NaClO-Generated Iron(IV)oxo and Iron(V)oxo TAMLs in Pure Water

Highly regioselective oxidation of C-H bonds in water using hydrogen peroxide by a cytochrome P450 mimicking iron complex

Cytochrome P450, one of nature's oxidative workhorses, catalyzes the oxidation of C-H bonds in complex biological settings. Extensive research has been conducted over the past five decades to develop a fully functional mimic that activates O2 or H2O2 in water to oxidize strong C-H bonds. We report the first example of a synthetic iron complex that functionally mimics cytochrome P450 in 100% water using H2O2 as the oxidant. This iron complex, in which one methyl group is replaced with a phenyl group in either wing of the macrocycle, oxidized unactivated C-H bonds in small organic molecules with very high selectivity in water (pH 8.5). Several substrates (34 examples) that contained arenes, heteroaromatics, and polar functional groups were oxidized with predictable selectivity and stereoretention with moderate to high yields (50-90%), low catalyst loadings (1-4 mol%) and a small excess of H2O2 (2-3 equiv.) in water. Mechanistic studies indicated the oxoiron(v) to be the active intermediate in water and displayed unprecedented selectivity towards 3° C-H bonds. Under single-turnover conditions, the reactivity of this oxoiron(v) intermediate in water was found to be around 300 fold higher than that in CH3CN, thus implying the role water plays in enzymatic systems.

Enhanced Direct Electron Transfer Mediated Contaminant Degradation by Fe(IV) Using a Carbon Black-Supported Fe(III)-TAML Suspension Electrode System

Iron complexes of tetra-amido macrocyclic ligands (Fe-TAML) are recognized to be effective catalysts for the degradation of a wide range of organic contaminants in homogeneous conditions with the high valent Fe(IV) and Fe(V) species generated on activation of the Fe-TAML complex by hydrogen peroxide (H₂O₂) recognized to be powerful oxidants. Electrochemical activation of Fe-TAML would appear an attractive alternative to H₂O₂ activation, especially if the Fe-TAML complex could be attached to the anode, as this would enable formation of high valent iron species at the anode and, importantly, retention of the valuable Fe-TAML complex within the reaction system. In this work, we affix Fe-TAML to the surface of carbon black particles and apply this "suspension anode" process to oxidize selected target compounds via generation of high valent iron species. We show that the overpotential for Fe(IV) formation is 0.17 V lower than the potential required to generate Fe(IV) electrochemically in homogeneous solution and also show that the stability of the Fe(IV) species is enhanced considerably compared to the homogeneous Fe-TAML case. Application of the carbon black-supported Fe-TAML suspension anode reactor to degradation of oxalate and hydroquinone with an initial pH value of 3 resulted in oxidation rate constants that were up to three times higher than could be achieved by anodic oxidation in the absence of Fe-TAML and at energy consumptions per order of removal substantially lower than could be achieved by alternate technologies.

Cooperative Co-Activation of Water and Hypochlorite by a Non-Heme Diiron(III) Complex

Aqueous solutions of the iron(III) complex of N,N,N'-tris(2-pyridylmethyl)ethylenediamine-N'-acetate (tpena) react with hypochlorite (ClO^-) to produce the reactive high-valent [Fe^IV(O)(tpena)]⁺. Under catalytic conditions, in bicarbonate-buffered media (pH 8) with a set ionic strength (10 mM NaCl), kinetic analysis shows that two equivalents of [Fe^IV(O)(tpena)]⁺ per one ClO^- are produced, with benign chloride ions the only byproduct. An unprecedented supramolecular activation of ClO^- by {(HCO₃)⊂[(tpena)Fe^III(μ-O)Fe^III(Htpena)]}²⁺ is proposed. This mode of activation has great advantage for use in the catalytic oxidation of C-H bonds in water since: (i) the catalyst scaffold is protected from oxidative degradation and (ii) undesirable radical side reactions which produce toxic chlorinated compounds are circumvented by this novel coactivation of water and ClO^-. The unique activation mechanism by the Fe-tpena system makes possible the destruction of organic contaminants as an add-on technology to water disinfection by chlorination, demonstrated here through (i) the catalytic oxidation of micropollutant metaldehyde, and (ii) mineralization of the model substrate formate. The resting-state speciation at pH 3, 5, 7, and 9, as well as the catalytically active iron speciation are characterized with Mössbauer and EPR spectroscopy and supported by DFT calculations. Our study provides fundamentally new insights into the design and activation mode of iron-based catalysts relevant to applications in water remediation.

