Sulfur-Based Intramolecular Hydrogen-Bond: Excited-State Hydrogen-Bond On/Off Switch with Dual Room-Temperature Phosphorescence

Enhanced Aggregation-Induced Delayed Electrochemiluminescence Triggered by Spatial Perturbation of Organic Dots

Development of highly efficient, heavy-metal-free electrochemiluminescence (ECL) materials is attractive but still challenging. Herein, we report an aggregation-induced delayed ECL (AIDECL) active organic dot (OD) composed of a tert-butoxy-group-substituted benzophenone-dimethylacridine compound, which shows high ECL efficiency. The resultant ODs exhibit 2.1-fold higher ECL efficiency compared to control AIDECL-active ODs. Molecular stacking combined with theoretical calculations suggests that tert-butoxy groups effectively participate in the intermolecular interactions, further inhibiting the molecular motions in the aggregated states and thus accelerating radiative decay. On the basis of these ODs exhibiting excellent ECL performance, a proof-of-concept biosensor is constructed for the detection of miR-16 associated with Alzheimer's disease, which demonstrates excellent detection ability with the limit of detection of 1.7 fM. This work provides a new approach to improve the ECL efficiency and enriches the fundamental understanding of the structure-property relationship.

Theoretical investigation on regulating photophysical properties and proton transfer behavior by electronegativity for near-infrared emitting styryl dyes

Our main focus is to explore the atomic electronegativity-dependent photoinduced behavior of styryl derivatives (HBO, HBS, and HBSe). The results of structural parameter calculation by the DFT method show that the intramolecular hydrogen bonds of normal and tautomer form are strengthened and weakened, respectively, in an excited state (S1), which is conducive to the excited intramolecular proton transfer (ESIPT) process. The enhancement of excited hydrogen bond is beneficial to the ESIPT process from the aspects of infrared vibration frequency (IR), Mulliken's charge analysis, and density gradient reduction (RDG). Additionally, by determining the bond energy with the band critical point (BCP) parameter, we found that the lower the electronegativity of the atom, the larger the hydrogen bond strength at the excited state and the more likely ESIPT reaction occurs. Meanwhile, the intramolecular H-bonds O-H…N in HBO, HBS, and HBSe are enhanced with the weakened electron-withdrawing capacity of the atom (from O to S and Se). Subsequently, frontier molecular orbital (FMOs) and charge density difference (CDD) analyses essentially revealed that electron redistribution induces the ESIPT process. Low atomic electronegativity exhibits the high chemical activity of the excited state. Furthermore, to demonstrate the electronegativity-dependent ESIPT behavior of the system, we built potential energy curves (PECs) and located the transition states (TS) of proton transfer processes.

Regulated stepwise ESDPT mechanism associated with chalcogen substitutions in BDIBD derivatives

Inspired by the brilliant photochemical and photophysical properties of organic molecules containing chalcogenide substitutions that could be potentially applied across various disciplines, in this work, the effects of the atomic electronegativity of chalcogens (O, S, and Se) on hydrogen bond interactions and excited state proton transfer (ESPT) are mainly focused. We present characteristic oxygen-hydroxybenzazole-substituted 2,5-bis(4,5-diphenyl-1H-imidazol-2-yl)benzene-1,4-diol (BDIBD) derivatives that contain intramolecular double hydrogen bonds. The main objective of this study was to explore in detail the influence of the change of chalcogen atomic electronegativity on dual hydrogen bond interaction and ESPT behavior. By comparing the structural changes and infrared (IR) vibrational spectra of BDIBD derivative (BDIBD-O, BDIBD-S and BDIBD-Se) fluorophores in S0 and S1 states, combined with the preliminary detection of hydrogen bond interaction via the core-valence bifurcation (CVB) index and predicted hydrogen bonding energy (EHB), we conclude that dual hydrogen bonds should be strengthened in the S1 state, which is favorable for the occurrence of ESPT reactions. The charge recombination behavior of hydrogen bonds, induced by photoexcitation, further illustrates this point. By constructing potential energy surfaces (PESs) based on restrictive optimization and by searching the transition state (TS) structure, we finally elucidate stepwise excited-state double proton transfer (ESDPT). Specifically, we confirm that a change in atomic electronegativity has a regulatory effect on the ESDPT behavior in BDIBD derivatives, that is, lower atomic electronegativity is more conducive to stepwise ESDPT.

Novel Quinoline-Based Thiosemicarbazide Derivatives: Synthesis, DFT Calculations, and Investigation of Antitubercular, Antibacterial, and Antifungal Activities

The discovery of new antimicrobial agents as a means of treating drug-resistant microbial pathogens is of utmost significance to overcome their immense risk to human well-being. The current investigation involves the development, synthesis, and assessment of the antimicrobial efficacy of novel quinoline derivatives incorporating a thiosemicarbazide functionality. To design the target compounds (QST1-QST14), we applied the molecular hybridization approach to link various thiosemicarbazides to the quinoline core with a sulfonyl group. Upon the synthesis and completion of structural characterization via spectroscopic techniques (1H NMR, 13C NMR, 15N NMR, IR, and HRMS), the title molecules were extensively evaluated for their potential antitubercular, antibacterial, and antifungal activities. N-(3-Chlorophenyl)-2-(quinolin-8-ylsulfonyl)hydrazine-1-carbothioamide (QST4), the most effective compound against Mycobacterium tuberculosis H37Rv, was also tested on isoniazid-resistant clinical isolates with katG and inhA promoter mutations. Based on molecular docking studies, QST4 was also likely to demonstrate its antimycobacterial activity through inhibition of the InhA enzyme. Furthermore, three derivatives (QST3, QST4, and QST10) with preferable antimicrobial and drug-like profiles were also shown to be nontoxic against human embryonic kidney (HEK) cells. All compounds were optimized by the density functional theory method using B3LYP with the 6-31+G(d,p) basis set. Structural analysis, natural bond orbital calculations of donor-acceptor interactions, molecular electrostatic potential analysis, and frontier molecular orbital analysis were carried out. Quantum chemical descriptors and charges on the atoms were determined to compare the strengths of the intramolecular hydrogen bonds formed and their stabilities. We determined that the sulfur atom forms a stronger intramolecular hydrogen bond than the nitrogen, oxygen, and fluorine atoms in these sulfonyl thiosemicarbazide derivatives.

