Acid Catalysis with Alkane/Water Microdroplets in Ionic Liquids

A Sequential Catalytic Carbonation-Hydrolysis-Diol Dehydrogenation Reaction of Epoxides

The design of cascade reactions in synthetic programs is of interest, particularly if the individual steps involve catalyzed reactions, and simple and highly available molecules such as carbon dioxide (CO2), water (H2O), and dihydrogen (H2) are employed. Herein, a three-step sequential reaction is shown from epoxides to dehydrogenated diols, catalyzed by a combination of commercially available ionic liquids and supported Pt species on charcoal (Pt/C) in low amounts (<0.05 mol%). The process involves first carbonation of epoxides with CO2, followed by the opening of the carbonate with H2O, and then an acceptor-less dehydrogenation reaction of the resulting diol to release H2. The inclusion of this last step in the one-pot synthesis of diols from epoxides is, to the knowledge, unprecedented. Reactive and kinetic experiments for each individual step reveal the key role of CO2 to avoid epoxide polymerizations and enable the synthesis of a clean diol for the final dehydrogenation reaction.

The synergistic effect induced by "Z-bond" between cations and anions achieving a highly reversible zinc anode

Due to their high energy density, low cost, and environmental friendliness, aqueous zinc-ion batteries are considered a potential alternative to Li-ion batteries. However, dendrite growth and parasitic reactions of water molecules limit their practical applications. Herein, an ionic liquid additive, 1-butyl-3-methylimidazolium Bis(fluorosulfonyl)imide (BMImFSI), is introduced to regulate the electrical double layer (EDL). Both BMIm+ and FSI- can preferentially adsorb on the Zn anode, constructing a water-poor EDL and thus effectively suppressing side reactions. Additionally, under the synergistic effect of the mineralized solid-electrolyte interphase (SEI) formed by the decomposition of FSI- and the ion dispersion layer constructed by BMIm+ on the mineralized SEI, the deposition of zinc ions is effectively dispersed, preventing excessive aggregation of zinc ions and thus dendrite formation. The Zn‖Zn symmetric cells using the BMImFSI/ZnSO4 electrolyte operate stably for 1060 h and 560 h at 10 mA cm-2-10 mAh cm-2 and 20 mA cm-2-20 mAh cm-2, respectively. The Zn‖Cu asymmetric cell maintains an average Coulombic efficiency of 99.4 % after 1000 cycles. The capacity retention of a full cell using α-MnO2 as the cathode is significantly improved at 1 A g-1.

Revealing the Mechanism of Combining Best Properties of Homogeneous and Heterogeneous Catalysis in Hybrid Pd/NHC Systems

The formation of transient hybrid nanoscale metal species from homogeneous molecular precatalysts has been demonstrated by in situ NMR studies of catalytic reactions involving transition metals with N-heterocyclic carbene ligands (M/NHC). These hybrid structures provide benefits of both molecular complexes and nanoparticles, enhancing the activity, selectivity, flexibility, and regulation of active species. However, they are challenging to identify experimentally due to the unsuitability of standard methods used for homogeneous or heterogeneous catalysis. Utilizing a sophisticated solid-state NMR technique, we provide evidence for the formation of NHC-ligated catalytically active Pd nanoparticles (PdNPs) from Pd/NHC complexes during catalysis. The coordination of NHCs via C(NHC)-Pd bonding to the metal surface was first confirmed by observing the Knight shift in the 13C NMR spectrum of the frozen reaction mixture. Computational modeling revealed that as little as few NHC ligands are sufficient for complete ligation of the surface of the formed PdNPs. Catalytic experiments combined with in situ NMR studies confirmed the significant effect of surface covalently bound NHC ligands on the catalytic properties of the PdNPs formed by decomposition of the Pd/NHC complexes. This observation shows the crucial influence of NHC ligands on the activity and stability of nanoparticulate catalytic systems.

Ionic Liquids in Metal, Photo-, Electro-, and (Bio) Catalysis

Ionic liquids (ILs) have unique physicochemical properties that make them advantageous for catalysis, such as low vapor pressure, non-flammability, high thermal and chemical stabilities, and the ability to enhance the activity and stability of (bio)catalysts. ILs can improve the efficiency, selectivity, and sustainability of bio(transformations) by acting as activators of enzymes, selectively dissolving substrates and products, and reducing toxicity. They can also be recycled and reused multiple times without losing their effectiveness. ILs based on imidazolium cation are preferred for structural organization aspects, with a semiorganized layer surrounding the catalyst. ILs act as a container, providing a confined space that allows modulation of electronic and geometric effects, miscibility of reactants and products, and residence time of species. ILs can stabilize ionic and radical species and control the catalytic activity of dynamic processes. Supported IL phase (SILP) derivatives and polymeric ILs (PILs) are good options for molecular engineering of greener catalytic processes. The major factors governing metal, photo-, electro-, and biocatalysts in ILs are discussed in detail based on the vast literature available over the past two and a half decades. Catalytic reactions, ranging from hydrogenation and cross-coupling to oxidations, promoted by homogeneous and heterogeneous catalysts in both single and multiphase conditions, are extensively reviewed and discussed considering the knowledge accumulated until now.

Are nature's strategies the solutions to the rational design of low-melting, lipophilic ionic liquids?