New Findings of Ferrate(VI) Oxidation Mechanism from Its Degradation of Alkene Imidazole Ionic Liquids

Chemical reactivity, kinetics, degradation pathways and mechanisms, and ecotoxicity of the oxidation of 1-vinyl-3-ethylimidazolium bromide ([VEIm]Br), the most common alternative to organic solvents, by Fe(VI) (HFeO₄^-) were studied by lab experiments and theoretical calculations. Results show that Fe(VI) can efficiently remove VEIm through the dioxygen transfer-hydrolysis mechanism, which has not been reported yet. The reactivity of VEIm toward Fe(VI) mainly depends on the double bonds in the side chain of VEIm. The second-order rate constant for VEIm was 629.45 M^-1 s^-1 at pH 7.0 and 25 °C. Typical water constituents, except for SO₃^2-, Cl^-, and Cu²⁺, had no obvious effects on the oxidation. The oxidation products were determined by high-performance liquid chromatography hybrid quadrupole time-of-flight mass spectrometry, which proves that there were interactions between the oxidation intermediates of the anion and cation parts of [VEIm]Br during the degradation process. The structures of related products and oxidation mechanisms were further rationalized by theoretical calculations. The ecotoxicity of products from the three oxidation pathways all showed a trend of increase after the initial decrease. We hope that the findings of this work can give researchers some new inspirations on Fe(VI) degradation of other alkene-containing contaminants.

Ligand Architecture Perturbation Influences the Reactivity of Nonheme Iron(V)-Oxo Tetraamido Macrocyclic Ligand Complexes: A Combined Experimental and Theoretical Study

Iron(V)-oxo complexes bearing negatively charged tetraamido macrocyclic ligands (TAMLs) have provided excellent opportunities to investigate the chemical properties and the mechanisms of oxidation reactions of mononuclear nonheme iron(V)-oxo intermediates. Herein, we report the differences in chemical properties and reactivities of two iron(V)-oxo TAML complexes differing by modification on the "Head" part of the TAML framework; one has a phenyl group at the "Head" part (1), whereas the other has four methyl groups replacing the phenyl ring (2). The reactivities of 1 and 2 in both C-H bond activation reactions, such as hydrogen atom transfer (HAT) of 1,4-cyclohexadiene, and oxygen atom transfer (OAT) reactions, such as the oxidation of thioanisole and its derivatives, were compared experimentally. Under identical reaction conditions, 1 showed much greater reactivity than 2, such as a 10²-fold decrease in HAT and a 10⁵-fold decrease in OAT by replacing the phenyl group (i.e., 1) with four methyl groups (i.e., 2). Then, density functional theory calculations were performed to rationalize the reactivity differences between 1 and 2. Computations reproduced the experimental findings well and revealed that the replacement of the phenyl group in 1 with four methyl groups in 2 not only increased the steric hindrance but also enlarged the energy gap between the electron-donating orbital and the electron-accepting orbital. These two factors, steric hindrance and the orbital energy gap, resulted in differences in the reduction potentials of 1 and 2 and their reactivities in oxidation reactions.

Effect of Metal Ions on Oxidation of Micropollutants by Ferrate(VI): Enhancing Role of FeIV Species

