Temperature-programmed electrospray-differential mobility analysis for characterization of ligated nanoparticles in complex media

Nanometal Thermocatalysts: Transformations, Deactivation, and Mitigation

Nanometals have been proven to be efficient thermocatalysts in the last decades. Their enhanced catalytic activity and tunable functionalities make them intriguing candidates for a wide range of catalytic applications, such as gaseous reactions and compound synthesis/decomposition. On the other hand, the enhanced specific surface energy and reactivity of nanometals can lead to configuration transformation and thus catalytic deactivation during the synthesis and catalysis, which largely undermines the activity and service time, thereby calling for urgent research effort to understand the deactivating mechanisms and develop efficient mitigating methods. Herein, the recent progress in understanding the configuration transformation-induced catalytic deactivation within nanometals is reviewed. The major pathways of configuration transformations, and their kinetics controlled by the environmental factors are presented. The approaches toward mitigating the transformation-induced deactivation are also presented. Finally, a perspective on the future academic approaches toward in-depth understanding of the kinetics of the deactivation of nanometals is proposed.

Multidimensional Nanoparticle Characterization through Ion Mobility-Mass Spectrometry

Multidimensional techniques that combine fully or partially orthogonal characterization methods in a single setup often provide a more comprehensive description of analytes. When applied to nanoparticles, they have the potential to reveal particle properties not accessible to more conventional 1D techniques. Herein, we apply recently developed 2D characterization techniques to nanoparticles using atmospheric-pressure ion mobility-mass spectrometry (IM-MS), and we demonstrate the analytical capability of this approach using ultraporous mesostructured silica nanoparticles (UMNs). We show that IM-MS yields a 2D particle size-mass distribution function, which in turn can be used to calculate not only important 1D distributions, i.e. particle size distributions, but also nanoparticle structural property distributions not accessible by other methods, including size-dependent particle porosity and the specific pore volume distribution function. IM-MS measurement accuracy was confirmed by measurement of NIST-certified polystyrene latex particle standards. For UMNs, comparison of IM-MS results with TEM and N₂ physisorption yields quantitative agreement in particle size and qualitative agreement in average specific pore volume. IM-MS uniquely shows how within a single UMN population, porosity increases with increasing particle size, consistent with the proposed UMN growth mechanism. In total, we demonstrate the potential of IM-MS as a standard approach for the characterization of structurally complex nanoparticle populations, as it yields size-specific structural distribution functions.

Virus-like particle size and molecular weight/mass determination applying gas-phase electrophoresis (native nES GEMMA)

(Bio-)nanoparticle analysis employing a nano-electrospray gas-phase electrophoretic mobility molecular analyzer (native nES GEMMA) also known as nES differential mobility analyzer (nES DMA) is based on surface-dry analyte separation at ambient pressure. Based on electrophoretic principles, single-charged nanoparticles are separated according to their electrophoretic mobility diameter (EMD) corresponding to the particle size for spherical analytes. Subsequently, it is possible to correlate the (bio-)nanoparticle EMDs to their molecular weight (M_W) yielding a corresponding fitted curve for an investigated analyte class. Based on such a correlation, (bio-)nanoparticle M_W determination via its EMD within one analyte class is possible. Turning our attention to icosahedral, non-enveloped virus-like particles (VLPs), proteinaceous shells, we set up an EMD/M_W correlation. We employed native electrospray ionization mass spectrometry (native ESI MS) to obtain M_W values of investigated analytes, where possible, after extensive purification. We experienced difficulties in native ESI MS with time-of-flight (ToF) detection to determine M_W due to sample inherent characteristics, which was not the case for charge detection (CDMS). nES GEMMA exceeds CDMS in speed of analysis and is likewise less dependent on sample purity and homogeneity. Hence, gas-phase electrophoresis yields calculated M_W values in good approximation even when charge resolution was not obtained in native ESI ToF MS. Therefore, both methods-native nES GEMMA-based M_W determination via an analyte class inherent EMD/M_W correlation and native ESI MS-in the end relate (bio-)nanoparticle M_W values. However, they differ significantly in, e.g., ease of instrument operation, sample and analyte handling, or costs of instrumentation.

