Self-Assembled Protein-Aromatic Foldamer Complexes with 2:3 and 2:2:1 Stoichiometries

Supramolecular Synthons in Protein-Ligand Frameworks

Supramolecular synthons, defined as reproducible intermolecular structural units, have greatly aided small molecule crystal engineering. In this paper, we propose that supramolecular synthons guide ligand-mediated protein crystallization. The protein RSL and the macrocycle sulfonato-calix[8]arene cocrystallize in at least four ways. One of these cocrystals is a highly porous cube comprising protein nodes connected by calixarene dimers. We show that mutating an aspartic acid to an asparagine results in two new cubic assemblies that depend also on the crystallization method. One of the new cubic arrangements is mediated by calixarene trimers and has a ∼30% increased cell volume relative to the original crystal with calixarene dimers. Crystals of the sulfonato-calix[8]arene sodium salt were obtained from buffered conditions similar to those used to grow the protein-calix[8]arene cocrystals. X-ray analysis reveals a coordination polymer of the anionic calix[8]arene and sodium cation in which the macrocycle is arranged as staggered stacks of the pleated loop conformation. Remarkably, the calixarene packing arrangement is the same in the simple salt as in the protein cocrystal. With the pleated loop conformation, the calixarene presents an extended surface for binding other calixarenes (oligomerization) as well as binding to a protein patch (biomolecular complexation). Small-angle X-ray scattering data suggest pH-dependent calixarene assembly in solution. Therefore, the calix[8]arene-calix[8]arene structural unit may be regarded as a supramolecular synthon that directs at least two types of protein assembly, suggesting applications in protein crystal engineering.

Display Selection of a Hybrid Foldamer-Peptide Macrocycle

Expanding the chemical diversity of peptide macrocycle libraries for display selection is desirable to improve their potential to bind biomolecular targets. We now have implemented a considerable expansion through a large aromatic helical foldamer inclusion. A foldamer was first identified that undergoes flexizyme-mediated tRNA acylation and that is capable of initiating ribosomal translation with yields sufficiently high to perform an mRNA display selection of macrocyclic foldamer-peptide hybrids. A hybrid macrocyclic nanomolar binder to the C-lobe of the E6AP HECT domain was selected that showed a highly converged peptide sequence. A crystal structure and molecular dynamics simulations revealed that both the peptide and foldamer are helical in an intriguing reciprocal stapling fashion. The strong residue convergence could be rationalized based on their involvement in specific interactions with the target protein. The foldamer stabilizes the peptide helix through stapling and through contacts with key residues. These results altogether represent a significant extension of the chemical space amenable to display selection and highlight possible benefits of inserting an aromatic foldamer into a peptide macrocycle for the purpose of protein recognition.

Tweezer-type binding cavity formed by the helical folding of a carbazole-pyridine oligomer

We have synthesised a new aromatic foldamer based on the carbazole-pyridine oligomers that adopt helical conformations via dipole-dipole interactions and π-stacking between two ethynyl bond-linked monomers. This foldamer scaffold has been further modified into a synthetic receptor with a tweezer-type binding cavity outside the helical backbone upon folding, in contrast to most aromatic foldamers with internal binding cavities. The tweezer-type cavity is composed of two parallel pyrenyl planes, allowing for the intercalation of a naphthalenediimide guest via π-stacking and CH⋯O interactions, as demonstrated using its ¹H NMR spectra and X-ray crystal structure.

Natural and Synthetic Oligoarylamides: Privileged Structures for Medical Applications

The term "privileged structure" refers to a single molecular substructure or scaffold that can serve as a starting point for high-affinity ligands for more than one receptor type. In this report, a hitherto overlooked group of privileged substructures is addressed, namely aromatic oligoamides, for which there are natural models in the form of cystobactamids, albicidin, distamycin A, netropsin, and others. The aromatic and heteroaromatic core, together with a flexible selection of substituents, form conformationally well-defined scaffolds capable of specifically binding to conformationally well-defined regions of biomacromolecules such as helices in proteins or DNA often by acting as helices mimics themselves. As such, these aromatic oligoamides have already been employed to inhibit protein-protein and nucleic acid-protein interactions. This article is the first to bring together the scattered knowledge about aromatic oligoamides in connection with biomedical applications.

