Spontaneous oil-in-water emulsification induced by charge-stabilized dispersions of various inorganic colloids

Photothermal-driven micro/nanomotors: From structural design to potential applications

Micro/nanomotors (MNMs) that accomplish autonomous movement by transforming external energy into mechanical work are attractive cargo delivery vehicles. Among various propulsion mechanisms of MNMs, photothermal propulsion has gained considerable attention because of their unique advantages, such as remote, flexible, accurate, biocompatible, short response time, etc. Moreover, besides as a propulsion source, the light has been extensively investigated as an excitation source in bioimaging, photothermal therapy (PTT), photodynamic therapy (PDT) and so on. Furthermore, the geometric topology and morphology of MNMs have a tremendous impact on improving their performance in motion behavior under NIR light propulsion, environmental suitability and functional versatility. Hence, this review article provides a comprehensive overview of structural design principles and construction strategies of photothermal-driven MNMs, and their emerging nanobiomedical applications. Finally, we further provide an outlook towards prospects and challenges during the development of photothermal-driven MNMs in the future. STATEMENT OF SIGNIFICANCE: Photothermal-driven micro/nanomotors (MNMs) that are regarded as functional cargo delivery tools have gained considerable attention because of unique advantages in propulsion mechanisms, such as remote, flexible, accurate and fully biocompatible light manipulation and extremely short light response time. The geometric topology and morphology of MNMs have a tremendous impact on improving their performance in motion behavior under NIR light propulsion, environmental suitability and functional versatility of MNMs. There are no reports about the review focusing on photothermal-driven MNMs up to now. Herein, we systematically review the latest progress of photothermal-driven MNMs including design principle, fabrication strategy of various MNMs with different structures and nanobiomedical applications. Moreover, the summary and outlook on the development prospects and challenges of photothermal-driven MNMs are proposed, hoping to provide new ideas for the future design of photothermal-driven MNMs with efficient propulsion, multiple functions and high biocompatibility.

Synthetic strategies for nonporous organosilica nanoparticles from organosilanes

Organosilica nanoparticles refer to silica nanoparticles containing carbon along with organic or functional groups and can be divided into mesoporous organosilica nanoparticles and nonporous organosilica nanoparticles. During the past few decades, considerable efforts have been devoted to the development of organosilica nanoparticles directly from organosilanes. However, most of the reports have focused on mesoporous organosilica nanoparticles, while relatively few are concerned with nonporous organosilica nanoparticles. The synthesis of nonporous organosilica nanoparticles typically involves (i) self-condensation of an organosilane as the single source, (ii) co-condensation of two or more types of organosilanes, (iii) co-condensation of tetraalkoxysilane and an organosilane, and (iv) spontaneous emulsification and the subsequent radical polymerization of 3-(trimethoxysilyl)propyl methacrylate (TPM). This article aims to provide a review on the synthetic strategies of this important type of colloidal particle, followed by a brief discussion on their applications and future perspectives.

Droplet Formation and Growth Mechanisms in Reaction-Induced Spontaneous Emulsification of 3-(Trimethoxysilyl) Propyl Methacrylate

Spontaneous emulsification of 3-(trimethoxysilyl) propyl methacrylate (TPM) can produce complex and active colloids, nanoparticles, or monodisperse Pickering emulsions. Despite the applicability of TPM in particle synthesis, the nucleation and growth mechanisms of TPM emulsions are still poorly understood. We investigate droplet formation and growth of TPM in aqueous solutions under quiescent conditions. Our results show that in the absence of stirring the mechanisms of diffusion and stranding likely drive the spontaneous emulsification of TPM through the formation of co-soluble species during hydrolysis. In addition, turbidity and dynamic light scattering experiments show that the pH modulates the growth mechanism. At pH 10.1, the droplets grow via Ostwald ripening, while at pH 11.5, the droplets grow via monomer addition. Adding surfactants [Tween, sodium dodecyl sulfate (SDS), or cetyltrimethylammonium bromide] leads to <100 nm droplets that are kinetically stable. The growth of Tween droplets occurs through addition of TPM species while the number density of droplets is kept constant. In addition, in the presence of the ionic surfactant SDS, electrostatic repulsion between the solubilized TPM species and SDS leads to a significant increase in the number density of droplets as well as additional nucleation events. Finally, imaging of the solubilization of TPM in capillaries shows that in the absence of a surfactant, TPM hydrolysis is likely the rate-limiting step for emulsification, whereas the presence of silica particles in the aqueous phase likely acts as a catalyst of TPM hydrolysis. Our experiments highlight the importance of diffusion and solubilization of TPM species in the aqueous phase in the nucleation and growth of droplets.