This paper investigated the oxidation of recalcitrant micropollutants [i.e., atenolol (ATL), flumequine, aspartame, and diatrizoic acid] by combining ferrate(VI) (Fe^VIO₄^2-, Fe^VI) with a series of metal ions [i.e., Fe(III), Ca(II), Al(III), Sc(III), Co(II), and Ni(II)]. An addition of Fe(III) to Fe^VI enhanced the oxidation of micropollutants compared solely to Fe^VI. The enhanced oxidation of studied micropollutants increased with increasing [Fe(III)]/[Fe^VI] to 2.0. The complete conversion of phenyl methyl sulfoxide (PMSO), as a probe agent, to phenyl methyl sulfone (PMSO₂) by the Fe^VI-Fe(III) system suggested that the highly reactive intermediate Fe^IV/Fe^V species causes the increased oxidation of all four micropollutants. A kinetic modeling of the oxidation of ATL demonstrated that the major species causing the increase in ATL removal was Fe^IV, which had an estimated rate constant as (6.3 ± 0.2) × 10⁴ M^-1 s^-1, much higher than that of Fe^VI [(5.0 ± 0.4) × 10^-1 M^-1 s^-1]. Mechanisms of the formed oxidation products of ATL by Fe^IV, which included aromatic and/or benzylic oxidation, are delineated. The presence of natural organic matter significantly inhibited the removal of four pollutants by the Fe^VI-Fe(III) system. The enhanced effect of the Fe^VI-Fe(III) system was also seen in the oxidation of the micropollutants in river water and lake water.

EPR spectroscopy elucidates the electronic structure of [FeV(O)(TAML)] complexes

The complete hyperfine tensor of ¹⁷O of the Fe^V-oxo moeity was probed by ENDOR spectroscopy. The EPR spectroscopic results reported here provide a conclusive experimental basis for elucidating the electronic structure of the Fe^V-oxo complex.

Structural and spectroscopic characterization of an Fe(VI) bis(imido) complex

High-valent iron species are key intermediates in oxidative biological processes, but hexavalent complexes apart from the ferrate ion are exceedingly rare. Here, we report the synthesis and structural and spectroscopic characterization of a stable Fe(VI) complex (3) prepared by facile one-electron oxidation of an Fe(V) bis(imido) (2). Single-crystal x-ray diffraction of 2 and 3 revealed four-coordinate Fe centers with an unusual "seesaw" geometry. ⁵⁷Fe Mössbauer, x-ray photoelectron, x-ray absorption, and electron-nuclear double resonance (ENDOR) spectroscopies, supported by electronic structure calculations, support a low-spin (S = 1/2) d³ Fe(V) configuration in 2 and a diamagnetic (S = 0) d² Fe(VI) configuration in 3 Their shared seesaw geometry is electronically dictated by a balance of Fe-imido σ- and π-bonding interactions.

Enhanced Redox Reactivity of a Nonheme Iron(V)-Oxo Complex Binding Proton

Acid effects on the chemical properties of metal-oxygen intermediates have attracted much attention recently, such as the enhanced reactivity of high-valent metal(IV)-oxo species by binding proton(s) or Lewis acidic metal ion(s) in redox reactions. Herein, we report for the first time the proton effects of an iron(V)-oxo complex bearing a negatively charged tetraamido macrocyclic ligand (TAML) in oxygen atom transfer (OAT) and electron-transfer (ET) reactions. First, we synthesized and characterized a mononuclear nonheme Fe(V)-oxo TAML complex (1) and its protonated iron(V)-oxo complexes binding two and three protons, which are denoted as 2 and 3, respectively. The protons were found to bind to the TAML ligand of the Fe(V)-oxo species based on spectroscopic characterization, such as resonance Raman, extended X-ray absorption fine structure (EXAFS), and electron paramagnetic resonance (EPR) measurements, along with density functional theory (DFT) calculations. The two-protons binding constant of 1 to produce 2 and the third protonation constant of 2 to produce 3 were determined to be 8.0(7) × 10⁸ M^-2 and 10(1) M^-1, respectively. The reactivities of the proton-bound iron(V)-oxo complexes were investigated in OAT and ET reactions, showing a dramatic increase in the rate of sulfoxidation of thioanisole derivatives, such as 10⁷ times increase in reactivity when the oxidation of p-CN-thioanisole by 1 was performed in the presence of HOTf (i.e., 200 mM). The one-electron reduction potential of 2 (E_red vs SCE = 0.97 V) was significantly shifted to the positive direction, compared to that of 1 (E_red vs SCE = 0.33 V). Upon further addition of a proton to a solution of 2, a more positive shift of the E_red value was observed with a slope of 47 mV/log([HOTf]). The sulfoxidation of thioanisole derivatives by 2 was shown to proceed via ET from thioanisoles to 2 or direct OAT from 2 to thioanisoles, depending on the ET driving force.