Co-delivery of Cyclopamine and Doxorubicin Mediated by Bovine Serum Albumin Nanoparticles Reverses Doxorubicin Resistance in Breast Cancer by Down-regulating P-glycoprotein Expression

Combination chemotherapy is considered to be one of the most effective treatments for breast cancer by reducing the emergence of drug resistance. In this study, a novel drug delivery system based on bovine serum albumin nanoparticles (BSA NPs) was successfully developed. Doxorubicin (DOX) and cyclopamine (CYC), a potential anti-cancer agent that inhibits the hedgehog signaling pathway were entrapped into BSA NPs through electrostatic interactions and hydrophobic interactions, respectively. Rather than simple combination of two different chemotherapeutics, the CYC also increased the intracellular DOX accumulation by decreasing the expression of P-glycoprotein (P-gp), which could thus reverse the DOX resistance. Tumor-targeting property of nanoparticles was the prerequisite for its further application. Interestingly, retention of fluorescently-labeled particles in vivo indicated that the dual-drug-loaded BSA NPs could not only target the primary tumors, but also target the metastatic lymph nodes, which would simultaneously inhibit the tumor growth and distant metastasis. Taken together, this study provides a promising strategy for co-delivery of drugs, tumor and metastatic lymph node targeting, and DOX resistance reversing in breast cancer chemotherapy.

Number Concentration of Gold Nanoparticles in Suspension: SAXS and spICPMS as Traceable Methods Compared to Laboratory Methods

The industrial exploitation of high value nanoparticles is in need of robust measurement methods to increase the control over product manufacturing and to implement quality assurance. InNanoPart, a European metrology project responded to these needs by developing methods for the measurement of particle size, concentration, agglomeration, surface chemistry and shell thickness. This paper illustrates the advancements this project produced for the traceable measurement of nanoparticle number concentration in liquids through small angle X-ray scattering (SAXS) and single particle inductively coupled plasma mass spectrometry (spICPMS). It also details the validation of a range of laboratory methods, including particle tracking analysis (PTA), dynamic light scattering (DLS), differential centrifugal sedimentation (DCS), ultraviolet visible spectroscopy (UV-vis) and electrospray-differential mobility analysis with a condensation particle counter (ES-DMA-CPC). We used a set of spherical gold nanoparticles with nominal diameters between 10 nm and 100 nm and discuss the results from the various techniques along with the associated uncertainty budgets.

Review of analytical studies on TiO2 nanoparticles and particle aggregation, coagulation, flocculation, sedimentation, stabilization

Titanium dioxide (TiO₂) nanoparticles (NPs) have been widely used in industrial and consumer products. Comprehensive and accurate detection, characterization, and quantification of TiO₂ NPs are important for understanding the specific property, behavior, fate, and potential risk of TiO₂ NPs in natural and engineered environments. This review provides a summary of recent analytical studies of TiO₂ NPs and their aggregation, coagulation, flocculation, sedimentation, stabilization under a wide range of conditions and processes. Much attention is paid on sample preparation prior to an analytical procedure, analysis of particle size, morphology, structure, state, chemical composition, surface properties, etc., via measurements of light scattering and zeta potential, microscopy, spectroscopy, and related techniques. Recently, some advanced techniques have also been explored to characterize TiO₂ NPs and their behaviors in the environment. Many issues must be considered including distinction between engineered TiO₂ NPs and their naturally occurring counterparts, lack of reference materials, interlaboratory comparison, when analyzing low concentrations of TiO₂ NPs and their behaviors in complex matrices. No "ideal" technique has emerged as each technique has its own merits, biases, and limitations. Multi-method approach is highlighted to provide in-depth information. Improvements of analytical method for determination of TiO₂ NPs have been recommended to be together with exposure modelers and ecotoxicologists for maximum individual and mutual benefit. Future work should focus on developing analytical technology with the advantages of being reliable, sensitive, selective, reproducible, and capable of in situ detection in complicated sample system.