Temperature-Responsive Pyraclostrobin-Loaded Octadecane Submicrocapsules with Lowered Toxicity

Pyraclostrobin (Pyr) is one of the most effective fungicides. However, it can degrade via photolysis in water, it is toxic to aquatic life and if inhaled, it has a low solubility in water, that leads to difficulties when applying to plants by spraying. Additionally, the necessity of repeated (weekly) sprays of fungicides when the pathogen growth risk is the highest, such as at the temperature range of 24 to 36 °C and increased humidity of about 95%, leads to loss of efficiency of the fungicide and overdose of chemicals. In the present study, pyraclostrobin was microencapsulated to solve the abovementioned issues. As a core of capsules octadecane (OD) with a melting point of 28 °C was used, thus, the release of pyraclostrobin was controlled via temperature change. Pyraclostrobin-loaded submicrocapsules (PyrSMCs) were characterized using SEM, DLS, TGA/DSC, HPLC, FTIR methods; stimuli-responsivity was tested employing in vitro tests with pathogenic culture (Fungal strain of Pyrenophora teres - CPPF-453) grown in Petri dishes. Toxicity of PyrSMCs to Artemia salina was studied as well. Size of capsules was 200–600 nm along with the presence of bigger capsules with a diameter of 1–4 µm. PyrSMCs showed excellent antifungal effects above the melting point of octadecane. PyrSMCs demonstrated 29 times less toxicity than pyraclostrobin of technical grade. Overall, results show the potential of such capsules to be applied in the agricultural industry for precise agriculture strategies.

Selective colloidal bonds via polymer-mediated interactions

Regioselectivity in colloidal self-assembly typically requires specific chemical interactions to guide particle binding. In this paper, we describe a new method to form selective colloidal bonds that relies solely on polymer adsorption. Mixtures of polymer-coated and bare particles are initially stable due to long-ranged electrostatic repulsion. When their charge is screened, the two species can approach each other close enough for polymer bridges to form, binding the particles together. By utilizing colloidal dumbbells, where each lobe is coated with polymer brushes of differing lengths, we demonstrate that the Debye screening length serves as a selective switch for the assembly of bare tracer particles onto the two lobes. We model the interaction using numerical self-consistent field lattice computations and show how regioselectivity arises from just a few nanometers difference in polymer brush length.

Surfactant-Stabilized Spontaneous 3-(Trimethoxysilyl) Propyl Methacrylate Nanoemulsions

Nanoemulsions are a versatile means to create a variety of consumer products and complex materials. Producing nanoemulsions with a high volume fraction of the dispersed phase is generally limited to mechanically intensive processes, such as high-pressure homogenization, and often results in polydisperse droplet size distributions. Low-energy methods, such as spontaneous emulsification, can produce monodispersed droplets, but the volume fraction of the dispersed phase is usually much lower. Here, we report on the spontaneous emulsification of 3-(trimethoxysilyl) propyl methacrylate (TPM) into an alkaline aqueous phase (pH > 10.0) that contains surfactants (Tween 20, sodium dodecyl sulfate (SDS), or cetyltrimethylammonium bromide (CTAB)). The nanoemulsions are monodisperse with droplet diameters that range between 15 and 500 nm. The small droplet size is due to the presence of surfactants that stabilize the droplets against coalescence. The spontaneous emulsion process can produce emulsions with a dispersed volume fraction of up to 10% in CTAB solutions and up to 30% using Tween 20 and SDS. After the emulsification process, the TPM droplets can be polymerized to produce nanoparticles. Using dynamic light scattering and scanning electron microscopy, we characterize the relationship between the surfactant concentration and the size of the droplets in the nanoemulsions. We find that the droplet diameter is primarily determined by the molar ratio of oil to surfactant. We also find that the pH in the aqueous phase also modulates the droplet diameter when using an ionic surfactant. This work expands the spontaneous emulsification of TPM in the absence of stabilizing particles to the nanoscale while producing one of the highest volume fractions of nanoemulsion droplets obtained via a low-energy mechanism.

Synthesis of Submicrocontainers with “Green” Biocide and Study of Their Antimicrobial Activity

The synthesis and properties of submicrocontainers with a shell of nanoparticles of silicon dioxide and a core of polymerized 3-(Trimethoxysilyl) propyl methacrylate loaded with 5-Dichloro-2-n-octyl-4-isothiazolin-3-one (DCOIT) are considered. The resulting containers were characterized by scanning electron microscopy SEM, laser correlation spectroscopy and thermogravimetric analysis. The obtained submicrocontainers show low polydispersity with a small increase in size in comparison with the initial droplet size of the Pickering emulsion. The Zeta potential of the final containers was sufficiently negative at pH7 to be stable. The maximum release of encapsulated biocide was observed over approximately 24–27 h with a lease of about 78% of the encapsulated biocide during 3.5 h. The effectiveness of the encapsulated biocide by the Pickering emulsion technique was studied by tests on the growth rate of a microfungi colony (Aspergillus niger, Aspergillus awamori) and the growth rate of the bacteria Bacillus cereus. The test shows that the submicrocontainers of DCOIT facilitate a growth inhibition of 70% against 52% for the free biocide after 5 days; this is due to the fact that free biocide loses its activity promptly, while the encapsulated biocide is released gradually, and thus retains its effectivity for a longer time.