Fe2+/HClO Reaction Produces FeIVO2+: An Enhanced Advanced Oxidation Process

The reaction between Fe²⁺ and HClO constitutes a promising advanced oxidation process (AOP) for removing pollutants from wastewater, and ^•OH has been considered the dominant reactive oxidant despite limited evidence for this. Herein, we demonstrate that the Fe²⁺/HClO reaction enables the production of Fe^IVO²⁺ rather than ^•OH in acid medium, a finding that is strongly supported by multiple lines of evidence. Both X-ray absorption near-edge structure spectroscopic tests and Mössbauer spectroscopic tests confirmed the appearance of Fe^IVO²⁺ as the reactive intermediate in the reaction between Fe²⁺ and HClO. The determination of Fe^IVO²⁺ generation was also derived from the methyl phenyl sulfoxide (PMSO)-based probe experiments with respect to the formation of PMSO₂ without ^•OH adducts and the density functional theory studies according to the lower energy barrier for producing Fe^IVO²⁺ compared with ^•OH. A dual-anode electrolytic system was established for the in situ generation of Fe²⁺ and HClO that allows the production of Fe^IVO²⁺. The system exhibits an enhanced capacity for oxidizing a model pollutant (e.g., phosphite) from industrial wastewater, making it an attractive and promising AOP for the abatement of aqueous contaminants.

Valence-dependent catalytic activities of iron terpyridine complexes for pollutant degradation

Herein, iron-terpyridine complexes with the iron centers at different initial valence states were utilized as homogeneous catalysts for the degradation of phenol in water. The iron(iii)-terpyridine complex induced the formation of more high-valent iron-oxo centers and hydroxyl radicals than the iron(ii)-terpyridine complex, leading to a higher catalytic activity.

Mechanistic dichotomies in redox reactions of mononuclear metal–oxygen intermediates

This review article focuses on various mechanistic dichotomies in redox reactions of metal–oxygen intermediates with the emphasis on understanding and controlling their redox reactivity from experimental and theoretical points of view.

Water Oxidation Catalysts for Artificial Photosynthesis

Water oxidation is the primary reaction of both natural and artificial photosynthesis. Developing active and robust water oxidation catalysts (WOCs) is the key to constructing efficient artificial photosynthesis systems, but it is still facing enormous challenges in both fundamental and applied aspects. Here, the recent developments in molecular catalysts and heterogeneous nanoparticle catalysts are reviewed with special emphasis on biomimetic catalysts and the integration of WOCs into artificial photosystems. The highly efficient artificial photosynthesis depends largely on active WOCs integrated into light harvesting materials via rational interface engineering based on in-depth understanding of charge dynamics and the reaction mechanism.

Generation and Reactivity of a One-Electron-Oxidized Manganese(V) Imido Complex with a Tetraamido Macrocyclic Ligand

The synthesis and X-ray structure of a new manganese(V) mesitylimido complex with a tetraamido macrocyclic ligand (TAML), [Mn^V (TAML)(N-Mes)]^- (1), are reported. Compound 1 is oxidized by [(p-BrC₆ H₄ )₃ N]^+. [SbCl₆ ]^- and the resulting Mn^VI species readily undergoes H-atom transfer and nitrene transfer reactions.

Preparation and Characterisation of a Bis-μ-Hydroxo-NiIII 2 Complex

Hydroxide-bridged high-valent oxidants have been implicated as the active oxidants in methane monooxygenases and other oxidases that employ bimetallic clusters in their active site. To understand the properties of such species, bis-μ-hydroxo-Ni^II ₂ complex (1) supported by a new dicarboxamidate ligand (N,N'-bis(2,6-dimethyl-phenyl)-2,2-dimethylmalonamide) was prepared. Complex 1 contained a diamond core made up of two Ni^II ions and two bridging hydroxide ligands. Titration of the 1 e^- oxidant (NH₄ )₂ [Ce^IV (NO₃ )₆ ] with 1 at -45 °C showed the formation of the high-valent species 2 and 3, containing Ni^II Ni^III and Ni^III ₂ diamond cores, respectively, maintaining the bis-μ-hydroxide core. Both complexes were characterised using electron paramagnetic resonance, X-ray absorption, and electronic absorption spectroscopies. Density functional theory computations supported the spectroscopic assignments. Oxidation reactivity studies showed that bis-μ-hydroxide-Ni^III ₂ 3 was capable of oxidizing substrates at -45 °C at rates greater than that of the most reactive bis-μ-oxo-Ni^III complexes reported to date.