Thermal Stability of Metal-Organic Frameworks and Encapsulation of CuO Nanocrystals for Highly Active Catalysis

We report an aerosol-based approach to study the thermal stability of metal-organic frameworks (MOFs) for gas-phase synthesis of MOF-based hybrid nanostructures used for highly active catalysis. Temperature-programmed electrospray-differential mobility analysis (TP-ES-DMA) provides the characterization of temperature-dependent morphological change directly in the gas phase, and the results are shown to be highly correlated with the structural thermal stability of MOFs determined by the traditional measurements of porosity and crystallinity. The results show that MOFs underwent thermal decomposition via simultaneous disassembly and deaggregation. Trimeric Cr-based MIL-88B-NH₂ exhibited a higher temperature of decomposition ( T_d), 350 °C, than trimeric Fe-based MIL-88B-NH₂, 250 °C. For UiO-66, a significant decrease of T_d by ≈100 °C was observed by using amine-functionalized ligands in the MOF structure. Copper oxide nanocrystals were successfully encapsulated in the UiO-66 crystal (Cu _xO@UiO-66) by using a gas-phase evaporation-induced self-assembly approach followed by a suitable thermal treatment below T_d (i.e., determined by TP-ES-DMA). Cu _xO@UiO-66 demonstrated a very high catalytic activity and stability to CO oxidation, showing at least a 3-time increase in CO conversion compared to the bare CuO nanoparticle samples. The study demonstrates a prototype methodology (1) to determine structural thermal stability of MOFs using a gas-phase electrophoretic method (TP-ES-DMA) and (2) to gas-phase synthesize CuO nanocrystals encapsulated in MOFs.

Surface Modification of Cisplatin-Complexed Gold Nanoparticles and Its Influence on Colloidal Stability, Drug Loading, and Drug Release

Cisplatin-complexed gold nanoparticles (Pt^II-AuNP) provide a promising strategy for chemo-radiation-based anticancer drugs. Effective design of such platforms necessitates reliable assessment of surface engineering on a quantitative basis and its influence on drug payload, stability, and release. In this paper, poly(ethylene glycol) (PEG)-stabilized Pt^II-AuNP was synthesized as a model antitumor drug platform, where Pt^II is attached via a carboxyl-terminated dendron ligand. Surface modification by PEG and its influence on drug loading, colloidal stability, and drug release were assessed. Complexation with Pt^II significantly degrades colloidal stability of the conjugate; however, PEGylation provides substantial improvement of stability in conjunction with an insignificant trade-off in drug loading capacity compared with the non-PEGylated control (<20% decrease in loading capacity). In this context, the effect of varying PEG concentration and molar mass was investigated. On a quantitative basis, the extent of PEGylation was characterized and its influence on dispersion stability and drug load was examined using electrospray differential mobility analysis (ES-DMA) hyphenated with inductively coupled plasma mass spectrometry (ICP-MS) and compared with attenuated total reflectance-FTIR. Using ES-DMA-ICP-MS, AuNP conjugates were size-classified based on their electrical mobility, while Pt^II loading was simultaneously quantified by determination of Pt mass. Colloidal stability was quantitatively evaluated in biologically relevant media. Finally, the pH-dependent Pt^II release performance was evaluated. We observed 9% and 16% Pt^II release at drug loadings of 0.5 and 1.9 Pt^II/nm², respectively. The relative molar mass of PEG had no significant influence on Pt^II uptake or release performance, while PEGylation substantially improved the colloidal stability of the conjugate. Notably, the Pt^II release over 10 days (examined at 0.5 Pt^II/nm² drug loading) remained constant for non-PEGylated, 1K-PEGylated, and 5K-PEGylated conjugates.

Surface proteomics on nanoparticles: a step to simplify the rapid prototyping of nanoparticles

Engineered nanoparticles for biomedical applications require increasing effectiveness in targeting specific cells while preserving non-target cells' safety. We developed a surface proteomics method for a rapid and systematic analysis of the interphase between the nanoparticle protein corona and the targeted cells that could implement the rapid prototyping of nanomedicines. Native nanoparticles entering in a protein-rich liquid medium quickly form a macromolecular structure called protein corona. This protein structure defines the physical interaction between nanoparticles and target cells. The surface proteins compose the first line of interaction between this macromolecular structure and the cell surface of a target cell. We demonstrated that SUSTU (SUrface proteomics, Safety, Targeting, Uptake) provides a qualitative and quantitative analysis from the protein corona surface. With SUSTU, the spatial dynamics of the protein corona surface can be studied. Data from SUSTU would ascertain the nanoparticle functionalized groups exposed at a destiny that could circumvent preliminary in vitro experiments. Therefore, this method could implement in the analysis of nanoparticle targeting and uptake capability and could be integrated into a rapid prototyping strategy which is a major challenge in nanomaterials science. Data are available via ProteomeXchange with the identifier PXD004636.

