Capping Strategies for Covalent Template-Directed Synthesis of Linear Oligomers Using CuAAC

Cooperativity in the assembly of H-bonded duplexes of synthetic recognition-encoded melamine oligomers

Recognition-encoded melamine oligomers (REMO) are synthetic polymers composed of repeating triazine-piperazine units and equipped with phenol and phosphine oxide side-chains. Short oligomers have previously been shown to form length- and sequence-selective H-bonded duplexes in non-polar solvents. Here, automated solid phase synthesis was used to prepare homo-sequence REMO with either twelve phenol recognition units or twelve phosphine oxide recognition units. The ends of the oligomers were functionalised with an azide and an alkyne group to allow investigation of duplex formation by covalent trapping with copper-catalysed azide-alkyne cycloaddition (CuAAC) reactions. The oligomers were also functionalised with a dansyl fluorophore or a dabcyl quencher dye to allow investigation of duplex formation by Förster resonance energy transfer (FRET). Covalent trapping showed that the duplex is the major species present in a 1 : 1 mixture of the phenol 12-mer and phosphine oxide 12-mer at micromolar concentrations in dichloromethane. FRET titration experiments showed that the association constant for duplex formation is greater than 108 M-1 in chloroform, and DMSO denaturation experiments showed that duplex formation is highly cooperative. The Hill coefficient for denaturation of the 12-mer duplex was 4.6, which is significantly higher than the value measured for the corresponding 6-mer duplex (1.9). This behaviour mirrors that observed for nucleic acid duplexes, where denaturation becomes increasingly cooperative as more base-pairs are added to the duplex.

Covalent Template-Directed Synthesis: A Powerful Tool for the Construction of Complex Molecules

Template-directed synthesis has become a powerful methodology to access complex molecules. Noncovalent templating has been widely used in the last few decades, but less attention has been paid to covalent template-directed synthesis, despite the fact that this methodology was used for the first reported synthesis of a catenane. This review highlights the evolution of covalent templating over the last 60 years, thereby providing a toolbox for the design of efficient covalent templating processes. Covalent templating represents a useful synthetic tool for accessing complex molecules, and the examples described here include the synthesis of macrocycles, mechanically interlocked molecules, linear oligomers, polydisperse linear polymers, and cross-linked polymer networks.

Surface Functionalization of Elastomers with Biopolymers

Biopolymer coatings on elastomeric surfaces have significant impact for advancements in biomedicine as they combine flexible devices with complex biological functionality. Biopolymers offer increased ability for antimicrobial coatings, sensing of relevant biological markers, and controlled drug delivery. The methodologies available to conjugate these important biopolymers to flexible elastomeric substrates are vast and rapidly evolving. This chapter aims to compile methodologies across the application space of biopolymer conjugation to elastomers. We present a guide to the field and methods ranging from surface activation and functionalization, grafting-to and grafting-from of biopolymers, and characterization of the resulting substrates.

Length and Sequence-Selective Polymer Synthesis Templated by a Combination of Covalent and Noncovalent Base-Pairing Interactions

Information can be encoded and stored in sequences of monomer units organized in linear synthetic polymers. Replication of sequence information is of fundamental importance in biology; however, it represents a challenge for synthetic polymer chemistry. A combination of covalent and noncovalent base pairs has been used to achieve high-fidelity templated synthesis of synthetic polymers that encode information as a sequence of different side-chain recognition units. Dialkyne building blocks were attached to the template by using ester base pairs, and diazide building blocks were attached to the template by using H-bond base pairs. Copper-catalyzed azide-alkyne cycloaddition reactions were used to zip up the copy strand on the template, and the resulting duplex was cleaved by hydrolyzing the covalent ester base pairs. By using recognition-encoded melamine oligomers with either three phosphine oxide or three 4-nitrophenol recognition units to form the noncovalent base pairs, exceptionally high affinities of the diazides for the template were achieved, allowing the templated polymerization step to be carried out at low concentrations, which promoted on-template intramolecular reactions relative to competing intermolecular processes. Two different templates, a 7-mer and an 11-mer, were used in the three-step reaction sequence to obtain the sequence-complementary copy strands with minimal amounts of side reaction.

