Cleavage of N–H Bond of Ammonia via Metal–Ligand Cooperation Enables Rational Design of a Conceptually New Noyori–Ikariya Catalyst

Cobalt-Catalyzed Asymmetric Hydrogenation of α-Hydroxy Ketones Enabled by a Carboxylic Acid Additive Promotion Strategy

Highly enantioselective hydrogenation of α-hydroxy ketones was achieved by applying the catalytic combination of cobalt acetate and chiral Ph-BPE ligand, supplemented by a carboxylic acid additive promotion strategy. The carboxylic acid additive significantly increases both reactivity and enantioselectivity, allowing for the highly efficient generation of chiral 1,2-diols with up to 99% ee. The application utility is proved through derivations and a total synthesis of (R)-(-)-eliprodil. Mechanistic studies, including control experiments and DFT calculations, support the proposed catalytic mechanism and explain the origin of enantioselectivity.

Formation of Radical-like NH Ligand from NH3 at Ambient Conditions Mediated by Dialkyl Rare-Earth Complexes

Although intensive work on ammonia activation has been carried out in recent decades, generating nitrogen-centered radicals from NH3 under ambient conditions remains quite challenging. In the presented research, the conversion of NH3 to radical-like NH ligand has been achieved by the reactions of a series of dialkyl rare-earth (RE) complexes (1-RE, RE = Tb, Dy, Y, Ho, Er, Yb, and Lu) supported by β-diketiminate ligands with NH3 in n-hexane at room temperature, resulting in the formations of the radical-like μ3-NH ligands containing trinuclear RE complexes (2-RE). The radical-like feature of the μ3-NH ligand was revealed by electron paramagnetic resonance and magnetic measurements, radical trapping experiments, and computational spin density analysis. In addition, H2 was detected to form during the reaction of 1-RE with NH3, indicating that the radical-like μ3-NH ligand was likely to be generated via N-H bond homolysis. Moreover, the solvents and coordination pattern of β-diketiminate ligands are crucial for the formation of the radical-like μ3-NH ligand from NH3. When toluene instead of n-hexane was used in the reaction of 1-RE with NH3, an array of octaamido tetranuclear RE complexes (3-RE) was obtained. The reaction of the dialkyl yttrium complex (4-Y) bearing a modified β-diketiminate ligand, in which the two mesityl substituents are replaced by a 2,6-diisopropylphenyl group and a 2-(dimethylamino)ethyl group, with NH3 in both n-hexane and toluene only yielded a tetranuclear yttrium complex carrying the dianionic closed-shell μ3-NH ligands (5-Y).

Catalytic Asymmetric Transfer Hydrogenation of Acylboronates: BMIDA as the Privileged Directing Group

Developing a general, highly efficient, and enantioselective catalytic method for the synthesis of chiral alcohols is still a formidable challenge. We report in this article the asymmetric transfer hydrogenation (ATH) of N-methyliminodiacetyl (MIDA) acylboronates as a general substrate-independent entry to enantioenriched secondary alcohols. ATH of acyl-MIDA-boronates with (het)aryl, alkyl, alkynyl, alkenyl, and carbonyl substituents delivers a variety of enantioenriched α-boryl alcohols. The latter are used in a range of stereospecific transformations based on the boron moiety, enabling the synthesis of carbinols with two closely related α-substituents, which cannot be obtained with high enantioselectivities using direct asymmetric hydrogenation methods, such as the (R)-cloperastine intermediate. Computational studies illustrate that the BMIDA group is a privileged enantioselectivity-directing group in Noyori-Ikariya ATH compared to the conventionally used aryl and alkynyl groups due to the favorable CH-O attractive electrostatic interaction between the η6-arene-CH of the catalyst and the σ-bonded oxygen atoms in BMIDA. The work expands the domain of conventional ATH and shows its huge potential in addressing challenges in symmetric synthesis.

Asymmetric hydrogenation of 1,1-diarylethylenes and benzophenones through a relay strategy

Homogenous transition-metal catalysts bearing a chiral ligand are widely used for asymmetric hydrogenation of unsaturated compounds such as olefins and ketones, providing efficient concise access to products with chiral carbon centers. However, distinguishing the re and si prochiral faces of a double bond bearing two substituents that are sterically and electronically similar is challenging for these catalysts. Herein, we report a relay strategy for constructing compounds with a chiral gem-diaryl carbon center by means of a combination of selective arene exchange between 1,1-diarylethylenes or benzophenones with (naphthalene)Cr(CO)3 and subsequent asymmetric hydrogenation. During the hydrogenation, the Cr(CO)3 unit facilitate differentiation of the two prochiral faces of the substrate double bond via formation of a three-dimensional complex with one of the aromatic rings by selective arene exchange. Density functional theory calculations reveal that during the hydrogenation, chromium coordination affected π-π stacking of the substrate and the catalyst ligand, leading to differentiation of the prochiral faces.

