Formation of a hybrid compound composed of a saddle-distorted Tin(IV)-porphyrin and a Keggin-type heteropolyoxometalate to undergo intramolecular photoinduced electron transfer

Impact of POM's coordination mode and Mo-hybrid constituents on the binding, stability, and catalytic properties of hybrid (pre)catalysts

The assembly of MoVIO2 2+ and methoxy-substituted salicylaldehyde nicotinoyl hydrazone ligands afforded two classes of hybrid polyoxometalates (POMs). In the Class I architectures, [MoO2(HL1-3)(D)]2[Mo6O19]·xCH3COCH3 (D = CH3COCH3 or H2O, x = 0 or 2, and L1-3 = ligands bearing the OMe group at position 3, 4 and 5, respectively), the main driving force for self-assembly is the electrostatic interaction between the components. Class II architectures are composed of a POM anion covalently linked to two Mo-complex units through the terminal Ot or bridging μ2-OPOM oxygen atoms, as found in Lindqvist-based hybrids [{MoO2(HL1-3)}2Mo6O19]·xCH3CN (x = 0 or 2) and the asymmetrical β-octamolybdate-based hybrid [{Mo2O4(HL2)(H2L)}{MoO2(HL2)}2Mo8O26]·CH3CN·H2O. Quantum chemical calculations were applied to evaluate the impact of the POM hybrid constituents on the hybrid-type stability, showing that it strongly depends on the ligand substituent position and ancillary ligand nature. Hybrids were tested as catalysts for cyclooctene epoxidation using tert-butyl hydroperoxide (TBHP in water or decane) and with or without the addition of acetonitrile (CH3CN) as an organic solvent. The catalytic results provided by the use of TBHP in decane are the best ones and classify all the prepared catalysts as very active, with the conversion of cyclooctene >90%, and high selectivity towards epoxide, >80%. We also examined the influence of the ligand structure, POM's hybrid type, and coordination mode on the Mo-hybrid activity and selectivity.

Porphyrin-Polyoxotungstate Molecular Hybrid as a Highly Efficient, Durable, Visible-Light-Responsive Photocatalyst for Aerobic Oxidation Reactions

Organic-polyoxometalate (POM) hybrids have recently attracted considerable interest because of their distinctive properties and wide-ranging applications. For the construction of organic-POM hybrids, porphyrins are promising building units owing to their optical properties and reactivity, including strong visible-light absorption and subsequent singlet-oxygen (1O2*) generation. However, the practical utilization of porphyrins as photocatalysts and photosensitizers is often hindered by their own degradation by 1O2*. Therefore, there is a substantial demand for the development of porphyrin-derived photocatalysts with both high efficiency and durability. Herein, we present a porphyrin-polyoxotungstate molecular hybrid featuring a face-to-face stacked porphyrin dimer (I) fastened by four lacunary polyoxotungstates. Hybrid I exhibited remarkable efficiency and durability in photocatalytic aerobic oxidation reactions, and the selective oxidation of various dienes, alkenes, sulfides, and amines proceeded using just 0.003 mol % of the catalyst. Mechanistic investigations suggested that the high activity of I stems from the efficient generation of 1O2*, resulting from the heavy-atom effect of POMs. Furthermore, despite its high efficiency in 1O2* generation compared to free porphyrins, I exhibited superior durability against 1O2*-induced degradation under photoirradiation.

Nonplanar porphyrins: synthesis, properties, and unique functionalities

Porphyrins are variously substituted tetrapyrrolic macrocycles, with wide-ranging biological and chemical applications derived from metal chelation in the core and the 18π aromatic surface. Under suitable conditions, the porphyrin framework can deform significantly from regular planar shape, owing to steric overload on the porphyrin periphery or steric repulsion in the core, among other structure modulation strategies. Adopting this nonplanar porphyrin architecture allows guest molecules to interact directly with an exposed core, with guest-responsive and photoactive electronic states of the porphyrin allowing energy, information, atom and electron transfer within and between these species. This functionality can be incorporated and tuned by decoration of functional groups and electronic modifications, with individual deformation profiles adapted to specific key sensing and catalysis applications. Nonplanar porphyrins are assisting breakthroughs in molecular recognition, organo- and photoredox catalysis; simultaneously bio-inspired and distinctly synthetic, these molecules offer a new dimension in shape-responsive host-guest chemistry. In this review, we have summarized the synthetic methods and design aspects of nonplanar porphyrin formation, key properties, structure and functionality of the nonplanar aromatic framework, and the scope and utility of this emerging class towards outstanding scientific, industrial and environmental issues.

