single-luminophore electrochemiluminescence sensor with dual emission. The cathodic emission of the biosensor gradually increased with increasing concentrations of spermine, whereas the anodic electrochemiluminescence intensity remained almost constant, enabling the ratiometric detection of spermine. The fabricated biosensor, with an internal standard, significantly improved the accuracy and reliability of spermine detection in a wide concentration range of 0.85 pM-100 μM, with a low limit of detection of 0.12 pM (S/N = 3) under optimum conditions. This single-luminophore electrochemiluminescence sensing system could be used for the detection of spermine and could guide the construction of ratiometric electrochemiluminescence sensors in the future.

Schiff Base Complexes with Covalently Anchored Luminophores: Self-Enhanced Electrochemiluminescence Detection of Neomycin

A novel electrochemiluminescence (ECL) amplification strategy was established aiming to overcome the inherent shortcomings of the current oxygen (O₂) coreactant ECL systems. Macrocyclic Schiff base Fe complexes were rationally designed as a novel integrated ECL emitter by iminium linkage between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and 1,10-phenanthroline-2,9-dicarbaldehyde (PDL) and postmetalation of the macrocyclic Schiff base. Covalently combining luminophore ABEI with a catalytic center endowed the novel ECL emitter with both remarkable redox electrocatalytic properties and significantly enhanced ECL efficiency. The high content of ferrous iron and the dominantly active low-spin Fe state greatly contributed to the inherent catalytic activity for O₂ activation. The rational modification of luminophore optimized the spatial distribution and simultaneously shortened the species transport distance of coreactant radicals generated in situ from dissolved O₂, resulting in significantly self-enhanced ECL efficiency. Neomycin, which posed a growing threat to aquatic biodiversity and environmental safety, as the model antibiotic was successfully detected with a detection limit of 0.21 pM (S/N = 3), clarifying a promising application prospect of this new luminophore-embedded ECL amplification strategy in biological analysis and environmental monitoring.

2D Zn-Porphyrin-Based Co(II)-MOF with 2-Methylimidazole Sitting Axially on the Paddle-Wheel Units: An Efficient Electrochemiluminescence Bioassay for SARS-CoV-2

High electrocatalytic activity with tunable luminescence is crucial for the development of electrochemiluminescence (ECL) luminophores. In this study, a porphyrin-based heterobimetallic 2D metal organic framework (MOF), [(ZnTCPP)Co2(MeIm)] (1), is successfully self-assembled from the zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP) linker and cobalt(II) ions in the presence of 2-methylimidazole (MeIm) by a facile one-pot reaction in methanol at room temperature. On the basis of the experimental results and the theoretical calculations, the MOF 1 contains paddle-wheel [Co2(-CO2)4] secondary building units (SBUs) axially coordinated by a MeIm ligand, which is very beneficial to the electron transfer between the Co(II) ions and oxygen. Combining the photosensitizers ZnTCPP and the electroactive [Co2(-CO2)4] SBUs, the 2D MOF 1 possesses an excellent ECL performance, and can be used as a novel ECL probe for rapid nonamplified detection of the RdRp gene of SARS-CoV-2 with an extremely low limit of detection (≈30 aM).

Electrochemiluminescence Systems for the Detection of Biomarkers: Strategical and Technological Advances

Electrochemiluminescence (ECL)-based sensing systems rely on light emissions from luminophores, which are generated by high-energy electron transfer reactions between electrogenerated species on an electrode. ECL systems have been widely used in the detection and monitoring of diverse, disease-related biomarkers due to their high selectivity and fast response times, as well as their spatial and temporal control of luminance, high controllability, and a wide detection range. This review focuses on the recent strategic and technological advances in ECL-based biomarker detection systems. We introduce several sensing systems for medical applications that are classified according to the reactions that drive ECL signal emissions. We also provide recent examples of sensing strategies and technologies based on factors that enhance sensitivity and multiplexing abilities as well as simplify sensing procedures. This review also discusses the potential strategies and technologies for the development of ECL systems with an enhanced detection ability.