A brand-new type of excited-state proton transfer (ESIPT) molecule based on sulfoxide/sulfenic acid tautomerism

The excited-state proton transfer (ESIPT) behavior of organic fluorophores has attracted much attention due to their unique photophysical properties. So far, ESIPT studies have mainly focused on the transfer of hydrogen atoms between N-N, N-O, or O-O. In this work, a brand-new type of ESIPT molecule based on sulfoxide/sulfenic acid tautomerism has been thoroughly investigated. The sulfoxide/sulfenic acid tautomerization process requires one step and two steps in the ground and first excited singlet states, respectively. A range of density functional theory and time-dependent density functional theory methods have been employed to investigate these structures, and the changes in aromaticity may be responsible for obtaining the ESIPT process. This work presents a novel ESIPT process, showcasing molecules that exhibit distinctive properties compared to conventional ESIPT compounds. These findings are expected to expand the horizons of experimental research in ESIPT.

Selection of regioselective DNA aptamer for detection of homocysteine in nondeproteinized human plasma

Small molecule-binding aptamers often suffer from high cross reactivity to structure analogues in biological samples, limiting their value for clinical diagnosis. Herein, we present a method to overcome this issue, by performing binding-inhibited organic reaction-based regioselective selection of aptamers against homocysteine (Hcy), which is a marker for diagnosing many disorders including stroke and Alzheimer's. This approach has led to isolation of a DNA aptamer that binds to the alkane thiol chain of Hcy with exceptional specificity against cysteine. It also binds with oxidized Hcy at weaker affinity. Using this new aptamer, we produced a reusable fluorescent optical fiber aptasensor for direct and validated detection of both free and total Hcy in nondeproteinized patient plasma in the diagnostic concentration range. The binding site-specific aptamer selection and optical-fiber-sensing strategy can expand the practical utility of aptamers in clinical diagnosis.

One/Two-Photon-Excited ESIPT-Attributed Coordination Polymers with Wide Temperature Range and Color-Tunable Long Persistent Luminescence

The multiple metastable excited states provided by excited-state intramolecular proton transfer (ESIPT) molecules are beneficial to bring temperature-dependent and color-tunable long persistent luminescence (LPL). Meanwhile, ESIPT molecules are intrinsically suitable to be modulated as D-π-A structure to obtain both one/two-photon excitation and LPL emission simultaneously. Herein, we report the rational design of a dynamic CdII coordination polymer (LIFM-106) from ESIPT ligand to achieve the above goals. By comparing LIFM-106 with the counterparts, we established a temperature-regulated competitive relationship between singlet excimer and triplet LPL emission. The optimization of ligand aggregation mode effectively boost the competitiveness of the latter. In result, LIFM-106 shows outstanding one/two-photon excited LPL performance with wide temperature range (100-380 K) and tunable color (green to red). The multichannel radiation process was further elucidated by transient absorption and theoretical calculations, benefiting for the application in anti-counterfeiting systems.

Synthesis of Naphthalimide Derivatives and Their Luminescence upon Complexation with Cucurbit[n]uril Hosts

A series of naphthalimide derivatives are synthesized and their binding behavior upon complexation with cucurbit[n]urils (CB[n]s) has been investigated. With a heavy atom (bromine) on the naphthalimide core, 4-bromo-1,8-naphthalimide derivatives 1-4 show short room-temperature phosphorescence (RTP) lifetimes with low quantum yields. Their RTP properties are significantly enhanced in the presence of CB[8] or CB[10] both in aqueous solution and solid state owing to the efficient suppression of nonradiative decay and isolation of quenching factors by the rigid cavity of CB[n]. Without the bromine atom, 1,8-naphthalimide derivatives 5 and 6 show strong excimer emission upon complexation with CB[10] accompanied by fluorescence transition from blue to cyan. The fluorescence colors of 4-(dimethylamino)-1,8-naphthalimide derivatives 7 and 8 change from blue to white to yellow with the addition of CB[n]. This host-guest complexation strategy to modulate the luminescence of the luminophore would further broaden the application of luminescent materials.

Dangling Water Molecules Bridge for ESIPT in Aggregated TMP: A Theoretical Study

We present a theoretical study on the occurrence of excited-state proton transfer in an aggregated structure of 2-(benzo[d]thiazol-2-yl)-6-methoxyphenol (TMP) exclusively in water among polar solvents, as reported in a recent experiment (Bhattacharyya, A. New J. Chem. 2019, 43, 15087). Our extensive investigation of the TMP monomer and dimer implementing density functional theory (DFT) and time-dependent density functional theory (TDDFT) methods, in three different solvents, namely, water, methanol, and dimethyl sulfoxide (DMSO), with explicit inclusion of solvent molecules demonstrated the existence of both enol and keto forms of the TMP dimer in the excited state, but only in water; this confirmed the experimental emission spectra completely and simultaneously validated the aggregation-induced emission phenomenon. Further analysis of various parameters such as potential energy scan (PES) of the hydroxyl (O-H) bond involved in hydrogen bonding, frontier molecular orbitals (FMOs), molecular electrostatic potential (MEP), and infrared (IR) stretching frequencies of both the monomer and dimer forms of TMP in different solvents clearly indicated the geometry of the dimer, with the arrangement of the solvent molecules to be the sole reason for the excited-state charge transfer. The bridging alignment of water molecules in between the stacked units of the TMP dimer results in intermolecular interactions, ultimately leading to intermolecular proton transfer in the excited state.

Computational Insights into Excited State Intramolecular Double Proton Transfer Behavior Associated with Atomic Electronegativity for Bis(2'-benzothiazolyl)hydroquinone

Inspired by the distinguished regulated photochemical and photophysical properties of 2-(2'-hydroxyphenyl)benzazole derivatives, in this work, the novel bis(2'-benzothiazolyl)hydroquinone (BBTHQ) fluorophore is explored, looking at its photo-induced behaviors associated with different substituted atomic electronegativities, i.e., BBTHQ-SO, BBTHQ-SS and BBTHQ-Se compounds. From the structural changes, infrared (IR) vibrational variations and simulated core-valence bifurcation (CVB) indexes for the dual hydrogen bonds for the three BBTHQ derivatives, we see that low atomic electronegativity could be conducive to enhancing hydrogen bonding effects in the S1 state. Particularly, the O4-H5⋯N6 of BBTHQ-SO and the O1-H2⋯N3 of BBTHQ-SSe could be strengthened to be more intensive in the S1 state, respectively. Looking into the charge recombination induced by photoexcitation, we confirm a favorable ESDPT trend deriving from the charge reorganization of the dual hydrogen bonding regions. By constructing the potential energy surfaces (PESs) along with the ESDPT paths for the BBTHQ-SO, BBTHQ-SS and BBTHQ-Se compounds, we not only unveil stepwise ESDPT behaviors, but also present an atomic electronegativity-regulated ESDPT mechanism.

