Porosity Inherent to Chemically Crosslinked Polymers. Poly(N-vinylimidazole) Hydrogels

Engineering alginate/carboxymethylcellulose scaffolds to establish liver cancer spheroids: Evaluation of molecular variances between 2D and 3D models

Natural polymeric hydrogels represent an optimal framework for 3D culture development. This study demonstrates a freeze-thaw-based ionic crosslinking technique for fabricating alginate/carboxymethylcellulose scaffold for culturing human hepatocellular carcinoma, Huh-7 cells to generate 3D spheroids. Consolidating morphological and biomechanical characterization of Alg/CMC scaffolds shows the formation of uniform hydrogels with significant crosslinking (ATR-FTIR), multiscale pores (FE-SEM), swelling/water absorbance, softer texture, viscoelasticity (rheology), spreading nature (contact angle), and degradation rate optimal for 3D culture establishment. The influence of cell seeding density and time with spheroid formation reveals a maximal size of 250-300 μm on day 7. Calcein AM and Propidium iodide staining confirm that a culmination of viable and dead cells generates spheroidal heterogeneity. RT-qPCR in 3D culture against RPL-13 and 2D culture controls indicate an upregulation of E-cadherin, N-cadherin, fibronectin, and integrin α9/β6. Further, western blotting and immunofluorescence confirm the collective display of cellular interactions in 3D spheroids. Thus, the expression profile signifies the role of key genes during the assembly and formation of 3D spheroids in 1%Alg/1%CMC scaffolds with a profound epithelial characteristic. In the future, this study will bring a 3D spheroid model in a platter for elucidating epithelial to mesenchymal transition of cells during in vitro disease modeling.

Toward highly effective loading of DNA in hydrogels for high-density and long-term information storage

Digital information, when converted into a DNA sequence, provides dense, stable, energy-efficient, and sustainable data storage. The most stable method for encapsulating DNA has been in an inorganic matrix of silica, iron oxide, or both, but are limited by low DNA uptake and complex recovery techniques. This study investigated a rationally designed thermally responsive functionally graded (TRFG) hydrogel as a simple and cost-effective method for storing DNA. The TRFG hydrogel shows high DNA uptake, long-term protection, and reusability due to nondestructive DNA extraction. The high loading capacity was achieved by directly absorbing DNA from the solution, which is then retained because of its interaction with a hyperbranched cationic polymer loaded into a negatively charged hydrogel matrix used as a support and because of its thermoresponsive nature, which allows DNA concentration within the hydrogel through multiple swelling/deswelling cycles. We were able to achieve a high DNA data density of 7.0 × 10⁹ gigabytes per gram using a hydrogel-based system.

Highly Robust Interfacially Polymerized PA Layer on Thermally Responsive Semi-IPN Hydrogel: Toward On-Demand Tuning of Porosity and Surface Charge

Hydrogel composites with skin layer that allows fast and selective rejection of molecules possess high potential for numerous applications, including sample preconcentration for point-of-use detection and analysis. The stimuli-responsive hydrogels are particularly promising due to facile regenerability. However, poor adhesion of the skin layer due to swelling-degree difference during continuous swelling/deswelling of the hydrogel hinders its further development. In this work, a polyamide skin layer with strong adhesion was fabricated via gel-liquid interfacial polymerization (GLIP) of branched polyethyleneimine (PEI) with trimesoyl chloride (TMC) on a cross-linked N-isopropyl acrylamide hydrogel network containing dispersed poly sodium acrylate (PSA), while the traditional m-phenylenediamine (MPD)-TMC polyamide layer readily delaminates. We investigated the mechanistic design principle, which not only resulted in strong anchoring of the polyamide layer to the hydrogel surface but also enabled manipulation of the surface morphology, porosity, and surface charge by tailoring interfacial reaction conditions. The polyamide/hydrogel composite was able to withstand 100 cycles of swelling/deswelling without any delamination or a significant decrease in its rejection performance of the model dye, i.e., methylene blue. Regeneration can be done by deswelling the swollen beads at 60 °C, which also releases any loosely bound molecules together with absorbed water. This work provides insights into the development of a physically and chemically robust skin layer on various types of hydrogels for applications such as preconcentration, antifouling-coating, selective compound extraction, etc.

The structural fate of lipid nanoparticles in the extracellular matrix

Drug-loaded liposomes are the most successful nanomedicine to date, with multiple FDA-approved systems for a myriad of diseases. While liposome circulation time in blood and retention in tissues have been studied in detail, the structural fate of liposomes-and nanoparticles in general-in the body has not been extensively investigated. Here, we explore the interactions of liposomes with synthetic and natural hydrogel materials to understand how the natural extracellular matrix influences liposome structural characteristics. Small angle X-ray scattering, confocal microscopy, and cryogenic transmission electron microscopy data demonstrate that poly(ethylene glycol) (PEG), gelatin, alginate, and Matrigel® hydrogels cause 200-nm liposomes of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) to transform into micrometer-sized aggregates. These aggregates are composed of multilamellar vesicles around 100 nm in diameter with a mean interlamellar separation of 5.5 nm. Protecting the liposomes with a corona of PEG damps this restructuring effect, making the multilamellar vesicles less stable. We attribute this unilamellar to multilamellar transition to an osmotic driving force from the hydrogel environment. This lipid restructuring has broad ramifications in the design and use of nanomedicines, and in understanding the fate and function of natural lipid-based materials within the tissue microenvironment.

