Amphiphilic polysaccharides: useful tools for the preparation of nanoparticles with controlled surface characteristics

Preparation and Characterization of a Novel Morphosis of Dextran and Its Derivatization with Polyethyleneimine

Dextran, a variant of α-glucan with a significant proportion of α-(1,6) bonds, exhibits remarkable solubility in water. Nonetheless, the precipitation of dextran has been observed in injection vials during storage. The present study aimed to establish a technique for generating insoluble dextran and analyze its structural properties. Additionally, the potential for positively ionizing IS-dextran with polyethyleneimine was explored, with the ultimate objective of utilizing IS-dextran-PEI as a promising support for enzyme immobilization. As a result, IS-dextran was obtained by the process of slow evaporation with an average molecular weight of 6555 Da and a yield exceeding 60%. The calculated crystallinity of IS-dextran, which reaches 93.62%, is indicative of its irregular and dense structure, thereby accounting for its water insolubility. Furthermore, positive charge modification of IS-dextran, coupled with the incorporation of epichlorohydrin, resulted in all zeta potentials of IS-dextran-PEIs exceeding 30 mV, making it a promising supporting factor for enzyme immobilization.

Biosourced Polymeric Emulsifiers for Miniemulsion Copolymerization of Myrcene and Styrene: Toward Biobased Waterborne Latex as Pickering Emulsion Stabilizer

Biobased waterborne latexes were synthesized by miniemulsion radical copolymerization of a biosourced β-myrcene (My) terpenic monomer and styrene (S). Biobased amphiphilic copolymers were designed to act as stabilizers of the initial monomer droplets and the polymer colloids dispersed in the water phase. Two types of hydrophilic polymer backbones were hydrophobically modified by terpene molecules to synthesize two series of amphiphilic copolymers with various degrees of substitution. The first series consists of poly(acrylic acid) modified with tetrahydrogeraniol moieties (PAA-g-THG) and the second series is based on the polysaccharide carboxymethylpullulan amino-functionalized with dihydromyrcenol moieties (CMP-g-(NH-DHM)). The produced waterborne latexes with diameters between 160 and 300 nm and were composed of polymers with varying glass transition temperatures (T_g, PMy = -60 °C, T_{g, P(My-co-S)} = -14 °C, T_g, PS = 105 °C) depending on the molar fraction of biobased β-myrcene (f_My,0 = 0, 0.43, or 1). The latexes successfully stabilized dodecane-in-water and water-in-dodecane emulsions for months at all compositions. The waterborne latexes composed of low T_g poly(β-myrcene) caused interesting different behavior during drying of the emulsions compared to polystyrene latexes.

Advances in thermosensitive polymer-grafted platforms for biomedical applications

Studies on "smart" polymeric material performing environmental stimuli such as temperature, pH, magnetic field, enzyme and photo-sensation have recently paid much attention to practical applications. Among of them, thermo-responsive grafted copolymers, amphiphilic steroids as well as polyester molecules have been utilized in the fabrication of several multifunctional platforms. Indeed, they performed a strikingly functional improvement comparing to some original materials and exhibited a holistic approach for biomedical applications. In case of drug delivery systems (DDS), there has been some successful proof of thermal-responsive grafted platforms on clinical trials such as ThermoDox®, BIND-014, Cynviloq IG-001, Genexol-PM, etc. This review would detail the recent progress and highlights of some temperature-responsive polymer-grafted nanomaterials or hydrogels in the 'smart' DDS that covered from synthetic polymers to nature-driven biomaterials and novel generations of some amphiphilic functional platforms. These approaches could produce several types of smart biomaterials for human health care in future.

Protection of opening lids: very high catalytic activity of lipase immobilized on core-shell nanoparticles

Various hydrophobic supports have been used for lipase immobilization since the active site of lipase can be opened in a hydrophobic environment. Nevertheless, the increase of lipase activity is still limited. This study demonstrates a hyperactivation-protection strategy of lipase after immobilization on poly(n-butyl acrylate)-polyaldehyde dextran (PBA-PAD) core-shell nanoparticles. The inner hydrophobic PBA domain helps to rearrange lipase conformation to a more active form after immobilization into the PAD shell. More importantly, the outer PAD shell with dense polysaccharide chains prevents the immobilized lipase from contact with outside aqueous medium and revert its conformation back to an inactive form. As a result, under optimal conditions the activity of lipase immobilized in PBA-PAD nanoparticles was enhanced 40 times over the free one, much higher than in any previous report. Furthermore, the immobilized lipase retained more than 80 % of its activity after 10 reaction cycles.