Effects of solvent polarity on the novel excited-state intramolecular thiol proton transfer and photophysical property compared with the oxygen proton transfer

Recently, the dual-fluorescent phenomena of excited state intramolecular thiol proton transfer (ESIPT) for 3-thiolflavone derivative (3NTF) were reported by Chou and coworkers for the first time [J. Am. Chem. Soc. 143 (2021) 12715-12724], which opened a new chapter in the field of ESIPT. Based on density functional theory (DFT) and time-dependent density functional theory (TDDFT), the proton transfer processes of 3NTF in toluene, dichloromethane and acetonitrile were studied. By optimizing the structure of the ground (S0) state and first excited (S1) state of 3NTF in different solvents, the hydrogen-bond parameters and proton-transfer potential energy curves were calculated. It was shown that although photo-excitation enhanced the intramolecular hydrogen bonding strength and thus promoted the occurrence of ESIPT, the solvent polarities inhibited the enhancement of the hydrogen bond of S1 state, which was not conducive to ESIPT. The electron spectra analyses were consistent with experimental data, which confirmed the rationality of molecular configurations. The time-evolved excited state dynamics simulation was performed based on the optimized structure of 3NTF, indicating that the ESIPT was an ultrafast photochemical reaction less than 180 fs. Moreover, we compared the potential energy surfaces of ESIPT, electronic structures based on natural transition orbitals (NTOs) method and electron-hole isosurfaces for the 3NTF and the traditional flavone molecule (3NHF), concluded that the unusually large Stokes shift fluorescence of 3NTF was mainly caused by the coupling of ESIPT and twisting intramolecular charge transfer (TICT), and the 3NTF isomer had the more nπ* character in the electron transition process. The nπ* ICT significantly increased with the decrease of solvent polarities, affecting the molecular photophysical properties, this made it more widely used in biomedical, photochemical, materials science and other fields.

Quest for singlet fission of organic sulfur-containing systems in the higher lying singlet excited state: application prospects of anti-Kasha's rule

In this study, we explore the possibilities of the deactivating pathways of organic thione containing systems through first-principles calculations. We particularly pay attention to the second lying singlet excited state, S₂, due to its large energy difference from the lowest lying S₁ state in the sulfur-containing systems. Several theoretical models including the previously synthesized thiones and the strategically designed molecules are investigated to search for the basic conjugation unit that exhibits the prospect of S₂ fission. Various molecular motifs and different substituents are combined to maneuver the relative alignment of the relevant low excited energy states. The results lead us to conclude that the thione derivatives, under rational and delicate molecular designs, may be engineered to possess a sufficiently high S₂-S₁ energy gap as high as 2 eV and that these systems may exhibit S₂ fission to triplet excitons in the red to near infrared region.

Excited-state intramolecular proton transfer (ESIPT)-based fluorescent probes for biomarker detection: design, mechanism, and application

Biomarkers are essential in biology, physiology, and pharmacology; thus, their detection is of extensive importance. Fluorescent probes provide effective tools for detecting biomarkers exactly. Excited state intramolecular proton transfer (ESIPT), one of the significant photophysical processes that possesses specific photoisomerization between Keto and Enol forms, can effectively avoid annoying interference from the background with a large Stokes shift. Hence, ESIPT is an excellent choice for biomarker monitoring. Based on the ESIPT process, abundant probes were designed and synthesized using three major design methods. In this review, we conclude probes for 14 kinds of biomarkers based on ESIPT explored in the past five years, summarize these general design methods, and highlight their application for biomarker detection in vitro or in vivo.

Unveiling the effects of atomic electronegativity on ESIPT behaviors for FQ-OH system: A theoretical study

In this work, we mainly focus on exploring the effects of atomic electronegativity on excited state intramolecular proton transfer (ESIPT) behavior for novel FQ-OH derivatives theoretically. Combining analyses of geometrical changes, infrared (IR) spectral variations, and bonding energies via band critical point (BCP) parameters, we clarify the excited state hydrogen bonding strength is enhancing with decrease of atomic electronegativity. In addition, photo-induced charge reorganization and different energy gap of momentous frontier molecular orbitals (MOs) further reflect intramolecular charge transfer (ICT) promotes ESIPT reaction. Low atomic electronegativity reveals excited state high kinetic dynamics and chemical activities. Via constructing potential energy curves (PECs) and searching transition state (TS), we clarify atomic electronegativity dependent ESIPT behavior for FQ-OH. Particularly, the modification of atomic electronegativity also plays critical roles in regulating UV-Vis spectra. This work not only uncovering detailed ESIPT mechanism for FQ-OH, but also presents a novel regulated mechanism via atomic electronegativity.

Long-Lived Afterglow from Elemental Sulfur Powder: Synergistic Effects of Impurity and Structure

Elemental sulfur is not traditionally considered as an afterglow material, even though it can be endowed with fluorescence properties through processing it into nanodots. Herein, we discovered that elemental sulfur powder could emit room temperature phosphorescence (RTP) with a lifetime of 3.7 ms. A long-lived (>12 s) afterglow emission at 77 K could also be observed by the naked eye. Detailed investigations suggested that such a special phenomenon was attributed to impurity-related traps coupled with conduction and valence bands. After the sulfur is processed into nanodots, the rigid environment formed by the cross-linking of the surface ligands could stabilize the excited charges from quenching. This results in the promotion of RTP intensity and lifetime to achieve an emission lifetime of 200 ms. These results confirm the unique RTP of elemental sulfur powder, and also suggest the potential of sulfur-based materials as versatile components for the development of RTP materials.

Excitation Energy-Dependent, Excited-State Intramolecular Proton Transfer-Based Dual Emission in Poor Hydrogen-Bonding Solvents

2-(2'-Hydroxyphenyl)benzoxazole (HBO) substituted at the 5'-position with bipyridylvinylene phenylenevinylene (compound 2) produces both normal and, via an excited-state intramolecular proton transfer (ESIPT) reaction, tautomer emissions in solvents that preserve intramolecular hydrogen bonds. The abundance of the tautomer emission from compound 2 in a poor hydrogen-bonding solvent increases in response to the application of a higher excitation energy. Based on quantum chemical calculations, the excitation-dependent dual emission is consistent with a model in which the ESIPT reaction is more favored in the S₂ than in the S₁ electronically excited state.