Selective Duplex Formation in Mixed Sequence Libraries of Synthetic Polymers

Recognition-encoded melamine oligomers (REMO) are synthetic polymers that feature an alternating 1,3,5-triazine-piperazine backbone and side-chains equipped with either a phenol or phosphine oxide recognition unit. An automated method for the solid-phase synthesis (SPS) of REMO of any specified sequence has been developed starting from dichlorotriazine monomer building blocks. Complementary homo-oligomers with either six phenols or six phosphine oxides were synthesized and shown to form a stable duplex in nonpolar solvents by NMR denaturation experiments. The duplex was covalently trapped by equipping the ends of the oligomers with an azide and an alkyne group and using a copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction. The SPS methodology was adapted to synthesize mixed sequence libraries by using a mixture of two different dichlorotriazine building blocks in each coupling cycle of an oligomer synthesis. The resulting libraries contain statistical mixtures of all possible sequences. The self-assembly properties of these libraries were screened by using the CuAAC reaction to trap any duplexes present. In mixed sequence libraries of 6-mers, the trapping experiments showed that only sequence-complementary oligomers formed duplexes at micromolar concentrations in dichloromethane. The automated synthesis approach developed here provides access to large libraries of mixed sequence synthetic polymers, and the covalent trapping experiment provides a convenient tool for screening functional properties of mixtures. The results suggest high-fidelity sequence-selective duplex formation in mixtures of 6-mer sequences of the REMO architecture.

Dynamic covalent synthesis

Dynamic covalent synthesis aims to precisely control the assembly of simple building blocks linked by reversible covalent bonds to generate a single, structurally complex, product. In recent years, considerable progress in the programmability of dynamic covalent systems has enabled easy access to a broad range of assemblies, including macrocycles, shape-persistent cages, unconventional foldamers and mechanically-interlocked species (catenanes, knots, etc.). The reversibility of the covalent linkages can be either switched off to yield stable, isolable products or activated by specific physico-chemical stimuli, allowing the assemblies to adapt and respond to environmental changes in a controlled manner. This activatable dynamic property makes dynamic covalent assemblies particularly attractive for the design of complex matter, smart chemical systems, out-of-equilibrium systems, and molecular devices.

Replication of synthetic recognition-encoded oligomers by ligation of trimer building blocks

The development of methods for replication of synthetic information oligomers will underpin the use of directed evolution to search new chemical space. Template-directed replication of triazole oligomers has been achieved using a covalent primer in conjunction with non-covalent binding of complementary building blocks. A phenol primer equipped with an alkyne was first attached to a benzoic recognition unit on a mixed sequence template via selective covalent ester base-pair formation. The remaining phenol recognition units on the template were then used for non-covalent binding of phosphine oxide oligomers equipped with an azide. The efficiency of the templated CuAAC reaction between the primer and phosphine oxide building blocks was investigated as a function of the number of H-bonds formed with the template. Increasing the strength of the non-covalent interaction between the template and the azide lead to a significant acceleration of the templated reaction. For shorter phosphine oxide oligomers intermolecular reactions compete with the templated process, but quantitative templated primer elongation was achieved with a phosphine oxide 3-mer building block that was able to form three H-bonds with the template. NMR spectroscopy and molecular models suggest that the template can fold, but addition of the phosphine oxide 3-mer leads to a complex with three H-bonds between phosphine oxide and phenol groups, aligning the azide and alkyne groups in a favourable geometry for the CuAAC reaction. In the product duplex, 1H and 31P NMR data confirm the presence of the three H-bonded base-pairs, demonstrating that the covalent and non-covalent base-pairs are geometrically compatible. A complete replication cycle was carried out starting from the oligotriazole template by covalent attachment of the primer, followed by template-directed elongation, and hydrolysis of the the ester base-pair in the resulting duplex to regenerate the template and liberate the copy strand. We have previously demonstrated sequence-selective oligomer replication using covalent base-pairing, but the trimer building block approach described here is suitable for replication of sequence information using non-covalent binding of the monomer building blocks to a template.

Effect of backbone flexibility on covalent template-directed synthesis of linear oligomers

Covalent template-directed synthesis can be used to replicate synthetic oligomers, but success depends critically on the conformational properties of the backbone. Here we investigate how the choice of monomer building block affects the flexibility of the backbone and in turn the efficiency of the replication process for a series of different triazole oligomers. Two competing reaction pathways were identified for monomers attached to a template, resulting in the formation of either macrocyclic or linear products. For flexible backbones, macrocycles and linear oligomers are formed at similar rates, but a more rigid backbone gave exclusively the linear product. The experimental results are consistent with ring strain calculations using molecular mechanics: products with low ring strain (20-30 kJ mol^-1) formed rapidly, and products with high ring strain (>100 kJ mol^-1) were not observed. Template-directed replication of linear oligomers requires monomers that rigid enough to prevent the formation of undesired macrocycles, but not so rigid that the linear templating pathway leading to the duplex is inhibited. Molecular mechanics calculations of ring strain provide a straightforward tool for assessing the flexibility of potential backbones and the viability different monomer designs before embarking on synthesis.