Yield-not only Lifetime-of the Photoinduced Charge-Separated State in Iridium Complex-Polyoxometalate Dyads Impact Their Hydrogen Evolution Reactivity

Covalently linked photosensitizer-polyoxometalate (PS-POM) dyads are promising molecular systems for light-induced energy conversion processes, such as "solar" hydrogen generation. To date, very little is known of their fundamental photophysical properties which affect the catalytic reactivity and stability of the systems. PS-POM dyads often feature short-lived photoinduced charge-separated states, and the lifetimes of these states are considered crucial for the function of PS-POM dyads in molecular photocatalysis. Hence, strategies have been developed to extend the lifetimes of the photoinduced charge-separated states, either by tuning the PS photophysics or by tuning the POM redox properties. Recently, some of us reported PS-POM dyads based on cyclometalated Ir^III complexes covalently linked to Anderson-type polyoxometalate. Distinct hydrogen evolution reactivity (HER) of the dyads was observed, which was tuned by varying the central metal ion M of the POM_M (M=Mn³⁺ , Co³⁺ , Fe³⁺ ). In this manuscript, the photoinduced electron-transfer processes in the three Ir-POM_M dyads are investigated to rationalize the underlying reasons for the differences in HER activity observed. We report that upon excitation of the Ir^III complex, ultrafast (sub-ps) charge separation occurs, leading to different amounts of the charge-separated states (Ir^.+ -POM_M ^.- ) generated in the different dyads. However, in all dyads studied, the resulting Ir^.+ -POM_M ^.- species are short-lived (sub-ns) when compared to reference electron acceptors (e.g. porphyrins or fullerenes) reported in the literature. The reductive quenching of Ir^.+ -POM_M ^.- by a sacrificial donor, triethyl amine (1 m), to generate the intermediate Ir-POM_M ^.- is estimated to be very efficient (70-80 %) for all dyads studied. Based on this analyses, we conclude that the yield instead of the lifetime of the Ir^.+ -POM_M ^.- charge-separated state determines the catalytic capacity of the dyads investigated. This new feature in the PS-POM photophysics could lead to new design criteria for the development of novel PS-POM dyads.

UV-vis absorption spectra of Sn(IV)tetrakis(4-pyridyl) porphyrins on the basis of axial ligation and pyridine protonation

The present study highlights the structural and electronic spectra of Sn(IV)tetrakis(4-pyridyl) porphyrins (SnTP) using density functional theory (DFT) and time-dependent density functional theory (TDDFT). The impact of axial ligands (OH^-, Cl^-, and H₂O) and protonation at pyridine sites on the excitation properties of SnTP is also explored. The considered SnTPs were optimized at B3LYP/6-31+G* level of theory with LANL2DZ basis set for Sn metal. The effects of tetrahydrofuran (THF) and dimethylformamide (DMF) solvents were also assessed employing conductor-like polarizable continuum (C-PCM) model. The observed structural effects correlate well with the experimental data and clearly depict the impact of axial ligands on the SnTP ring. The absorption spectra along with the frontier orbitals in all three phases show noticeable dependence of axial ligation on the photophysical properties of SnTPs. The transition character of molecular orbitals and their respective density of states (DOS) were explored to infer the orbitals involved in electronic transitions. Graphical abstract The structural and electronic spectra of Sn(IV)tetrakis(4-pyridyl) porphyrins (SnTP) were examined using time-dependent density functional theory (TDDFT). Axial ligation and pyridine protonation significantly affects the absorption properties of Sn complexes. The overall results suggest the application of [(OH^-)Sn (OH^-)TP] and [(Cl^-)Sn (Cl^-)TP] as photosensitizers.

