Hollow microsphere with mesoporous shell by Pickering emulsion polymerization as a potential colloidal collector for organic contaminants in water

Surface morphology regulation of colloidal Nanoparticles: A convenient Kinetically-Controlled seeded growth strategy

HYPOTHESIS

Except for chemical composition, surface morphology may endue colloidal nanoparticles with special interfacial behaviors, which is highly desired in certain scenarios, for example, ultra-stable Pickering emulsion for pharmaceutical applications where only limited chemicals are allowed. Herein, silica colloidal nanoparticle was chosen as a demo to illustrate a kinetically-controlled seeded growth strategy for the surface morphology regulation of colloidal nanoparticles.

EXPERIMENTS

Surface chemical heterogeneity was primarily introduced to the silica seed nanoparticles by a seeded growth process in the presence of mixed silicate moieties with thermodynamical incompatibility. Then a further kinetically-controlled seeded growth step was performed to regulate the surface morphology of silica nanoparticles by promoting the selective condensation of tetraethoxysilane on the hydrophilic microdomains.

FINDINGS

Upon reducing the growing rate, tetraethoxysilane hydrolysates tend to condensate on silica microdomains, resulting in the formation of raspberry-like nanoparticles. The generality of the kinetically-controlled seeded growth strategy was validated by its success on differently-sized silica seeds modified with a range of silane coupling agents. This established strategy is facile and effective for massive production of raspberry-like silica colloidal nanoparticles with precisely-designed surface morphology and size, offering an ideal platform for the investigation on the exclusive contribution of morphology to the interfacial behaviors of nanoparticles.

Controlled Synthesis of Polymethyl Methacrylate Latex Particles Armored by Fe3O4 via Pickering Emulsion Polymerization and Its Emulsifying Properties

The fabrication of polymethyl methacrylate (PMMA) latexes armored with modified Fe₃O₄ (IO) nanoparticles by Pickering emulsion polymerization was described. Dynamic light scattering analyzed the IO/PMMA latex particle size. Thermogravimetric analysis evaluated the incorporation efficiency (IE) of IO nanoparticles and the surface coverage (Cov) of latex particles. Scanning electron microscopy confirmed the IO nanoparticles loaded on the latex surface. Both the original and dialyzed IO nanoparticles were used as stabilizers to discuss the influence of electrolytes in IO solution on the process of emulsion polymerization. In order to effectively control the IE, Cov, hydrophobic properties, and magnetization of latex particles, the kinds of monomers, pH, and solid content of dialyzed IO on the polymerization process were investigated. In addition, the conversion of monomers, the size, and the number of latex particles were learned deeply so as to reveal the key mechanism of the PMMA polymerization process in the absence of electrolytes. Moreover, IO/PMMA latex particles showed good magnetic properties and emulsifying ability. In view of these results, a simple and efficient method for preparing magnetic hybrid materials by Pickering emulsion polymerization was proposed.

The hollow core-shell ferric oxide entrapped chitosan microcapsules as phosphate binders for phosphorus removal in vitro

Patients in hyperphosphatemia are orally prescribed with phosphate binders to excrete the non-metabolic phosphorus. Aiming for the bio-compatibility and binding efficacy, the Fe-based phosphate binders of low toxicity have been explored and improved. Herein, the hollow core-shell microcapsules as Fe@CH (nano ferric oxide entrapped in the polymerized chitosan) were constructed via emulsion interface polymerization, to enhance the phosphate binding from -NH₂ group and iron complex, and limit iron leakage significantly. Via the double emulsion polymerization based on the primary Pickering emulsion stabilized by oleic acid-modified ferric oxide, Fe@CH performed as the rough polymerized-chitosan microcapsules entrapping well-distributed ferric oxide for the phosphate adsorption in vitro. At pH 3 and pH 5, Fe@CH bound phosphorus efficiently, with the capacity of 55 mg/g and 65 mg/g respectively, along with the excellent shell isolation from iron leakage and remarkable safety. Prospectively, the Fe@CH micro-sorbent is the proper candidate as the phosphate binder for hyperphosphatemia.

Unexpected phenomenon in a conventional system: synthesis of raspberry-like hollow periodic mesoporous organosilica with controlled structure in one continuous step

We put forward a facile method to fabricate raspberry-like hollow PMO with tunable morphology, derived from an interesting phenomenon in preparing conventional PMO.

Synthetic strategies for raspberry-like polymer composite particles

The strategies used for the preparation of raspberry-like polymer composite particles are summarized comprehensively.

