Stability of polydimethylsiloxane-magnetite nanoparticle dispersions against flocculation: interparticle interactions of polydisperse materials

Exploring the Impact of Surface Functionalization on the Reaction, Magnetophoretic, and Collective Transport Behavior of Nanoscale Zerovalent Iron

This study provides a systematic analysis of the transport and magnetophoretic behavior of nanoscale zerovalent iron (nZVI) particles, both bare and surface functionalized by poly(ethylene glycol) (PEG) and carboxymethyl cellulose (CMC), after undergoing a chemical reaction. Here, a simple and well-investigated chemical reaction of methyl orange (MO) degradation by nZVI was used as a model reaction system, and the sand column transport and low-gradient magnetophoretic profiles of the nanoparticles were measured before and after the reaction. The results were compared over time and analyzed in the context of extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory to understand the particle interactions involved. The colloidal stability of both bare and functionalized nZVI particles was enhanced after the reaction due to the consumption of metallic Fe content, resulting in a significant drop in their magnetic properties. As a result, they exhibited improved mobility across the sand column and a slower magnetophoretic collection rate compared to the unreacted particles. Here, the colloidal filtration theory (CFT) was employed to analyze the transport behavior of nZVI particles across the packed sand column. It has been observed that the surface properties of the reacted functionalized particles changed, possibly due to the entrapment of degraded products within the polymer adlayer. Moreover, quartz crystal microbalance with dissipation (QCM-D) measurements were performed to reveal the viscoelastic contribution of the adlayer formed by both bare and functionalized nZVI particles after the reaction on influencing their transport behavior across the sand column. Finally, we proposed the implementation of a high-gradient magnetic trap (HGMT) to reduce the transport distance of the colloidally stable CMC-nZVI, both before and after the reaction. This study sheds light on the behavioral changes of iron nanoparticles after the reaction and highlights environmental concerns regarding the presence of reacted nanoparticles.

Applications of Hybrid Polymers Generated from Living Anionic Ring Opening Polymerization

Increasingly precise control of polymer architectures generated by "Living" Anionic Ring-Opening Polymerization (Living AROP) is leading to a broad range of commercial advanced material applications, particularly in the area of siloxane macromers. While academic reports on such materials remain sparse, a significant portion of the global population interacts with them on a daily basis-in applications including medical devices, microelectronics, food packaging, synthetic leather, release coatings, and pigment dispersions. The primary driver of this increased utilization of siloxane macromers is their ability to incorporate the properties of silicones into organic structures in a balanced manner. Compared to organic polymers, the differentiating properties of silicones-low Tg, hydrophobicity, low surface energy, and high free molal space-logically lend themselves to applications in which low modulus, release, permeability to oxygen and moisture, and tactile interaction are desired. However, their mechanical, structural and processing properties have until recently precluded practical applications. This review presents applications of "Living" AROP derived polymers from the perspective of historical technology development. Applications in which products are produced on a commercial scale-defined as not only offered for sale, but sold on a recurrent basis-are emphasized. Hybrid polymers with intriguing nanoscale morphology and potential applications in photoresist, microcontact printing, biomimetic soft materials, and liquid crystals are also discussed. Previously unreported work by the authors is provided in the context of this review.

Emerging Biomedical Applications Based on the Response of Magnetic Nanoparticles to Time-Varying Magnetic Fields

Magnetic nanoparticles are of interest for biomedical applications because of their biocompatibility, tunable surface chemistry, and actuation using applied magnetic fields. Magnetic nanoparticles respond to time-varying magnetic fields via physical particle rotation or internal dipole reorientation, which can result in signal generation or conversion of magnetic energy to heat. This dynamic magnetization response enables their use as tracers in magnetic particle imaging (MPI), an emerging biomedical imaging modality in which signal is quantitative of tracer mass and there is no tissue background signal or signal attenuation. Conversion of magnetic energy to heat motivates use in nanoscale thermal cancer therapy, magnetic actuation of drug release, and rapid rewarming of cryopreserved organs. This review introduces basic concepts of magnetic nanoparticle response to time-varying magnetic fields and presents recent advances in the field, with an emphasis on MPI and conversion of magnetic energy to heat.

Creation of a PDMS Polymer Brush on SiO2-Based Nanoparticles by Surface-Initiated Ring-Opening Polymerization

The incorporation of nanoparticles into soft matrices opens a broad spectrum of novel property combinations. However, one of the major challenges for these systems remains the compatibilization of particles with the surrounding matrix by proper surface functionalization. For silicon-based systems or liquid crystalline phases, polydimethylsiloxane (PDMS) brushes at the surface of particles increase the stability against particle agglomeration in such systems. Here, we report a novel approach for the functionalization of particles with a polysiloxane brush by surface-initiated ring-opening polymerization of a cyclosiloxane. For this purpose, surface hydroxy groups of silica and silica-coated hematite particles are used as initiators in combination with phosphazene bases as catalysts. The ring-chain equilibrium of a model-based solution polymerization is investigated in detail to find the appropriate reaction parameters. The corresponding molar masses are determined and compared by ¹H-NMR and SEC measurements to confirm the underlying mechanism. In the resulting hybrid nanostructures, a covalently bound PDMS fraction is achieved up to 47 mass %.