Sn(IV) Multiporphyrin Arrays as Tunable Photoactive Systems

A series of four arrays made of a central Sn(IV) porphyrin as scaffold axially connected, via carboxylate functions, to two free-base porphyrins has been prepared and fully characterized. Three arrays in the series feature the same free-base unit and alternative tin-porphyrin macrocycles, and one consists of a second type of free-base and one chosen metallo-porphyrin. A thorough photophysical investigation has been performed on all arrays by means of time-resolved emission and absorption techniques. Specific focus has been given at identifying how structural modifications of the free-base and tin-porphyrin partners and/or variation of the solvent polarity can effectively translate into distinct photophysical behaviors. In particular, for systems SnTPP(Fb)₂ (1) and SnOEP(Fb)₂ (2), an ultrafast energy transfer process from the excited Sn(IV) porphyrin to the free-base unit occurs with unitary efficiency. For derivative SnTPP(FbR)₂ (3), the change of solvent from dichloromethane to toluene is accompanied by a neat change in the intercomponent quenching mechanism, from photoinduced electron transfer to energy transfer, upon excitation of the Sn(IV) porphyrin unit. Finally, for array SnTpFP(Fb)₂ (4), an ultrafast electron transfer quenching of both chromophores is detected in all solvents. This work provides a general outline, accompanied by clear experimental support, on possible ways to achieve a systematic fine-tuning of the quenching mechanism (from energy to electron transfer) of Sn(IV) multiporphyrin arrays.

Coexistence of distinct intramolecular electron transfer pathways in polyoxometalate based molecular triads

Polyoxometalate (POM)-associated charge-separated states, formed by the photoinduced oxidation of a covalently attached photosensitizer and reduction of the POM, have attracted much attention due to the remarkable catalytic properties of the reduced POMs. However, short lifetimes of the POM-associated charge-separated state, which in some cases lead to the backward electron transfer being more rapid than the formation of the charge-separated state itself, are generally observed. Recently, we reported on the first example of a relative long-lived (τ = 470 ns) charge-separated state in a Ru(ii) bis(terpyridine)-POM molecular dyad. In this manuscript, further studies on extended molecular structures - two molecular triads - which contain an additional electron donor, phenothiazine (PTZ) or π-extended tetrathiafulvalene (exTTF), are discussed. We show that the excitation of the photosensitizer leads to the population of two distinct MLCT states, which differ in the distribution of excess electron density on the two distinct tpy ligands. These two MLCT states decay separately and, thus, constitute the starting points for distinct intramolecular electron-transfer pathways leading to the simultaneous population of two partially charge-separated states, i.e. PTZ˙+-Ru(tpy)2˙--POM and PTZ-RuIII(tpy)2-POM˙-. These independent decay pathways are unaffected by the choice of the electron donor. Thus, the initial charge distribution within the coordination environment of the photocenter determines the nature of the subsequent (partially) charge separated state that is formed in the triads. These results might open new avenues to design molecular interfaces, in which the directionality of electron transfer can be tuned by the choice of initial excitation.

Direct detection of the photoinduced charge-separated state in a Ru(ii) bis(terpyridine)-polyoxometalate molecular dyad

Observation of photoinduced intramolecular charge-separation is difficult for photosensitizer-POM dyads because of rapid backward electron transfer. We report here for the first time on a long-lived charge-separated state (τ = 470 ns) observed in a Ru(ii) bis(terpyridine)-based dyad. Charge-separation occurs despite virtually no driving force and the short intrinsic excited-state lifetime of the photosensitizer.

Triplet energy vs. electron transfers in porphyrin- and tetrabenzoporphyrin-carboxylates/Pd3(dppm)3(CO)2+ cluster assemblies; a question of negative charge

The simple replacement of the methyl groups by carboxylates changes the dominant quenching mechanism in dye⋯[Pd32+]_x assemblies from energy to electron transfer.

An efficient visible light photocatalyst based on tin porphyrin intercalated between TiO2–graphene nanosheets for inactivation of E. coli and investigation of charge transfer mechanism

Tin porphyrin intercalated between the TiO₂–grphene nanocomposite. The inactivation of E. coli over the prepared compound was significantly increased via the interaction of tin porphyrin between the TiO₂–graphene nanocomposite.

Synthesis and strong photooxidation power of a supramolecular hybrid comprising a polyoxometalate and Ru(II) polypyridyl complex with zinc(II)

A novel method for constructing supramolecular hybrids composed of polyoxometalates and photofunctional metal complexes was developed. A Ru(II) complex with phosphonate groups (RuP) strongly interacted with Zn(II) to afford a 2 : 1 trinuclear metal complex ([(RuP)2Zn](3+)). In dimethylsulfoxide, [(RuP)2Zn](3+) strongly interacted with a Keggin-type heteropolyoxometalate (Si-WPOM) to form a 1 : 1 hybrid ([(RuP)2Zn]-POM). Irradiation of [(RuP)2Zn]-POM in the presence of diethanolamine caused rapid accumulation of the one-electron reduced hybrid with a quantum yield of 0.99.

