Particulate and Bulk Bicontinuous Cubic Phases Obtained from Mixtures of Glyceryl Monooleate and Copolymers Bearing Blocks of Lipid−Mimetic Anchors in Water

Multiple grafting to enzymatically synthesized polyesters

Enzymatic polymerization is an environmentally benign process for the synthesis of biodegradable and biocompatible polymers. The regioselectivity of lipase B from Candida Antarctica (CAL-B) produces linear functional polyesters without protection-deprotection steps. In this work, two different methods for the enzymatic synthesis of functional polyesters based on renewable resources, as, e.g., glycerol, using CAL-B are outlined. Poly(glycerol adipate) was synthesized by enzymatic transesterification between glycerol and divinyl adipate or dimethyl adipate. Methods are also reported to graft poly(glycerol adipate) with different amounts of hydrophobic side chains (lauric, stearic, behenic, and oleic acids) and hydrophilic poly(ethylene glycol) side chains, respectively. The hydrophilicity or lipophilicity of grafted polyesters is well controlled by changing the degree of grafting of hydrophilic and hydrophobic side chains. The multiple grafted polyesters are characterized by NMR spectroscopy, differential scanning calorimetry, gel permeation chromatography, and X-ray diffraction. Furthermore, the self-assembly of the graft copolymers in water and their use as steric stabilizers for cubosomes are discussed. For this purpose mainly dynamic light scattering and small angle X-ray scattering have been employed.

Disposition and association of the steric stabilizer Pluronic® F127 in lyotropic liquid crystalline nanostructured particle dispersions

Liquid crystalline nanostructured particles, such as cubosomes and hexosomes, are most often colloidally stabilised using the tri-block co-polymer Pluronic® F127. Although the effect of F127 on the internal particle nanostructure has been well studied, the associative aspects of F127 with cubosomes and hexosomes are poorly understood. In this study the quantitative association of F127 with phytantriol-based cubosomes and hexosomes was investigated. The amount of free F127 in the dispersions was determined using pressure ultra-filtration. The percentage of F127 associated with the particles plateaued with increasing F127 concentration above the critical aggregation concentration. Hence the free concentration of F127 in the dispersion medium was proposed as a key factor governing association below the CMC, and partitioning of F127 between micelles and particles occurred above the CMC. The association of F127 with the particles was irreversible on dilution. The F127 associated with both the external and internal surfaces of the phytantriol cubosomes. The effects of lipid and F127 concentration, lipid type, dilution of the dispersions and internal nanostructure were also elucidated. A greater amount of F127 was associated with cubosomes comprised of glyceryl monooleate (GMO) than those prepared using phytantriol. Hexosomes prepared using a mixture of phytantriol and vitamin E acetate (vitEA) had a greater amount of F127 associated with them than phytantriol cubosomes. Hexosomes prepared using selachyl alcohol had less F127 associated with them than phytantriol:vitEA-based hexosomes and GMO-based cubosomes. This indicated that both the lipid from which the particles are composed and the particle internal nanostructure have an influence on the association of F127 with lyotropic liquid crystalline nanostructured particles.

Small-Angle X-ray Scattering Investigations of Biomolecular Confinement, Loading, and Release from Liquid-Crystalline Nanochannel Assemblies

This Perspective explores the recent progress made by means of small-angle scattering methods in structural studies of phase transitions in amphiphilic liquid-crystalline systems with nanochannel architectures and outlines some future directions in the area of hierarchically organized and stimuli-responsive nanochanneled assemblies involving biomolecules. Time-resolved small-angle X-ray scattering investigations using synchrotron radiation enable monitoring of the structural dynamics, the modulation of the nanochannel hydration, as well as the key changes in the soft matter liquid-crystalline organization upon stimuli-induced phase transitions. They permit establishing of the inner nanostructure transformation kinetics and determination of the precise sizes of the hydrophobic membraneous compartments and the aqueous channel diameters in self-assembled network architectures. Time-resolved structural studies accelerate novel biomedical, pharmaceutical, and nanotechnology applications of nanochannel soft materials by providing better control of DNA, peptide and protein nanoconfinement, and release from diverse stimuli-responsive nanocarrier systems.

Long-living intermediates during a lamellar to a diamond-cubic lipid phase transition: a small-angle X-ray scattering investigation

To generate nanostructured vehicles with tunable internal organization, the structural phase behavior of a self-assembled amphiphilic mixture involving poly(ethylene glycol) monooleate (MO-PEG) and glycerol monooleate (MO) is studied in excess aqueous medium by time-resolved small-angle X-ray scattering (SAXS) in the temperature range from 1 to 68 degrees C. The SAXS data indicate miscibility of the two components in lamellar and nonlamellar soft-matter nanostructures. The functionalization of the MO assemblies by a MO-PEG amphiphile, which has a flexible large hydrophilic moiety, appears to hinder the epitaxial growth of a double diamond (D) cubic lattice from the lamellar (L) bilayer structure during the thermal phase transition. The incorporated MO-PEG additive is found to facilitate the formation of structural intermediates. They exhibit greater characteristic spacings and large diffusive scattering in broad temperature and time intervals. Their features are compared with those of swollen long-living intermediates in MO/octylglucoside assemblies. A conclusion can be drawn that long-living intermediate states can be equilibrium stabilized in two- or multicomponent amphiphilic systems. Their role as cubic phase precursors is to smooth the structural distortions arising from curvature mismatch between flat and curved regions. The considered MO-PEG functionalized assemblies may be useful for preparation of sterically stabilized liquid-crystalline nanovehicles for confinement of therapeutic biomolecules.