pH-Responsive Mercaptoundecanoic Acid Functionalized Gold Nanoparticles and Applications in Catalysis

Mercaptoundecanoic acid (MUA) functionalized gold nanoparticles (AuNP-MUA) were synthesized and demonstrated to possess pH-triggered aggregation and re-dispersion, as well as the capability of phase transfer between aqueous and organic phases in response to changes in pH. The pH of aggregation for AuNP-MUA is consistent with the pK_a of MUA (pH ~4) in solution, while AuNP-MUA phase transition between aqueous and organic phases occurs at pH ~9. The ion pair formation between the amine group in octadecylamine (ODA), the carboxylate group in MUA, and the hydrophobic alkyl chain of ODA facilitates the phase transfer of AuNP-MUA into an organic medium. The AuNP-MUA were investigated as a reusable catalyst in the catalytic reduction of 4-nitrophenol by borohydride—a model reaction for AuNPs. It was determined that 100% MUA surface coverage completely inhibits the catalytic activity of AuNPs. Decreasing the surface coverage was shown to increase catalytic activity, but this decrease also leads to decreased colloidal stability, recoverability, and reusability in subsequent reactions. At 60% MUA surface coverage, colloidal stability and catalytic activity were achieved, but the surface coverage was insufficient to enable redispersion following pH-induced recovery. A balance between AuNP colloidal stability, recoverability, and catalytic activity with reusability was achieved at 90% MUA surface coverage. The AuNP-MUA catalyst can also be recovered at different pH ranges depending on the recovery method employed. At pH ~4, protonation of the MUA results in reduced surface charge and aggregation. At pH ~9, ODA will form an ion-pair with the MUA and induce phase transfer into an immiscible organic phase. Both the pH-triggered aggregation/re-dispersion and aqueous/organic phase transfer methods were employed for catalyst recovery and reuse in subsequent reactions. The ability to recover and reuse the AuNP-MUA catalyst by two different methods and different pH regimes is significant, based on the fact that nanoparticle-catalyzed reactions may occur under different pH conditions.

Stimulus-responsive Au@(MeO2MAx-co-OEGMAy) nanoparticles stabilized by non-DLVO interactions: implications of ionic strength and copolymer (x:y) fraction on aggregation kinetics

Functionalized nanoparticles can assist in stabilizing fluid-fluid interfaces; however, developing and applying the appropriate surface modification presents a challenge because successful application of these nanomaterials for biotechnological, food processing, and environmental applications requires their long-term stability in elevated ionic strength media. This work studies stimulus responsive polymeric materials based on random copolymers of di(ethylene glycol) methyl ether methacrylate (x = MeO2MA) and oligo(ethylene glycol) methyl ether methacrylate (y= OEGMA) which, when grafted to gold nanoparticles, show significant, tunable, colloidal stability. The nanoparticles Au@(MeO2MAx-co-OEGMAy) display tunable, reversible aggregation that is highly dependent on the (x:y) ratio and ionic strength. Effects of these parameters on the initial rate constant of aggregation (k11) are studied by time-resolved dynamic light scattering (TR-DLS) experiments. At the same nanoparticle concentration, a strong sensitivity to salt concentration is observed. Over less than 300 mM increase in NaCl concentration, we observed a two-order of magnitude increase in aggregation rate constants, 4.2 × 10(-20) < k11 < 1.8 × 10(-18) m(3)s(-1). Additionally, for the same gold nanoparticles, a higher fraction of OEGMA requires a higher salt concentration to induce aggregation. A linear relationship between the critical NaCl coagulation concentration (CCC) and the copolymer composition is observed. Analysis of the experimental data with an extended Derjaguin-Landau-Verwey-Overbeek (xDLVO) theory that includes hydration and osmotic forces is used to explain the stability of these systems. We find the hydration pressure, 2.4 < P(h,0) < 7.2 MPa, scales linearly both with the osmotic pressure and the OEGMA monomer concentration (5 < y < 20%). Specific knowledge of P(h,0)(y, C(NaCl)) enables design of both aggregation kinetics and stability as a function of the copolymer ratio and external stimuli.

Combination of magnetic field and surface functionalization for reaching synergistic effects in cellular labeling by magnetic core–shell nanospheres

The joint effect of surface functionalization and an external magnetic field on cellular labeling was studied.

Characterization of magnetic nanoparticle by dynamic light scattering

Here we provide a complete review on the use of dynamic light scattering (DLS) to study the size distribution and colloidal stability of magnetic nanoparticles (MNPs). The mathematical analysis involved in obtaining size information from the correlation function and the calculation of Z-average are introduced. Contributions from various variables, such as surface coating, size differences, and concentration of particles, are elaborated within the context of measurement data. Comparison with other sizing techniques, such as transmission electron microscopy and dark-field microscopy, revealed both the advantages and disadvantages of DLS in measuring the size of magnetic nanoparticles. The self-assembly process of MNP with anisotropic structure can also be monitored effectively by DLS.