Noble metal-titania hybrid nanoparticle clusters and the interaction to proteins for photo-catalysis in aqueous environments

We report a systematic study of the controlled synthesis of new hybrid spherical TiO₂ nanoparticle cluster (TiO₂-NPC) homogeneously decorated with noble metal nanoparticles (NPs) by gas-phase evaporation-induced self-assembly. Silver NP (AgNP) was used as the representative noble metal NP. The degradation of methyl blue (MB) in the aqueous solution was chosen as the representative system for the study of photocatalysis, which were tested and evaluated with respect to irradiation conditions and the presence of bovine serum albumin (BSA). The results show that particle size and chemical composition of the hybrid nanostructure were tunable by choosing the suitable concentration of precursors. The photocatalytic activity of AgNP-decorated TiO₂-NPC was strongly affected by the light irradiation and the ligand-nanoparticle interfacial interaction. The presence of BSA influenced molecular conjugation to the surface of the hybrid nanostructure. Under conditions of simultaneous competitive adsorption of MB and BSA, the combination of AgNPs improved the photocatalytic activity of the TiO₂-NPC-based catalysts. Our work describes a prototype methodology to fabricate TiO₂-NPC homogeneously decorated with noble metal NPs with well-controlled material properties. The mechanistic understanding developed in this study can be useful for the future optimization of material properties of hybrid nanostructures versus interfacial interactions with the surrounding molecules.

Nanomaterial size distribution analysis via liquid nebulization coupled with ion mobility spectrometry (LN-IMS)

Ion mobility spectrometry is used for nanomaterial size distribution measurement without the need of electrospray based aerosolization.

Protein-silver nanoparticle interactions to colloidal stability in acidic environments

We report a kinetic study of Ag nanoparticles (AgNPs) under acidic environments (i.e., pH 2.3 to pH ≈7) and systematically investigate the impact of protein interactions [i.e., bovine serum albumin (BSA) as representative] to the colloidal stability of AgNPs. Electrospray-differential mobility analysis (ES-DMA) was used to characterize the particle size distributions and the number concentrations of AgNPs. Transmission electron microscopy was employed orthogonally to provide visualization of AgNPs. For unconjugated AgNPs, the extent of aggregation, or the average particle size, was shown to be increased significantly with an increase of acidity, where a partial coalescence was found between the primary particles of unconjugated AgNP clusters. Aggregation rate constant, kD, was also shown to be proportional to acidity, following a correlation of log(kD) = -1.627(pH)-9.3715. Using ES-DMA, we observe BSA had a strong binding affinity (equilibrium binding constant, ≈ 1.1 × 10(6) L/mol) to the surface of AgNPs, with an estimated maximum molecular surface density of ≈0.012 nm(-2). BSA-functionalized AgNPs exhibited highly-improved colloidal stability compared to the unconjugated AgNPs under acidic environments, where both the acid-induced interfacial dissolution and the particle aggregation became negligible. Results confirm a complex mechanism of colloidal stability of AgNPs: the aggregation process was shown to be dominant, and the formation of BSA corona on AgNPs suppressed both particle aggregation and interfacial dissolution of AgNP samples under acidic environments.

Electrospray differential mobility analysis for nanoscale medicinal and pharmaceutical applications

Nanoscale characterization tools hold the potential to overcome long-standing medicinal and pharmaceutical challenges. For example, electrospray differential mobility analysis (ES-DMA) is an emerging tool that rapidly provides label-free multimodal size distributions for proteins and particles from ~1 nm to <500 nm with subnanometer precision. Here we critically review the contributions of this tool to medicine, pharmaceutical practice, and pharmaceutical production. Our review critically evaluates, first, the use of ES-DMA for diagnostic strategies that detect and quantify lipoproteins, bacterial infections, viruses and amyloid fibrillation and then focuses on ES-DMA's contribution to treatment strategies that employ tailored virus-like particles as vaccines and decorated nanoparticle vectors for gene delivery. Our review also highlights ES-DMA's contribution to viral clearance and antibody aggregation and potential as a process analytical technology (PAT).

FROM THE CLINICAL EDITOR

Electrospray differential mobility analysis is an emerging nanotechnology-based tool with potential clinical utility in the detection and quantification of lipoproteins, glycoproteins, viruses, amyloids, bacterial infections. Its contribution to treatment strategies and pharmaceutical production is also discussed in this comprehensive review.