Characterization and potential applications of nanostructured aqueous dispersions

The present article highlights recent advances and current status in the characterization and the utilization of nanostructured aqueous dispersions in which the submicron-sized dispersed particles envelope a distinctive well-defined self-assembled interior. The scope of this review covers dispersions of both inverted-type liquid-crystalline particles (cubosomes, hexosomes, micellar cubosomes, and sponge phases), and microemulsion droplets (emulsified microemulsions, EMEs). Recent investigations that have attempted to shed light on the characterization and the control of confined nanostructures of aqueous dispersions are surveyed, as these nanoobjects are attractive for various pharmaceutical and food applications. The focus has been placed on three main subjects: (1) our findings on the formation of EMEs and the modulation of the internal nanostructure, exploring how variations in temperature, oil content, and lipid composition significantly affect the confined nanostructures; (2) recent developments in the field of electron microscopy: using the tilt-angle cryo-TEM method or cryo-field emission scanning electron microscopy (cryo-FESEM) for observing the three dimensional (3D) morphology of non-lamellar liquid-crystalline nanostructured particles (cubosome and hexosome particles); and (3) recent studies on the utilization of nanostructured dispersions as drug nanocarriers.

Solubilization of hydrophobic guest molecules in the monoolein discontinuous QL cubic mesophase and its soft nanoparticles

Hydrophobic bioactive guest molecules were solubilized in the discontinuous cubic mesophase (QL) of monoolein. Their effects on the mesophase structure and thermal behavior, and on the formation of soft nanoparticles upon dispersion of the bulk mesophase were studied. Four additives were analyzed. They were classified into two types based on their presumed location within the lipid bilayer and their influence on the phase behavior and structure. Differential scanning calorimetry (DSC), small-angle X-ray scattering (SAXS), polarized light microscopy, cryogenic-transmission electron microscopy (cryo-TEM), and dynamic light scattering (DLS) were used for the analysis. We found that carbamazepine and cholesterol (type I molecules) likely localize in the hydrophobic domains, but close to the hydrophobic-hydrophilic region. They induce strong perturbation to the mesophase packing by influencing both the order of the lipid acyl chains and interactions between lipid headgroups. This results in significant reduction of the phase transition enthalpy, and phase separation into lamellar and cubic mesophases above the maximum loading capacity. The inclusion of type I molecules in the mesophase also prevents the formation of soft nanoparticles with long-range internal order upon dispersion. In their presence, only vesicles or sponge-like nanoparticles form. Phytosterols and coenzyme Q10 (type II molecules) present only moderate effects. These molecules reside in the hydrophobic domains, where they cannot alter the lipid curvature or transform the QL mesophase into another phase. Therefore, above maximum loading, excess solubilizate precipitates in crystal forms. Moreover, when type II-loaded QL is dispersed, nanoparticles with long-range order and cubic symmetry (i.e., cubosomes) do form. A model for the growth of the ordered nanoparticles was developed from a series of intermediate structures identified by cryo-TEM. It proposes the development of the internal structure by fusion events between bilayer segments.

Self-assembly in monoelaidin aqueous dispersions: direct vesicles to cubosomes transition

BACKGROUND

In the present study, synchrotron small-angle X-ray scattering (SAXS) and Cryo-TEM were used to characterize the temperature-induced structural transitions of monoelaidin (ME) aqueous dispersion in the presence of the polymeric stabilizer F127. We prove that the direct transition from vesicles to cubosomes by heating this dispersion is possible. The obtained results were compared with the fully hydrated bulk ME phase.

METHODOLOGY/PRINCIPAL FINDINGS

Our results indicate the formation of ME dispersion, which is less stable than that based on the congener monoolein (MO). In addition, the temperature-dependence behavior significantly differs from the fully hydrated bulk phase. SAXS findings indicate a direct L(alpha)-V(2) internal transition in the dispersion. While the transition temperature is conserved in the dispersion, the formed cubosomes with internal Im3m symmetry clearly contain more water and this ordered interior is retained over a wider temperature range as compared to its fully hydrated bulk system. At 25 degrees C, Cryo-TEM observations reveal the formation of most likely closely packed onion-like vesicles. Above the lamellar to non-lamellar phase transition at 65 degrees C, flattened cubosomes with an internal nanostructure are observed. However, they have only arbitrary shapes and thus, their morphology is significantly different from that of the well-shaped analogous MO cubosome and hexosome particles.