Oxidation of Pharmaceuticals by Ferrate(VI) in Hydrolyzed Urine: Effects of Major Inorganic Constituents

Destruction of pharmaceuticals excreted in urine can be an efficient approach to eliminate these environmental pollutants. However, urine contains high concentrations of chloride, ammonium, and bicarbonate, which may hinder treatment processes. This study evaluated the application of ferrate(VI) (Fe^VIO₄^2-, Fe(VI)) to oxidize pharmaceuticals (carbamazepine (CBZ), naproxen (NAP), trimethoprim (TMP), and sulfonamide antibiotics (SAs)) in synthetic hydrolyzed human urine and uncovered new effects from urine's major inorganic constituents. Chloride slightly decreased pharmaceuticals' removal rate by Fe(VI) due to the ionic strength effect. Ammonium (0.5 M) in undiluted hydrolyzed urine posed a strong scavenging effect, but lower concentrations (≤0.25 M) of ammonium enhanced the pharmaceuticals' degradation by 300 μM Fe(VI), likely due to the reactive ammonium complex form of Fe(V)/Fe(IV). For the first time, bicarbonate was found to significantly promote the oxidation of aniline-containing SAs by Fe(VI) and alter the reaction stoichiometry of Fe(VI) and SA from 4:1 to 3:1. In depth investigation indicated that bicarbonate not only changed the Fe(VI)/SA complexation ratio from 1:2 to 1:1 but provided a stabilizing effect for Fe(V) intermediate formed in situ, enabling its degradation of SAs. Overall, the results of this study suggested that Fe(VI) is a promising oxidant for the removal of pharmaceuticals in hydrolyzed urine.

Characterized cis-FeV(O)(OH) intermediate mimics enzymatic oxidations in the gas phase

Fe^V(O)(OH) species have long been proposed to play a key role in a wide range of biomimetic and enzymatic oxidations, including as intermediates in arene dihydroxylation catalyzed by Rieske oxygenases. However, the inability to accumulate these intermediates in solution has thus far prevented their spectroscopic and chemical characterization. Thus, we use gas-phase ion spectroscopy and reactivity analysis to characterize the highly reactive [Fe^V(O)(OH)(^5tips3tpa)]²⁺ (3²⁺) complex. The results show that 3²⁺ hydroxylates C–H bonds via a rebound mechanism involving two different ligands at the Fe center and dihydroxylates olefins and arenes. Hence, this study provides a direct evidence of Fe^V(O)(OH) species in non-heme iron catalysis. Furthermore, the reactivity of 3²⁺ accounts for the unique behavior of Rieske oxygenases. The use of gas-phase ion characterization allows us to address issues related to highly reactive intermediates that other methods are unable to solve in the context of catalysis and enzymology.

Fe^V(O)(OH) species have long been thought to play a role in a range of enzymatic oxidations, but their characterization has remained elusive. Here, using gas-phase ion spectroscopy, the authors characterize an Fe^V(O)(OH) species and find that its reactivity mimics that of Rieske oxygenases.