Organoantimony(III)-Containing Tungstoarsenates(III): From Controlled Assembly to Biological Activity

A family of three sandwich-type, phenylantimony(III)-containing tungstoarsenates(III), [(PhSb(III) ){Na(H2 O)}As(III) 2 W19 O67 (H2 O)](11-) (1), [(PhSb(III) )2 As(III) 2 W19 O67 (H2 O)](10-) (2), and [(PhSb(III) )3 (B-α-As(III) W9 O33 )2 ](12-) (3), have been synthesized by one-pot procedures and isolated as hydrated alkali metal salts, Cs3 K3.5 Na4.5 [(PhSb(III) ){Na(H2 O)}As(III) 2 W19 O67 (H2 O)]⋅41H2 O (CsKNa-1), Cs4.5 K5.5 [(PhSb(III) )2 As(III) 2 W19 O67 (H2 O)]⋅35H2 O (CsK-2), and Cs4.5 Na7.5 [(PhSb(III) )3 (B-α-As(III) W9 O33 )2 ]⋅42H2 O (CsNa-3). The number of incorporated {PhSb(III) } units could be selectively tuned from one to three by careful control of the reaction parameters. The three compounds were characterized in the solid state by single-crystal XRD, IR spectroscopy, and thermogravimetric analysis. The aqueous solution stability of sandwich polyanions 1-3 was also studied by multinuclear ((1) H, (13) C, (183) W) NMR spectroscopy. Effective inhibitory activity against six different kinds of bacteria was identified for all three polyanions, for which the activity increased with the number of incorporated {PhSb(III) } groups.

Molecular assemblies based on strong axial coordination in metal complexes of saddle-distorted dodecaphenylporphyrins

In this mini-review, we have highlighted our works on metal complexes having saddle-distorted dodecaphenylporphyrin (DPP) and its derivative as ligands in the light of enhancement of the Lewis acidity of a metal center coordinated by the porphyrin. The important point through this mini-review is ill-overlap of the out-of-plane lone pairs of pyrrole nitrogen atoms with σ-orbitals of the metal center bound to the saddle-distorted porphyrin core. The enhanced Lewis acidity of the central metal ions enabled us to construct stable molecular complexes through axial coordination using metal–DPP (M(DPP)) moieties ( M = Mo V or Sn IV ) and molecular or ionic entities with Lewis-basic coordination sites, including Keggin-type polyoxometallates (POM), which are known to have weak Lewis basicity and thus hard to coordinate to metal ions. A discrete 1:2 complex with a Ru -substituted POM performs catalytic substrate oxidation reactions in organic solvents. A 1:1 complex between Sn IV ( DPP ) and a Keggin-type POM exhibited photoinduced electron transfer, in which the Sn IV ( DPP ) moiety acts as an electron donor and the POM as an electron acceptor. Besides POM, other electron acceptors, including μ3-oxo trinuclear Ru III clusters and anthraquinone, having carboxyl groups as a linker unit also formed stable complexes with DPP-metal complexes as axial ligands to perform photoinduced electron transfer. Successful photoreactions of the M(DPP)-acceptor complexes are mainly enabled by the enhanced Lewis acidity of the DPP-metal complexes for the stabilization of the assemblies and also by lowering the oxidation potential of the porphyrin ligand to gain larger driving force of electron transfer to form an electron-transfer state with avoiding intersystem crossing. The stability and photochemical behavior are in sharp contrast to those for metal complexes with planar porphyrins as ligands.

Synthesis and characterization of conjugated Dawson-type polyoxometalate-porphyrin copolymers

Hybrid polyoxometalate-porphyrin copolymeric films were obtained by the electro-oxidation of zinc octaethylporphyrin (ZnOEP) in the presence of a Dawson type polyoxophosphovanadotungstate bearing two pyridyl groups (POM(py)2). The synthesis of a series of POM(py)2 consisting of [P2W15V3O62](9-) functionalized with diol-amide or triol moieties, as well as the characterization of the copolymers are presented.