Synthesis of Mesoporous/Macroporous Microparticles Using Three-Dimensional Assembly of Chitosan-Functionalized Halloysite Nanotubes and Their Performance in the Adsorptive Removal of Oil Droplets from Water

Halloysite nanotubes (HNTs) were assembled into mesoporous/macroporous microparticles (c-g-HNTs MPs) using Pickering template-assisted approach. To unravel the stabilization mechanism in Pickering emulsion form, several emulsions and microparticles were prepared at various conditions and visualized using confocal laser scanning microscopy. The prepared c-g-HNTs MPs were used to treat emulsified oil solutions resulting in a maximum removal efficiency of 94.47%. The kinetics data of oil adsorption onto c-g-HNTs MPs was best fitted by the pseudo-second-order kinetic model ( R² = 0.9983). The maximum monolayer adsorption capacity of oil onto c-g-HNTs MPs as predicted by the multilayer Brunauer-Emmett-Teller model was found to be 788 mg/g. Compared with pristine HNTs, c-g-HNTs MPs exhibited higher self-settleability rates in aqueous solutions as well as in emulsified oil solutions, demonstrating their candidacy for practical water treatment applications. The c-g-HNTs MPs were repeatedly used for five adsorption-desorption cycles with minimal losses noticed in their performance.

Regulating polymer adsorption on colloid by surface morphology

The study of polymer adsorption on colloidal particles has attracted intensive attention. In this work, we investigated polymer adsorption on substrate colloidal particles with two complementary morphologies, one of which has bulges (raspberry-like) on the surface and the other of which has holes instead (strawberry-like). Compared to the bulges, the holes on the colloidal particles were found to prevent polymer adsorption and this effect was dependent on the relative dimensions of the polymer coil and hole. This surface morphology effect was attributed mainly to the reduced polymer accessibility to the adsorption sites in holes when the hydrodynamic size of the polymer coil is larger than the hole, due to the size limiting effect. When the hydrodynamic size of the polymer coil is smaller than that of the holes, no difference in polymer adsorption was observed between raspberry-like and strawberry-like colloids. This study provides a strategy for regulating polymer adsorption on colloidal particles by adjusting the fine structures on the surface, which may be advantageous when limited chemical compositions are allowed. For example, protein adsorption on colloidal drugs may be found to be significantly reduced when colloids with surface holes are used.

Nanoparticle Assembly at Liquid-Liquid Interfaces: From the Nanoscale to Mesoscale

In the past few decades, novel syntheses of a wide range of nanoparticles (NPs) with well-defined chemical composition and structure have opened tremendous opportunities in areas ranging from optical and electronic devices to biomedical markers. Controlling the assembly of such well-defined NPs is important to effectively harness their unique properties. The assembly of NPs at liquid-liquid interfaces is becoming a central topic both in surface and colloid science. Hierarchical structures, including 2D films, 3D capsules, and structured liquids, have been generating significant interest and are showing promise for physical, chemical, and biological applications. Here, a brief overview of the development of the self-assembly of NPs at liquid-liquid interfaces is provided, from theory to experiment, from synthetic NPs to bio-nanoparticles, from water-oil to water-water, and from "liquid-like" to "solid-like" assemblies.

Nature-Inspired Hydrogels with Soft and Stiff Zones that Exhibit a 100-Fold Difference in Elastic Modulus

Many biological materials, such as the squid beak and the spinal disc, have a combination of stiff and soft parts with very different mechanical properties, for example, the elastic modulus (stiffness) of the stiffest part of the squid beak is about 100 times that of the softest part. Researchers have attempted to mimic such structures using hydrogels but have not succeeded in synthesizing bulk gels with such large variations in moduli. Here, we present a general approach that can be used to form hydrogels with two or more zones having appreciably different mechanical characters. For this purpose, we use a technique developed in our lab for creating hybrid hydrogels with distinct zones. For the soft zone of the gel, we form a polymer network using a conventional acrylic monomer [ N, N'-dimethylacrylamide (DMAA)] and with laponite (LAP) nanoparticles as the cross-linkers. For the stiff zone, we combine DMAA, LAP, and a methacrylated silica precursor ([3-(methacryloyloxy)-propyl]trimethoxy-silane). When this mixture is polymerized, nanoscale silica particles (∼300 nm in diameter) are formed, and these serve as additional cross-links between the polymer chains, making this network very stiff. The unique character of each zone is preserved in the hybrid gel, and different zones are covalently linked to each other, thereby ensuring robust interfaces. Rheological measurements show that the elastic modulus of the stiff zone can be more than 100 times that of the soft zone. This ratio of moduli is the highest reported to date in a single, continuous gel and is comparable to the ratio in the squid beak. We present different variations of our soft-stiff hybrid gels, including multizone cylinders and core-shell discs. Such soft-stiff gels could have utility in bioengineering, such as in interfacing stiff medical implants with soft tissues.