Regioselective Transfer Hydrogenative Defluorination of Polyfluoroarenes Catalyzed by Bifunctional Azairidacycle

The catalytic hydrodefluorination (HDF) with a bifunctional azairidacycle using HCOOK was examined for cyano- and chloro-substituted fluoroarenes, including penta- and tetrafluorobenzonitriles, tetrafluoroterephthalonitrile, tetrafluorophthalonitrile, 3-chloro-2,4,5,6-tetrafluoropyridine, and 4-cyano-2,3,5,6-tetrafluoropyridine. The reaction was performed in the presence of a controlled amount of HCOOK with a substrate/catalyst ratio (S/C) of 100 in a 1:1 mixture of 1,2-dimethoxyethane (DME) and H2O at an ambient temperature of 30 °C to obtain partially fluorinated compounds with satisfactory regioselectivities. The C–F bond cleavage proceeded favorably at the para position of substituents other than fluorine, which is in consonance with the nucleophilic aromatic substitution mechanism. In the HDF of tetrafluoroterephthalonitrile and 4-cyano-2,3,5,6-tetrafluoropyridine, which do not contain a fluorine atom at the para position of the cyano group, the double defluorination occurred solely at the 2- and 5-positions, as confirmed by X-ray crystallography. The HDF of 3-chloro-2,4,5,6-tetrafluoropyridine gave preference to the C–F bond cleavage over the C–Cl bond cleavage, unlike the dehalogenation pathway via electron-transfer radical anion fragmentation. In addition, new azairidacycles with an electron-donating methoxy substituent on the C–N chelating ligand were synthesized and served as a catalyst precursor (0.2 mol%) for the transfer hydrogenative defluorination of pentafluoropyridine, leading to 2,3,5,6-tetrafluoropyridine with up to a turnover number (TON) of 418.

Theoretical Study of N-H σ-Bond Activation by Nickel(0) Complex: Reaction Mechanism, Electronic Processes, and Prediction of Better Ligand

N-H σ-bond activation of alkylamine by Ni(PCy₃) was investigated using density functional theory (DFT) calculations. When simple alkylamine NHMe₂ is a reactant, both concerted oxidative addition in Ni(PCy₃)(NHMe₂) and ligand-to-ligand H transfer reaction in Ni(PCy₃)(C₂H₄)(NHMe₂) are endergonic and need a high activation energy. When NH(Me)(Bs) (Bs = SO₂Ph, a model of tosyl group used in experiments) is a reactant, both reactions are exergonic and occur easily with a much smaller activation energy. The much larger reactivity of NH(Me)(Bs) than that of NHMe₂ results from the stronger Ni-N(Me)(Bs) bond than the Ni-NMe₂ bond and the presence of the Ni-O bonding interaction between the Bs group and the Ni atom in the product. N-Heterocyclic carbene, 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IPr), is computationally predicted to be better than PCy₃ because the Ni-NMe₂ and Ni-N(Me)(Bs) bonds in the IPr complex are stronger, respectively, than those of the PCy₃ complex. The introduction of the electron-withdrawing Bs group to the N atom of amine and the use of IPr as a ligand are recommended for the N-H σ-bond activation. The C-H σ-bond activations of benzene via the oxidative addition and the ligand-to-ligand H transfer reaction were also investigated here for comparison with the N-H σ-bond activation. The differences between the C-H σ-bond activation of benzene and the N-H σ-bond activation of these amines are discussed in terms of the N-H, C-H, Ni-Ph, and Ni-NMe₂, and Ni-N(Me)(Bs) bond energies and back-donation to benzene from the Ni atom.

Catalytic Stereoconvergent Synthesis of Homochiral β-CF3, β-SCF3, and β-OCF3 Benzylic Alcohols

We describe an efficient catalytic strategy for enantio- and diastereoselective synthesis of homochiral β-CF₃, β-SCF₃, and β-OCF₃ benzylic alcohols. The approach is based on dynamic kinetic resolution (DKR) with Noyori–Ikariya asymmetric transfer hydrogenation leading to simultaneous construction of two contiguous stereogenic centers with up to 99.9% ee, up to 99.9:0.1 dr, and up to 99% isolated yield. The origin of the stereoselectivity and racemization mechanism of DKR is rationalized by density functional theory calculations. Applicability of the previously inaccessible chiral fluorinated alcohols obtained by this method in two directions is further demonstrated: As building blocks for pharmaceuticals, illustrated by the synthesis of heat shock protein 90 inhibitor with in vitro anticancer activity, and in particular, needle-shaped crystals of representative stereopure products that exhibit either elastic or plastic flexibility, which opens the door to functional materials based on mechanically responsive chiral molecular crystals.