Electron Paramagnetic Resonance Signature of Tetragonal Low Spin Iron(V)-Nitrido and -Oxo Complexes Derived from the Electronic Structure Analysis of Heme and Non-Heme Archetypes

Iron(V)-nitrido and -oxo complexes have been proposed as key intermediates in a diverse array of chemical transformations. Herein we present a detailed electronic-structure analysis of [Fe^V(N)(TPP)] (1, TPP^2– = tetraphenylporphyrinato), and [Fe^V(N)(cyclam-ac)]⁺ (2, cyclam-ac = 1,4,8,11-tetraazacyclotetradecane-1-acetato) using electron paramagnetic resonance (EPR) and ⁵⁷Fe Mössbauer spectroscopy coupled with wave function based complete active-space self-consistent field (CASSCF) calculations. The findings were compared with all other well-characterized genuine iron(V)-nitrido and -oxo complexes, [Fe^V(N)(MePy₂tacn)](PF₆)₂ (3, MePy₂tacn = methyl-N′,N″-bis(2-picolyl)-1,4,7-triazacyclononane), [Fe^V(N){PhB(t-BuIm)₃}]⁺ (4, PhB(^tBuIm)₃^– = phenyltris(3-tert-butylimidazol-2-ylidene)borate), and [Fe^V(O)(TAML)]⁻ (5, TAML^4– = tetraamido macrocyclic ligand). Our results revealed that complex 1 is an authenticated iron(V)-nitrido species and contrasts with its oxo congener, compound I, which contains a ferryl unit interacting with a porphyrin radical. More importantly, tetragonal iron(V)-nitrido and -oxo complexes 1–3 and 5 all possess an orbitally nearly doubly degenerate S = 1/2 ground state. Consequently, analogous near-axial EPR spectra with g_|| < g_⊥ ≤ 2 were measured for them, and their g_|| and g_⊥ values were found to obey a simple relation of g_⊥² + (2 – g_∥)² = 4. However, the bonding situation for trigonal iron(V)-nitrido complex 4 is completely different as evidenced by its distinct EPR spectrum with g_|| < 2 < g_⊥. Further in-depth analyses suggested that tetragonal low spin iron(V)-nitrido and -oxo complexes feature electronic structures akin to those found for complexes 1–3 and 5. Therefore, the characteristic EPR signals determined for 1–3 and 5 can be used as a spectroscopic marker to identify such highly reactive intermediates in catalytic processes.

A Synthetically Generated LFeIVOH n Complex

High-valent Fe-OH species are important intermediates in hydroxylation chemistry. Such complexes have been implicated in mechanisms of oxygen-activating enzymes and have thus far been observed in Compound II of sulfur-ligated heme enzymes like cytochrome P450. Attempts to synthetically model such species have thus far seen relatively little success. Here, the first synthetic Fe^IVOH _n complex has been generated and spectroscopically characterized as either [LFe^IVOH]^- or [LFe^IVOH₂]⁰, where H₄L = Me₄C₂(NHCOCMe₂NHCO)₂CMe₂ is a variant of a tetra-amido macrocyclic ligand (TAML). The steric bulk provided by the replacement of the aryl group with the -CMe₂CMe₂- unit in this TAML variant prevents dimerization in all oxidation states over a wide pH range, thus allowing the generation of Fe^IVOH _n in near quantitative yield from oxidation of the [LFe^IIIOH₂]^- precursor.

A putative heme manganese(v)-oxo species in the C–H activation and epoxidation reactions in an aqueous buffer

Synthesis and reactivity studies of manganese(v)-oxo species in the C–H activation of alkyl hydrocarbons and epoxidation of cyclohexene in aqueous conditions are investigated.

Accelerated Oxidation of Organic Contaminants by Ferrate(VI): The Overlooked Role of Reducing Additives

This paper presents an accelerated ferrate(VI) (Fe^VIO₄^2-, Fe^VI) oxidation of contaminants in 30 s by adding one-electron and two-electron transfer reductants (R₍₁₎ and R₍₂₎). An addition of R₍₂₎ (e.g., NH₂OH, As^III, Se^IV, P^III, and NO₂^-, and S₂O₃^2-) results in Fe^IV initially, while Fe^V is generated with the addition of R₍₁₎ (e.g., SO₃^2-). R₍₂₎ additives, except S₂O₃^2-, show the enhanced oxidation of 20-40% of target contaminant, trimethoprim (TMP). Comparatively, enhanced oxidation of TMP was up to 100% with the addition of R₍₁₎ to Fe^VI. Interestingly, addition of S₂O₃^2- (i.e., R₍₂₎) also achieves the enhanced oxidation to 100%. Removal efficiency of TMP depends on the molar ratio ([R₍₁₎]:[Fe^VI] or [R₍₂₎]:[Fe^VI]). Most of the reductants have the highest removal at molar ratio of ∼0.125. A Fe^VI-S₂O₃^2- system also oxidizes rapidly a wide range of organic contaminants (pharmaceuticals, pesticides, artificial sweetener, and X-ray contrast media) in water and real water matrices. Fe^V and Fe^IV as the oxidative species in the Fe^VI-S₂O₃^2--contaminant system are elucidated by determining removal of contaminants in oxygenated and deoxygenated water, applying probing agent, and identifying oxidized products of TMP and sulfadimethoxine (SDM) by Fe^VI-S₂O₃^2- systems. Significantly, elimination of SO₂ from sulfonamide (i.e., SDM) is observed for the first time.