Kinetic and thermodynamic properties of purified alkaline protease from Bacillus pumilus Y7 and non-covalent immobilization to poly(vinylimidazole)/clay hydrogel

The characterization of the hydrogel was performed using Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy. Purified Bacillus pumilus Y7‐derived alkaline protease was immobilized in Poly (vinylimidazole)/clay (PVI/SEP) hydrogel with 95% yield of immobilization. Immobilization decreased the pH optimum from 9 to 6 for free and immobilized enzyme, respectively. Temperature optimum 3°C decreased for immobilized enzyme. The K_m, V_m, and k_cat of immobilized enzyme were 4.4, 1.7, and 7.5‐fold increased over its free counterpart. Immobilized protease retained about 65% residual activity for 16^th reuse. The immobilized protease endured its 35% residual activity in the material after six cycle's batch applications. The results of thermodynamic analysis for casein hydrolysis showed that the ΔG^≠ (activation free energy) and ΔG^≠_E‐T (activation free energy of transition state formation) obtained for the immobilized enzyme decreased in comparison to those obtained for the free enzyme. On the other hand, the value of ΔG^≠_ES (free energy of substrate binding) was observed to have increased. These results indicate an increase in the spontaneity of the biochemical reaction post immobilization. Enthalpy value of immobilized enzyme that was 2.2‐fold increased over the free enzyme indicated lower energy for the formation of the transition state, and increased ΔS^≠ value implied that the immobilized form of the enzyme was more ordered than its free form.

A strong and tough interpenetrating network hydrogel with ultrahigh compression resistance

A novel interpenetrating network (IPN) hydrogel with ultrahigh compressive strength and fracture strain has been prepared using the copolymer of 2-acrylamide-2-methylpropane sulfonic acid (AMPS) and acrylamide (AM) [P(AMPS-co-AM)] or N-isopropylacrylamide (NIPAM) [P(AMPS-co-NIPAM)] as the primary network and polyacrylamide (PAM) as the secondary network. The as-prepared IPN hydrogel of P(AMPS-co-AM)/PAM has a significantly high compressive strength (91.8 MPa), which is 4 times greater than that of the common PAMPS/PAM IPN hydrogel as well as the compressively strongest hydrogel reported in the literature. The P(AMPS-co-AM)/PAM IPN hydrogel is tough enough not to fracture even when the compressive strain reaches 98%. Synchrotron radiation small-angle X-ray scattering (SAXS) analysis has indicated that the presence of an AM comonomer changes the size of the physically cross-linked domains in the IPN hydrogel, which may partially account for its unique mechanical properties. This study has presented the compressively strongest hydrogel reported to date and also provided a novel and feasible method to prepare the highly strong and tough hydrogel.

Addition of perfluorocarbons to alginate hydrogels significantly impacts molecular transport and fracture stress

Perfluorocarbons (PFCs) are used in biomaterial formulations to increase oxygen (O(2) ) tension and create a homogeneous O(2) environment in three-dimensional tissue constructs. It is unclear how PFCs affect mechanical and transport properties of the scaffold, which are critical for robustness, intracellular signaling, protein transport, and overall device efficacy. In this study, we investigate composite alginate hydrogels containing a perfluorooctyl bromide (PFOB) emulsion stabilized with Pluronic(®) F68 (F68). We demonstrate that PFC addition significantly affects biomaterial properties and performance. Solution and hydrogel mechanical properties and transport of representative hydrophilic (riboflavin), hydrophobic (methyl and ethyl paraben), and protein (bovine serum albumin, BSA) solutes were compared in alginate/F68 composite hydrogels with or without PFOB. Our results indicate that mechanical properties of the alginate/F68/PFOB hydrogels are not significantly affected under small strains, but a significant decrease fracture stress is observed. The effective diffusivity D(eff) of hydrophobic small molecules decreases with PFOB emulsion addition, yet the D(eff) of hydrophilic small molecules remained unaffected. For BSA, the D(eff) increased and the loading capacity decreased with PFOB emulsion addition. Thus, a trade-off between the desired increased O(2) supply provided by PFCs and the mechanical weakening and change in transport of cellular signals must be carefully considered in the design of biomaterials containing PFCs.

The development of a dense gas solvent exchange process for the impregnation of pharmaceuticals into porous chitosan

The aim of this study was to prepare stable formulations of poorly water-soluble drugs in amorphous forms to enhance their dissolution rates, promote the bioavailability, minimize the dosage, thereby theoretically decreasing their side effects. A dense gas solvent exchange process was developed for the impregnation of poorly water-soluble drugs such as camptothecin and griseofulvin into a chitosan matrix. The amount of drug impregnated was measured by UV-spectrophotometery and gravimetric techniques. Pore characteristics and the crystallinity of the drugs in the impregnated chitosan were measured. Homogenous nano-sized pores with thin walls were formed in chitosan using the dense gas solvent exchange process. The method was efficient for the impregnation of a drug into chitosan. Results of XRD, Fourier transform infrared spectroscopy and differential scanning calorimetry demonstrated that as a result of interaction between chitosan and the drug, both camptothecin and griseofulvin were in amorphous forms after processing. The dissolution rate of processed griseofulvin was increased threefold due to the hydrophilic properties of chitosan and its interaction with the drug. A new approach was developed for promoting drug bioavailability that has the potential to decrease the required dose and side effects, particularly for chemotherapeutic drugs with narrow therapeutic index.