Ionic liquids (ILs) have emerged as a new class of materials, displaying a unique capability to self-assemble into micelles, liposomes, liquid crystals, and microemulsions. Despite evident interest, advancements in the controlled formation of amphiphilic ILs remain in the early stages. Taking inspiration from nature, we introduced the concept of lipid-like (or lipid-inspired) ILs more than a decade ago, aiming to create very low-melting, highly lipophilic ILs that are potentially bio-innocuous - a combination of attributes that is frequently antithetical but highly desirable from several application-specific standpoints. Lipid-like ILs are a subclass of functional organic liquid salts that include a range of lipidic side chains such as saturated, unsaturated, linear, branched, and thioether while retaining melting points below room temperature. It was observed in several homologous series of [Cnmim] ILs that elongation of N-appended alkyl chains to greater than seven carbons leads to a substantial increase in melting point (Tm) - which is the most characteristic feature of ILs. Accordingly, it is challenging to develop ILs with low Tm values while preserving their hydrophobicity and self-organizing properties. We found that two alternative Tm depressive approaches are useful. One of these is the replacement of the double bonds with thioether moieties in the alkyl chains, as detailed in several published papers detailing the chemistry of these ILs. Employing thiol-ene and thiol-yne click reactions is a facile, robust, and orthogonal method to overcome the challenges associated with the synthesis of alkyl thioether-functionalized ILs. The second approach involves replacing the double bonds with the cisoid cyclopropyl motif, mimicking the strategy used by certain organisms to modulate cell membrane fluidity. This discovery has the potential to greatly impact the utilization of lipid-like ILs in various applications, including gene delivery, lubricants, heat transfer fluids, and haloalkane separations, among others. This feature article presents a concise, historical overview, highlighting key findings from our work while offering speculation about the future trajectory of this de novo class of soft organic-ion materials.

An Unusual Microdomain Factor Controls Interaction of Organic Halides with the Palladium Phase and Influences Catalytic Activity in the Mizoroki-Heck Reaction

In this work, using a combination of scanning and transmission electron microscopy (SEM and TEM), the transformations of palladium-containing species in imidazolium ionic liquids in reaction mixtures of the Mizoroki-Heck reaction and in related organic media are studied to understand a challenging question of the relative reactivity of organic halides as key substrates in modern catalytic technologies. The microscopy technique detects the formation of a stable nanosized palladium phase under the action of an aryl (Ar) halide capable of forming microcompartments in an ionic liquid. For the first time, the correlation between the reactivity of the aryl halide and the microdomain structure is observed: Ar-I (well-developed microdomains) > Ar-Br (microphase present) > Ar-Cl (minor amount of microphase). Previously, it is assumed that molecular level factors, namely, carbon-halogen bond strength and the ease of bond breakage, are the sole factors determining the reactivity of aryl halides in catalytic transformations. The present work reports a new factor connected with the nature of the organic substrates used and their ability to form a microdomain structure and concentrate metallic species, highlighting the importance of considering both the molecular and microscale properties of the reaction mixtures.

Functionalization of polyethylene with hydrolytically-stable ester groups

Low-density (LD) and high-density polyethylene (HDPE), recycled or not, incorporates up to 7 wt% of ester groups after reacting either with ethyl diazoacetate (EDA) under catalytic and solvent free-reaction conditions, or with maleic anhydride (MA) and acrylates (AC) under catalytic radical conditions. The resulting upcycled polyethylene esters are hydrolytically stable at extreme pH (0-14) and can be further transformed into carboxylic acids, carboxylates, other esters and amides.

Insights into Ionic Liquids: From Z-Bonds to Quasi-Liquids

Ionic liquids (ILs) hold great promise in the fields of green chemistry, environmental science, and sustainable technology due to their unique properties, such as a tailorable structure, the various types available, and their environmentally friendly features. On the basis of multiscale simulations and experimental characterizations, two unique features of ILs are as follows: (1) strong coupling interactions between the electrostatic forces and hydrogen bonds, namely in the Z-bond, and (2) the unique semiordered structure and properties of ultrathin films, specifically regarding the quasi-liquid. In accordance with the aforementioned theoretical findings, many cutting-edge applications have been proposed: for example, CO₂ capture and conversion, biomass conversion and utilization, and energy storage materials. Although substantial progress has been made recently in the field of ILs, considerable challenges remain in understanding the nature of and devising applications for ILs, especially in terms of e.g. in situ/real-time observation and highly precise multiscale simulations of the Z-bond and quasi-liquid. In this Perspective, we review recent developments and challenges for the IL research community and provide insights into the nature and function of ILs, which will facilitate future applications.

Nanoscale Advancement Continues-From Catalysts and Reagents to Restructuring of Reaction Media

Comprehensive studies dedicated to the search for specific properties of matter at the micro- and nanoscales have greatly enriched the fields of chemistry and materials science. From the point of view of synthetic chemistry, discoveries in the field of nanoscale catalysis, in which the size effects of active centers are used to accelerate the reactions, are of particular importance. However, another approach for the promotion of chemical transformations based on the micro- or nanoconfinement of reacting molecules or even on the structuring of the reaction media as a whole is gaining interest as a highly valuable tool. Herein, we highlight the example of an increase in the efficiency of phenol alkylation and tert-butylation of benzyl alcohol in reaction media based on ionic liquids by the creation of acidic microdomains in the presence of small molecule additives.