Surface Defect-Involved and Single-Color Electrochemiluminescence of Gold Nanoclusters for Immunoassay

Single-color electrochemiluminescence (ECL) of nanoparticles is normally achieved in a bandgap engineered route via passivating the nanoparticle surface. Herein, when linear mercaptoalkanoic acids are employed as the thiol-capping agent of unary Au nanoclusters (NCs), a single-stabilizer-capped strategy is proposed to achieve surface defect-involved and single-color ECL from the AuNCs with hydrazine (N2H4) as the coreactant. The carbon skeleton of the linear mercaptoalkanoic acids exhibits important effects on the ECL of the AuNCs, and efficient oxidative-reductive ECL is achieved with 8-mercaptooctanoic acid (MOA), 11-mercaptoundecanoic acid (MUA), and 12-mercaptododecanoic acid (MDA) capped AuNCs, respectively. The ECL of these AuNCs not only exhibits similar ECL intensity-potential profiles with the same maximum emission potential of ∼1.20 V (vs Ag/AgCl), but also demonstrates almost identical spectral ECL profiles of the same maximum emission wavelength around 713 nm as well as the same fwhm of 64 nm. The ECL of AuNCs/N2H4 is obviously red-shifted to the photoluminescence of AuNCs, which not only provides unambiguous evidence that bandgap-engineered ECL of these AuNCs is quenched but also manifests that the capping agent of linear mercaptoalkanoic acid is promising for the achievement of surface defect-involved and single-color ECL from AuNCs. The MUA capped AuNCs can be utilized as an ECL tag for a sensitive and selective immunoassay, which exhibits a broad linear range from 0.5 mU/mL to 1 U/mL with a low limit of detection of 0.1 mU/mL (S/N = 3) with CA125 as the model analyte. This work provides a promising alternative to the traditional surface-passivating strategy for the achievement of single-color ECL from nanoparticle luminophores.

Kinetics-Based Ratiometric Electrochemiluminescence Analysis for Signal Specificity: Case Studies of Piperazine Drug Discrimination with Au Nanoclusters

A multi-parameter calibration and analysis strategy has been developed based on the kinetics of charge transfer reactions. Absolute and ratiometric electrochemiluminescence signals are elucidated from single measurements for the detection of hydroxyzine and cetirizine as prototype drugs which greatly enhance the near-infrared electrochemiluminescence from atomically precise Au₂₂ nanoclusters stabilized with lipoic acid ligands on ITO electrodes. The signal-on sensing mechanism eliminates the need for recognition elements and highly excess co-reactants in conventional electrochemiluminescence practice. The rates of sequential charge transfer reactions render specificity in electrochemiluminescence intensity and kinetics toward the target molecular/electronic structures and are conveniently controlled/optimized by operation parameters. Signal kinetic profiles, in stark contrast to steady-state or single-point recordings, not only improve the signal/noise ratio but also offer greater resolving power to differentiate analogue species and nonspecific interference. The fundamental kinetics-based ratiometric concept/strategy is not limited to a specific luminophore or a co-reactant and is thus generalizable. The case studies successfully detect and discriminate drug compounds at sub-nanomolar physiological ranges, with efficacy validated using synthetic urine toward point-of-care applications in therapeutic/abuse drug monitoring.

