Fast screening method for volatile compounds of oak wood used for aging wines by headspace SPME-GC-MS (SIM)

Volatile Compound Release from Oak Chips in Model Wine Media: Combined Influence of Toasting Degree, Size, Time of Contact, and Ethanol Content

The effects of size, toasting degree, and time of contact on the release of volatile compounds from Quercus alba (L.) chips during a simulated fermentation and post-fermentative process were studied. The results obtained indicated that the large-size chips favored the release of furfural and furfuryl alcohol, while the small ones increased the concentration of cyclotene and maltol. The interaction between chip size and time of contact showed that the small-size chips are more sensitive to the increase of ethanol concentration for the extraction rate of some compounds (furfural, vanillin, maltol, cyclotene, whiskey lactones, and eugenol) compared to the large-size ones, increasing their concentrations at the end of maceration. The toasting degree of oak chips had a different influence on the volatile compounds studied. Cyclotene and guaiacol concentrations increased with the toasting intensity, whereas the extracted concentration of all compounds increased from light to medium-toasted chips, except for eugenol, and then decreased by further increasing the toasting level for 5-methylfurfural, whiskey lactones, eugenol, and only using high-level toasted chips for furfuryl alcohol, maltol, and vanillin. A possible protection effect of the chip size toward the possible degradation or volatilization losses of furfural for high toasting degrees was observed.

Mass spectrometry in the study of wood compounds released in the barrel-aged wine and spirits

Aging of wines and spirits in wooden barrels is an industrial process used to stabilize the color, to improve the limpidity and to enrich the sensorial characteristics of the products. In red wines, the oxygen that permeates through the wood staves promotes the oxidization of polyphenols and the formation of new pigments with consequent stabilization of the wine color. Barrel aging of spirits, such as brandy, whisky, rum, and grappa is finalized to enrich their aroma and improve their sensorial characteristics by the contribute of the compounds released by the wood. Oak is the wood type mostly used in making barrels; however, an increasing interest in the use of chestnut, cherry, acacia, and in less extent, ash and mulberry, has been observed in the recent years. Gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry are the main techniques used to characterize respectively the volatile and polar metabolites released by the wood barrels in the products. In this article are reported the recent advancements in this field.

Characterization of Some Stilbenoids Extracted from Two Cultivars of Lambrusco-Vitis vinifera Species: An Opportunity to Valorize Pruning Canes for a More Sustainable Viticulture

Pruning canes from grape vines are valuable byproducts that contain resveratrol and other health-boosting stilbenoids. This study aimed to assess the effect of roasting temperature on the stilbenoid content of vine canes by comparing two Vitis vinifera cultivars, Lambrusco Ancellotta and Salamino. Samples were collected during different phases of the vine plant cycle. One set was collected in September after the grape harvest and was air-dried and analyzed. A second set was obtained during vine pruning in February and evaluated immediately after collection. The main stilbenoid identified in each sample was resveratrol (~100-2500 mg/kg), with significant levels of viniferin (~100-600 mg/kg) and piceatannol (~0-400 mg/kg). Their contents decreased with increasing roasting temperature and residence time on the plant. This study provides valuable insights into the use of vine canes in a novel and efficient manner, which could potentially benefit different industries. One potential use involves the roasted cane chips to accelerate the aging of vinegars and alcoholic beverages. This method is more efficient and cost-effective than traditional aging, which is slow and unfavorable from an industrial perspective. Furthermore, incorporating vine canes into maturation processes reduces viticulture waste and enhances the final products with health-promoting molecules, such as resveratrol.

Influence of pre-fermentative addition of aqueous solution tannins extracted from oak wood (Quercus petraea) on the composition of Grillo wines

In this research, the chemical characterization of fixed and volatile compounds of two different tannins in aqueous solution (Pratiko® L-Harvest and L-Fruit) extracted from oak wood, has been studied. The influence of the above tannins, at different concentrations, on the alcoholic fermentation kinetics and on the composition and sensorial characteristics of a white wine were then evaluated. The wines added tannins in aqueous solution compared to control wines showed significant differences in fixed compounds (colloids, polyphenols and ellagitannins) and volatile compounds (phenolic aldehydes, volatile phenols, furanic and piranic compounds). The differences of aqueous solution tannins extracted from oak wood were partly due to the drying/maturing and roasting methods used in barrel production. Alcoholic fermentation was partially facilitated by the addition of tannins in aqueous solution. The wines obtained showed a higher content of ethyl esters of medium-chain fatty acids (from 22 to 31%) and, in some cases, higher acetate alcohols (from 15 to 28%), relevant to the olfactory sensations provided to the wines. The tannins added to the must before fermentation also made it possible to obtain an additional supply of polyphenols (from 25 to 85%) able to induce more complex sensory profiles in the wines, with increased persistent taste notes.