Coordination-Induced N-H Bond Splitting of Ammonia and Primary Amine of CuI -MOFs

We report a porous three-dimensional anionic tetrazolium based Cu^I -MOF 1, which is capable of cleaving the N-H bond of ammonia and primary amine, as well as the O-H bond of H₂ O along with spontaneous H₂ evolution. In the gas-solid phase reaction of 1 with ammonia and water vapor, Cu^I -MOF 1 was gradually oxidized to NH₂ -Cu^II -MOF and OH-Cu^II -MOF, through single-crystal-to-single-crystal (SCSC) structural transformations, which was confirmed by XPS, PXRD and X-ray single-crystal diffraction. Density functional theory (DFT) demonstrated that Cu^I -MOF could lower N-H bond dissociation free energy of ammonia through coordination-induced bond weakening and promote H₂ evolution by the reduction potential of 1. To our knowledge, this is the first example of MOFs that activate ammonia and amine in gas-solid manner.

Ambiphilic boryl groups in a neutral Ni(ii) complex: a new activation mode of H2

The concept of metal-ligand cooperation opens new avenues for the design of catalytic systems that may offer alternative reactivity patterns to the existing ones. Investigations of this concept with ligands bearing a boron center in their skeleton established mechanistic pathways for the activation of small molecules in which the boron atom usually performs as an electrophile. Here, we show how this electrophilic behavior can be modified by the ligand trans to the boron center, evincing its ambiphilic nature. Treatment of diphosphinoboryl (PBP) nickel-methyl complex 1 with bis(catecholato)diboron (B2Cat2) allows for the synthesis of nickel(ii) bis-boryl complex 3 that promotes the clean and reversible heterolytic cleavage of dihydrogen leading to the formation of dihydroborate nickel complex 4. Density functional theory analysis of this reaction revealed that the heterolytic activation of H2 is facilitated by the cooperation of both boryl moieties and the metal atom in a concerted mechanism that involves a Ni(ii)/Ni(0)/Ni(ii) process. Contrary to 1, the boron atom from the PBP ligand in 3 behaves as a nucleophile, accepting a formally protic hydrogen, whereas the catecholboryl moiety acts as an electrophile, receiving the attack from the hydride-like fragment. This manifests the dramatic change in the electronic properties of a ligand by tuning the substituent trans to it and constitutes an unprecedented cooperative mechanism that involves two boryl ligands in the same molecule operating differently, one as a Lewis acid and the other one as a Lewis base, in cooperation with the metal. In addition, reactivity towards different nucleophiles such as amines or ammonia confirmed the electrophilic nature of the Bcat moiety, allowing the formation of aminoboranes.

Mechanistic diversity in acetophenone transfer hydrogenation catalyzed by ruthenium iminophosphonamide complexes

A series of arene ruthenium iminophosphonamide complexes, [(Arene)RuCl{R₂P(NR')₂}] (1), bearing various arenes and R,R' substituents on the NPN ligand have been investigated as precatalysts in acetophenone transfer hydrogenation in basic and base-free isopropanol. The results clearly demonstrate the presence of two distinct reaction mechanisms, which are controlled by the basicity of the N-atoms. Complexes 1 in which both R' substituents are aryl groups are only active once the neutral hydride complex [(Arene)RuH{R₂P(NR')₂}] (2) is generated in basic isopropanol, the latter being able to reduce a ketone via a stepwise hydride and proton transfer. On the other hand, complexes in which at least one R' group is Me readily catalyze the reaction in the absence of base. In the latter case, the results of kinetic studies and DFT calculations support an outer-sphere concerted asynchronous hydride and proton transfer assisted by the basic N-atom of the NPN ligand, which promotes catalysis via precoordination of an alcohol molecule by hydrogen bonding.

Mechanistic insight into the azo radical-promoted dehydrogenation of heteroarene towards N-heterocycles

A mechanistic analysis reflecting the desaturation of heteroarene towards the efficient synthesis of pyrimidine and triazine under mild conditions.

Probing the Effects of Heterocyclic Functionality in [(Benzene)Ru(TsDPENR)Cl] Catalysts for Asymmetric Transfer Hydrogenation

A range of TsDPEN catalysts containing heterocyclic groups on the amine nitrogen atom were prepared and evaluated in the asymmetric transfer hydrogenation of ketones. Bidentate and tridentate ligands demonstrated a mutual exclusivity directly related to their function as catalysts. A broad series of ketones were reduced with these new catalysts, permitting the ready identification of an optimal catalyst for each substrate and revealing the subtle effects that changes to nearby donor groups can exhibit.