Low-Triggering-Potential Single-Color Electrochemiluminescence from Bovine Serum Albumin-Stabilized Unary Au Nanocrystals for Immunoassays

Herein, low-triggering-potential (LTP) electrochemiluminescence (ECL) with an onset around 0.0 V (vs Ag/AgCl) is proposed with bovine serum albumin (BSA)-stabilized Au nanocrystals (BSA-AuNCs) as a luminophore and hydrazine hydrate (N₂H₄) as a coreactant. The BSA-AuNCs/N₂H₄ system can exhibit efficient LTP-ECL around 0.37 V with the luminophore of both monodispersed and surface-confined states. The LTP-ECL of BSA-AuNCs/N₂H₄ is a kind of single-color emission with a maximum emission wavelength around 740 nm, which is obviously red-shifted for 80 nm from that of BSA-AuNCs PL, and indicates that the ECL is generated in a surface-defect-involved route instead of the band-gap-engineered route. Importantly, BSA-AuNCs can be utilized as ECL tags to perform sandwich-type immunoassays with acceptable sensitivity and selectivity, which exhibits a wide linear response for determining CA125 from 0.5 to 1000 mU/mL and a limit of detection of 0.05 mU/mL (S/N = 3).

Graphdiyne: A New Carbon Allotrope for Electrochemiluminescence

Graphdiyne (GDY), a well-known 2D carbon allotrope, demonstrates increasing fantastic performance in various fields owing to its outstanding electronic properties. Owing to its unique properties, electrochemiluminescence (ECL) technology is one powerful tool for understanding fundamental questions and for ultrasensitive sensing and imaging. Here, we firstly find that GDY without any functionalization or treatment shows a strong ECL emission with potassium persulfate (K₂ S₂ O₈ ) as coreactant, which is totally different with other carbon allotropes. Mechanistic study indicates that the ECL emission of GDY is generated by the surface state transition. Interestingly, ECL is generated at 705 nm in the near infrared region with an ECL efficiency of 424 % compared to that of Ru(bpy)₃ Cl₂ /K₂ S₂ O₈ . The study demonstrates a new character of GDY in ECL investigation and sets the stage for the development of GDY for emerging applications, including imaging and light-emitting devices.

Identifying the Real Chemistry of the Synthesis and Reversible Transformation of AuCd Bimetallic Clusters

The capability of precisely constructing bimetallic clusters with atomic accuracy provides exciting opportunities for establishing their structure-property correlations. However, the chemistry (the charge state of precursors, the property of ligands, the amount of dopant, and so forth) dictating the fabrication of clusters with atomic-level control has been a long-standing challenge. Herein, based on the well-defined Au₂₅(SR)₁₈ cluster (SR = thiolates), we have systematically investigated the factors of steric hindrance and electronic effect of ligands, the charge state of Au₂₅(SR)₁₈, and the amount of dopant that may determine the structure of AuCd clusters. It is revealed that [Au₁₉Cd₃(SR)₁₈]^- can be obtained when a ligand of smaller steric hindrance is used, while Au₂₄Cd(SR)₁₈ is attained when a larger steric hindrance ligand is used. In addition, negatively charged [Au₂₅(SR)₁₈]^- is apt to form [Au₁₉Cd₃(SR)₁₈]^- during Cd doping, while Au₂₄Cd(SR)₁₈ is produced when neutral Au₂₅(SR)₁₈ is used as a precursor. Intriguingly, the reversible transformation between [Au₁₉Cd₃(SR)₁₈]^- and Au₂₄Cd(SR)₁₈ is feasible by subtly manipulating ligands with different steric hindrances. Most importantly, by introducing the excess amount of dopant, a novel bimetallic cluster, Au₄Cd₄(SR)₁₂ is successfully fabricated and its total structure is fully determined. The electronic structures and the chirality of Au₄Cd₄(SR)₁₂ have been elucidated by density functional theory (DFT) calculations. Au₄Cd₄(SR)₁₂ reported herein represents the smallest AuCd bimetallic cluster with chirality.