Achieving Record-Efficiency Organic Solar Cells upon Tuning the Conformation of Solid Additives

Volatile solid additives (SADs) are considered as a simple yet effective approach to tune the film morphology for high-performance organic solar cells (OSCs). However, the structural effects of the SADs on the photovoltaic performance are still elusive. Herein, two volatilizable SADs were designed and synthesized. One is SAD1 with twisted conformation, while the other one is planar SAD2 with the S···O noncovalent intramolecular interactions (NIIs). The theoretical and experimental results revealed that the planar SAD2 with smaller space occupation can more easily insert between the Y6 molecules, which is beneficial to form a tighter intermolecular packing mode of Y6 after thermal treatment. As a result, the SAD2-treated OSCs exhibited less recombination loss, more balanced charge mobility, higher hole transfer rate, and more favorable morphology, resulting in a record power conversion efficiency (PCE) of 18.85% (certified PCE: 18.7%) for single-junction binary OSCs. The universality of this study shed light on understanding the conformation effects of SADs on photovoltaic performances of OSCs.

N-Hydroxy-N-oxide photoinduced tautomerization and excitation wavelength dependent luminescence of ESIPT-capable zinc(II) complexes with a rationally designed 1-hydroxy-2,4-di(pyridin-2-yl)-1H-imidazole ESIPT-ligand

The ability of 1-hydroxy-1H-imidazoles to undergo proton transfer processes and to exist in N-hydroxy and N-oxide tautomeric forms can be used in coordination chemistry for the design of ESIPT-capable complexes. A series of ESIPT-capable zinc(II) complexes [Zn(HL)Hal2] (Hal = Cl, Br, I) with a rationally designed ESIPT-ligand 1-hydroxy-5-methyl-2,4-di(pyridin-2-yl)-1H-imidazole (HL) featuring spatially separated metal binding and ESIPT sites have been synthesized and characterized. Crystals of these compounds consist of a mixture of two isomers of [Zn(HL)Hal2]. Only a major isomer has a short intramolecular hydrogen bond O-H⋯N as a pre-requisite for ESIPT. In the solid state, the complexes [Zn(HL)Hal2] demonstrate temperature- and excitation wavelength dependent fluorescence in the cyan region due to the interplay of two intraligand fluorescence channels with excited state lifetimes spanning from 0.2 to 4.3 ns. The coordination of HL by Zn²⁺ ions results in an increase in the photoluminescence efficiency, and the photoluminescence quantum yields (PLQYs) of the complexes reach 12% at λ_ex = 300 nm and 27% at λ_ex = 400 nm in comparison with the PLQY of free HL of ca. 2%. Quantum chemical calculations indicate that N-hydroxy-N-oxide phototautomerization is both thermodynamically and kinetically favourable in the S₁ state for [Zn(HL)Hal2]. The proton transfer induces considerable geometrical reorganizations and therefore results in large Stokes shifts of ca. 230 nm. In contrast, auxiliary ESIPT-incapable complexes [ZnL₂][Zn(OAc)₂]₂·2H₂O and [ZnL₂][ZnCl₂]₂·4H₂O with the deprotonated ligand exhibit excitation wavelength independent emission in the violet region with the Stokes shift reduced to ca. 130 nm.

Phenoxazine-Quinoline Conjugates: Impact of Halogenation on Charge Transfer Triplet Energy Harvesting via Aggregate Induced Phosphorescence

Room-temperature phosphorescence (RTP) from organic compounds has attracted increasing attention in the field of data security, sensing, and bioimaging. However, realization of RTP with an aggregate induced phosphorescence (AIP) feature via harvesting supersensitive excited charge transfer triplet (³CT) energy under visible light excitation (VLE) in single-component organic systems at ambient conditions remains unfulfilled. Organic donor-acceptor (D-A) based orthogonal structures can therefore be used to harvest the energy of the ³CT state at ambient conditions under VLE. Here we report three phenoxazine-quinoline conjugates (PQ, PQCl, PQBr), in which D and A parts are held in orthogonal orientation around the C-N single bond; PQCl and PQBr are substituted with halogens (Cl, Br) while PQ has no halogen atom. Spectroscopic studies and quantum chemistry calculations combining reference compounds (Phx, QPP) reveal that all the compounds in film at ambient conditions show fluorescence and green-RTP due to (i) radiative decay of both singlet charge transfer (¹CT) and triplet CT (³CT) states under VLE, (ii) energetic nondegeneracy of ¹CT and ³CT states (¹CT- ³CT, 0.17-0.21 eV), and (iii) spatial separation of highest and lowest unoccupied molecular orbitals. Further, we found in a tetrahydrofuran-water mixture (f _w = 90%, v/v) that both PQCl (10^-5 M) and PQBr (10^-5 M) show concentration-dependent AIP with phosphorescence quantum yields (ϕ_P) of ∼25% and ∼28%, respectively, whereas aggregate induced quenching (ACQ) was observed in PQ. The phosphorescence lifetimes (τ_P) of the PQCl and PQBr aggregates were shown to be ∼22-62 μs and ∼22-59 μs, respectively. The ϕ_P of the powder samples is found to be 0.03% (PQ), 15.6% (PQCl), and 13.0% (PQBr), which are significantly lower than that of the aggregates (10^-5 M, f _w = 90%, v/v). Film (Zeonex, 0.1 wt %) studies revealed that ϕ_P of PQ (7.1%) is relatively high, while PQCl and PQBr exhibit relatively low ϕ_P values (PQCl, 9.7%; PQBr, 8.8%), as compared with that of powder samples. In addition, we found in single-crystal X-ray analysis that multiple noncovalent interactions along with halogen···halogen (Cl···Cl) interactions between the neighboring molecules play an important role to stabilize the ³CT caused by increased rigidity of the molecular backbone. This design principle reveals a method to understand nondegeneracy of ¹CT and ³CT states, and RTP with a concentration-dependent AIP effect using halogen substituted twisted donor-acceptor conjugates.

