Control of morphology and corona composition in aggregates of mixtures of PS-b-PAA and PS-b-P4VP diblock copolymers: effects of solvent, water content, and mixture composition

Preparation of Non-Spherical Janus Particles via an Orthogonal Dissolution Approach

Post-synthesis modifications are valuable tools to alter functionalities and induce morphology changes in colloidal particles. Non-spherical polymer particles with Janus characteristics are prepared by combining seeded growth polymerization and selective dissolution. First, spherical polystyrene (PS) particles have been swollen with methyl methacrylate (MMA) with an activated swelling method. This is followed by polymerization that led to particles with two well-separated faces: one made of PS and the second of polymethyl methacrylate (PMMA). Subsequently, non-spherical particles are obtained by exposing the Janus colloids to various solvents. Using the two polymers' orthogonal solubility, solvents are identified to selectively dissolve only one face, leading to hemispherical PS or PMMA particles. It is further investigated how changing the composition of the PMMA face - by either co-polymerization with glycidyl methacrylate or by adding a cross-linker - affects the particles' morphology. The poly-methacrylate face can gain total or partial resistance towards the solvents, resulting in intriguing shapes, such as mushroom-like and Janus dimpled particles. The dissolution mechanisms are investigated via optical microscopy, where total or partial dissolutions can be directly observed. Lastly, prematurely quenching the dissolution of the particle's lobes with water can be used to control the Janus mushroom-like particle aspect ratio.

From Unimolecular Template to Silver Nanocrystal Clusters: An Effective Strategy to Balance Antibacterial Activity and Cytotoxicity

Silver nanomaterials have attracted a great deal of interest due to their broad-spectrum antimicrobial activity. However, it is still challenging to balance the high antibacterial efficiency with low damage to biological cells of silver nanostructures, especially when the diameter decreases to less than 10 nm. Here, we developed a new type of Ag nanohybrid material via a unimolecular micelle template method, which presents amazing antibacterial activities and almost noncytotoxicity. First, water-soluble multiarm star-shaped brushlike copolymer α-CD-g-[(PEO₄₀-g-PAA₅₀)-b-PEO₅]₁₈ was precisely synthesized and its micelle behavior in different solvents was revealed. Then, nanocrystal clusters assembled by Ag grains (Ag@Template NCs) were prepared through an in situ redox route using the unimolecular micelle of α-CD-g-[(PEO₄₀-g-PAA₅₀)-b-PEO₅]₁₈ as the soft template, AgNO₃ as a precursor, and tetrabutylammonium borohydride (TBAB) as the reducing agent. The overall size of the achieved Ag@Template NCs is controlled by the template structure at around 40 nm (D_h in DMF), and the size of the Ag grain can be easily regulated from ∼1 to ∼5 nm by adjusting the feeding ratio of AgNO₃/acrylic acid (AA) units in the template from 1:10 to 1:1. Benefitting from the structural design of the template, all Ag@Template NCs prepared here exhibit excellent dispersibility and chemical stability in different aqueous environments (neutral, pH = 5.5, and 0.9% NaCl physiological saline solution), which play a crucial role in the long-term storage and potential application in a complex physiological environment. The antibacterial and cytotoxicity tests indicate that Ag@Template NCs display much better performance than Ag nanoparticles (Ag NPs), which have a comparable overall size of ∼25 nm. The inhibitory capability of Ag@Template NCs to bacteria strongly depends on the grain size. Specifically, the Ag@Template-1 NC assembled by the smallest grains (1.6 ± 0.3 nm) presents the best antibacterial activity. For E. coli (-), the MIC value is as low as 5 μg/mL (0.36 μg/mL of Ag), while for S. aureus (+), the value is around 10 μg/mL (0.72 μg/mL of Ag). The survival rate of L02 cells and lactate dehydrogenase assay together illustrate the low cytotoxicity possessed by the prepared Ag@Template NCs. Therefore, the proposed Ag@Template NC structure successfully resolves the high reactivity, instability, and fast oxidation issues of the ultrasmall Ag nanoparticles, and integrates high antibacterial efficiency and nontoxicity to biological cells into one platform, which implies its broad potential application in biomedicine.

Legumain-induced intracerebrally crosslinked vesicles for suppressing efflux transport of Alzheimer's disease multi-drug nanosystem

Brain barrier is both a protective permeability hurdle and a limitation site where therapeutic agents are excluded to enter the target region. Designing drug vehicle to overcome this notorious barrier bottle is challenging. Herein, we construct a stimuli-responsive self-assembled nanovesicle that delivers water-soluble drugs to prevent the efflux transport of brain barriers by responding to the endogenously occurring signals in Alzheimer's disease (AD) brain microenvironment. Once stimuli-responsive vesicles are accumulated in intracerebrally, the intrinsically occurring legumain endopeptidase cleaves the Ac-Ala-Ala-Asn-Cys-Asp (AK) short peptide on the drug vesicles to expose the 1,2 thiol amino group to cyclize with the cyano groups on 2-cyano-6-aminobenzothiazole (CABT) of the chaperone vesicles, thus triggering the formation of cross-linked micrometre-scale vesicles. Such a structural alteration completely prevents further brain barriers efflux. The superior neuroprotective capacity of cross-linked vesicles is validated in senescence accelerated mouse prone 8 (SAMP8). This smart multi-drug delivery vesicle is promising to serve as a powerful system for AD treatment and can be adapted for the therapy of other central nervous system (CNS) disorders.