Oligo-Quinolylene-Vinylene Foldamers

Quinoline based aromatic amide foldamers are known to adopt stable folded conformations. We have developed a synthetic approach to produce similar oligomers where all amide bonds, or part of them, have been replaced by an isosteric vinylene group. The results of solution and solid state structural studies show that oligomers exclusively containing vinylene linkages are not well folded, and adopt predominantly flat conformations. In contrast, a vinylene segment flanked by helical oligoamides also folds in a helix, albeit with a slightly lower curvature. The presence of vinylene functions also result in an extension of π-conjugation across the oligomer that may change charge transport properties. Altogether, these results pave the way to foldamers in which both structural control and specific electronic properties may be engineered.

Tuning Protein Frameworks via Auxiliary Supramolecular Interactions

Protein crystals with their precise, periodic array of functional building blocks have potential applications in biomaterials, sensing, and catalysis. This paper describes how a highly porous crystalline framework of a cationic redox protein and an anionic macrocycle can be modulated by a small cationic effector. Ternary composites of protein (∼13 kDa), calix[8]arene (∼1.5 kDa), and effector (∼0.2 kDa) formed distinct crystalline architectures, dependent on the effector concentration and the crystallization technique. A combination of X-ray crystallography and density functional theory (DFT) calculations was used to decipher the framework variations, which appear to be dependent on a calixarene conformation change mediated by the effector. This "switch" calixarene was observed in three states, each of which is associated with a different interaction network. Two structures obtained by co-crystallization with the effector contained an additional protein "pillar", resulting in framework duplication and decreased porosity. These results suggest how protein assembly can be engineered by supramolecular host-guest interactions.

Structure Elucidation of Helical Aromatic Foldamer-Protein Complexes with Large Contact Surface Areas

The development of large synthetic ligands could be useful to target the sizeable surface areas involved in protein-protein interactions. Herein, we present long helical aromatic oligoamide foldamers bearing proteinogenic side chains that cover up to 450 Ų of the human carbonic anhydrase II (HCA) surface. The foldamers are composed of aminoquinolinecarboxylic acids bearing proteinogenic side chains and of more flexible aminomethyl-pyridinecarboxylic acids that enhance helix handedness dynamics. Crystal structures of HCA-foldamer complexes were obtained with a 9- and a 14-mer both showing extensive protein-foldamer hydrophobic contacts. In addition, foldamer-foldamer interactions seem to be prevalent in the crystal packing, leading to the peculiar formation of an HCA superhelix wound around a rod of stacked foldamers. Solution studies confirm the positioning of the foldamer at the protein surface as well as a dimerization of the complexes.

Assessing Interactions between Helical Aromatic Oligoamide Foldamers and Protein Surfaces: A Tethering Approach

Helically folded aromatic foldamers may constitute suitable candidates for the ab initio design of ligands for protein surfaces. As preliminary steps toward the exploration of this hypothesis, a tethering approach was developed to detect interactions between a protein and a foldamer by confining the former at the surface of the latter. Cysteine mutants of two therapeutically relevant enzymes, CypA and IL4, were produced. Two series of ten foldamers were synthesized bearing different proteinogenic side chains and either a long or a short linker functionalized with an activated disulfide. Disulfide exchange between the mutated cysteines and the activated disulfides yielded 20 foldamer-IL4 and 20 foldamer-CypA adducts. Effectiveness of the reaction was demonstrated by LC-MS, by MS analysis after proteolytic digestion, and by 2D NMR. Circular dichroism then revealed diastereoselective interactions between the proteins and the foldamers confined at their surface which resulted in a preferred handedness of the foldamer helix. Helix sense bias occurred sometimes with both the short and the long linkers and sometimes with only one of them. In a few cases, helix handedness preference is found to be close to quantitative. These cases constitute valid candidates for structural elucidation of the interactions involved.

Crystal structure of a protein–aromatic foldamer composite: macromolecular chiral resolution

A protein–foldamer crystal structure illustrates protein assembly by a sulfonated aromatic oligoamide, and chiral resolution of the foldamer helix handedness.

Visible light-promoted CO2 fixation with imines to synthesize diaryl α-amino acids

Light-mediated transformations with CO₂ have recently attracted great attention, with the focus on CO₂ incorporation into C–C double and triple bonds, organohalides and amines. Herein is demonstrated visible light -mediated umpolung imine reactivity capable of engaging CO₂ to afford α-amino acid derivatives. By employing benzophenone ketimine derivatives, CO₂ fixation by hydrocarboxylation of C=N double bonds is achieved. Good to excellent yields of a broad range of α,α–disubstituted α-amino acid derivatives are obtained under mild conditions (rt, atmospheric pressure of CO₂, visible light). A procedure that avoids tedious chromatographic purification and uses sustainable sunlight is developed to highlight the simplicity of this method.