Synergistic Brønsted/Lewis acid catalyzed aromatic alkylation with unactivated tertiary alcohols or di-tert-butylperoxide to synthesize quaternary carbon centers

Dual Brønsted/Lewis acid catalysis involving environmentally benign, readily accessible protic acid and iron promotes site-selective tert-butylation of electron-rich arenes using di-tert-butylperoxide. This transformation inspired the development of a synergistic Brønsted/Lewis acid catalyzed aromatic alkylation that fills a gap in the Friedel–Crafts reaction literature by employing unactivated tertiary alcohols as alkylating agents, leading to new quaternary carbon centers. Corroborated by DFT calculations, the Lewis acid serves a role in enhancing the acidity of the Brønsted acid. The use of non-allylic, non-benzylic, and non-propargylic tertiary alcohols represents an underexplored area in Friedel–Crafts reactivity.

Dual Brønsted/Lewis acid catalysis involving environmentally benign, readily accessible protic acid and iron promotes site-selective tert-alkylation of arenes using di-tert-butylperoxide and tertiary alcohols.

Excited-State Dependent Hydrogen Bond Natures and Their Critical Role in Determining the Photophysical Properties of Aromatic Thioketones

In this work, how the excited-state dependent hydrogen bond (H-bond) interactions control photophysical processes have been uncovered by accurate electronic structure calculations for the five lowest-lying states (S0, S1, S2,...

Unprecedented observation and characterization of sulfur-centred bifurcated hydrogen bonds

Owing to the small electronegativity of the sulfur atom, it is commonly supposed that at most one weak H-bond can be formed between a sulfur atom and an H-bond donor. In this paper, an unprecedented 2 : 1 binding species generated from two molecules of phenol and a molecule of thioether was observed and characterized by various nuclear magnetic resonance (NMR) techniques, Fourier transform-infrared (FT-IR) techniques and density functional theory (DFT) calculations, revealing the formation of sulfur-centred O-H⋯S⋯H-O bifurcated H-bonds. This work may provide a simple and efficient method for the quantitative analysis of weak H-bonds between small organic molecules.

Halogenation of a twisted non-polar π-system as a tool to modulate phosphorescence at room temperature

Halogenation of a twisted three-fold symmetric hydrocarbon with F, Cl or Br leads to strong modulation of triplet-triplet annihilation and dual phosphorescence, one thermally activated and the other very persistent and visible by eye, with different relative contributions depending on the halide. The room temperature phosphorescence is highly unusual given the absence of lone-pair-contributing heteroatoms. The interplay between the spin-orbit coupling matrix elements and the spatial configuration of the triplet state induces efficient intersystem crossing and thus room temperature phosphorescence even without relying on heteroatomic electron lone pairs. A ninefold increase of the ISC rate after introduction of three bromine atoms is accompanied by a much higher 34-fold increase of phosphorescence rate.

Prompt and Long-Lived Anti-Kasha Emission from Organic Dyes

Anti-Kasha behavior has been the subject of intense debate in the last few years, as demonstrated by the high number of papers appearing in the literature on this topic, dealing with both mechanistic and applicative aspects of this phenomenon. Examples of anomalous emitters reported in the last 10 years are collected in the present review, which is focused on strictly anti-Kasha organic molecules displaying radiative deactivation from S_n and/or T_n, with n greater than 1.

a-PET and Weakened Triplet-Triplet Annihilation Self-Quenching Effects in Benzo-21-Crown-7-Functionalized Diiodo-BODIPY

Weakening the triplet-triplet annihilation (TTA) self-quenching effect induced by sensitizers remains a tremendous challenge due to the very few investigations carried out on them. Herein, benzo-21-crown-7 (B21C7)-functionalized 2,6-diiodo-1,3,5,7-tetramethyl-8-phenyl-4,4-difluoroboradiazaindacene (DIBDP) was synthesized to investigate the influences of huge bulks and electron-rich cavities of B21C7 moieties on the fluorescence emission and triplet-state lifetimes of DIBDP moieties. Density functional theory (DFT)/time-dependent DFT (TDDFT) computable results preliminarily predicted that B21C7 moieties had influences on the fluorescence emissions of DIBDP moieties but not on their localization of triplet states of B21C7-functionalized DIBDP (B21C7-DIBDP). The UV-vis absorption spectra, fluorescence emission spectra, and cyclic voltammograms verified that there was an electron-transfer process from the B21C7 moiety to the DIBDP moiety in B21C7-DIBDP. However, the calculated results of ΔG _CS and E _CS values and nanosecond time-resolved transient absorption spectra demonstrated that the electron-transfer process from the B21C7 moiety to the DIBDP moiety in B21C7-DIBDP had direct influences on the fluorescence emission of DIBDP moieties but not on the triplet states of DIBDP moieties. The experimental values of triplet-state lifetimes of B21C7-DIBDP were obviously longer than those of DIBDP at a high concentration (1.0 × 10^-5 M); however, the fitted values of intrinsic triplet-state lifetimes of B21C7-DIBDP were slightly greater than those of DIBDP in the same solvent. These results demonstrated that the steric hindrance of B21C7 moieties could weaken the TTA self-quenching effect of DIBDP moieties at a high concentration and the a-PET effect induced a proportion of the produced singlet states of DIBDP moieties and could not emit fluorescence in the form of radiation transition but they could be transformed into triplet states through intersystem crossing (ISC) processes due to the iodine atoms in the DIBDP moiety. The stronger a-PET effects in polar solvents induced smaller fluorescence quantum yields so that more singlet states of DIBDP moieties were transformed into triplet states to weaken the TTA self-quenching effects.

Ultralong Organic Phosphorescent Foams with High Mechanical Strength

Ultralong organic phosphorescence (UOP) has aroused enormous interest in recent years. UOP materials are mainly limited to crystals or rigid host-guest systems. Their poor processability and mechanical properties critically hamper practical applications. Here, we reported a series of ultralong phosphorescent foams with high mechanical strength. Phosphorescence lifetime of the foam can reach up to 485.8 ms at room temperature. Impressively, lightweight gelatin foam can bear a compressive pressure of 4.44 MPa. Moreover, phosphorescence emission of polymer foam can be tuned from blue to orange through varying the excitation wavelength. Experimental data and theoretical calculations revealed that ultralong phosphorescence was ascribed to the fixation of multiple hydrogen bonds to the clusters of carbonyl groups. These results will allow for expanding the scope of luminescent foams, providing an ideal platform for developing ultralong phosphorescent materials with high mechanical strength.