Recent progress of metal nanoclusters in electrochemiluminescence

Metal nanoclusters (MeNCs), composed of a few to hundreds of metal atoms and appropriate surface ligands, have attracted extensive interest in the electrochemiluminescence (ECL) realm owing to their molecule-like optical, electronic, and physicochemical attributes and are strongly anticipated for discrete energy levels, fascinating electrocatalytic activity, and good biocompatibility. Over the past decade, huge efforts have been devoted to the synthesis, properties, and application research of ECL-related MeNCs, and this field is still a subject of heightened concern. Therefore, this perspective aims to provide a comprehensive overview of the recent advances of MeNCs in the ECL domain, mainly covering the emerged ECL available MeNCs, unique chemical and optical properties, and the general ECL mechanisms. Synthesis strategies for desirable ECL performance are further highlighted, and the resulting ECL sensing applications utilizing MeNCs as luminophores, quenchers, and substrates are discussed systematically. Finally, we anticipate the future prospects and challenges in the development of this area.

Hollow Double-Shell CuCo2O4@Cu2O Heterostructures as a Highly Efficient Coreaction Accelerator for Amplifying NIR Electrochemiluminescence of Gold Nanoclusters in Immunoassay

The evolution of electrochemiluminescence (ECL) emission amplified by coreaction accelerator in near-infrared (NIR) area has been overwhelmingly anticipated for ultrasensitive detection of disease biomarkers. Herein, the hollow double-shell CuCo₂O₄@Cu₂O (HDS-CuCo₂O₄@Cu₂O) heterostructures were conveniently prepared and utilized as an attractive coreaction accelerator to improve the NIR ECL performance of gold nanoclusters (AuNCs) for the first time. Benefiting from perfect-matched lattice spacing, unique Cu₂O nanoparticles (NPs) were formed in situ on the layered-hollow CuCo₂O₄ nanospheres (NSs) to obtain HDS-CuCo₂O₄@Cu₂O heterostructures. The formed heterojunctions supplied shorter charge transfer distance and better interfacial charge transfer efficiency as well as more effective separation performance. Consequently, HDS-CuCo₂O₄@Cu₂O heterostructures as an admirable electroactive substrate could significantly promote the formation of sufficient coreactant intermediate radicals to react with AuNCs cationic radicals, realizing about 3-folds stronger NIR ECL response than that of individual AuNCs. In addition, the AuNCs templated by l-methionine (l-Met) exhibited NIR ECL emission around 830 nm, which could decrease the photochemical damage to even realize a nondestructive detection with improved susceptibility and circumambient adaptability. Subsequently, a well site-oriented fixation strategy utilizing HWRGWVC heptapeptide as the specific antibody immobilizer was introduced to further preserve the bioactivity of antibody on the HDS-CuCo₂O₄@Cu₂O and AuNCs surface along with enhancing the incubation performance markedly. In view of the progressive sensing mechanism, a NIR immunosensor was obtained for the ultrasensitive analysis of CYFRA21-1, which achieved a broad linear ranging from 2 fg/mL to 50 ng/mL and a low limit of detection (LOD) of 0.67 fg/mL (S/N = 3).

Bifunctional Pdots-Based Novel ECL Nanoprobe with Qualitative and Quantitative Dual Signal Amplification Characteristics for Trace Cytokine Analysis

In this work, a novel methodology to design bifunctional ECL-luminophores with self-enhanced and TSA-amplified characteristics was proposed for improving the sensing performance of ECL-immunosensor toward trace cytokine analysis. Thanks to the qualitative- and quantitative- dual signal amplification technique, the as-prepared ECL biosensor demonstrated excellent detection performance. By analyzing the prospective cytokine biomarkers (IL-6), the ECL immunosensor exhibited a broad examination range with quite low detection limit and quite high selectivity, which was far superior to commercial ELISA kits and ever reported works. In particular, the novel ECL nanoprobe developed here could also be applied to monitor other immune toxicities or disease-related cytokines by using the respective antibodies corresponding to these targets. Moreover, the concept and construction strategy of self-amplified ECL-luminophores presented here could be further extended to design a series of Pdots-derived multicolored ECL probes to meet the needs of multipathway detection applications.