Side effect reduction of encapsulated hydrocortisone crystals by insulin/alginate shells

Electrospun poly(lactic acid) fibers containing novel chlorhexidine particles with sustained antibacterial activity

The treatment of persistent infections often requires a high local drug concentration and sustained release of antimicrobial agents. This paper proposes the use of novel electrospinning of poly(lactic acid) (PLA) fibers containing uncoated and encapsulated chlorhexidine particles. Chlorhexidine particles with a mean (SD) diameter of 17.15 ± 1.99 μm were fabricated by the precipitation of chlorhexidine diacetate with calcium chloride. Layer-by-layer (LbL) encapsulation of the chlorhexidine particles was carried out to produce encapsulated particles. The chlorhexidine particles had a high chlorhexidine content (90%), and when they were electrospun into PLA fibers a bead-in-string structure was obtained. The chlorhexidine content in the fibers could be tuned and a sustained release over 650 h was produced, via chlorhexidine particle encapsulation. Chlorhexidine release was governed by the polyelectrolyte multilayer encapsulation as demonstrated by SEM and confocal imaging. The incorporation of uncoated and encapsulated chlorhexidine particles (0.5% and 1% wt/wt chlorhexidine) into the fibers did not cause toxicity to healthy fibroblasts or affect cell adhesion to the fibers over a period of 5 days. The chlorhexidine-containing fibers also demonstrated sustained antibacterial activity against E. coli via an agar diffusion assay and broth transfer assay. Therefore, the chlorhexidine-containing PLA fibers may be useful in the treatment of persistent infections in medicine and dentistry.

Gold Nanorod Mediated Chlorhexidine Microparticle Formation and Near-Infrared Light Induced Release

Gold nanorods (GNR) are good light harvesting species for elaboration of near-infrared (NIR) responsive drug delivery systems. Herein, chlorhexidine microparticles are grown directly on the surface of gold nanorods and then stabilized with polyelectrolyte multilayer encapsulation, producing novel composite drug-GNR particles with high drug loading and NIR light sensitivity. Crystallization of chlorhexidine is caused by the ionic strength of the chloride solution that has been demonstrated via formation of a homogeneous porous spherical structure at 0.33 M CaCl₂. By introducing GNRs into the CaCl₂ solution, the nucleation of chlorhexidine molecules and size of produced spheres are affected, since GNRs act as sites for chlorhexidine nucleation. Similarly, when GNRs are replaced by chlorhexidine seeds (5.2 ± 1.7 μm), a core-shell crystal structure is observed. The encapsulated GNR/chlorhexidine composites are responsive to NIR light (840 nm) that increases the temperature at the chlorhexidine crystals, followed by microparticle dissolution and rupture of capsules which is illustrated with confocal microscopy and SEM. Furthermore, a stepwise burst release of chlorhexidine can be induced by multiple cycles of NIR light exposure. The GNR/chlorhexidine composites show good biocompatibility and antimicrobial activity. The proposed method of antibacterial drug release may therefore indicate that this NIR responsive chlorhexidine composite may be useful for future clinical applications.

Improvement of side-effects and treatment on the experimental colitis in mice of a resin microcapsule-loading hydrocortisone sodium succinate

CONTEXT

Extensive or long-time use of corticosteroids often causes many toxic side-effects. The ion exchange resins and the coating material, Eudragit, can be used in combination to form a new oral delivery system to deliver corticosteroids.

OBJECTIVES

The resin microcapsule (DRM) composed by Amberlite 717 and Eudragit S100 was used to target hydrocortisone (HC) to the colon in order to improve its treatment effect on ulcerative colitis (UC) and reduce its toxic side-effects.

METHODS

Hydrocortisone sodium succinate (HSS) was sequentially encapsulated in Amberlite 717 and Eudragit S100 to prepare the HSS-loaded resin microcapsule (HSS-DRM). The scanning electron microscopy (SEM) was employed to investigate the morphology and structure of HSS-DRM. The in vitro release and in vivo studies of pharmacokinetics and intestinal drug residues in rat were used to study the colon-targeting of HSS-DRM. The mouse induced by 2,4,6-trinitrobenzenesulfonic acid was used to study the treatment of HSS-DRM on experimental colitis.