Chapter Open for the Excited-State Intramolecular Thiol Proton Transfer in the Room-Temperature Solution

We report here, for the first time, the experimental observation on the excited-state intramolecular proton transfer (ESIPT) reaction of the thiol proton in room-temperature solution. This phenomenon is demonstrated by a derivative of 3-thiolflavone (3TF), namely, 2-(4-(diethylamino)phenyl)-3-mercapto-4H-chromen-4-one (3NTF), which possesses an -S-H···O═ intramolecular H-bond (denoted by the dashed line) and has an S₁ absorption at 383 nm. Upon photoexcitation, 3NTF exhibits a distinctly red emission maximized at 710 nm in cyclohexane with an anomalously large Stokes shift of 12 230 cm^-1. Upon methylation on the thiol group, 3MeNTF, lacking the thiol proton, exhibits a normal Stokes-shifted emission at 472 nm. These, in combination with the computational approaches, lead to the conclusion of thiol-type ESIPT unambiguously. Further time-resolved study renders an unresolvable (<180 fs) ESIPT rate for 3NTF, followed by a tautomer emission lifetime of 120 ps. In sharp contrast to 3NTF, both 3TF and 3-mercapto-2-(4-(trifluoromethyl)phenyl)-4H-chromen-4-one (3FTF) are non-emissive. Detailed computational approaches indicate that all studied thiols undergo thermally favorable ESIPT. However, once forming the proton-transferred tautomer, the lone-pair electrons on the sulfur atom brings non-negligible nπ* contribution to the S₁' state (prime indicates the proton-transferred tautomer), for which the relaxation is dominated by the non-radiative deactivation. For 3NTF, the extension of π-electron delocalization by the diethylamino electron-donating group endows the S₁' state primarily in the ππ* configuration, exhibiting the prominent tautomer emission. The results open a new chapter in the field of ESIPT, covering the non-canonical sulfur intramolecular H-bond and its associated ESIPT at ambient temperature.

Counterion Migration Driven by Light-Induced Intramolecular Charge Transfer

A series of D-π-A ⁺ pyridinium compounds, in which D = -NPh₂ and A⁺ = -PyMe⁺ are linked by various amounts of linear phenyl spacers, were strategically designed and synthesized. Their characterization revealed the presence of excited-state intramolecular charge transfer (ESICT) that triggers a corresponding response from the counterion. In medium and strong polar solvents, the fast solvent relaxation occurring after ESICT overwhelms the counterion effect, showing typical emission solvatochromism. In weakly polar solvents, ESICT induces counteranion migration for electrostatic stabilization, the time scale of which is dependent on the radius of the counteranion, the length of the π-linker, and the viscosity of the solvent. In low-viscosity organic solvents such as toluene, counteranion migration occurs within several tens to hundreds of picoseconds, resulting in a time-dependent continuous emission that can be resolved from the spectral temporal evolution. Concrete evidence for this is provided by the chemical synthesis of a D-π-A ⁺ pyridinium-sulfur trioxide^- zwitterion, where anion migration is restricted due to its internally locked ion pair. As a result, only a single emission band can be observed. These comprehensive studies prove that the ion migration process may be significant for a wide range of ESICT-type ionic fluorophores. Such an ionic movement, triggered by optically pumped ESICT of the D-π-A ⁺ dyad, is similar to the molecular machine driven by the redox reaction, but with a facile access and fast response.

The unexpected reactivity of 9-iodo-nido-carborane: from nucleophilic substitution reactions to the synthesis of tricobalt tris(dicarbollide) Na[4,4',4''-(MeOCH2CH2O)3-3,3',3''-Co3(μ3-O)(μ3-S)(1,2-C2B9H10)3]

An unusual reactivity of 9-iodo-nido-carborane [9-I-7,8-C₂B₉H₁₁]^- towards nucleophiles under strong basic conditions was revealed. The nucleophilic substitution of iodine with O- and N-nucleophiles results in [9-RO-7,8-C₂B₉H₁₁]^- (R = H, CH₂CH₂OMe) and [9-L-7,8-C₂B₉H₁₁] (L = Py, NEt₃, Me₂NCH₂CH₂NMe₂), respectively. Reaction of [9-I-7,8-C₂B₉H₁₁]^- with CoCl₂ in 1,2-dimethoxyethane in the presence of t-BuOK, depending on the order of addition of the reagents, leads either to a diastereomeric mixture of diiodo derivatives cobalt bis(dicarbollide) rac-[4,4'-I₂-3,3'-Co(1,2-C₂B₉H₁₀)₂]^- and meso-[4,7'-I₂-3,3'-Co(1,2-C₂B₉H₁₀)₂]^- or to the corresponding mixture of 2-methoxyethoxy derivatives rac-[4,4'-(MeOCH₂CH₂O)₂-3,3'-Co(1,2-C₂B₉H₁₀)₂]^- and meso-[4,7'-(MeOCH₂CH₂O)₂-3,3'-Co(1,2-C₂B₉H₁₀)₂]^-. In the presence of accidental admixture of sodium thiosulfate, the reactions of 9-iodo-nido-carborane and 9-(2'-methoxyethoxy)-nido-carborane with CoCl₂ in 1,2-dimethoxyethane were found to produce additionally unprecedented tricobalt tris(dicarbollide) cluster Na[4,4',4''-(MeOCH₂CH₂O)₃-3,3',3''-Co₃(μ³-O)(μ³-S)(1,2-C₂B₉H₁₀)₃], the central fragment of which is a trigonal bipyramid with apical oxygen and sulfur atoms, and the base is formed by the Co₃ triangle flanked by three dicarbollide ligands. In addition, the 2-methoxyethoxy substituents of the dicarbollide ligands chelate the sodium cation in such a way that they form a helix whose rotation direction depends on the enantiomer of the parent ligand. Thus, in this case, induction of the helical chirality of the complex occurs due to the point chirality of the initial inorganic ligand. It is worth noting that in the case of symmetrically substituted 2-methoxyethoxy derivative of nido-carborane [10-MeOCH₂CH₂O-7,8-C₂B₉H₁₁]^- only formation of the corresponding cobalt bis(dicarbollide) complex [8,8'-(MeOCH₂CH₂O)₂-3,3'-Co(1,2-C₂B₉H₁₀)₂]^- was observed.