CONCLUSIONS/SIGNIFICANCE

Our study reveals a direct liposomes-cubosomes transition in ME dispersion. The obtained results suggest that the polymeric stabilizer F127 especially plays a significant role in the membrane fusion processes. F127 incorporates in considerable amount into the internal nanostructure and leads to the formation of a highly swollen Im3m phase.

Characterisation of bicontinuous cubic liquid crystalline systems of phytantriol and water using cryo field emission scanning electron microscopy (cryo FESEM)

Cubosomes are a novel lipid particulate delivery system currently being investigated for drug delivery purposes. The present study investigates bicontinuous cubic liquid crystalline systems (bulk phase and cubosomes) formed by phytantriol and water using cryo field emission scanning electron microscopy (cryo FESEM). Previously cubosomes have been characterized by cryo transmission electron microscopy (cryo TEM) with small angle X-ray diffraction (SAXS) confirming the bicontinuous liquid crystalline type. Bulk cubic phase and cubosomes were prepared from phytantriol and Pluronic F127 and analysed using cryo FESEM and SAXS. The micrographs showed the cubic phase had a tortuous, bicontinuous nature with a non-intersecting network of water channels. The cubosomes also show the same underlying tortuous structure entirely consistent with that of the bulk cubic phase and closely resemble the mathematical description of cubosomes described using nodal surface representation. The structure of both systems was confirmed using SAXS as a bicontinuous cubic liquid crystalline phase with Pn3m geometry. Cryo FESEM provides valuable insights into the morphological features of bicontinuous cubic liquid crystalline systems. The unique details shown provide strength to support the nodal surface representation of bicontinuous cubic liquid crystalline systems. Cryo FESEM provides a new technique to complement cryo TEM and SAXS for investigating their structure and function.

Dispersed lipid liquid crystalline phases stabilized by a hydrophobically modified cellulose

Aqueous dispersions of monoolein (MO) with a commercial hydrophobically modified ethyl hydroxyethyl cellulose ether (HMEHEC) have been investigated with respect to the morphologies of the liquid crystalline nanoparticles. Only very low proportions of HMEHEC are accepted in the cubic and lamellar phases of the monoolein-water system. Due to the broad variation of composition and size of the commercial polymer, no other single-phase regions were found in the quasi-ternary system. Interactions of MO with different fractions of the HMEHEC sample induced the formation of lamellar and reversed hexagonal phases, identified from SAXD, polarization microscopy, and cryogenic TEM examinations. In excess water (more than 90 wt %) coarse dispersions are formed more or less spontaneously, containing particles of cubic phase from a size visible by the naked eye to small particles observed by cryoTEM. At high polymer/MO ratios, vesicles were frequently observed, often oligo-lamellar with inter-lamellar connections. After homogenization of the coarse dispersions in a microfluidizer, the large particles disappeared, apparently replaced by smaller cubic particles, often with vesicular attachments on the surfaces, and by vesicles or vesicular particles with a disordered interior. At the largest polymer contents no proper cubic particles were found directly after homogenization but mainly single-walled defected vesicles with a peculiar edgy appearance. During storage for 2 weeks, the dispersed particles changed toward more well-shaped cubic particles, even in dispersions with the highest polymer contents. In some of the samples with low polymer/MO ratio, dispersed particles of the reversed hexagonal type were found. A few of the homogenized samples were freeze-dried and rehydrated. Particles of essentially the same types, but with a less well-developed cubic character, were found after this treatment.

Ordered 2-D and 3-D nanostructured amphiphile self-assembly materials stable in excess solvent

Amphiphile lyotropic liquid crystalline self-assembly materials are being used for a diverse range of applications. Historically, the most studied lyotropic liquid crystalline phase is probably the one-dimensional (1-D) lamellar phase, which has been employed as a model system for biomembranes and for drug delivery applications. In recent years, the structurally more complex 2-D and 3-D ordered lyotropic liquid crystalline phases, of which reversed hexagonal (H(2)) and reversed cubic phases (v(2)) are two prominent examples, have received growing interest. As is the case for the lamellar phase, these phases are frequently stable in excess water, which facilitates the preparation of nanoparticle dispersions and makes them suitable candidates for the encapsulation and controlled release of drugs. Integral membrane protein crystallization media and templates for the synthesis of inorganic nanostructured materials are other applications for 2-D and 3-D amphiphile self-assembly materials. The number of amphiphiles identified as forming nanostructured reversed phases stable in excess solvent is rapidly growing. In this article, different classes of amphiphiles that form reversed phases in excess solvent are reviewed, with an emphasis on linking phase behavior to amphiphile structure. The different amphiphile classes include: ethylene oxide-, monoacylglycerol-, glycolipid-, phosphatidylethanolamine-, and urea-based amphiphiles.