RESULTS

SEM study showed good morphology and structure of HSS-DRM. In the in vitro release study, > 80% of HSS was released in the colon environment (pH 7.4). The in vivo studies showed good colon-targeting of HSS-DRM (T_max= 0.97 h, C_max= 118.28 µg/mL of HSS; T_max = 2.16 h, C_max = 64.47 µg/mL of HSS-DRM). Moreover, the HSS-DRM could reduce adverse reactions induced by HSS and had good therapeutic effects on the experimental colitis.

CONCLUSIONS

The resin microcapsule system has good colon-targeting and can be used in the development of colon-targeting preparations.

Molecular Assembly of Polysaccharide-Based Microcapsules and Their Biomedical Applications

Advanced multifunctional microcapsules have revealed great potential in biomedical applications owing to their tunable size, shape, surface properties, and stimuli responsiveness. Polysaccharides are one of the most acceptable biomaterials for biomedical applications because of their outstanding virtues such as biocompatibility, biodegradability, and low toxicity. Many efforts have been devoted to investigating novel molecular design and efficient building blocks for polysaccharide-based microcapsules. In this Personal Account, we first summarize the common features of polysaccharides and the main principles of the design and fabrication of polysaccharide-based microcapsules, and further discuss their applications in biomedical areas and perspectives for future research.

Novel Formulation of Chlorhexidine Spheres and Sustained Release with Multilayered Encapsulation

This work demonstrates the synthesis of new chlorhexidine polymorphs with controlled morphology and symmetry, which were used as a template for layer-by-layer (LbL) encapsulation. LbL self-assembly of oppositely charged polyelectrolytes onto the drug surface was used in the current work, as an efficient method to produce a carrier with high drug content, improved drug solubility and sustained release. Coprecipitation of the chlorhexidine polymorphs was performed using chlorhexidine diacetate and calcium chloride solutions. Porous interconnected chlorhexidine spheres were produced by tuning the concentration of calcium chloride. The size of these drug colloids could be further controlled from 5.6 μm to over 20 μm (diameter) by adjusting the coprecipitation temperature. The chlorhexidine content in the spheres was determined to be as high as 90%. These particles were further stabilized by depositing 3.5 bilayers of poly(allylamine hydrochloride) (PAH) and polystyrenesulfonate (PSS) on the surface. In vitro release kinetics of chlorhexidine capsules showed that the multilayer shells could prolong the release, which was further demonstrated by characterizing the remaining chlorhexidine capsules with SEM and confocal microscopy. The new chlorhexidine polymorph and LbL coating has created novel chlorhexidine formulations. Further modification to the chlorhexidine polymorph structure is possible to achieve both sustained and stimuli responsive release, which will enhance its clinical performance in medicine and dentistry.

Bacteria-triggered degradation of nanofilm shells for release of antimicrobial agents

Due to an increase in lifestyle diseases in the developed world, the number of chronic wounds is increasing at a fast pace. Chronic wound infections are common and systemic antibiotics are usually used as a treatment. In this paper we describe an approach to encapsulate antimicrobial agents in hollow microcapsules covered with a nanofilm shell that degrades through the action of a virulence factor from Pseudomonas aeruginosa. The shell was assembled using the layer-by-layer (LbL) technique with poly-l-lysine and hyaluronic acid. The microcapsules were loaded with a model substrate or a drug. By crosslinking the components in the nanofilm, the film remained intact when exposed to human wound proteases. However, the film was degraded and the drug exposed when in contact with Pseudomonas aeruginosa's Lys-X specific protease IV. The antimicrobial efficacy of the drug-loaded microcapsules was confirmed by exposure to virulent Pseudomonas aeruginosa. The current study contributes to the establishment of a release platform for targeted treatment of topical infections with the aim of minimizing both overexposure to drugs and development of bacterial resistance.

