Terminal Functionalization with a Triptycene Motif That Dramatically Changes the Structural and Physical Properties of an Amorphous Polymer

Novel Chain-End Modification of Polymer Iodides via Reversible Complexation-Mediated Polymerization with Functionalized Radical Generation Agents

The modification of polymer chain ends is important in order to produce highly functional polymers. A novel chain-end modification of polymer iodides (Polymer-I) via reversible complexation-mediated polymerization (RCMP) with different functionalized radical generation agents, such as azo compounds and organic peroxides, was developed. This reaction was comprehensively studied for three different polymers, i.e., poly (methyl methacrylate), polystyrene and poly (n-butyl acrylate) (PBA), two different functional azo compounds with aliphatic alkyl and carboxy groups, three different functional diacyl peroxides with aliphatic alkyl, aromatic, and carboxy groups, and one peroxydicarbonate with an aliphatic alkyl group. The reaction mechanism was probed using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). The combination of PBA-I, iodine abstraction catalyst and different functional diacyl peroxides enabled higher chain-end modification to desired moieties from the diacyl peroxide. The dominant key factors for efficiency in this chain-end modification mechanism were the combination rate constant and the amount of radicals generated per unit of time.

End-modification of poly(ether-carbonate) copolymer by adamantane cages: An effective approach for improving the selectivity of gas chromatographic stationary phases

This work reports the investigation of a new poly(propylene-carbonate) copolymer terminated by the adamantane cages (APPC) as the stationary phase for gas chromatographic (GC) analyses. In GC, the selectivity of a stationary phase is the key factor that governs the column separation performance for analytes, particularly those of high similarity in structures and properties. As such, we employed more than a dozen of isomer mixtures of separation difficulty for investigating the separation performance of the APPC column, involving the isomers of alkanes, alkylbenzenes, halobenzenes phenols and anilines. Meanwhile, the column coated with poly(propylene carbonate) diol (PPCD) differing from APPC only in their terminal groups and two commercial columns coated with polyethylene glycol (PEG) and polysiloxane, respectively, were used as the reference columns. The separation results evidenced the distinctly advantageous performance of the APPC column over the reference columns. Moreover, the APPC column showed excellent repeatability and reproducibility with the relative standard deviation (RSD) values over the range of 0.01%-0.04% for run-to-run, 0.15%-0.28% for day-to-day and 3.4%-3.9% for column-to-column (n = 4). Its application to GC-MS analysis of the verbena essential oil demonstrated its separation advantages for a wide range of components in practical samples. Up to date, the adamantyl-terminated poly(ether-carbonate) copolymers have not been reported in any fields. Its high-resolution performance demonstrates the feasibility of adamantyl-terminated block copolymers as highly selective stationary phases for GC analyses, which offers a vast room for fundamental researches and applications.

Highly Ordered Supramolecular Materials of Phase-Separated Block Molecules for Long-Range Exciton Transport

Efficient energy transport over long distances is essential for optoelectronic and light-harvesting devices. Although self-assembled nanofibers of organic molecules are shown to exhibit long exciton diffusion lengths, alignment of these nanofibers into films with large, organized domains with similar properties remains a challenge. Here, it is shown how the functionalization of C₃ -symmetric carbonyl-bridged triarylamine trisamide (CBT) with oligodimethylsiloxane (oDMS) side chains of discrete length leads to fully covered surfaces with aligned domains up to 125 × 70 µm² in which long-range exciton transport takes place. The nanoscale morphology within the domains consists of highly ordered nanofibers with discrete intercolumnar spacings within a soft amorphous oDMS matrix. The oDMS prevents bundling of the CBT fibers, reducing the number of defects within the CBT columns. As a result, the columns have a high degree of coherence, leading to exciton diffusion lengths of a few hundred nanometers with exciton diffusivities (≈0.05 cm² s^-1 ) that are comparable to those of a crystalline tetracene. These findings represent the next step toward fully covered surfaces of highly aligned nanofibers through functionalization with oDMS.