Design of ratiometric monoaromatic fluorescence probe via modulating intramolecular hydrogen bonding: A case study of alkaline phosphatase sensing

Monoaromatic molecules are a category of molecules containing a single aromatic ring which generally emit light in the ultraviolet (UV) region. Despite their facile preparation, the UV emission greatly limits their application as organic probes. In this study, we developed a general method to red shift the emission of monoaromatic molecules. Significant fluorescence red-shift (∼100 nm per intramolecular hydrogen bonding) can be achieved by introducing intramolecular hydrogen bonding units to benzene, a typical monoaromatic molecule. Upon increasing the number of hydrogen bonding units on the benzene ring, UV, blue, and green emissions are screened, which are switchable by simply breaking/restoration the intramolecular hydrogen bonding. As a demonstration, with the breaking of one intramolecular H-bonding, the green emission (λ_em^max = 533 nm) of 2,5-dihydroxyterephthalic acid (DHTA) changed to cyan (λ_em^max = 463 nm) upon the formation of its phosphorylated form (denoted as PDHTA), which, in the presence of alkaline phosphatase (ALP), hydrolyzed and recovered the green emission. By taking advantage of the switchable emission colors, ratiometric in vitro and endogenous ALP sensing was achieved. This general approach offers a great promise to develop organic probes with tunable emissions for fluorescence analysis and imaging by different intramolecular hydrogen bonding.

Diphenolic acid-modified PAMAM/chlorinated butyl rubber nanocomposites with superior mechanical, damping, and self-healing properties

Based on its excellent damping properties, traditional rubber has been widely used in various industries, including aerospace, rail transit and automotive. However, the disadvantages of effective damping area, unstable damping performance, easy fatigue, and aging, greatly limited the further application of rubber materials. Thus, it is important to develop novel modified rubber damping materials. Herein, polyamidoamine dendrimers with terminal-modified phenolic hydroxyl and amine groups (G2 PAMAM-H) were designed and used as modifiers to improve the damping performance of chlorinated butyl rubber (CIIR). The results showed that the modification of G2 PAMAM by diphenolic acid can avoid its aggregation in the CIIR matrix. CIIR/G2 PAMAM-H nanocomposites exhibited high tan δ _max of 1.52 and wide damping temperature region of 140°C (tan δ > 0.55)at a very low loading (4.32 wt.%), which were strongerthan that of pure CIIR and CIIR/G2 PAMAM nanocomposites. In addition, these nanocomposites also exhibited a unique self-healing ability by multiple hydrogen bonds, which can effectively extend the life of the rubber material in actual production. Therefore, the dendrimer modification provided unique development opportunities for elastomers in certain highly engineered fields, such as vehicles, rail transit, aerospace, etc.

Conformation-Dependent Phosphorescence of Galactose-Decorated Phosphors and Assembling-Induced Phosphorescence Enhancement

Amorphous organic room-temperature phosphorescent (RTP) materials are promising for their facile preparation and processability, while the conformation effects of phosphors at amorphous state are lack of study in comparison with the rigid effects due to the commonly irregular assembling and dispersal of phosphors in rigid systems. Herein, we report a series of phosphorescent molecules modified by polyhydroxy galactose, whose RTP emission at the amorphous state can be regulated by controlling the conformational distortion of the phosphorescent segments. Further, a strong RTP emission is facilely obtained by the co-assembling between polyhydroxy phosphors and polyhydroxy matrices (α-CD, β-CD, and chitosan). Owing to the rigid effect of the enhanced hydrogen bonding cross-linking, the highest RTP quantum yield reaches 19.4%; whereas, the RTP emissions of assemblies become conformation insensitive. The conflicting relationship between the conformation effect and rigid effect is attributed to the differences between aggregated single-component systems and dispersed assembling systems. Besides, the unique and different moisture responsiveness of the co-assembling samples is discovered and further applied in data encryption. The research expands the scope for designing amorphous pure organic RTP materials with supramolecular strategies and shows a modularized approach for assembling-enhanced phosphorescence.

Bond-Breaking/Bond-Forming Reactions by Vibrational Excitation: Infrared-Induced Bidirectional Tautomerization of Matrix-Isolated Thiotropolone

Infrared vibrational excitation is a promising approach for gaining exceptional control of chemical reactions, in ways that cannot be attained via thermal or electronic excitation. Here, we report an unprecedented example of a bond-breaking/bond-forming reaction by vibrational excitation under matrix isolation conditions. Thiotropolone monomers were isolated in cryogenic argon matrices and characterized by infrared spectroscopy and vibrational computations (harmonic and anharmonic). Narrowband near-infrared irradiations tuned at frequencies of first CH stretching overtone (5940 cm^-1) or combination modes (5980 cm^-1) of the OH tautomer, the sole form of the compound that exists in the as-deposited matrices, led to its conversion into the SH tautomer. The tautomerization in the reverse direction was achieved by vibrational excitation of the SH tautomer with irradiation at 5947 or 5994 cm^-1, corresponding to the frequencies of its CH stretching combination and overtone modes. This pioneer demonstration of bidirectional hydroxyl ↔ thiol tautomerization controlled by vibrational excitation creates prospects for new advances in vibrationally induced chemistry.

The Prodigious Hydrogen Bonds with Sulfur and Selenium in Molecular Assemblies, Structural Biology, and Functional Materials