O-hexadecyl-dextran entrapped berberine nanoparticles abrogate high glucose stress induced apoptosis in primary rat hepatocytes

Nanotized phytochemicals are being explored by researchers for promoting their uptake and effectiveness at lower concentrations. In this study, O-hexadecyl-dextran entrapped berberine chloride nanoparticles (BC-HDD NPs) were prepared, and evaluated for their cytoprotective efficacy in high glucose stressed primary hepatocytes and the results obtained compared with bulk berberine chloride (BBR) treatment. The nanotized formulation treated primary hepatocytes that were exposed to high glucose (40 mM), showed increased viability compared to the bulk BBR treated cells. BC-HDD NPs reduced the ROS generation by ∼ 3.5 fold during co-treatment, prevented GSH depletion by ∼ 1.6 fold, reduced NO formation by ∼ 5 fold and significantly prevented decline in SOD activity in stressed cells. Lipid peroxidation was also prevented by ∼ 1.9 fold in the presence of these NPs confirming the antioxidant capacity of the formulation. High glucose stress increased Bax/Bcl2 ratio followed by mitochondrial depolarization and activation of caspase-9/-3 confirming involvement of mitochondrial pathway of apoptosis in the exposed cells. Co- and post-treatment of BC-HDD NPs prevented depolarization of mitochondrial membrane, reduced Bax/Bcl2 ratio and prevented externalization of phosphatidyl-serine confirming their anti-apoptotic capacity in those cells. Sub-G1 phase apparent in high glucose stressed cells was not seen in BC-HDD NPs treated cells. The present study reveals that BC-HDD NPs at ∼ 20 fold lower concentration are as effective as BBR in preventing high glucose induced oxidative stress, mitochondrial depolarization and downstream events of apoptotic cell death.

Macromolecular surfactants for miniemulsion polymerization

The use of polymeric surfactants as stabilizers in miniemulsion polymerization was reviewed. The structural characteristics of reported polymeric surfactants were detailed and compared. The concept of multi-functional polymeric surfactants was evidenced. The specificities brought by polymeric surfactants in the process of miniemulsion polymerization in comparison to molecular surfactants were analysed for the stability of the initial monomer emulsion, polymerization kinetics and characteristics of the obtained latexes. The contribution of polymeric surfactants to the control of the characteristics of the obtained nanoparticles was detailed with regard to the nature of the core material and to the surface coverage. Polymeric surfactants can be seen as powerful tools for the design of original nanoparticles. On the basis of the available data, possible research topics are suggested.

Poly(n-butyl cyanoacrylate) nanoparticles via miniemulsion polymerization (1): dextran-based surfactants

This study aims at synthesizing polysaccharide-coated poly(n-butyl cyanoacrylate) nanoparticles by miniemulsion polymerization. Because of the high reactivity of n-butyl cyanoacrylate, drastic conditions are required in order to emulsify the monomer in water while limiting its anionic polymerization. However, nanoparticles were successfully obtained by miniemulsion polymerization of butyl cyanoacrylate-in-water emulsions stabilized by amphiphilic dextran derivatives. Their physico-chemical properties were thoroughly investigated as a function of amphiphilic dextran structure and concentration. The substitution degree of the amphiphilic dextran used as stabilizer had little influence on the final properties of the obtained nanoparticles. Particle size decreased with the concentration of amphiphilic dextran in the aqueous phase whereas the hydrophilic layer thickness and the amount of adsorbed polysaccharide were nearly constant in the entire range of concentrations studied.

Synthesis of an Amphiphilic Polysaccharide Derivative and Its Micellization for Drug Release

A new route for the synthesis of novel amphiphilic polysaccharides was developed, in which a synthetic biodegradable poly(ε-caprolactone) was capped with a phenylalanine group (PCL-phenylalanine). The ring-opening polymerization of ε-caprolactone (ε-CL) was carried out in the absence of a metal catalyst with L-phenylalanine as the initiator; this was followed by a coupling reaction with biodegradable dextran in the presence of carbonyldimidazole. The FTIR and 1H NMR analyses confirm the coupling reaction. Fluorescence, transmission electron microscopy (TEM), and dynamic light scattering (DLS) confirm that in aqueous solution the amphiphilic polysaccharides self-assemble into the nanoscale spherical micelles with good stability. The in vitro drug release behavior of the nonsteroidal indomethacin drug exhibits sustained drug release profile as described by the Higuchi model without a burst effect.