Replication of a synthetic oligomer using chameleon base-pairs

Salt bridges were used to attach polymerisable amidine monomers to an oligomeric benzoic acid template. CuAAC oligomerisation reactions in the presence of a benzoic acid 3-mer template gave the amidine 3-mer copy as the major product. Cleavage of ester linkers was used to hydrolyse off the amidine recognition units and convert the product into a benzoic acid 3-mer copy of the original template.

H-Bond Templated Oligomer Synthesis Using a Covalent Primer

Template-directed synthesis of nucleic acids in the polymerase chain reaction is based on the use of a primer, which is elongated in the replication process. The attachment of a high affinity primer to the end of a template chain has been implemented for templating the synthesis of triazole oligomers. A covalent ester base-pair was used to attach a primer to a mixed sequence template. The resulting primed template has phenol recognition units on the template, which can form noncovalent base-pairs with phosphine oxide monomers via H-bonding, and an alkyne group on the primer, which can react with the azide group on a phosphine oxide monomer. Competition reactions between azides bearing phosphine oxide and phenol recognition groups were used to demonstrate a substantial template effect, due to H-bonding interactions between the phenols on the template and phosphine oxides on the azide. The largest rate acceleration was observed when a phosphine oxide 2-mer was used, because this compound binds to the template with a higher affinity than compounds that can only make one H-bond. The 31P NMR spectrum of the product duplex shows that the H-bonds responsible for the template effect are present in the product, and this result indicates that the covalent ester base-pairs and noncovalent H-bonded base-pairs developed here are geometrically compatible. Following the templated reaction, it is possible to regenerate the template and liberate the copy strand by hydrolysis of the ester base-pair used to attach the primer, thus completing a formal replication cycle.

An Orthogonal Dynamic Covalent Chemistry Tool for Ring-Opening Polymerization of Cyclic Oligochalcogenides on Detachable Helical Peptide Templates

A model system is introduced as a general tool to elaborate on orthogonal templation of dynamic covalent ring-opening polymerization (ODC-TROP). The tool consists of 310 helical peptides as unprecedented templates and semicarbazones as orthogonal dynamic covalent linkers. With difficult-to-control 1,2-dithiolanes, ODC-TROP on the level of short model oligomers occurs with high templation efficiency, increasing and diminishing upon helix stabilization and denaturation, respectively. Further, an anti-templated conjugate with mispositioned monomers gave reduced templation upon helix twisting. Even with the "unpolymerizable" 1,2-diselenolanes, initial studies already afford mild templation efficiency. These proof-of-principle results promise that the here introduced tool, recyclable and enabling late-stage side chain modification, will be useful to realize ODC-TROP of intractable or unknown cyclic dynamic covalent monomers for dynamer materials as well as cellular uptake and signaling applications.

Supramolecular template-directed synthesis of triazole oligomers

Sandwich complexes formed by two zinc porphyrins and a diamine ligand (DABCO) have been used as a supramolecular template to direct the synthesis of triazole oligomers. Monomer units equipped with two polymerizable functional groups, an alkyne and an azide, were attached to the template via ester bonds between a phenol unit on the monomer and benzoic acid units on the porphyrin. Self-assembly of the zinc porphyrins by addition of DABCO led to a supramolecular complex containing four of the monomer units, two on each porphyrin. CuAAC oligomerisation was carried out in the presence of a chain capping agent to prevent intermolecular reactions between the templated products, which carry reactive chain ends. The templated-directed oligomerisation resulted in selective formation of a duplex, which contains two identical chains of triazole oligomers connecting the porphyrin linkers. The effective molarity for the intramolecular CuAAC reactions on the template is 3–9 mM, and because the triazole backbone has a direction, the product duplex was obtained as a 4 : 1 mixture of the parallel and antiparallel isomers. Hydrolysis of the ester bonds connecting the oligomers to the template gave a single product, the phenol 2-mer, in excellent yield. The introduction of a supramolecular element into the template considerably broadens the scope of the covalent template-directed oligomerisation methodology that we previously developed for the replication of sequence information in synthetic oligomers.