Fixation of CO₂ in organic molecules is an area of great interest due to the implications in sustainable chemistry. Here, the authors show a visible light-mediated hydrocarboxylation of ketimines with atmospheric CO₂ to afford a number of α,α–diaryl α-amino acid derivatives.

Intramolecular Natural Energy Decomposition Analysis: Applications to the Rational Design of Foldamers

We describe an intramolecular version of the natural energy decomposition analysis (NEDA), with the aim of evaluating interactions between molecular fragments across covalent bonds. The electronic energy in intramolecular natural energy decomposition analysis (INEDA) is divided into electrical, core, and charge transfer components. The INEDA method describes the fragments using the nonfragmented electronic density, and, therefore, there are no limitations in how to choose the boundary orbital. We used INEDA to evaluate the interaction energies that give origin to barriers of rotation around C_amide C_aromatic (C_am C_ar ) and N_amide C_aromtaic (N_am C_ar ) bonds in arylamide-foldamer building blocks. We found that differences of barrier height between models with different ortho-aryl substituents stem from charge transfer and core interactions. In three-center hydrogen-bond (H-bond) models with an NH proton donor H-bound to two electronegative ortho-aryl substituents, the interaction energy of the three-center system is larger than in either of the two-center H-bond subsystem alone, indicating an increase of overall rigidity. The combination of INEDA and NEDA allows the evaluation of intermolecular and intramolecular interactions using a consistent theoretical framework. © 2018 Wiley Periodicals, Inc.

Protein Recognition by Functionalized Sulfonatocalix[4]arenes

The interactions of two mono-functionalized sulfonatocalix[4]arenes with cytochrome c were investigated by structural and thermodynamic methods. The replacement of a single sulfonate with either a bromo or a phenyl substituent resulted in altered recognition of cytochrome c as evidenced by X-ray crystallography. The bromo-substituted ligand yielded a new binding mode in which a self-encapsulated calixarene dimer contributed to crystal packing. This ligand also formed a weak halogen bond with the protein. The phenyl-substituted ligand was bound to Lys4 of cytochrome c, in a 1.7 Å resolution crystal structure. A dimeric packing arrangement mediated by ligand-ligand contacts in the crystal suggested a possible assembly mechanism. The different protein recognition properties of these calixarenes are discussed.

Supramolecular Chemistry Targeting Proteins

The specific recognition of protein surface elements is a fundamental challenge in the life sciences. New developments in this field will form the basis of advanced therapeutic approaches and lead to applications such as sensors, affinity tags, immobilization techniques, and protein-based materials. Synthetic supramolecular molecules and materials are creating new opportunities for protein recognition that are orthogonal to classical small molecule and protein-based approaches. As outlined here, their unique molecular features enable the recognition of amino acids, peptides, and even whole protein surfaces, which can be applied to the modulation and assembly of proteins. We believe that structural insights into these processes are of great value for the further development of this field and have therefore focused this Perspective on contributions that provide such structural data.

Optimizing side chains for crystal growth from water: a case study of aromatic amide foldamers

The growth of crystals of aromatic compounds from water much depends on the nature of the water solubilizing functions that they carry. Rationalizing crystallization from water, and structure elucidation, of aromatic molecular and supramolecular systems is of general value across various fields of chemistry. Taking helical aromatic foldamers as a test case, we have validated several short polar side chains as efficient substituents to provide both solubility in, and crystal growth ability from, water. New 8-amino-2-quinolinecarboxylic acids bearing charged or neutral aminomethyl, carboxymethyl, sulfonic acid, or bis(hydroxymethyl)-methoxy side chains in position 4 or 5, were prepared on a multi gram scale. Fmoc protection of the main chain amine and suitable protections of the side chains ensured compatibility with solid phase synthesis. One tetrameric and five octameric oligoamides displaying these side chains were synthesized and shown to be soluble in water. In all cases but one, crystals were obtained using the hanging drop method, thus validating the initial design principle to combine polarity and rigidity. The only case that resisted crystallization appeared to be due to exceedingly high water solubility endowed by eight sulfonic acid functions. The neutral side chain did provide crystal growth ability from water but contributed poorly to solubility.