Indirect Electrochemical Cr(III) Oxidation in KOH Solutions at an Au Electrode: The Role of Oxygen Reduction Reaction

Synthesis of Intrinsically-Fluorescent Aliphatic Tautomeric Polymers for Proton-Conductivity, Dual-State Emission, and Sensing/Oxidation-Reduction of Metal Ions

Herein, fluorescent conducting tautomeric polymers (FCTPs) are developed by polymerizing 2-methylprop-2-enoic acid (MPEA), methyl-2-methylpropenoate (MMP), N-(propan-2-yl)prop-2-enamide (PPE), and in situ-anchored 3-(N-(propan-2-yl)prop-2-enamido)-2-methylpropanoic acid (PPEMPA). Among as-synthesized FCTPs, the most promising characteristics in FCTP3 are confirmed by NMR and Fourier transform infrared (FTIR) spectroscopies, luminescence enhancements, and computational studies. In FCTP3, ─C(═O)NH─, -C(═O)N<, ─C(═O)OH, and ─C(═O)OCH3 subluminophores are identified by theoretical calculations and experimental analyses. These subluminophores facilitate redox characteristics, solid state emissions, aggregation-enhanced emissions (AEEs), excited-state intramolecular proton transfer (ESIPT), and conductivities in FCTP3. The ESIPT-associated dual emission/AEEs of FCTP3 are elucidated by time correlated single photon counting (TCSPC) investigation, solvent polarity effects, concentration-dependent emissions, dynamic light scattering (DLS) measurements, field emission scanning electron microscopy images, and computational calculations. The cyclic voltammetry measurements of FCTP3 indicate cumulative redox efficacy of ─C(═O)OH, ─C(═O)NH─/-C(═O)N<, ─C(─O─)═NH+─/─C(─O─)═N+, and ─C(═N)OH functionalities. In FCTP3, ESIPT-associated dual-emission enable in the selective detection of Cr(III)/Cu(II) at λem1/λem2 with the limit of detection of 0.0343/0.079 ppb. The preferential interaction of Cr(III)/Cu(II) with FCTP3 (amide)/FCTP3 (imidol) and oxidation/reduction of Cr(III)/Cu(II) to Cr(VI)/Cu(I) are further supported by NMR-titration; FTIR and X-ray photoelectron spectroscopy analyses; TCSPC/electrochemical/DLS measurement; alongside theoretical calculations. The proton conductivity of FCTP3 is explored by electrochemical impedance spectroscopy and I-V measurements.

Phosphinous Acid-Phosphinito Tetra-Icosahedral Au52 Nanoclusters for Electrocatalytic Oxygen Reduction

While the formation of superatomic nanoclusters by the three-dimensional assembly of icosahedral units was predicted in 1987, the synthesis and structural determination of such clusters have proven to be incredibly challenging. Herein, we employ a mixed-ligand strategy to prepare phosphinous acid-phosphinito gold nanocluster Au₅₂(HOPPh₂)₈(OPPh₂)₄(TBBT)₁₆ with a tetra-icosahedral kernel. Unlike expected, each icosahedral Au₁₃ unit shares one vertex gold atom with two adjacent units, resulting in a "puckered" ring shape with a nuclearity of 48 in the kernel. The phosphinous acid-phosphinito ligand set, which consists of two phosphinous acids and one phosphinito motif, has strong intramolecular hydrogen bonds; the π-π stacking interactions between the phosphorus- and sulfur-based ligands provide additional stabilization to the kernel. Highly stable Au₅₂(HOPPh₂)₈(OPPh₂)₄(TBBT)₁₆ serves as an effective electrocatalyst in the oxygen reduction reaction. Density functional theory calculations suggest that the phosphinous acid-phosphinito ligands provide the most active sites in the electrochemical catalysis, with O* formation being the rate-determining step.

Alkaline electrochemical advanced oxidation process for chromium oxidation at graphitized multi-walled carbon nanotubes

Alkaline electrochemical advanced oxidation processes for chromium oxidation and Cr-contaminated waste disposal were reported in this study. The highly graphitized multi-walled carbon nanotubes g-MWCNTs modified electrode was prepared for the in-situ electrochemical generation of HO₂^-. RRDE test results illustrated that g-MWCNTs exhibited much higher two-electron oxygen reduction activity than other nanocarbon materials with peak current density of 1.24 mA cm^-2, %HO₂^- of 77.0% and onset potential of -0.15 V (vs. Hg/HgO). It was originated from the highly graphitized structure and good electrical conductivity as illustrated from the Raman, XRD and EIS characterizations, respectively. Large amount of reactive oxygen species (HO₂^- and ·OH) were in-situ electro-generated from the two-electron oxygen reduction and chromium-induced alkaline electro-Fenton-like reaction. The oxidation of Cr(III) was efficiently achieved within 90 min and the conversion ratio maintained more than 95% of the original value after stability test, offering an efficient and green approach for the utilization of Cr-containing wastes.

Tuning α-Fe2O3 nanotube arrays for the oxygen reduction reaction in alkaline media

α-Fe₂O₃ nanotube arrays were fabricated and employed as low cost non-noble electrocatalysts for the oxygen reduction reaction (ORR). As-prepared α-Fe₂O₃ nanotube arrays exhibit excellent ORR catalytic activity and durability in alkaline media.

A New Mechanism in Electrochemical Process for Arsenic Oxidation: Production of H2O2 from Anodic O2 Reduction on the Cathode under Automatically Developed Alkaline Conditions

Electrochemical cathodes are often used to reduce contaminants or produce oxidizing substances (i.e., H2O2). Alkaline conditions develop automatically around the cathode in electrochemical processes, and O2 diffuses onto the cathode easily. However, limited attention is paid to contaminant transformation by the reactive species produced on the cathode under oxic and alkaline conditions due to the inapplicability of pH for Fenton reaction. In this study, a new oxidation mechanism on the cathode is presented for contaminant transformation under automatically developed alkaline conditions. In an electrochemical sand column, 6.67 μM As(III) was oxidized by 36% when it passed through the cathode under the conditions of 30 mA current, an initial pH of 7.5 and a flow rate of 2 mL/min. Under the alkaline conditions (pH 10.0-11.0) that developed automatically around the cathode, the reduction potential of As(III) decreased greatly, allowing a pronounced oxidation by the small quantities of H2O2 produced from O2 reduction on the cathode. As(III) oxidation was further increased by the presence of soil pore water and groundwater solutes of HCO3-, Ca2+, Mg2+ and humic acid. The new oxidation mechanism found for the cathode under localized alkaline conditions supplements the fundamentals of contaminant transformation in electrochemical processes.

Electrolytic recovery of bismuth and copper as a powder from acidic sulfate effluents using an emew® cell

Effective removal of bismuth is a primary concern during copper electrorefining.

Recent advances in electrochemical detection of toxic Cr(vi)

The recent achievements and future directions in electrochemical quantification of toxic hexavalent chromium were outlined.

Integrated lignin-mediated adsorption-release process and electrochemical reduction for the removal of trace Cr(vi)

Hexavalent chromium Cr(vi) is extremely toxic and is classified as a human carcinogen, even at trace concentrations.