Comparison of an Offline SPE-GC-MS and Online HS-SPME-GC-MS Method for the Analysis of Volatile Terpenoids in Wine

The aroma profile is an important marker for wine quality. Various classes of compounds are responsible for the aroma of wine, and one such class is terpenoids. In the context of this work, a validated gas chromatography-mass spectrometry (GC-MS) method for the quantitation of terpenoids in red and white wine using headspace solid-phase microextraction (HS-SPME) and solid-phase extraction (SPE) was established. Calibrations were performed in the respective base wine using both sample preparation methods. The linearity, precision and accuracy evaluated for the respective matrices were excellent for both sample preparations. However, the HS-SPME approach was more sensitive and more accurate. For both sample preparations, the quantification limits were lower than the odor thresholds in wine. The terpenoid concentrations (µg/L) were evaluated for 13 white wines using both sample preparation methods. Importantly, the online HS-SPME approach was more sensitive than the offline SPE method. The major terpenoids identified in the white wines evaluated were linalool (0.2-63 µg/L), geraniol (nd-66 µg/L) and α-terpineol (nd-85 µg/L).

Volatilome fingerprint of red wines aged with chips or staves: Influence of the aging time and toasting degree

The influence on aroma compounds chips or staves and toasting degree have been analyzed in red wines aged for two periods of time. Ethyl propanoate, ethyl butanoate, ethyl octanoate, ethyl acetate, isoamyl acetate, isobutanol, 2-methyl-1-butanol, 2-phenylethanol, E-2-hexenol, octanal, nonanal, decanal, γ-nonalactone, furfural, 5-methylfurfural, 2-methoxy-4-vinylphenol and cis-whiskey lactone were the compounds that contribute the most to the aroma series profile. By means of principal components analysis, esters were related to the aging time; cis-whiskey lactone with the type of wood pieces and octanal, 5-methyl furfural and cis-whiskey lactone with the toasting degree. Star plot show that woody aroma compounds are dominant in wines aged with low toasting degree oak pieces, whereas medium plus toasted pieces increased the concentration of aroma compounds with fruity aroma descriptors. Wines with prominent fruity or woody aromas can be obtained depending upon the degree of toasting of wood pieces used for aging.

Study of Chardonnay and Sauvignon blanc wines from D.O.Ca Rioja (Spain) aged in different French oak wood barrels: Chemical and aroma quality aspects

This study discusses chemical data corresponding to the analysis of twenty-one wood-extractable aromatic compounds in twenty-four different barrels varying in the toasting level at three sampling times: at the end of the alcoholic fermentation and after 5 and 12months of aging. Twelve barrels contained monovarietal Chardonnay wine while the other twelve barrels contained Sauvignon blanc wine. The levels of nearly all the analyzed compounds increased with the aging time, with the exception of vinylphenols and methyl vanillate, which decreased. These latter compounds had significantly higher levels in the Chardonnay wines than in the Sauvignon blanc. Furfural, guaiacol and vanillin derivatives increased with the toasting level. ANOVA study showed significant interactions between the toasting level and aging time as well as between the variety and aging time, which revealed significant differences in the levels of the compounds studied in the wines dependent on the toasting level, variety and aging time. Quality perception based exclusively on orthonasal aroma stimuli was evaluated by a panel of Spanish wine professionals in 12-month aged wines belonging to both grape varieties. Experts from D.O.Ca Rioja aroma did not share a common aroma quality concept for aged Chardonnay and Sauvignon blanc wines. Considering the cluster formed by the majority of experts (76%) for the Chardonnay and cluster 1 (56%) for Sauvignon blanc, quality scores were negatively correlated with the concentration level of 4-vinylphenol and positively with the concentration level of (E)-isoeugenol. The opposite was observed for cluster 2 (44%) identified for Sauvignon blanc wines.