Spectroscopic and DFT Characterization of a Highly Reactive Nonheme FeV-Oxo Intermediate

The reaction of [(PyNMe₃)Fe^II(CF₃SO₃)₂], 1, with excess peracetic acid at -40 °C generates a highly reactive intermediate, 2b(PAA), that has the fastest rate to date for oxidizing cyclohexane by a nonheme iron species. It exhibits an intense 490 nm chromophore associated with an S = 1/2 EPR signal having g-values at 2.07, 2.01, and 1.94. This species was shown to be in a fast equilibrium with a second S = 1/2 species, 2a(PAA), assigned to a low-spin acylperoxoiron(III) center. Unfortunately, contaminants accompanying the 2(PAA) samples prevented determination of the iron oxidation state by Mössbauer spectroscopy. Use of MeO-PyNMe₃ (an electron-enriched version of PyNMe₃) and cyclohexyl peroxycarboxylic acid as oxidant affords intermediate 3b(CPCA) with a Mössbauer isomer shift δ = -0.08 mm/s that indicates an iron(V) oxidation state. Analysis of the Mössbauer and EPR spectra, combined with DFT studies, demonstrates that the electronic ground state of 3b(CPCA) is best described as a quantum mechanical mixture of [(MeO-PyNMe₃)Fe^V(O)(OC(O)R)]²⁺ (∼75%) with some Fe^IV(O)(^•OC(O)R) and Fe^III(OOC(O)R) character. DFT studies of 3b(CPCA) reveal that the unbound oxygen of the carboxylate ligand, O2, is only 2.04 Å away from the oxo group, O1, corresponding to a Wiberg bond order for the O1-O2 bond of 0.35. This unusual geometry facilitates reversible O1-O2 bond formation and cleavage and accounts for the high reactivity of the intermediate when compared to the rates of hydrogen atom transfer and oxygen atom transfer reactions of Fe^III(OC(O)R) ferric acyl peroxides and Fe^IV(O) complexes. The interaction of O2 with O1 leads to a significant downshift of the Fe-O1 Raman frequency (815 cm^-1) relative to the 903 cm^-1 value predicted for the hypothetical [(MeO-PyNMe₃)Fe^V(O)(NCMe)]³⁺ complex.

A Mononuclear Nonheme Iron(V)-Imido Complex

Mononuclear nonheme iron(V)-oxo complexes have been reported previously. Herein, we report the first example of a mononuclear nonheme iron(V)-imido complex bearing a tetraamido macrocyclic ligand (TAML), [(TAML)FeV(NTs)]- (1). The spectroscopic characterization of 1 revealed an S = 1/2 Fe(V) oxidation state, an Fe-N bond length of 1.65(4) Å, and an Fe-N vibration at 817 cm-1. The reactivity of 1 was demonstrated in C-H bond functionalization and nitrene transfer reactions.