Overcoming the entropy of polymer chains by making a plane with terminal groups: a thermoplastic PDMS with a long-range 1D structural order

Due to its unique physical and chemical properties, polydimethylsiloxane (PDMS) is widely used in many applications, in which covalent cross-linking is commonly used to cure the fluidic polymer. The formation of a non-covalent network achieved through the incorporation of terminal groups that exhibit strong intermolecular interactions has also been reported to improve the mechanical properties of PDMS. Through the design of a terminal group capable of two-dimensional (2D) assembly, rather than the generally used multiple hydrogen bonding motifs, we have recently demonstrated an approach for inducing long-range structural ordering of PDMS, resulting in a dramatic change in the polymer from a fluid to a viscous solid. Here we present an even more surprising terminal-group effect: simply replacing a hydrogen with a methoxy group leads to extraordinary enhancement of the mechanical properties, giving rise to a thermoplastic PDMS material without covalent cross-linking. This finding would update the general notion that less polar and smaller terminal groups barely affect polymer properties. Based on a detailed study of the thermal, structural, morphological and rheological properties of the terminal-functionalized PDMS, we revealed that 2D assembly of the terminal groups results in networks of PDMS chains, which are arranged as domains with long-range one-dimensional (1D) periodic order, thereby increasing the storage modulus of the PDMS to exceed its loss modulus. Upon heating, the 1D periodic order is lost at around 120 °C, while the 2D assembly is maintained up to ∼160 °C. The 2D and 1D structures are recovered in sequence upon cooling. Due to the thermally reversible, stepwise structural disruption/formation as well as the lack of covalent cross-linking, the terminal-functionalized PDMS shows thermoplastic behavior and self-healing properties. The terminal group presented herein, which can form a 'plane', might also drive other polymers to assemble into a periodically ordered network structure, thereby allowing for significant modulation of their mechanical properties.

Design, Synthesis, and Anticancer Activity of Triptycene-Peptide Hybrids that Induce Paraptotic Cell Death in Cancer Cells

We report on the design and synthesis of triptycene-peptide hybrids (TPHs), 5, syn-6, and anti-6, which are conjugates of a triptycene core unit with two or three cationic KKKGG peptides (K: lysine and G: glycine) through a C₈ alkyl chain. It was discovered that syn-6 and anti-6 induce paraptosis, a type of programmed cell death (PCD), in Jurkat cells (leukemia T-lymphocytes). Mechanistic studies indicate that these TPHs induce the transfer of Ca²⁺ from the endoplasmic reticulum (ER) to mitochondria, a loss of mitochondrial membrane potential (ΔΨ_m), tethering of the ER and mitochondria, and cytoplasmic vacuolization in the paraptosis processes.

Bottom-up supramolecular assembly in two dimensions

The self-assembly of molecules in two dimensions (2D) is gathering attention from all disciplines across the chemical sciences. Attracted by the interesting properties of two-dimensional inorganic analogues, monomers of different chemical natures are being explored for the assembly of dynamic 2D systems. Although many important discoveries have been already achieved, great challenges are still to be addressed in this field. Hierarchical multicomponent assembly, directional non-covalent growth and internal structural control are a just a few of the examples that will be discussed in this perspective about the exciting present and the bright future of two-dimensional supramolecular assemblies.

The self-assembly of molecules in two dimensions (2D) is gathering attention from all disciplines across the chemical sciences. This perspective discusses the main strategies to direct the supramolecular self-assembly of organic monomers in 2D.

Introduction of Triptycene with a Particular Substitution Pattern into Polymer Chains Can Dramatically Improve the Structural and Rheological Properties

Although a large number of polymers that contain triptycene units in the main chains have been developed, no polymer design using 1,8-substituted triptycene has been reported to date. In this study, we investigated the properties of linear homo- and copolymers obtained by ring-opening polymerization of a triptycene monomer bearing a macrocyclic olefin linked at its 1,8-position and its copolymerization with cyclooctene, respectively. We found that the introduction of triptycene with this substitution pattern leads to nanoscale molecular ordering, thereby greatly improving the physical properties of the polymers. The key to this remarkable behavior of 1,8-substituted triptycene-containing polymers is the formation of a particular two-dimensional assembly of the triptycene units by nested hexagonal packing, which aligns one-dimensionally while folding the polymer chains into a well-defined layered structure. The polymer design using 1,8-substituted triptycene can be applied to other polymers, unless their main chain contains functional groups capable of a strong intermolecular interaction such as hydrogen bonding.