A review of polyphenolics in oak woods

Polyphenolics, which are ubiquitous in plants, currently are among the most studied phytochemicals because of their perceptible chemical properties and antioxidant activity. Oak barrels and their alternatives, which are widely used in winemaking nowadays, contribute polyphenolics to wines and are thought to play crucial roles in the development of wines during aging. This study summarizes the detailed information of polyphenolics in oak woods and their products by examining their structures and discussing their chemical reactions during wine aging. This paper evaluates the most recent developments in polyphenolic chemistry by summarizing their extraction, separation, and their identification by the use of chromatographic and spectral techniques. In addition, this paper also introduces polyphenol bioactive ingredients in other plant foods.

Applications of solid-phase microextraction and gas chromatography/mass spectrometry (SPME-GC/MS) in the study of grape and wine volatile compounds

Volatile compounds are responsible for the wine "bouquet", which is perceived by sniffing the headspace of a glass, and of the aroma component (palate-aroma) of the overall flavor, which is perceived on drinking. Grape aroma compounds are transferred to the wine and undergo minimal alteration during fermentation (e.g., monoterpenes and methoxypyrazines); others are precursors of aroma compounds which form in winemaking and during wine aging (e.g., glycosidically-bound volatile compounds and C13-norisoprenoids). Headspace solid phase microextraction (HS-SPME) is a fast and simple technique which was developed for analysis of volatile compounds. This review describes some SPME methods coupled with gas chromatography/mass spectrometry (GC/MS) used to study the grape and wine volatiles.

Characterization and differentiation of sherry brandies using their aromatic profile

Aroma compounds of 48 Sherry brandies have been identified and quantified by the stir bar sorptive extraction method coupled to gas chromatography-mass spectrometry (SBSE-GC/MS). Analysis of variance and multivariate analysis techniques have been used to classify these brandy samples according to the commercial category (Solera brandy, Solera Reserva brandy, and Solera Gran Reserva brandy). From an univariate point of view (analysis of variance), several of the volatile compounds considered showed significant differences. Principal component analysis, using the global data matrix, showed that only the Solera brandy samples, with the shortest aging in wood, were well-differentiated from the others. Partial least-squares discriminant analysis (PLS-DA) results provided evidence of the ability of the content of volatile compounds to discriminate among the different commercial categories. Linear discriminate analysis allowed for a 93% differentiation according to the commercial category and, thus, the length of its aging process in wood. The results obtained show that it would be possible to ensure the commercial category of a Sherry brandy using its content of volatile compounds.

Rapid quantification of major reaction products formed during thermochemical pretreatment of lignocellulosic biomass using GC-MS

Accurate quantification of reaction products formed during thermochemical pretreatment of lignocellulosic biomass would lead to a better understanding of plant cell wall deconstruction for production of cellulosic biofuels and biochemicals. However, quantification of some process byproducts, most notably acetamide, acetic acid and furfural, present several analytical challenges using conventional liquid chromatography methods. Therefore, we have developed a high-throughput gas chromatography based mass spectrometric (GC-MS) method in order to quantify relevant compounds without requiring time-consuming sample derivatization prior to analysis. Solvent extracts of untreated, ammonia fiber expansion (AFEX) treated and dilute-acid treated corn stover were analyzed by this method. Biomass samples were extracted with acetone using an automated solvent extractor, serially diluted and directly analyzed using the proposed GC-MS method. Acetone was the only solvent amongst water, methanol and acetonitrile that did not contain detectable background levels of the target compounds or facilitate a buildup of plant-derived residues in the GC injector, which decreased analytical reproducibility. Quantitative results were based on the method of standard addition and external standard calibration curves.

Differences in the volatile compositions of French labeled brandies (Armagnac, Calvados, Cognac, and Mirabelle) using GC-MS and PLS-DA

A total of 207 volatile compounds were identified in extracts of four French labeled brandies: Armagnac, Cognac, Calvados, and Mirabelle. Relative levels of all components were determined using GC-MS after integration of a selected peak of the mass spectrum of each. Each type of brandy could be clearly discriminated using PLS-DA statistical analyses based on these levels. French Mirabelle spirit, which was studied for the first time, was characterized by higher levels of many aldehydes and acetals and by the presence of compounds having an odd number of carbons together with benzaldehyde and some of its derivatives. Many possible derivatives of acrolein and high amounts of butan-2-ol were rather specific for the volatile composition of Calvados. The most important difference between the two wine-based samples seemed to be directly linked to the distillation system used. Many furanic compounds are specific to Cognac, whereas two or three compounds such as 1-(ethoxyethoxy)-2-methylbutane and gamma-eudesmol were specific to Armagnac. These two brandies presented rather high distributions of isobutanol and isopentanols, whereas Mirabelle and Calvados compositions offer more concentrated aliphatic linear alcohols.