A supramolecular metalloporphyrin assembly was used as a disposable template for controlling the oligomerisation of covalently attached monomer building blocks to give a linear oligomeric product that is not accessible via untemplated reactions.

Covalently Templated Syntheses of Mechanically Interlocked Molecules

Mechanically interlocked molecules (MiMs), such as catenanes and rotaxanes, exhibit unique properties due to the mechanical bond which unites their components. The translational and rotational freedom present in these compounds may be harnessed to create stimuli-responsive MiMs, which find potential application as artificial molecular machines. Mechanically interlocked structures such as lasso peptides have also been found in nature, making MiMs promising albeit elusive targets for drug discovery. Although the first syntheses of MiMs were based on covalent strategies, approaches based on non-covalent interactions rose to prominence thereafter and have remained dominant. Non-covalent strategies are generally short and efficient, but do require particular structural motifs which are difficult to alter. In a covalent approach, MiMs can be more easily modified while the components may have increased rotational and translational freedom. Both approaches have complementary merits and combining the unmatched efficiency of non-covalent approaches with the scope of covalent syntheses may open up vast opportunities. In this review, recent covalently templated syntheses of MiMs are discussed to show their complementarity and anticipate future developments in this field.

1 Introduction

2 Tetrahedral Templates

2.1 A Carbonate Template for Non-Rusty Catenanes

2.2 All-Benzene Catenanes on a Silicon Template

2.3 Backfolding from Quaternary Carbon

3 Planar Templates

3.1 Rotaxanes Constructed in a Ring

3.2 Hydrindacene as a Dynamic Covalent Template

3.3 Templating on Tri- and Tetrasubstituted Benzenes

4 Conclusion

Easily Functionalized and Readable Sequence-Defined Polytriazoles

Developing sequence-defined skeletons that could be conveniently characterized and functionalized with diverse side groups is attractive but challenging. Here we report one novel sequence-defined polytriazole structure bearing side groups at its triazole rings. Its construction was facilely accessed by the iterative employments of azidation and iridium-catalyzed cycloaddition of azide with internal 1-thioalkyne (IrAAC) in solution phase. The easy preparation of 1-thioalkyne monomers and the excellent tolerance of IrAAC enable the introduction of diverse functional side chains to this architecture. The obtained sequence was effectively characterized by tandem mass spectrometry owing to the efficient fractures of both of the Csp³-S and Csp³-N bonds in its backbone, indicating its potential utilization in high-capacity digital polymer developments. Further successful application of this structure in building monodisperse macromolecules exhibiting aggregation-induced emission (AIE) characteristics demonstrates its expected application in functional material fabrications.

Replication of Sequence Information in Synthetic Oligomers

The holy grail identified by Orgel in his 1995 Account was the development of novel chemical systems that evolve using reactions in which replication and information transfer occur together. There has been some success in the adaption of nucleic acids to make artificial analogues and in templating oligomerization reactions to form synthetic homopolymers, but replication of sequence information in synthetic polymers remains a major unsolved problem. In this Account, we describe our efforts in this direction based on a covalent base-pairing strategy to transfer sequence information between a parent template and a daughter copy. Oligotriazoles, which carry information as a sequence of phenol and benzoic acid side chains, have been prepared from bifunctional monomers equipped with an azide and an alkyne. Formation of esters between phenols and benzoic acids is used as the equivalent of nucleic base pairing to covalently attach monomer building blocks to a template oligomer. Sequential protection of the phenol side chains on the template, ester coupling of the benzoic acid side chains, and deprotection and ester coupling of the phenol side chains allow quantitative selective base-pair formation on a mixed sequence template. Copper catalyzed azide alkyne cycloaddition (CuAAC) is then used to oligomerize the monomers on the template. Finally, cleavage of the ester base pairs in the product duplex by hydrolysis releases the copy strand. This covalent template-directed synthesis strategy has been successfully used to copy the information encoded in a trimer template into a sequence-complementary oligomer in high yield.The use of covalent base pairing provides opportunities to manipulate the nature of the information transferred in the replication process. By using traceless linkers to connect the phenol and benzoic acid units, it is possible to carry out direct replication, reciprocal replication, and mutation. These preliminary results are promising, and methods have been developed to eliminate some of the side reactions that compete with the CuAAC process that zips up the duplex. In situ end-capping of the copy strand was found to be an effective general method for blocking intermolecular reactions between product duplexes. By selecting an appropriate concentration of an external capping agent, it is also possible to intercept macrocyclization of the reactive chain ends in the product duplex. The other side reaction observed is miscoupling of monomer units that are not attached to adjacent sites on the template, and optimization is required to eliminate these reactions. We are still some way from an evolvable synthetic polymer, but the chemical approach to molecular replication outlined here has some promise.

