Density Functional Theory Investigations of the Direct Oxidation of Methane on an Fe-Exchanged Zeolite

Change in the Nature of ZSM-5 Zeolite Depending on the Type of Metal Adsorbent-The Analysis of DOS and Orbitals for Iron Species

Transition-metal-modified zeolites have recently gained the greatest interest among scientists. Ab initio calculations within the density functional theory were used. The exchange and correlation functional was approximated with the Perdew-Burke-Ernzerhof (PBE) functional. Cluster models of ZSM-5 (Al₂Si₁₈O₅₃H₂₆) zeolites were used with Fe particles adsorbed above aluminum. The adsorption of three iron adsorbates inside the pores of the ZSM-5 zeolite-Fe, FeO and FeOH-was carried out with different arrangements of aluminum atoms in the zeolite structure. The DOS diagram and the HOMO, SOMO and LUMO molecular orbitals for these systems were analyzed. It has been shown that depending on the adsorbate and the position of aluminum atoms in the pore structure of the zeolite, the systems can be described as insulators or conductors, which significantly affects their activity. The main aim of the research was to understand the behavior of these types of systems in order to select the most efficient one for a catalytic reaction.

Unmasking the Iron-Oxo Bond of the [(Ligand)Fe-OIAr]2+/+ Complexes

ArIO (ArI = 2-(^tBuSO₂)C₆H₄I) is an oxidant used to oxidize Fe^II species to their Fe^IV-oxo state, enabling hydrogen-atom transfer (HAT) and oxygen-atom transfer (OAT) reactions at low energy barriers. ArIO, as a ligand, generates masked Feⁿ═O species of the type Fe^(n-2)-OIAr. Herein, we used gas-phase ion-molecule reactions and DFT calculations to explore the properties of masked iron-oxo species and to understand their unmasking mechanisms. The theory shows that the I-O bond cleavage in [(TPA)Fe^IVO(ArIO)]²⁺ (1²⁺, TPA = tris(2-pyridylmethyl)amine)) is highly endothermic; therefore, it can be achieved only in collision-induced dissociation of 1²⁺ leading to the unmasked iron(VI) dioxo complex. The reduction of 1²⁺ by HAT leads to [(TPA)Fe^IIIOH(ArIO)]²⁺ with a reduced energy demand for the I-O bond cleavage but is, however, still endothermic. The exothermic unmasking of the Fe═O bond is predicted after one-electron reduction of 1²⁺ or after OAT reactivity. The latter leads to the 4e^- oxidation of unsaturated hydrocarbons: The initial OAT from [(TPA)Fe^IVO(ArIO)]²⁺ leads to the epoxidation of an alkene and triggers the unmasking of the second Fe═O bond still within one collisional complex. The second oxidation step starts with HAT from a C-H bond and follows with the rebound of the C-radical and the OH group. The process starting with the one-electron reduction could be studied with [(TQA)Fe^IVO(ArIO)]²⁺ (2²⁺, TQA = tris(2-quinolylmethyl)amine)) because it has a sufficient electron affinity for electron transfer with alkenes. Accordingly, the reaction of 2²⁺ with 2-carene leads to [(TQA)Fe^IIIO(ArIO)]²⁺ that exothermically eliminates ArI and unmasks the reactive Fe^V-dioxo species.

Ambient-Temperature Hydrogen Storage via Vanadium(II)-Dihydrogen Complexation in a Metal-Organic Framework

The widespread implementation of H2 as a fuel is currently hindered by the high pressures or cryogenic temperatures required to achieve reasonable storage densities. In contrast, the realization of materials that strongly and reversibly adsorb hydrogen at ambient temperatures and moderate pressures could transform the transportation sector and expand adoption of fuel cells in other applications. To date, however, no adsorbent has been identified that exhibits a binding enthalpy within the optimal range of -15 to -25 kJ/mol for ambient-temperature hydrogen storage. Here, we report the hydrogen adsorption properties of the metal-organic framework (MOF) V2Cl2.8(btdd) (H2btdd, bis(1H-1,2,3-triazolo[4,5-b],[4',5'-i])dibenzo[1,4]dioxin), which features exposed vanadium(II) sites capable of backbonding with weak π acids. Significantly, gas adsorption data reveal that this material binds H2 with an enthalpy of -21 kJ/mol. This binding energy enables usable hydrogen capacities that exceed that of compressed storage under the same operating conditions. The Kubas-type vanadium(II)-dihydrogen complexation is characterized by a combination of techniques. From powder neutron diffraction data, a V-D2(centroid) distance of 1.966(8) Å is obtained, the shortest yet reported for a MOF. Using in situ infrared spectroscopy, the H-H stretch was identified, and it displays a red shift of 242 cm-1. Electronic structure calculations show that a main contribution to bonding stems from the interaction between the vanadium dπ and H2 σ* orbital. Ultimately, the pursuit of MOFs containing high densities of weakly π-basic metal sites may enable storage capacities under ambient conditions that far surpass those accessible with compressed gas storage.