Analysis of volatiles in Pinotage wines by stir bar sorptive extraction and chemometric profiling

A fast, simple, cost-effective, and reliable method based on stir bar sorptive extraction (SBSE) in the headspace mode was used for the analysis of 39 volatile components in Pinotage wines. The method was sensitive, with LODs ranging from 50.0 pg/L to 281 ng/L and LOQs between 180 pg/L and 938 ng/L. Precision was between 6 and 20%. The intermediate precision was within the acceptable range. Moreover, good calibration curves with R(2) > 0.99 for all compounds were achieved. The method was successfully applied for the analysis of 87 young Pinotage wines of vintages 2005 and 2006 collected from various South African regions. To characterize the results based on vintage and origin, the obtained concentrations of the compounds were subjected to chemometric analysis. Exploratory factor analysis (FA), principal component analysis (PCA), and analysis of variance (one-way ANOVA) were consecutively done. The chemometrics approach revealed a reasonable correlation among the volatile components of these wines, as well as with respect to their year of production.

Rapid headspace solid-phase microextraction-gas chromatographic–time-of-flight mass spectrometric method for qualitative profiling of ice wine volatile fraction

The previously developed and optimized headspace solid-phase microextraction (HS-SPME)-GC-time-of-flight (TOF) MS analytical method for the determination of compounds with a wide range of polarities and volatilities was successfully used in this study to characterize and classify a large set of ice wines according to their origin, grape variety and oak or stainless steel fermentation/ageing conditions, based on a statistical evaluation (principal component analysis (PCA)) of the measured data. More than 130 ice wine samples collected directly from Canadian and Czech wine producers were analyzed in this study. The SPME step was beneficially carried out utilizing the new-generation super elastic divinylbenzene/Carboxen/polydimethylsiloxane (DVB/CAR/PDMS) 50 microm/30 microm fiber assembly. One fiber was used for the whole sequence of ice wine samples, control and blank experiments, which consisted of more than 600 individual extraction/injection cycles. Utilizing the high-speed TOF analyzer, full spectral information within the range of 35-450 u was collected for the entire GC run (as short as 4.5 min) without compromising in the detection sensitivity, as compared to other scanning mass analyzers operated in selected ion monitoring or MS(n) mode to achieve similar sensitivity. The identification of analytes was performed by a combination of the linear temperature-programmed retention index (LTPRI) approach with the comparison of the obtained spectra with three libraries included in the ChromaTOF software. A total of 201 peaks were tentatively assigned as ice wine aroma components and 58 of those compounds were evaluated in all of the examined samples.

Solid-phase microextraction method for the determination of hexanal in hazelnuts as an indicator of the interaction of active packaging materials with food aroma compounds

Fatty foods are susceptible to lipid oxidation resulting in deterioration of product quality due to the generation of off-flavours. Hexanal is a good indicator of rancidity. Therefore, a method based on solid-phase microextraction (SPME) coupled to gas chromatograph with flame ionization detection was developed to determine hexanal formation in hazelnuts during storage. Optimum conditions were as follows: carboxen-polydimethylsiloxane 75 microm fibre, extraction time 10 min, equilibrium time 10 min and equilibrium temperature 60 degrees C. The effect of oxygen scavengers on the oxidation process was also evaluated by measuring hexanal formation in hazelnuts stored with/without oxygen absorber sachets. Oxygen scavengers were shown to reduce oxidation; however, analysis of the sachet revealed that other volatile compounds from the headspace were also absorbed.

Stir bar sorptive extraction for the determination of volatile compounds in oak-aged wines

Stir bar sorptive extraction (SBSE) followed by a thermal desorption-gas chromatography-mass spectrometry analysis has been optimized for the determination of 13 of the most important oak volatiles in wine samples, all in a single run. The stir bar sorptive extraction method was optimized in terms of temperature, time, pH and NaCl addition, and the best results were obtained after stirring the wine sample with the polydimethylsiloxane stir bar during 90min at room temperature. The addition of sodium chloride did not enhance the volatile extraction. The method proposed showed good linearity over the concentration range tested, with correlation coefficients ranging from 0.92 to 0.99 for all the analytes. The reproducibility and repeatability of the method was estimated between 0.11 and 5.45%. The detection and quantification limits of all analytes were lower than their respective olfactory threshold values, and, most importantly, no artifacts have been observed during the analysis as described in most extractions using other current methodologies.