Synthesis and Characterization of Bio-Active GFP-P4VP Core–Shell Nanoparticles

Bioactive core–shell nanoparticles (CSNPs) offer the unique ability for protein/enzyme functionality in non-native environments. For many decades, researchers have sought to develop synthetic materials which mimic the efficiency and catalytic power of bioactive macromolecules such as enzymes and proteins. This research studies a self-assembly method in which functionalized, polymer-core/protein-shell nanoparticles are prepared in mild conditions. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) techniques were utilized to analyze the size and distribution of the CSNPs. The methods outlined in this research demonstrate a mild, green chemistry synthesis route for CSNPs which are highly tunable and allow for enzyme/protein functionality in non-native conditions.

Hierarchical self-assembly of a PS-b-P4VP/PS-b-PNIPAM mixture into multicompartment micelles and their response to two-dimensional confinement

Finely tuned synergistic effects among different blocks could realize intriguing hierarchical self-assembly of block copolymers and such hierarchical self-assembly could be manipulated by cylindrical confinement to tune the structures of assemblies.

Controllable Multigeometry Nanoparticles via Cooperative Assembly of Amphiphilic Diblock Copolymer Blends with Asymmetric Architectures

Multigeometry nanoparticles with high complexity in composition and structure have attracted significant attention for enhanced functionality. We assess a simple but versatile strategy to construct hybrid nanoparticles with subdivided geometries through the cooperative assembly of diblock copolymer blends with asymmetric architectures. We report the formation of multicompartmental, vesicular, cylindrical, and spherical structures from pure AB systems. Then, we explore the assemblies of binary AB/AC blends, where the two incompatible, hydrophobic diblock copolymers subdivide into self-assembled local geometries, and the complexity of the obtained morphologies increases. We expand the strategy to ternary AB/AC/AD systems by tuning the effect of phase separation of different hydrophobic domains on the surface or internal region of the nanoparticle. The kinetic control of the coassembly in the initial stage is crucial for controlling the final morphology. The interactions of copolymers with different block lengths and chemistries enable the stabilization of interfaces, rims and ends of subdomains in the hybrid multigeometry nanoparticles. With further exploration of size and shape, the dependence of local geometry on the volume fraction is discussed. We show an efficient approach for controllable multigeometry nanoparticle construction that will be useful for multifunctional and hierarchical nanomaterials.

Morphology Under Control: Engineering Biodegradable Stomatocytes

Biodegradable nanoarchitectures, with well-defined morphological features, are of great importance for nanomedical research; however, understanding (and thereby engineering) their formation is a substantial challenge. Herein, we uncover the supramolecular potential of PEG-PDLLA copolymers by exploring the physicochemical determinants that result in the transformation of spherical polymersomes into stomatocytes. To this end, we have engineered blended polymersomes (comprising copolymers with varying lengths of PEG), which undergo solvent-dependent reorganization inducing negative spontaneous membrane curvature. Under conditions of anisotropic solvent composition across the PDLLA membrane, facilitated by the dialysis methodology, we demonstrate osmotically induced stomatocyte formation as a consequence of changes in PEG solvation, inducing negative spontaneous membrane curvature. Controlled formation of unprecedented, biodegradable stomatocytes represents the unification of supramolecular engineering with the theoretical understanding of shape transformation phenomena.

Controllable multicompartment morphologies from cooperative self-assembly of copolymer-copolymer blends

Multicompartment nanostructures, such as microcapsules with clearly separated shell and core, are not easily accessible by conventional block copolymer self-assembly. We assess a versatile computational strategy through cooperative assembly of diblock copolymer blends to generate spherical and cylindrical compartmentalized micelles with intricate structures and morphologies. The co-assembly strategy combines the advantages of polymer blending and incompatibility-induced phase separation. Following this strategy, various nanoassemblies of pure AB, binary AB/AC and ternary AB/AC/AD systems such as compartmentalized micelles with sponge-like, Janus, capsule-like and onion-like morphologies can be obtained. The formation and structural adjustment of microcapsule micelles, in which the shell or core can be occupied by either pure or mixed diblock copolymers, were explored. The mechanism involving the separation of shell and core copolymers is attributed to the stretching force differences of copolymers which drive the arrangement of different copolymers in a pathway to minimize the total interfacial energy. Moreover, by adjusting block interactions, an efficient approach is exhibited for regulating the shell or core composition and morphology in microcapsule micelles, such as the transition from the "pure shell/mixed core" morphology to the "mixed shell/pure core" morphology in the AB/AC/AD micelle. This mesoscale simulation study identifies the key factors governing co-assembly of diblock copolymer blends and provides bottom-up insights towards the design and optimization of new multicompartment micelles.

