Effect of cationic polymers on foam rheological properties

Friction Dynamics of Foams under Nonlinear Motion

Foams are viscoelastic soft materials with complex mechanical properties. Here, we evaluated the friction dynamics of foams between acrylic plates using a sinusoidal motion friction evaluation system and we found some interesting characteristics under accelerated conditions. On a typical solid surface, a symmetrical friction profile, in which static and kinetic frictions are observed, is obtained under reciprocating nonlinear motion. Meanwhile, significant lubricant effects and velocity-dependent friction profiles without static friction were observed in foams. The friction force in foams increased in proportion to the power of velocity, with a power index of <1. These characteristic and dynamic phenomena in foams were observed in this study. They had been caused by the formation of a thick lubricant film and various dissipative modes including surfactant diffusion, viscous dissipation, and wall slip of bubbles. Moreover, the addition of a thickener increased the friction force and the delay time of friction response and improved the foam durability against normal force and shear. These findings are useful for understanding dynamic phenomena in soft materials.

Impact of polyelectrolyte-surfactant interactions on the rheology and wet lubrication performance of conditioning shampoo

OBJECTIVE

The purpose of this study is to understand the impact of the cationic polymer merquat on the rheological behavior of the mixed surfactant system of sodium lauryl ether sulfate (SLES) and cocamidopropyl betaine (CapB) as well as the impact of varying formulation conditions on the wet lubrication performance of the SLES-CapB-Merquat system.

METHODS

Rotation mechanical Rheometry was used to study the rheological response of the SLES-CapB-Merquat systems. Frequency sweeps were conducted to analyze the rheological properties of the system at low frequency ranges and bulk viscosity of the system was studied at high shear rates at varying salt and polymer concentrations. Wet combing tests and hair friction tests were run on the Dia-stron MTT175 flexible miniature tensile tester in order to evaluate the conditioning effects of the different formulations.

RESULTS

The SLES-CapB system on its own exhibits very little viscosity. The bulk rheology results show that the addition of Merquat enhances the viscosity and viscoelastic properties of the SLES-CapB-Merquat system indicating the presence of electrostatic interactions between the surfactant and polyelectrolyte. Addition of salt had a significant impact on the system's rheological response due to the charge screening effect of salt. Wet combing force data indicate that the charged polyelectrolyte binds to the hair substrate resulting in reduced combing force values after the product was applied. The addition of silicone oil to the formulation seemed to greatly enhance the conditioning effect of the formulation.

CONCLUSION

The charge interactions between SLES, CapB and Merquat results in the formation of an integrated gel like network, thus building the viscosity of the system. Variation of parameters like polymer and salt concentration has the potential to modify the bulk rheological properties and consequently the wet lubrication properties of the system.

Origin of the extremely high elasticity of bulk emulsions, stabilized by Yucca Schidigera saponins

We found experimentally that the elasticity of sunflower oil-in-water emulsions (SFO-in-W) stabilized by Yucca Schidigera Roezl saponin extract, is by >50 times higher as compared to the elasticity of common emulsions. We revealed that strong specific interactions between the phytosterols from the non-purified oil and the saponins from the Yucca extract lead to the formation of nanostructured adsorption layers which are responsible for the very high elasticity of the oil-water interface and of the respective bulk emulsions. Remarkably, this extra high emulsion elasticity inhibits the emulsion syneresis even at 65 vol% of the oil drops - these emulsions remain homogeneous and stable even after 30 days of shelf-storage. These results demonstrate that the combination of saponin and phytosterols is a powerful new approach to structure oil-in-water emulsions with potential applications for formulating healthier functional food.

Role of interfacial elasticity for the rheological properties of saponin-stabilized emulsions

HYPOTHESIS

Saponins are natural surfactants which can provide highly viscoelastic interfaces. This property can be used to quantify precisely the effect of interfacial dilatational elasticity on the various rheological properties of bulk emulsions.

EXPERIMENTS

We measured the interfacial dilatational elasticity of adsorption layers from four saponins (Quillaja, Escin, Berry, Tea) adsorbed on hexadecane-water and sunflower oil-water interfaces. In parallel, the rheological properties under steady and oscillatory shear deformations were measured for bulk emulsions, stabilized by the same saponins (oil volume fraction between 75 and 85%).

FINDINGS

Quillaja saponin and Berry saponin formed solid adsorption layers (shells) on the SFO-water interface. As a consequence, the respective emulsions contained non-spherical drops. For the other systems, the interfacial elasticities varied between 2 mN/m and 500 mN/m. We found that this interfacial elasticity has very significant impact on the emulsion shear elasticity, moderate effect on the dynamic yield stress, and no effect on the viscous stress of the respective steadily sheared emulsions. The last conclusion is not trivial, because the dilatational surface viscoelasticity is known to have strong impact on the viscous stress of steadily sheared foams. Mechanistic explanations of all observed effects are described.