Effects of single and double active sites of Cu oxide clusters over the MFI zeolite for direct conversion of methane to methanol: DFT calculations

In this work, we investigate the effect of various species of Cu oxide clusters including single and double active sites incorporated in the MFI zeolite framework for the direct conversion of methane to methanol. An M06-2X density functional calculation is employed to fine-tune the suitable number and species of active sites and to provide insights into the effect of the active sites on the reaction mechanism of methane to methanol. Two models, single and double active sites of Cu oxide clusters, have been chosen, in which the single active site of Cu oxide clusters, (mono(μ-oxo)dicopper(ii)), is located at the Al1'-Al12' pair ([Cu(μ-O)Cu]2+@Al1'-Al12'/MFI) or at the Al6-Al7 pair ([Cu(μ-O)Cu]2+@Al6-Al7/MFI) in the MFI framework. For the double active sites of Cu oxide clusters, two species of double active sites of Cu oxide are considered. The first one is the double active site of mono(μ-oxo)dicopper(ii) containingtwo Al-Al pairs (Al1'-Al12' and Al6-Al7 pairs) in the MFI framework (2[Cu(μ-O)Cu]2+/MFI) and the other is the double active site of trans-μ-1,2-peroxo dicopper(ii), which occupies two Al-Al pairs (Al1'-Al12' and Al6-Al7 pairs) in the MFI framework (2[Cu(μ-1,2-peroxo)Cu]2+/MFI). Furthermore, the activation energy for C-H bond dissociation in direct methane conversion to methanol is considered. Compared with the single active site of [Cu(μ-O)Cu]2+/MFI, the double active sites, in particular (2[Cu(μ-O)Cu]2+/MFI), exhibited the lowest activation energy, approximately 12.5 kcal mol-1. The high charge transfer between activated methane and Cu oxide active sites and also the high negative partial charge at the bridging oxygen of Cu oxide active sites, which directly interact with the methane molecule and abstracts its H atom, are considered as the important factors which affect the catalytic activity of Cu oxide clusters for direct methane conversion to methanol. These findings strongly support that the number and species of Cu oxide active sites incorporated in the MFI framework can highly affect the reaction mechanism of methane to methanol.

Mechanistic understanding of methane-to-methanol conversion on graphene-stabilized single-atom iron centers

DFT calculations and kinetic modeling elucidate solvent effects and complex mechanisms for the room-temperature methane-to-methanol conversion on an FeN4/graphene catalyst.

DFT investigations for the catalytic reaction mechanism of methane combustion occurring on Pd(ii)/Al-MCM-41

In this work, a theoretical analysis was carried out on the mechanism of methane combustion occurring on single site palladium oxide species [Pd]2+ supported on Al-MCM-41 silica. Single site Pd-oxo and PdO2-superoxo structures were used to represent the active centers. Activation energies for all the elementary steps involved in the oxidation of methane into formaldehyde are presented. The competition of methane/methanol substrates on active sites was examined. It was found that the formation of methanol via the reaction of methane with the superoxo species, formed via the adsorption of O2 on reduced Pd(ii) centers, facilitates the production of the very active Pd-oxo catalytic sites.

Methane activation on Fe- and FeO-embedded graphene and boron nitride sheet: role of atomic defects in catalytic activities

The influence of supporting materials, graphene and boron nitride sheets, on the reactivity of Fe and FeO active species have been unravelled by using a dispersion-corrected DFT (PBE-D2) method.

Direct oxidation of methane to methanol on Fe–O modified graphene

The reaction mechanisms of the partial oxidation of methane to methanol over FeO/graphene are unraveled using an advanced DFT approach.

A DFT study on the [VO]1+-ZSM-5 cluster: direct methanol oxidation to formaldehyde by N2O

The mechanism of direct oxidation of methanol to formaldehyde by N2O has been theoretically investigated by means of density functional theory over an extra framework species in ZSM-5 zeolite represented by a [(SiH3)4AlO4](1-)[V-O](1+) cluster model. The catalytic reactivity of these species is compared with that of mononuclear (Fe-O)(1+) sites in ZSM-5 investigated in our earlier work at the same level of theory (J. Catal. 2011, 282, 191). The [V-O](1+) site in ZSM-5 zeolite shows an enhanced catalytic activity for the reaction. The calculated vibrational frequencies for grafted species on vanadium sites on the surface are in good agreement with the experimental values. According to the theoretical results obtained in this study the [V-O](1+) site in the ZSM-5 catalyst has an important role in the direct catalytic oxidation of methanol to formaldehyde by N2O.