Morphology Control of Ni(II)-NTA-End-Functionalized Block Copolymer and Bio-Conjugation through Metal-Ligand Complex

This study demonstrates the synthesis of an amphiphilic block copolymer, Ni²⁺-nitrilotiracetic acid-end-functionalized-poly(poly(ethylene glycol)methyl ether methacrylate)-block-polystyrene (NTA-p(PEGMA-b-St)), morphology control via their self-assembly behavior and reversible bioconjugation of hexahistidine-tagged green fluorescent protein (His₆-GFP) onto the surfaces of polymeric vesicles through nitrilotriacetic acid (NTA)-Ni²⁺-His interaction. First, the t-boc-protected-NTA-p(PEGMA-b-St) was synthesized by atom transfer radical polymerization. After the removal of the t-boc protecting group, the NTA group of the polymer was complexed with Ni²⁺. To induce self-assembly, water was added as a selective solvent to the solution of the copolymer in tetrahydrofuran (THF). Varying the water content of the solution resulted in various morphologies including spheres, lamellas and vesicles. Finally, polymeric vesicles decorated with green fluorescent protein (GFP) on their surfaces were prepared by the addition of His₆-GFP into the vesicles solution. Reversibility of the binding between vesicles and His₆-GFP was confirmed with a fluorescent microscope.

Structural transformation of vesicles formed by a polystyrene-b-poly(acrylic acid)/polystyrene-b-poly(4-vinyl pyridine) mixture: from symmetric to asymmetric membranes

Asymmetric vesicles with different inner and outer corona compositions are applicable in microreactors, drug delivery, and biomimics because of their unique functions in membrane permeability and protein localization. In this study, we develop a novel approach to construct asymmetric vesicles and demonstrate the first structural transformation of polymeric vesicles from symmetric to asymmetric membranes. Experimental results and Monte Carlo simulation results clearly reveal that increased intercorona repulsion and enhanced hydrophobic chain mobility are essential to realize this transformation. Moreover, similar transformation processes are observed where either HCl or NaOH is added to change the intercorona interaction. This finding indicates that the observed structural transformation is dominated by physical interactions rather than chemical environment. The constructed asymmetric vesicles can be selectively decorated with gold nanoparticles on the outer corona. This study introduces a novel approach to prepare asymmetric vesicles and provides insights into the mechanism underlying the structural transformation of polymeric vesicles from symmetric to asymmetric membranes.

In situ synthesis of a self-assembled AB/B blend of poly(ethylene glycol)-b-polystyrene/polystyrene by dispersion RAFT polymerization

A diblock-copolymer/homopolymer self-assembled blend was synthesized through dispersion RAFT polymerization, and its morphology changed with a decreasing ratio of diblock-copolymer/homopolymer.

Thermodynamics of the multi-stage self-assembly of pH-sensitive gradient copolymers in aqueous solutions

The self-assembly thermodynamics of pH-sensitive di-block and tri-block gradient copolymers of acrylic acid and styrene was studied for the first time using isothermal titration calorimetry (ITC) and dynamic light scattering (DLS) performed at varying pH. We were able to monitor each step of micellization as a function of decreasing pH. The growth of micelles is a multi-stage process that is pH dependent with several exothermic and endothermic components. The first step of protonation of the acrylic acid monomer units was accompanied mainly by conformational changes and the beginning of self-assembly. In the second stage of self-assembly, the micelles become larger and the number of micelles becomes smaller. While solution acidity increases, the isothermal calorimetry data show a broad deep minimum corresponding to an exothermic process attributed to an increase in the size of hydrophobic domains and an increase in the structure's hydrophobicity. The minor change in heat capacity (ΔCp) confirms the structural changes during this exothermic process. The exothermic process terminates deionization of acrylic acid. The pH-dependence of the ζ-potential of the block gradient copolymer micelles exhibits a plateau in the regime corresponding to the pH-controlled variation of the micellar dimensions. The onset of micelle formation and the solubility of the gradient copolymers were found to be dependent on the length of the gradient block.

Controlling the morphology of glyco-nanoparticles in water using block copolymer mixtures: the effect on cellular uptake

Poly[(2-(α-d-mannosyloxy)ethyl acrylate)-block-(n-butyl acrylate)], P(ManA-b-BA), and poly[poly(ethylene glycol) methyl ether acrylate]-block-(n-butyl acrylate)], P(OEGMEA-b-BA) diblock copolymers were mixed at various ratios to generate self-assembled structures of different morphologies.