Synthesis and Characterization of Cationic Dendrimer-PDMS Hybrids

A modular strategy for the synthesis of dendron-linear polymer hybrids comprised of a flexible polydimethylsiloxane (PDMS) midblock with cationic 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) dendron end groups is developed. The invention of a scalable methodology to access quaternary ammonium carboxylate building blocks and their direct use in esterification chemistry enables rapid access to cationic bis-MPA dendrons. The convergent click coupling of highly charged dendrons to hydrophobic PDMS chain-ends gives a 12-membered family of hybrids that are comprised of different dendron generations (G1-3) and quaternary ammonium alkyl chain lengths (C4 , C8 , C12 , C16 ). This provides a library of materials with variable hydrophobicity, charge density, and chain-end valency. The physical behavior of the dendron-linear PDMS hybrid copolymers significantly changes after introduction of the cationic dendron end-groups and leads to soft-solid materials as a result of inhibited chain mobility. These PDMS-dendron hybrids are expected to behave as surface-active antimicrobial additives in bulk cross-linked silicone systems.

Changing the structural and physical properties of 3-arm star poly(δ-valerolactone)s by a branch-point design

The chemical structure of a branch point of star-shaped polymers has been considered to have a small influence on the physical properties of the entire polymer. Contrary to this general notion, here we show that a 3-arm star polymer, composed of three poly(δ-valerolactone) arms extended from one side of a triptycene branch point, exhibits a remarkably high complex viscosity, compared to the analogous star-shaped polymers with a branch point of a triptycene isomer or triphenylethane.

Aryl radical initiators accumulated within layered silicates realize polystyrene with directly and regioselectively bonded aryl-terminal groups

The arbitrary design of a terminal group of polymers exploits the still-veiled functions of polymers with potential for application in fields such as drug delivery systems, photonics, and energy conversions. Here we demonstrate for the first time that polystyrenes with directly and regioselectively bonded aryl-terminal groups can be obtained via styrene radical polymerization initialized by arbitrary aryl radicals accumulated within the interlayer space of smectite clay minerals, which can be prepared by our developed 'Clay Catalysed ab intra Deamination (CCD)' method.

Organocatalytic controlled/living ring-opening polymerization of 1,3,5-triphenyl-1,3,5-tri-p-tolylcyclotrisiloxane for the precise synthesis of fusible, soluble, functionalized, and solid poly[phenyl(p-tolyl)siloxane]s

An organocatalytic controlled/living ring-opening polymerization (ROP) of 1,3,5-triphenyl-1,3,5-tri(p-tolyl)cyclotrisiloxane (PT3) produced linear poly[phenyl(p-tolyl)siloxane] (PPTS) with controlled structures.

Synthesis and hierarchical self-assembly of luminescent platinum(ii)-containing telechelic metallopolymers

Luminescent telechelic metallopolymers functionalized with platinum(ii) complexes can self-assemble into flowerlike micelles, and the resulting flowers can further form vesicle-like architectures in solution.

Triptycenyl Sulfide: A Practical and Active Catalyst for Electrophilic Aromatic Halogenation Using N-Halosuccinimides

A Lewis base catalyst Trip-SMe (Trip = triptycenyl) for electrophilic aromatic halogenation using N-halosuccinimides (NXS) is introduced. In the presence of an appropriate activator (as a noncoordinating-anion source), a series of unactivated aromatic compounds were halogenated at ambient temperature using NXS. This catalytic system was applicable to transformations that are currently unachievable except for the use of Br₂ or Cl₂: e.g., multihalogenation of naphthalene, regioselective bromination of BINOL, etc. Controlled experiments revealed that the triptycenyl substituent exerts a crucial role for the catalytic activity, and kinetic experiments implied the occurrence of a sulfonium salt [Trip-S(Me)Br][SbF₆] as an active species. Compared to simple dialkyl sulfides, Trip-SMe exhibited a significant charge-separated ion pair character within the halonium complex whose structural information was obtained by the single-crystal X-ray analysis. A preliminary computational study disclosed that the π system of the triptycenyl functionality is a key motif to consolidate the enhancement of electrophilicity.

Using the dynamic behavior of macrocyclic monomers with a bis(hindered amino)disulfide linker for the preparation of end-functionalized polymers

End-functionalized polymers were synthesized by simply heating a mixture of a macrocyclic compound with one bis(2,2,6,6-tetramethylpiperidin-1-yl)disulfide (BiTEMPS) moiety and bifunctional acyclic BiTEMPS compounds as sources of repeat units and terminal groups, respectively.