l-Arginine-Catalyzed Synthesis of Nanometric Organosilica Particles through a Waterborne Sol-Gel Process and Their Porous Structure Analysis

We report an efficient and easy-to-implement waterborne sol-gel process for the synthesis of nanometric organosilica particles. In this process, tetraethyl orthosilicate (TEOS) and 3-(methacryloxy)propyl trimethoxy silane (γ-MPS), employed as silica sources, were heterogeneously delivered in an aqueous solution of l-arginine, a basic amino acid used as a catalyst, from a top organic layer. Co-condensation of TEOS with γ-MPS led to the formation of organosilica particles with diameters between 30 and 230 nm when increasing the γ-MPS content from 0 to 10.1 mol % in the silica source. Nitrogen sorption analyses confirmed the microporous nature of the obtained particles after calcination. The Brunauer-Emmett-Teller (BET) surface areas increased from 27 (before calcination) to 684 m² g^-1 (after calcination) for the organosilica particles containing 10.1 mol % of γ-MPS. Fourier transform infrared spectroscopy and ²⁹Si NMR were employed to analyze the chemical structure of the organosilica spheres and provide insight into the mechanism of particle formation. In the second part, hybrid organosilica particles with a core-shell morphology were synthesized through the combination of Pickering emulsion and the sol-gel process. γ-MPS emulsion droplets stabilized by tiny silica particles (formed in a separate step) were first generated and used as seeds to grow a silica shell on their surface through TEOS addition from the top organic layer. Transmission electron microscopy and pore size analyses of the resulting particles after calcination revealed a unique dual-porosity structure with a mesoporous inner core and a micro/mesoporous silica shell with ink-bottle-type pores.

Preparation of Colloidal Organosilica Spheres through Spontaneous Emulsification

Colloidal particles of controlled size are promising building blocks for the self-assembly of functional materials. Here, we systematically study a method to synthesize monodisperse, micrometer-sized spheres from 3-(trimethoxysilyl)propyl methacrylate (TPM) in a benchtop experiment. Their ease of preparation, smoothness, and physical properties provide distinct advantages over other widely employed materials such as silica, polystyrene, and poly(methyl methacrylate). We describe that the spontaneous emulsification of TPM droplets in water is caused by base-catalyzed hydrolysis, self-condensation, and the deprotonation of TPM. By studying the time-dependent size evolution, we find that the droplet size increases without any detectable secondary nucleation. Resulting TPM droplets are polymerized to form solid particles. The particle diameter can be controlled in the range of 0.4 to 2.8 μm by adjusting the volume fraction of added monomer and the pH of the solution. Droplets can be grown to diameters of up to 4 μm by adding TPM monomer after the initial emulsification. Additionally, we characterize various physical parameters of the TPM particles, and we describe methods to incorporate several fluorescent dyes.

Template-Free Synthesis of Hollow/Porous Organosilica-Fe3O4 Hybrid Nanocapsules toward Magnetic Resonance Imaging-Guided High-Intensity Focused Ultrasound Therapy

Entirely differing from the common templating-based multistep strategy for fabricating multifunctional hollow mesoporous silica nanoparticles (HMSN), a facile and template-free synthetic strategy has been established to construct a unique hollow/mesoporous organosilica nanocapsule (OSNC) concurrently encapsulating both isopentyl acetate (PeA) liquid and superparamagnetic iron oxides inside (denoted as PeA@OSNC). This novel material exhibits ultrasmall and uniform particle size (∼82 nm), high surface area (∼534 m²·g^-1), and excellent colloidal stability in aqueous solution. The oil-phase PeA with relatively low boiling point (142 °C) and high volatility not only plays a crucial role in formation of a large hollow cavity from the viewpoint of structural design but also enables the PeA@OSNC to act as an efficient enhancement agent in high-intensity focused ultrasound (HIFU) therapy. Moreover, the unique satellite-like distribution of Fe₃O₄ nanoparticles (NP) on the organosilica shell offered excellent magnetic resonance imaging (MRI) contrast capability of PeA@OSNC in vitro and in vivo. More importantly, such a novel theranostic agent has favorable biosafety, which is very promising for future clinical application in MRI-guided HIFU therapy.