Control of the spatial arrangements of supramolecular networks based on saddle-distorted porphyrins by intermolecular hydrogen bonding

Supramolecular integration of a saddle-distorted zinc(II) porphyrin complex, which has hydroxyl groups at the para-position of the four meso-aryl groups, has been demonstrated on the basis of hydrogen bonding among the peripheral hydroxyl groups. The hydrogen-bonding patterns were controlled by the recrystallization solvents and additives, and particularly, addition of a bifunctional ligand such as 4,4'-bipyridine (bpy). The coordination of bpy to form dinuclear Zn(II)-porphyrin complexes causes a conformational difference: the dimeric complex with four hydroxyl groups is in an eclipsed form, however, a derivative without hydroxyl groups is in a staggered form due to the presence or absence of the intermolecular hydrogen bonding. In addition, the dimerization by the bpy coordination resulted in the expansion of the intermolecular space formed in the porphyrin networks, suggesting the potential to be applied for inclusion of guest molecules.

Photophysics of soret-excited tin(IV) porphyrins in solution

The photophysics of low-chlorin tin(IV) tetraphenylporphyrin dihydroxide, a core building block for axially substituted supramolecular tin porphyrin constructs, has been studied in a variety of hydrogen-bonding, nonpolar, and aprotic polar solvents using steady-state, nanosecond, and femtosecond time-resolved emission, and femtosecond time-resolved absorption methods. In hydrogen-bonding solvents the metalloporphyrin exists as solvated monomers, and its Soret-excited S2 state in these solvents exhibits the expected linear energy gap law relationship with first-order population decay times in the 0.8 to 1.7 ps range. Evidence is presented that this metalloporphyrin aggregates in other solvents at the concentrations typically used for these ultrafast measurements and yields species-averaged time-resolved data. Cw laser excitation in the Q-band under deaerated conditions produces weak S2-S0 fluorescence (photon upconversion) as a result of triplet-triplet annihilation.

Synthesis, electrochemical and photophysical properties of covalently linked porphyrin-polyoxometalates

Two covalently linked porphyrin-polyoxometalate hybrids have been prepared: an Anderson-type hexamolybdate [N(C(4)H(9))(4)](3)[MnMo(6)O(18){(OCH(2))(3)CNHCO(ZnTPP)}(2)] with two pendant zinc(II)-tetraphenylporphyrins, and a Dawson-type vanadotungstate [N(C(4)H(9))(4)](5)H[P(2)V(3)W(15)O(59){(OCH(2))(3)CNHCO(ZnTPP)}] with one porphyrin. Electrochemical studies show independent redox processes for the organic and inorganic parts at usual potentials. Photophysical studies reveal an electron transfer from the excited porphyrin to the Dawson polyoxometalate, but not to the Anderson polyoxometalate. Time resolved absorption spectroscopy allows the identification of the electron transfer pathways and the determination of the time constants.

Synthesis and biological activity of organoantimony(III)-containing heteropolytungstates

Three discrete organoantimony(III)-containing heteropolytungstates [(PhSb(III))(4)(A-α-Ge(IV)W(9)O(34))(2)](12-) (1), [(PhSb(III))(4)(A-α-P(V)W(9)O(34))(2)](10-) (2), and [{2-(Me(2)NCH(2)C(6)H(4))Sb(III)}(3)(B-α-As(III)W(9)O(33))](3-) (3) have been synthesized in one-pot reactions in aqueous medium using the appropriate lacunary heteropolyanion precursor and organoantimony(III) source. Polyanions 1-3 were isolated as hydrated salts, (NH(4))(12)[(PhSb(III))(4)(A-α-Ge(IV)W(9)O(34))(2)]·20H(2)O (1a), Rb(9)Na[(PhSb(III))(4)(A-α-P(V)W(9)O(34))(2)]·20H(2)O (2a), and Rb(3)[{2-(Me(2)NCH(2)C(6)H(4))Sb(III)}(3)(B-α-As(III)W(9)O(33))]·7H(2)O (3a). The compounds 1a-3a were fully characterized in the solid state using infrared (IR) spectroscopy, single-crystal XRD, and thermogravimetric and elemental analyses. The stability of 1-3 in aqueous solution was confirmed by multinuclear NMR ((1)H, (13)C, (31)P, and (183)W) spectroscopy. Preliminary studies on the biological activity of 1-3 showed that all three compounds might act as potent antimicrobial agents.

Polyoxometalate water oxidation catalysts and the production of green fuel

In the last five years and currently, research on solar fuels has been intense and no sub-area in this field has been more active than the development of water oxidation catalysts (WOCs). In this timeframe, a new class of molecular water oxidation catalysts based on polyoxometalates have been reported that combine the advantages of homogeneous and heterogeneous catalysts. This review addresses central issues in green energy generation, the challenges in water oxidation catalyst development, and the possible uses of polyoxometalates in green energy science.