Polymorphism in the Assembly of Phase-Segregated Block Molecules: Pathway Control to 1D and 2D Nanostructures

Nanomaterials with highly ordered, one- or two-dimensional molecular morphologies have promising properties for adaptive materials. Here, we present the synthesis and structural characterization of dinitrohydrazone (hydz) functionalized oligodimethylsiloxanes (oDMSs) of discrete length, which form both 1- and 2D nanostructures by precisely controlling composition and temperature. The morphologies are highly ordered due to the discrete nature of the siloxane oligomers. Columnar, 1D structures are formed from the melt within a few seconds as a result of phase segregation in combination with π-π stacking of the hydrazones. By tuning the length of the siloxane, the synergy between these interactions is observed which results in a highly temperature sensitive material. Macroscopically, this gives a material that switches reversibly and fast between an ordered, solid and a disordered, liquid state at almost equal temperatures. Ordered, 2D lamellar structures are formed under thermodynamic control by cold crystallization of the hydrazones in the amorphous siloxane bulk via a slow process. We elucidate the 1- and 2D morphologies from the nanometer to molecular level by the combined use of solid state NMR and X-ray scattering. The exact packing of the hydrazone rods within the cylinders and lamellae surrounded the liquid-like siloxane matrix is clarified. These results demonstrate that controlling the assembly pathway in the bulk and with that, tuning the nanostructure dimensions and domain spacings, material properties are altered for applications in nanotechnology or thermoresponsive materials.

Association and relaxation of supra-macromolecular polymers

This paper describes the structures created by assembling functionalised entangled polymers and the effect these have on the rheology of the material. A polybutadiene (PBd) linear polymer precursor of sufficient molecular weight to be entangled is used. This is end functionalised with the self-associating group 2-ureido-4pyrimidinone (UPy). Interestingly, despite the relatively high molecular weight of the precursor diluting the UPy concentration, the effect on the material's properties is significant. To characterise the assembled microstructure we present linear rheology, extensional non-linear rheology and small angle X-ray scattering (SAXS). The linear rheology shows that the functionalised PBd assembles into large macro-structures where the terminal relaxation time is up to seven orders of magnitude larger than the precursor. The non-linear rheology shows strain-hardening over a broad range of strain-rates. We then show by both SAXS and modelling of the extensional data that there must exist clusters of UPy associations and hence assembled polymers with branched architecture. By modelling the supra-molecular structure as an effective linear polymer, we show that this would be insufficient in predicting the strain-hardening behaviour at lower extension-rates. Therefore, in this flow regime the strain-hardening is likely to be caused by branching. This is backed up by SAXS measurements which show that UPy clusters larger than pair-pair groups exist.

Triptycene Tripods for the Formation of Highly Uniform and Densely Packed Self-Assembled Monolayers with Controlled Molecular Orientation

When employing self-assembled monolayers (SAMs) for tuning surface and interface properties, organic molecules that enable strong binding to the substrate, large-area structural uniformity, precise alignment of functional groups, and control of their density are highly desirable. To achieve these goals, tripod systems bearing multiple bonding sites have been developed as an alternative to conventional monodentate systems. Bonding of all three sites has, however, hardly been achieved, with the consequence that structural uniformity and orientational order in tripodal SAMs are usually quite poor. To overcome that problem, we designed 1,8,13-trimercaptomethyltriptycene (T1) and 1,8,13-trimercaptotriptycene (T2) as potential tripodal SAM precursors and investigated their adsorption behavior on Au(111) combining several advanced experimental techniques and state-of-the-art theoretical simulations. Both SAMs adopt dense, nested hexagonal structures but differ in their adsorption configurations and structural uniformity. While the T2-based SAM exhibits a low degree of order and noticeable deviation from the desired tripodal anchoring, all three anchoring groups of T1 are equally bonded to the surface as thiolates, resulting in an almost upright orientation of the benzene rings and large-area structural uniformity. These superior properties are attributed to the effect of conformationally flexible methylene linkers at the anchoring groups, absent in the case of T2. Both SAMs display interesting electronic properties, and, bearing in mind that the triptycene framework can be functionalized by tail groups in various positions and with high degree of alignment, especially T1 appears as an ideal docking platform for complex and highly functional molecular films.

Telechelic amphiphilic metallopolymers end-functionalized with platinum(ii) complexes: synthesis, luminescence enhancement, and their self-assembly into flowerlike vesicles and giant flowerlike vesicles

Telechelic amphiphilic metallopolymers can self-assemble in solution to create nanosized flowerlike vesicles, where the two platinum(ii) complex ends are connected to the same vesicular core and the central PEG chains form loops as a corona.