Targeting of High-Valent Iron-TAML Activators at Hydrocarbons and Beyond

TAML activators of peroxides are iron(III) complexes. The ligation by four deprotonated amide nitrogens in macrocyclic motifs is the signature of TAMLs where the macrocyclic structures vary considerably. TAML activators are exceptional functional replicas of the peroxidases and cytochrome P450 oxidizing enzymes. In water, they catalyze peroxide oxidation of a broad spectrum of compounds, many of which are micropollutants, compounds that produce undesired effects at low concentrations-as with the enzymes, peroxide is typically activated with near-quantitative efficiency. In nonaqueous solvents such as organic nitriles, the prototype TAML activator gave the structurally authenticated reactive iron(V)oxo units (Fe^VO), wherein the iron atom is two oxidation equivalents above the Fe^III resting state. The iron(V) state can be achieved through the intermediacy of iron(IV) species, which are usually μ-oxo-bridged dimers (Fe^IVFe^IV), and this allows for the reactivity of this potent reactive intermediate to be studied in stoichiometric processes. The present review is primarily focused at the mechanistic features of the oxidation by Fe^VO of hydrocarbons including cyclohexane. The main topic is preceded by a description of mechanisms of oxidation of thioanisoles by Fe^VO, because the associated studies provide valuable insight into the ability of Fe^VO to oxidize organic molecules. The review is opened by a summary of the interconversions between Fe^III, Fe^IVFe^IV, and Fe^VO species, since this information is crucial for interpreting the kinetic data. The highest reactivity in both reaction classes described belongs to Fe^VO. The resting state Fe^III is unreactive oxidatively. Intermediate reactivity is typically found for Fe^IVFe^IV; therefore, kinetic features for these species in interchange and oxidation processes are also reviewed. Examples of using TAML activators for C-H bond cleavage applied to fine organic synthesis conclude the review.

Dioxygen activation by nonheme iron enzymes with the 2-His-1-carboxylate facial triad that generate high-valent oxoiron oxidants

The 2-His-1-carboxylate facial triad is a widely used scaffold to bind the iron center in mononuclear nonheme iron enzymes for activating dioxygen in a variety of oxidative transformations of metabolic significance. Since the 1990s, over a hundred different iron enzymes have been identified to use this platform. This structural motif consists of two histidines and the side chain carboxylate of an aspartate or a glutamate arranged in a facial array that binds iron(II) at the active site. This triad occupies one face of an iron-centered octahedron and makes the opposite face available for the coordination of O₂ and, in many cases, substrate, allowing the tailoring of the iron-dioxygen chemistry to carry out a plethora of diverse reactions. Activated dioxygen-derived species involved in the enzyme mechanisms include iron(III)-superoxo, iron(III)-peroxo, and high-valent iron(IV)-oxo intermediates. In this article, we highlight the major crystallographic, spectroscopic, and mechanistic advances of the past 20 years that have significantly enhanced our understanding of the mechanisms of O₂ activation and the key roles played by iron-based oxidants.

A "Beheaded" TAML Activator: A Compromised Catalyst that Emphasizes the Linearity between Catalytic Activity and pKa

Studies of the new tetra-amido macrocyclic ligand (TAML) activator [Fe^III{(Me₂CNCOCMe₂NCO)₂CMe₂}OH₂]^- (4) in water in the pH range of 2-13 suggest its pseudo-octahedral geometry with two nonequivalent axial H₂O ligands and revealed (i) the anticipated basic drift of the first pK_a of water to 11.38 due to four electron-donating methyl groups alongside (ii) its counterintuitive enhanced resistance to acid-induced iron(III) ejection from the macrocycle. The catalytic activity of 4 in the oxidation of Orange II (S) by H₂O₂ in the pH range of 7-12 is significantly lower than that of previously reported TAML activators, though it follows the common rate law (v/[Fe^III] = k_Ik_II[H₂O₂][S]/(k_I[H₂O₂] + k_II[S]) and typical pH profiles for k_I and k_II. At pH 7 and 25 °C the rate constants k_I and k_II equal 0.63 ± 0.02 and 1.19 ± 0.03 M^-1 s^-1, respectively. With these new values for pK_a, k_I and k_II establishing new high and low limits, respectively, the rate constants k_I and k_II were correlated with pK_a values of all TAML activators. The relations log k = log k⁰ + α × pK_a were established with log k⁰ = 13 ± 2 and 20 ± 4 and α = -1.1 ± 0.2 and -1.8 ± 0.4 for k_I and k_II, respectively. Thus, the reactivity of TAML activators across four generations of catalysts is predictable through their pK_a values.