Hollow microsphere with mesoporous shell by Pickering emulsion polymerization as a potential colloidal collector for organic contaminants in water

Submicrometer hollow microspheres with mesoporous shells were prepared by a simple one-pot strategy. Colloidal silica particles were used as a particle stabilizer to emulsify the oil phase, which was composed of a polymerizable silicon monomer (TPM) and an inert organic solvent (PEA). The low interfacial tension between colloidal silica particles and TPM helped to form a Pickering emulsion with small droplet sizes. After the polymerization of TPM, the more hydrophobic PEA formed a liquid core, leading to a hollow structure after its removal by evaporation. BET results indicated that the shell of a hollow particle was mesoporous with a specific surface area over 400 m(2)·g(-1). With PEA as the core and silica as the shell, each resultant hollow particle had a hydrophobic cavity and an amphiphilic surface, thus serving as a good colloidal collector for hydrophobic contaminants in water.

Pickering Interfacial Catalysts for solvent-free biomass transformation: physicochemical behavior of non-aqueous emulsions

A key challenge in biomass conversion is how to achieve valuable molecules with optimal reactivity in the presence of immiscible reactants. This issue is usually tackled using either organic solvents or surfactants to promote emulsification, making industrial processes expensive and not environmentally friendly. As an alternative, Pickering emulsions using solid particles with tailored designed surface properties can promote phase contact within intrinsically biphasic systems. Here we show that amphiphilic silica nanoparticles bearing a proper combination of alkyl and strong acidic surface groups can generate stable Pickering emulsions of the glycerol/dodecanol system in the temperature range of 35-130°C. We also show that such particles can perform as Pickering Interfacial Catalysts for the acid-catalyzed etherification of glycerol with dodecanol at 150°C. Our findings shed light on some key parameters governing emulsion stability and catalytic activity of Pickering interfacial catalytic systems. This understanding is critical to pave the way toward technological solutions for biomass upgrading able to promote eco-efficient reactions between immiscible organic reagents with neither use of solvents nor surfactants.

Facile preparation route toward speckled colloids via seeded polymerization

A facile method to prepare monodisperse speckled colloids has been developed via one-step seeded polymerization from noncross-linked latex particles. It was found that both cross-linking agents in the added monomer mixture and charged initiation species are essential for the formation of speckles on composite latex particle surface in seeded polymerization. The size and number density of speckles on the surface are tunable by adjusting the concentration of surfactant. A possible mechanism for the formation of such speckled colloids has been proposed based on a series of control experiments. Speckled colloidal particles were used as substrates for the adsorption of tobacco mosaic virus, and a much stronger adsorption was observed compared to smooth particles, implying a potential application of these speckled particles in virus collection and more.

Scenario for equilibrium solid-stabilized emulsions

We show theoretically that under certain conditions colloidal particles can give rise to spontaneous emulsification of oil/water systems. The capillary penalty to create a large interface is compensated by entropic contributions connected to ionic dissociation on the colloid surfaces. The colloids themselves are absorbed on the oil/water interface. The conditions for spontaneous emulsification are: (1) oil-water interfacial tension is low (a few mN/m or lower); (2) interfacial tension between colloids and oil is smaller than between colloids and water (in the absence of charge effects); (3) density of chargeable groups on the colloids is large (order 1 nm-2); (4) Debye length is comparable to colloid size.

Magnetic capsules and pickering emulsions stabilized by core-shell particles

Polystyrene-covered magnetic iron oxide particles (referred to as FeO(x)@PS) with different shell thickness are used as a novel type of nanostructured stabilizers in the preparation of magnetoresponsive Pickering emulsions. Microscopical methods (optical microscope and flow particle image analyzer) and magnetic characterization (vibrating sample magnetometry) were applied to investigate how the properties of the produced magnetic capsules are influenced by the solid concentration and the molar mass of the polymeric shell. We demonstrate the potential of these emulsions for possible applications, such as transporting and release systems.

Fluid-bicontinuous gels stabilized by interfacial colloids: low and high molecular weight fluids

Carefully tuned composite materials can have properties wholly unlike those of their separate constituents. We review the development of one example: colloid-stabilized emulsions with bicontinuous liquid domains. These non-equilibrium structures resemble the sponge mesophase of surfactants; however, in the colloid-stabilized case the interface separating the liquid domains is itself semi-solid. The arrangement of domains is created by arresting liquid-liquid phase separation via spinodal decomposition. Dispersed colloids exhibiting partial wettability become trapped on the newly created interface and jam together as the domains coarsen. Similar structures have been created in polymer blends stabilized using either interfacial nanoparticles or clay platelets. Here it has been possible to create the domain arrangement either by phase separation or by direct mixing of the melt. The low molecular weight liquid and polymer based structures have been developed independently and much can be learnt by comparing the two.