Physiological and Pharmaceutical Considerations for Rectal Drug Formulations

Although the oral route is the most convenient route for drug administration, there are a number of circumstances where this is not possible from either a clinical or pharmaceutical perspective. In these cases, the rectal route may represent a practical alternative and can be used to administer drugs for both local and systemic actions. The environment in the rectum is considered relatively constant and stable and has low enzymatic activity in comparison to other sections of the gastrointestinal tract. In addition, drugs can partially bypass the liver following systemic absorption, which reduces the hepatic first-pass effect. Therefore, rectal drug delivery can provide significant local and systemic levels for various drugs, despite the relatively small surface area of the rectal mucosa. Further development and optimization of rectal drug formulations have led to improvements in drug bioavailability, formulation retention, and drug release kinetics. However, despite the pharmaceutical advances in rectal drug delivery, very few of them have translated to the clinical phase. This review will address the physiological and pharmaceutical considerations influencing rectal drug delivery as well as the conventional and novel drug delivery approaches. The translational challenges and development aspects of novel formulations will also be discussed.

Thermodynamics, interfacial pressure isotherms and dilational rheology of mixed protein-surfactant adsorption layers

Proteins and their mixtures with surfactants are widely used in many applications. The knowledge of their solution bulk behavior and its impact on the properties of interfacial layers made great progress in the recent years. Different mechanisms apply to the formation process of protein/surfactant complexes for ionic and non-ionic surfactants, which are governed mainly by electrostatic and hydrophobic interactions. The surface activity of these complexes is often remarkably different from that of the individual protein and has to be considered in respective theoretical models. At very low protein concentration, small amounts of added surfactants can change the surface activity of proteins remarkably, even though no strongly interfacial active complexes are observed. Also small added amounts of non-ionic surfactants change the surface activity of proteins in the range of small bulk concentrations or surface coverages. The modeling of the equilibrium adsorption behavior of proteins and their mixtures with surfactants has reached a rather high level. These models are suitable also to describe the high frequency limits of the dilational viscoelasticity of the interfacial layers. Depending on the nature of the protein/surfactant interactions and the changes in the interfacial layer composition rather complex dilational viscoelasticities can be observed and described by the available models. The differences in the interfacial behavior, often observed in literature for studies using different experimental methods, are at least partially explained by a depletion of proteins, surfactants and their complexes in the range of low concentrations. A correction of these depletion effects typically provides good agreement between the data obtained with different methods, such as drop and bubble profile tensiometry.

Detailed Structural and Mechanical Response of Wet Foam to the Settling Particle

Liquid foam, as a complex fluid, provides an observable prototype for studying a discrete fluid system. In this work, a numerical study on the settling behavior of a round particle in wet polydisperse foam has been conducted on the bubble scale. The local and nonuniform distribution of bubble pressure, as well as the localized plastic events, is presented. It shows a foam region of higher pressure in front of the settling particle due to the extrusion deformation of the bubbles applied by the particle. Additionally, the forces exerted on the particle by the disordered wet foam are measured during the sedimentation. It exhibits in particular a power-law dependence of the drag force caused by the bubble as a function of the foam quality. Moreover, sedimentation experiments are demonstrated to verify this power-law relation. The evolution of the components of drag force is demonstrated when a plastic event occurs in front of the settling particle. The result shows that both the contributions of the pulling force of foam films and the bubble pressure to the drag force decrease in that case. Likewise, the variation of both these contributions to the drag force is illustrated as well when a bubble in the wake detaches from the particle. These results assist in understanding the mesoscopic response of wet foam to a settling particle.

Efficient control of the rheological and surface properties of surfactant solutions containing C8-C18 fatty acids as cosurfactants

Systematic experimental study is performed about the effects of chain length (varied between C8 and C18) and concentration of fatty acids (FAc), used as cosurfactants to the mixture of the anionic surfactant SLES and the zwitterionic surfactant CAPB. The following properties are studied: bulk viscosity of the concentrated solutions (10 wt % surfactants), dynamic and equilibrium surface tensions, surface modulus, and foam rheological properties for the diluted foaming solutions (0.5 wt % surfactants). The obtained results show that C8-C10 FAc induce formation of wormlike micelles in the concentrated surfactant solutions, which leads to transformation of these solutions into viscoelastic fluids with very high apparent viscosity. The same FAc shorten the characteristic adsorption time of the diluted solutions by more than 10 times. In contrast, C14-C18 FAc have small effect on the viscosity of the concentrated solutions but increase the surface modulus above 350 mN/m, which leads to higher friction inside sheared foams and to much smaller bubbles in the formed foams. The intermediate chain C12 FAc combines some of the properties seen with C10 FAc and other properties seen with C14 FAc. These results clearly demonstrate how appropriate cosurfactants can be used for efficient control of the rheological properties of concentrated surfactant solutions and of some important foam attributes, such as bubble size and foam rheology.