Nanoparticles of hydrophobically modified dextrans as potential drug carrier systems

Nanoparticles combining a hydrophobically modified dextran core and a polysaccharide surface coverage were elaborated. Their suitability for applications like drug delivery was evaluated. The selected polysaccharide, dextran, was chemically modified by the covalent attachment of hydrocarbon groups (aliphatic or aromatic) via the formation of ether links. According to the extent of modification, either water-soluble or water-insoluble dextran derivatives were obtained. The latter exhibited solubility in organic solvents like tetrahydrofuran or dichloromethane saturated with water. Water-soluble dextran derivatives were used as polymeric surfactants for the control of nanoparticles surface characteristics. Nanoparticles were prepared either by o/w emulsion or solvent-diffusion methods. The size and surface properties of dextran nanoparticles were correlated to processing conditions. The stability of colloidal suspensions was examined as a function of ionic strength and related to the particle surface characteristics. The redispersability of freeze-dried suspensions without the addition of cryoprotectant was demonstrated. Finally, the degradability of modified dextrans was compared to that of starting dextran, after enzymatic hydrolysis in the presence of dextranase.

Surfactive water-soluble copolymers for the preparation of controlled surface nanoparticles by double emulsion/solvent evaporation

We have already shown that polylactide (PLA) nanoparticles covered with a hydrophilic polymeric layer can be prepared by simple emulsion/solvent evaporation by using amphiphilic copolymers as surfactants during the procedure. The external layer is then constituted by the hydrophilic part of the macromolecular surfactant. This kind of nanospheres is useful for the encapsulation of lipohilic molecules. The use of amphiphilic copolymers as surfactants in the preparation of PLA nanospheres with controlled surface properties, was then applied to the double emulsion/solvent evaporation procedure. The aim was to allow the encapsulation of water-soluble bioactive molecules in PLA particles with controlled surface properties. In this paper, we describe the results obtained with three different water-soluble monomethoxypolyethylene oxide (MPEO)-b-PLA diblock copolymers used as surfactants in the preparation of nanoparticles by double emulsion/solvent evaporation. After organic solvent evaporation, the obtained nanospheres were proved to be really covered by a MPEO layer whose characteristics were determined. It was firstly shown that the MPEO-covered particles did not flocculate at 25 degrees C, even in 4 M NaCl while suspensions of bare nanospheres were destabilized for a NaCl concentration as low as 0.04 M. On the other hand, the suspensions of MPEO-covered nanoparticles in 0.3 M Na2SO4 were found to be very sensitive to temperature as they flocculated at a temperature lying between 45 and 55 degrees C depending on the MPEO-b-PLA composition. This property was attributed to the fact that MPEO is a polymer with a low critical solution temperature. The concentration of MPEO at the nanoparticle surface was then calculated for the three kinds of particles, from the initial flocculation temperature, and was found to be comparable to the value determined directly.

Aqueous Solutions of Native and Hydrophobically Modified Polysaccharides: Temperature Effect

Amphiphilic polysaccharides, obtained by the attachment of various hydrocarbon groups onto dextran, are studied in aqueous solutions. The viscosity of their aqueous solutions is examined as a function of concentration and temperature in the range 25-65 degrees C. Varying polymer concentration, viscosity follows a polynomial development of Huggins equation in which the coefficients can be calculated from the Huggins constant determined in the dilute domain (Matsuoka-Cowman equation). For all polymers, the solution viscosity follows an Arrhenius-like variation with temperature. The activation energy of the aqueous solutions is determined as a function of polymer concentration and structural characteristics (nature and amount of grafted hydrocarbon groups). The variation of activation energy with polymer concentration is shown to be consistent with predictions based on the Matsuoka-Cowman equation combined with the equation of Andrade. This conclusion is extended to other polysaccharides using data from the literature.

Miniemulsion polymerization of styrene using a pH-responsive cationic diblock macromonomer and its nonreactive diblock copolymer counterpart as stabilizers

The miniemulsion polymerization of styrene has been carried out using two pH-responsive cationic diblock macromonomers as reactive stabilizers. As a comparison, the analogous nonpolymerizable cationic diblock copolymer was also investigated. Each of these three stabilizers based on 2-(diethylaminoethyl)methacrylate and quaternized 2-(dimethylaminoethyl)methacrylate residues were prepared via oxyanionic polymerization and had relatively low polydispersities. It was found that all three copolymers were grafted to the polystyrene latex particles, as judged by X-ray photoelectron spectroscopy, aqueous electrophoresis and FTIR spectroscopy studies. Kinetics studies and colloidal characteristics indicated poorer stabilization properties of the partially quaternized diblock macromonomer and electron microscopy confirmed that the latexes invariably had relatively broad particle size distributions.