Responsive Emulsions Stabilized by Amphiphilic Supramolecular Graft Copolymers Formed in Situ at the Oil-Water Interface

Amphiphilic supramolecular graft copolymers which can stabilize oil-in-water (o/w) emulsions and enable responsive demulsification were demonstrated in this study. Linear poly[( N, N-dimethylacrylmide)- stat-(3-acrylamidophenylboronic acid)] (PDMA- stat-PAPBA) copolymers with phenylboronic acid (PBA) groups and linear polystyrene homopolymers with cis-diol terminals (PS(OH)₂) were synthesized by reversible addition-fragmentation chain transfer polymerization. By the homogenization of the biphasic mixtures of an alkaline water solution of PDMA- stat-PAPBA copolymer and a toluene solution of PS(OH)₂ homopolymer, stable o/w emulsions could be generated, although neither PDMA- stat-PAPBA nor PS(OH)₂ alone was able to stabilize the emulsion. It was verified that the dispersed oil droplets in the emulsions were stabilized by the amphiphilic PDMA- stat-PAPBA- g-PS supramolecular graft copolymers, which were formed in situ at the oil-water interface by the complexation between the lateral PBA groups of PDMA- stat-PAPBA and the diol terminals of PS(OH)₂ during homogenization. These emulsions showed pH- and glucose-responsive demulsification because of the reversible B-O bonds between the PDMA- stat-PAPBA backbones and the PS side chains. The effects of polymer concentrations on emulsion formation were also investigated. The current study provides an alternative method for the facile preparation of responsive polymeric emulsifiers, which potentially may be extended to other polymer pairs containing PBA and cis-diol groups.

Evaporation, Lifetime, and Robustness Studies of Liquid Marbles for Collision-Based Computing

Liquid marbles (LMs) have recently attracted interest for use as cargo carriers in digital microfluidics and have successfully been implemented as signal carriers in collision-based unconventional computing circuits. Both application domains require LMs to roll over substantial distances and to survive a certain number of collisions without degrading. To evaluate the lifetime of LMs being subjected to movement and impact stresses, we have selected four types of coating to investigate: polytetrafluoroethylene (PTFE), ultrahigh density polyethylene (PE), Ni, and a mixture of Ni with PE (Ni-PE). Hierarchies of robustness have been constructed which showed that pure PE LMs survived the longest when stationary and in motion. Pure PTFE LMs were shown to be the least resilient to multiple impacts. The PTFE coating provided minimal protection against evaporative losses for small LM volumes (2 and 5 μL) however, larger LMs (10 μL) were shown to have good evaporative stabilities when stationary. Conversely, PE LMs showed a remarkable ability to withstand multiple impacts and were also stable when considering just passive evaporation. Hybrid Ni-PE LMs exhibited more resilience to multiple impacts compared to Ni LMs. Thus, when designing LM devices, it is paramount to determine impact pathways and select appropriate coating materials.

Hollow polymer particles: a review

Herein, the basic principles, such as the definitions, classifications, and properties, of hollow polymer particles (HPPs) are critically investigated.

Hollow Casein-Based Polymeric Nanospheres for Opaque Coatings

Casein-based hollow polymeric sphere were fabricated through emulsifier-free polymerization coupled with alkali swelling approach. Hollow structure and nanoscale size of casein-based polymeric spheres were verified by TEM, AFM, SEM, and UV-vis spectra. The as-obtained hollow spheres were proved exhibiting superior opaque characteristic. Through adjusting the structural parameters, for example, MAA usages and MAA content in seed to core, sphere film showed tunable visible-light transmittance and antiultraviolet property. The formation mechanism of casein-based hollow sphere has been discussed in depth. Worth mentioning, the resultant hollow polymeric sphere can easily form films itself at room temperature, which would open a new possibility of designing opaque coatings in several fields, such as leather, packaging, paper making, biomedical, and special indoor coating applications.

“House-of-cards” structures in silicone rubber composites for superb anti-collapsing performance at medium high temperature

We have introduced a novel polymer nanocomposite with superb anti-collapsing performance after polymer decomposition.

Theranostic hollow/mesoporous organosilica nanospheres enhance the therapeutic efficacy of anticancer drugs in metastatic hormone-resistant prostate cancer

Hollow mesoporous silica materials have received intensive interest in the field of cancer treatment owing to their large drug loading capacity, controlled release property and excellent biocompatibility.

Intermediate pickering emulsion formation as a means for synthesizing hollow mesoporous silica nanoparticles

Particle and surfactant-stabilized emulsion droplets formed in situ serve as templates for hollow silica nanoparticle growth.

Amphiphilic hollow porous shell encapsulated Au@Pd bimetal nanoparticles for aerobic oxidation of alcohols in water

Amphiphilic hollow porous shell encapsulated Au@Pd bimetal nanoparticles have been developed for application in aerobic oxidation of alcohols in water.

Sol–gel hydrothermal synthesis of microstructured CaO-based adsorbents for CO2capture

A novel 3D hierarchical CaCO₃hollow microspherical adsorbent composed of 1D spike-shaped nanorods was synthesized by a sol–gel hydrothermal method for CO₂capture.

Nickel Oxide Nanoparticle-Assembled Microspheres with a High Rate Capability for Lithium Storage

This paper presents the massive preparation of nickel oxide nanoparticle-assembled mesoporous microspheres using acid-treated carbon microspheres as sacrificial templates. The microstructure and morphology of the hollow NiO microspheres are characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and N2 adsorption–desorption methods. Scanning electron microscopy and transmission electron microscopy images reveal that these hollow spheres are assembled by NiO particles with sizes of ~20 nm. The nickel oxide nanoparticle-assembled mesoporous microspheres feature high surface area and good electronic conductivity, leading to high capacity and excellent cycling performance as anode materials for lithium-ion batteries.