Controlled mutation in the replication of synthetic oligomers

Replication of sequence information with mutation is the molecular basis for the evolution of functional biopolymers. Covalent template-directed synthesis has been used to replicate sequence information in synthetic oligomers, and the covalent base-pairs used in these systems provide an opportunity to manipulate the outcome of the information transfer process through the use of traceless linkers. Two new types of covalent base-pair have been used to introduce mutation in the replication of an oligotriazole, where information is encoded as the sequence of benzoic acid and phenol monomer units. When a benzoic acid-benzoic acid base-pairing system was used, a direct copy of a benzoic acid homo-oligomer template was obtained. When a phenol-benzoic acid base-pairing system was used, a reciprocal copy, the phenol homo-oligomer, was obtained. The two base-pairing systems are isosteric, so they can be used interchangeably, allowing direct and reciprocal copying to take place simultaneously on the same template strand. As a result, it was possible to introduce mutations in the replication process by spiking the monomer used for direct copying with the monomer used for reciprocal copying. The mutation rate is determined precisely by the relative proportions of the two monomers. The ability to introduce mutation at a controlled rate is a key step in the development of synthetic systems capable of evolution, which requires replication with variation.

IrAAC-based construction of dual sequence-defined polytriazoles

One novel dual sequence-defined polytriazole structure was facilely achieved through an IrAAC-based iterative sequential growth strategy.

1,2,3-Triazole-based sequence-defined oligomers and polymers

This review offers a summary on the advances in the construction of 1,2,3-triazole-based sequence-defined oligomers and polymers through MAAC-based ISG or IEG strategies.

Discrete multifunctional sequence-defined oligomers with controlled chirality

New synthetic strategy leading to discrete poly(triazole-urethane) oligomers with a large range of functional side groups, programmable stereochemistry and sequentiality.

Two-component assembly of recognition-encoded oligomers that form stable H-bonded duplexes

Imine chemistry was used to assemble oligomers displaying phenol and phosphine oxide side chains that selectively base-pair to give duplexes, which are stable in chloroform solution.

A new family of recognition-encoded oligomers that form stable duplexes in chloroform have been prepared. Monomer building blocks composed of dialdehydes functionalised with either a trifluoromethylphenol or phosphine oxide H-bond recognition unit were prepared. The dialdehydes were coupled with diamines by imine formation and then reduction to give homo-oligomers between one and three recognition units in length. Duplex formation was characterised by ¹⁹F and ¹H NMR titration experiments in toluene and in chloroform. For duplexes formed between length complementary H-bond donor and acceptor homo-oligomers, an order of magnitude increase in stability was observed for every base-pair added to the duplex in chloroform. The effective molarity for the intramolecular H-bonds responsible for zipping up the duplex is 30 mM, which results in the fully assembled duplex in all cases. The uniform increase in duplex stability with oligomer length suggests that the backbone structure and geometry is likely to be compatible with the formation of extended duplexes in longer oligomers.

Molecular replication using covalent base-pairs with traceless linkers

A unique feature of kinetically inert covalent base-pairing is that the nature of the chemical information that is transferred can be modulated by changing the chemical connectivity between the two bases. Formation of esters between phenols and benzoic acids has been used as a base-pairing strategy for sequence information transfer in template-directed synthesis of linear oligomers, but the copy strand produced by this process has the complementary sequence to the template strand. It is possible to form a base-pair between two benzoic acids by using a hydroquinone linker, which is eliminated when the product duplex is hydrolysed. Using this approach, covalent template-directed synthesis was carried out using a benzoic acid 3-mer template to produce an identical copy. This direct replication process was used in iterative rounds of replication leading to an increase of the population of the copied oligomer.

Cap control: cyclic versus linear oligomerisation in covalent template-directed synthesis

Covalent template-directed synthesis was used to oligomerise monomer building blocks in a controlled manner to give exclusively the linear trimer. Competing reaction pathways were blocked by addition of a large excess of a monomeric capping agent. At a concentration of 1 mM, the cap selectively prevented further reaction of the product chain ends to give polymeric and macrocyclic products, but did not interfere with the templating process.

The right concentration of capping agent is required to control the product distribution in covalent template-directed synthesis of linear oligomers using CuAAC.