All-Metal Aromatic Complexes Show High Reactivity in the Oxidation Reaction of Methane and Some Hydrocarbons

The C-H activations of methane, ethane, propane, and propene catalyzed by all-metal aromatic complexes Al(4)Fe were investigated. The results reveal that the rate-determining barrier of methane activation reaction with Al(4)Fe is lower than that of both some well-known inorganic catalysts and some metal organic catalysts. It was found that the all-metal aromatic complexes have high reactivity for the C-H activation of ethane, propane, and propene. Further research showed that the ability of all-metal aromatic complex to accept an electron and the degree of electron delocalization on its aromatic plane had obvious influences on the reactivity of Al(4)Fe. The present work predicts a new kind of catalyst for the alkyl C-H activation reaction: all-metal aromatic catalyst.

Direct and Remarkably Efficient Conversion of Methane into Acetic Acid Catalyzed by Amavadine and Related Vanadium Complexes. A Synthetic and a Theoretical DFT Mechanistic Study

Vanadium(IV or V) complexes with N,O- or O,O-ligands, i.e., [VO{N(CH2CH2O)3}], Ca[V(HIDPA)2] (synthetic amavadine), Ca[V(HIDA)2], or [Bu4N]2[V(HIDA)2] [HIDPA, HIDA = basic form of 2,2'-(hydroxyimino)dipropionic or -diacetic acid, respectively], [VO(CF3SO3)2], Ba[VO(nta)(H2O)]2 (nta = nitrilotriacetate), [VO(ada)(H2O)] (ada = N-2-acetamidoiminodiacetate), [VO(Hheida)(H2O)] (Hheida = 2-hydroxyethyliminodiacetate), [VO(bicine)] [bicine = basic form of N,N-bis(2-hydroxyethyl)glycine], and [VO(dipic)(OCH2CH3)] (dipic = pyridine-2,6-dicarboxylate), are catalyst precursors for the efficient single-pot conversion of methane into acetic acid, in trifluoroacetic acid (TFA) under moderate conditions, using peroxodisulfate as oxidant. Effects on the yields and TONs of various factors are reported. TFA acts as a carbonylating agent and CO is an inhibitor for some systems, although for others there is an optimum CO pressure. The most effective catalysts (as amavadine) bear triethanolaminate or (hydroxyimino)dicarboxylates and lead, in a single batch, to CH3COOH yields > 50% (based on CH4) or remarkably high TONs up to 5.6 x 103. The catalyst can remain active upon multiple recycling of its solution. Carboxylation proceeds via free radical mechanisms (CH3* can be trapped by CBrCl3), and theoretical calculations disclose a particularly favorable process involving the sequential formation of CH3*, CH3CO*, and CH3COO* which, upon H-abstraction (from TFA or CH4), yields acetic acid. The CH3COO* radical is formed by oxygenation of CH3CO* by a peroxo-V complex via a V{eta1-OOC(O)CH3} intermediate. Less favorable processes involve the oxidation of CH3CO* by the protonated (hydroperoxo) form of that peroxo-V complex or by peroxodisulfate. The calculations also indicate that (i) peroxodisulfate behaves as a source of sulfate radicals which are methane H-abstractors, as a peroxidative and oxidizing agent for vanadium, and as an oxidizing and coupling agent for CH3CO* and that (ii) TFA is involved in the formation of CH3COOH (by carbonylating CH3*, acting as an H-source to CH3COO*, and enhancing on protonation the oxidizing power of a peroxo-VV complex) and of CF3COOCH3 (minor product in the absence of CO).

Efficient correlation-corrected vibrational self-consistent field computation of OH-stretch frequencies using a low-scaling algorithm

The authors present a new computational scheme to perform accurate and fast direct correlation-corrected vibrational self-consistent field (CC-VSCF) computations for a selected number of vibrational modes, which is aimed at predicting a few vibrations in large molecular systems. The method is based on a systematic selection of vibrational mode-mode coupling terms, leading to the direct ab initio construction of a sparse potential energy surface. The computational scaling of the CC-VSCF computation on the generated surface is then further reduced by using a screening procedure for the correlation-correction contributions. The proposed method is applied to the computation of the OH-stretch frequency of five aliphatic alcohols. The authors investigate the influence of different pseudopotential and all-electron basis sets on the quality of the correlated potential energy surfaces computed and on the OH-stretch frequencies calculated for each surface. With the help of these test systems, the authors show that their method offers a computational scaling that is two orders of magnitude lower than a standard CC-VSCF method and that it is of equal accuracy.

The Reactivity of All-Metal Aromatic Complexes: A Theoretical Investigation on the Methane Activation Reaction

The recent finding of all-metal aromaticity enlightens us to explore the reactivity of all-metal aromatic complexes. The methane activation reaction was chosen for this purpose. The whole catalysis process of all-metal aromatics was investigated by theoretical calculation. The results reveal that the reaction barriers with all-metal aromatic complexes are far lower than that without any catalysts. All-metal aromatic complexes are predicted to have potential to be used as catalysts for the first time.