Hydrogen bonds (H-bonds) play important roles in imparting functionality to the basic molecules of life by stabilizing their structures and directing their interactions. Numerous studies have been devoted to understanding H-bonds involving highly electronegative atoms like nitrogen, oxygen, and halogens and consequences of those H-bonds in chemical reactions, catalysis, and structure and function of biomolecules; but the involvement of less electronegative atoms like sulfur and selenium in H-bond formation establishes the concept of noncanonical H-bonds. Initially belittled for the "weak" nature of their interactions, these perceptions have gradually evolved over time through dedicated efforts by several research groups. This has been facilitated by advancements in experimental methods for their detection through gas-phase laser spectroscopy and solution NMR spectroscopy, as well as through theoretical predictions from high level quantum chemical calculations.In this Account, we present insights into the versatility of the sulfur and selenium centered H-bonds (S/SeCHBs) by highlighting their multifarious applications in various fields from chemical reactions to optoelectronic properties to structural biology. Our group has highlighted the significance and strength of such H-bonds in natural and modified biomolecules. Here, we have reviewed several molecular assemblies, biomolecules, and functional materials, where the role of these H-bonds is pivotal in influencing biological functions. It is worth mentioning here that the precise experimental data obtained from gas-phase laser spectroscopy have contributed considerably to changing the existing perceptions toward S/SeCHBs. Thus, molecular beam experiments, though difficult to perform on smaller model thio- or seleno-substituted Molecules, etc. (amides, nucleobases, drug molecules), are inevitable to gather elementary knowledge and convincing concepts on S/SeCHBs that can be extended from a small four-atom sulfanyl dimer to a large 14 kDa iron-sulfur protein, ferredoxin. These H-bonds can also tailor a fascinating array of molecular frameworks and design supramolecular assemblies by inter- and intralinking of individual "molecular Lego-like" units.The discussion is indeed intriguing when it turns to the usage of S/SeCHBs in facile synthetic strategies like tuning regioselectivity in reactions, as well as invoking phenomena like dual phosphorescence and chemiluminescence. This is in addition to our investigations of the dispersive nature of the hydrogen bond between metal hydrides and sulfur or selenium as acceptor, which we anticipate would lead to progress in the areas of proton and hydride transfer, as well as force-field design. This Account demonstrates how ease of fabrication, enhanced efficiency, and alteration of physicochemical properties of several functional materials is facilitated owing to the presence of S/SeCHBs. Our efforts have been instrumental in the evaluation of various S/SeCHBs in flue gas capture, as well as design of organic energy harvesting materials, where dipole moment and polarizability have important roles to play. We hope this Account invokes newer perspectives with regard to how H-bonds with sulfur and selenium can be adequately adopted for crystal engineering, for more photo- and biophysical studies with different spectroscopic methods, and for developing next-generation field-effect transistors, batteries, superconductors, and organic thin-film transistors, among many other multifunctional materials for the future.

Dual Emission: Classes, Mechanisms, and Conditions

There has been much interest in dual-emission materials in the past few years for materials and life science applications; however, a systematic overview of the underlying processes is so-far missing. We resolve this issue herein by classifying dual-emission (DE) phenomena as relying on one emitter with two emitting states (DE1), two independent emitters (DE2), or two correlated emitters (DE3). Relevant DE mechanisms for materials science are then briefly described together with the electronic and/or geometrical conditions under which they occur. For further reading, references are given that offer detailed insight into the complex mechanistic aspects of the various DE processes or provide overviews on materials families or their applications. By avoiding ambiguities and misinterpretations, this systematic, insightful Review might inspire future targeted designs of DE materials.

Enhanced Long Persistent Luminescence by Multifold Interpenetration in Metal-Organic Frameworks

Metal-organic frameworks (MOFs) with long persistent luminescence (LPL) have attracted widespread attention due to potential applications in displays, anticounterfeiting, and so on. However, MOFs often have large pore size, which restricts the formation of efficient inter- and intramolecular interactions to realize LPL. Herein, a new approach to achieving LPL in MOFs by multifold interpenetration of discrete frameworks is reported. By comparison between threefold- and twofold-interpenetrating MOFs, it was found that the former, which have higher multiplicity and denser frameworks, can be endowed with enhanced inter- and intramolecular interactions, and thus enhanced LPL is obtained. Meanwhile, metal-cluster and heavy-halogen effects could also cause variations in LPL duration and color.

Perylene Bisimide and Naphthyl-Based Molecular Dyads: Hydrogen Bonds Driving Co-planarization and Anomalous Temperature-Response Fluorescence

The origin of the positive temperature effect in fluorescence emission of a newly designed perylene bisimide (PBI) derivative with two naphthyl units containing ortho-methoxy group (NM) at its bay positions (PBI-2NM) was elucidated. A key point is the finding of a weak hydrogen bond (<5.0 kcal mol^-1 ) between the methoxy group of the NM unit and a nearby hydrogen atom of the PBI core. It is the bonding that drives co-planarization of the different aromatic units, resulting in delocalization of the π-electrons of the compound as synthesized, inducing fluorescence quenching via intramolecular charge transfer (ICT). With increasing temperature, the co-planar structure could be distorted in part, resulting in a decreased degree of ICT, and hence leading to enhanced fluorescence emission. The unique positive temperature effect in emission induced by H-bond-driven co-planarization may pave a new avenue in designing functional molecular systems complementary to conventional methods.

(Z)-Selective anti-Markovnikov or Markovnikov thiol-yne-click reactions of an internal alkyne by amide hydrogen bond control

Herein, we show exclusive control of stereo and regioselective thiol-yne click (TYC) reactions of internal alkynes via amide hydrogen bond control. By exploiting appropriate hydrogen bonding interactions like N-HS, N-HN and C-HO, either (Z)-selective anti-Markovnikov or Markovnikov products could be obtained for an internal alkyne, exclusively.

Proton-Activated Amorphous Room-Temperature Phosphorescence for Humidity Sensing and High-Level Data Encryption

Supramolecular co-assembling terpyridine-derivatives with nanoclay (LP) are exploited to acquire efficient amorphous room-temperature phosphorescence (RTP). Experimental and theoretical investigations reveal that this co-assembly not only brings about a configuration transformation from the trans-trans (a) to the cis-trans (a'') form via the protonating process, significantly narrowing the singlet-triplet energy gap, thereby effectively facilitating the single-triplet ISC processes, but also well protects the triplet state and suppresses the nonradiative transitions via restricting molecular rotation and vibration by the hydrogen-bond interactions between them. Additionally, the flexible and transparent films, through co-assembling 1@LP (or 2@LP) with polyvinyl alcohol (PVA), also display excellent phosphorescence performance. Owing to their distinctive RTP performances, the RH sensing and high-level data encryption are achieved.

9,9-Dimethylxanthene Derivatives with Room-Temperature Phosphorescence: Substituent Effects and Emissive Properties

Room-temperature phosphorescence (RTP) emitters with ultralong lifetimes are emerging as attractive targets because of their potential applications in bioimaging, security, and other areas. But their development is limited by ambiguous mechanisms and poor understanding of the correlation of the molecular structure and RTP properties. Herein, different substituents on the 9,9-dimethylxanthene core (XCO) result in compounds with RTP lifetimes ranging from 52 to 601 ms, which are tunable by intermolecular interactions and molecular configurations. XCO-PiCl shows the most persistent RTP because of its reduced steric bulk and multiple sites of the 1-chloro-2-methylpropan-2-yl (PiCl) moiety for forming intermolecular interactions in the aggregated state. The substituent effects reported provide an efficient molecular design of organic RTP materials and establishes relationships among molecular structures, intermolecular interactions, and RTP properties.