Investigation of the colon-targeting, improvement on the side-effects and therapy on the experimental colitis in mouse of a resin microcapsule loading dexamethasone sodium phosphate

CONTEXT

Dexamethasone is the major drug in the treatment of ulcerative colitis (UC). However, the extensive or long-time use of dexamethasone causes many toxic side-effects. Ion exchange resins react with external-ions through their own functional groups and Eudragit S occurs degradation when pH > 7. These features make them suitable for oral delivery system.

OBJECTIVE

Resin microcapsule (DRM) composed by 717 anion exchange resin and Eudragit S100 was used to target dexamethasone to the colon to improve its treatment effect on UC and reduce its toxic side-effects.

RESULTS

Dexamethasone sodium phosphate (DXSP) was sequentially encapsulated in 717 anion-exchange resin and Eudragit S100 to prepare the DXSP-loaded resin microcapsule (DXSP-DRM). The in vitro release study and in vivo study of pharmacokinetics and the intestinal drug residues in rat demonstrated the good colon-targeting of DXSP-DRM. Moreover, the DXSP-DRM can reduce the toxic side-effects induced by DXSP and have good therapeutic effects on colitis mouse induced by 2,4,6-trinitrobenzenesulfonic acid.

DISCUSSION

Dexamethasone can be targeted to the colon by DRM, thereby enhancing its treatment effect and reducing its toxic side effects.

CONCLUSION

The resin microcapsule system has good colon-targeting and can be used in the development of colon-targeted preparations.

Supramolecular core-shell nanosilica@liposome nanocapsules for drug delivery

The fabrication of core-shell structural nanosilica@liposome nanocapsules as a drug delivery vehicle is reported. SiO(2) nanoparticles are encapsulated within liposomes by a W/O/W emulsion approach to form supramolecular assemblies with a core of colloidal particles enveloped by a lipid bilayer shell. A nanosilica core provides charge compensation and architectural support for the lipid bilayer, which significantly improves their physical stability. A preliminary application of these core-shell nanocapsules for hemoglobin (Hb) delivery is described. Through the H-bonding interaction between the hydroxyl groups on nanosilicas and the amino nitrogens of Hb, Hb-SiO(2) nanocomplexes in which the saturated adsorption amount of Hb on SiO(2) is 0.47 g g(-1) are coated with lipids to generate core-shell Hb-SiO(2)@liposome nanocapsules with mean diameters of 60-500 nm and Hb encapsulation efficiency of 48.4-87.9%. Hb-SiO(2)@liposome supramolecular nanovehicles create a mode of delivery that stabilizes the encapsulated Hb and achieves long-lasting release, thereby improving the efficacy of the drug. Compared with liposome-encapsulated Hb and Hb-loaded SiO(2) particles, such core-shell nanovehicles show substantially enhanced release performance of Hb in vitro. This finding opens up a new window of liposome-based formulations as drug delivery nanovehicles for widespread pharmaceutical applications.

Introduction to nanocoatings produced by layer-by-layer (LbL) self-assembly

Studies on the adsorption of oppositely charged colloidal particles ultimately resulted in multilayered polyelectrolyte self-assembly. The inception of layer-by-layer constructed particles facilitated the production of multifunctional, stimuli-responsive carrier systems. An array of synthetic and natural polyelectrolytes, metal oxides and clay nanoparticles is available for the construction of multilayered nanocoats on a multitude of substrates or removable cores. Numerous substrates can be encapsulated utilizing this technique including dyes, enzymes, drugs and cells. Furthermore, the outer surface of the particles presents and ideal platform that can be functionalized with targeting molecules or catalysts. Some processing parameters determining the properties of these successive self-assembly constructs are the surface charge density, coating material concentration, rinsing and drying steps, temperature and ionic strength of the medium. Additionally, the simplicity of the layer-by-layer assembly technique and the availability of established characterization methods, render these constructs extremely versatile in applications of sensing, encapsulation and target- and trigger-responsive drug delivery.