Discrete nanoparticles induce loss of Legionella pneumophila biofilms from surfaces

Nanoparticles (NPs) have been shown to induce dispersal events in microbial biofilms but the mechanism of the dispersal is unknown. Biofilms contaminate many man-made aquatic systems such as cooling towers, spas and dental lines. Within these biofilms, Legionella pneumophila is a primary pathogen, leading to these environments serving as sources for disease outbreaks. Here we show a reduction in biofilm bio-volume upon treatment with citrate-coated 6-nm platinum NPs, polyethylene glycol (PEG)-coated 11-nm gold NPs, and PEG-coated 8-nm iron oxide NPs. Treatment with citrate-coated 8-nm silver NPs, however, did not reduce biomass. The synthesis of NPs that remain dispersed and resist irreversible aggregation in the exposure media appears to be a key factor in the ability of NPs to induce biofilm dispersal.

The effect of magnetically induced linear aggregates on proton transverse relaxation rates of aqueous suspensions of polymer coated magnetic nanoparticles

It has been recently reported that for some suspensions of magnetic nanoparticles the transverse proton relaxation rate, R(2), is dependent on the time that the sample is exposed to an applied magnetic field. This time dependence has been linked to the formation of linear aggregates or chains in an applied magnetic field via numerical modeling. It is widely known that chain formation occurs in more concentrated ferrofluids systems and that this has an affect on the ferrofluid properties. In this work we examine the relationships between colloidal stability, the formation of these linear structures, and changes observed in the proton transverse relaxation rate of aqueous suspensions of magnetic particles. A series of iron oxide nanoparticles with varying stabilizing ligand brush lengths were synthesized. These systems were characterized with dynamic light scattering, transmission electron microscopy, dark-field optical microscopy, and proton transverse relaxation rate measurements. The dark field optical microscopy and R(2) measurements were made in similar magnetic fields over the same time scale so as to correlate the reduction of the transverse relaxivity with the formation of linear aggregates. Our results indicate that varying the ligand length has a direct effect on the colloidal arrangement of the system in a magnetic field, producing differences in the rate and size of chain formation, and hence systematic changes in transverse relaxation rates over time. With increasing ligand brush length, attractive inter-particle interactions are reduced, which results in slower aggregate formation and shorter linear aggregate length. These results have implications for the stabilization, characterization and potentially the toxicity of magnetic nanoparticle systems used in biomedical applications.

Electrosteric stabilization and its role in cooperative magnetophoresis of colloidal magnetic nanoparticles

A detailed study on the conflicting role that colloid stability plays in magnetophoresis is presented. Magnetic iron oxide particles (MIOPs) that were sterically stabilized via surface modification with poly(sodium 4-styrene sulfonate) of different molecular weights (i.e., 70 and 1000 kDa) were employed as our model system. Both sedimentation kinetics and quartz crystal microbalance with dissipation (QCM-D) measurements suggested that PSS 70 kDa is a better stabilizer as compared to PSS 1000 kDa. This observation is mostly attributed to the bridging flocculation of PSS 1000 kDa decorated MIOPs originated from the extended polymeric conformation layer. Later, a lab-scale high gradient magnetic separation (HGMS) device was designed to study the magnetophoretic collection of MIOPs. Our experimental results revealed that the more colloidally stable the MIOP suspension is, the harder it is to be magnetically isolated by HGMS. At 50 mg/L, naked MIOPs without coating can be easily captured by HGMS at separation efficiency up to 96.9 ± 2.6%. However, the degree of separation dropped quite drastically to 83.1 ± 1.2% and 67.7 ± 4.6%, for MIOPs with PSS 1000k and PSS 70k coating, respectively. This observation clearly implies that polyelectrolyte coating that was usually employed to electrosterically stabilize a colloidal system in turn compromises the magnetic isolation efficiency. By artificially destroying the colloidal stability of the MIOPs with ionic strength increment, the ability for HGMS to recover the most stable suspension (i.e., PSS 70k-coated MIOPs) increased to >86% at 100 mM monovalent ion (Na(+)) or at 10 mM divalent ion (Ca(2+)). This observation has verified the conflicting role of colloidal stability in magnetophoretic separation.

Effect of poly(ethylene oxide)-silane graft molecular weight on the colloidal properties of iron oxide nanoparticles for biomedical applications

The size, charge, and stability of colloidal suspensions of magnetic nanoparticles with narrow size distribution and grafted with poly(ethylene glycol)-silane of different molecular weights were studied in water, biological buffers, and cell culture media. X-ray photoelectron spectroscopy provided information on the chemical nature of the nanoparticle surface, indicating the particle surfaces consisted of a mixture of amine groups and grafted polymer. The results indicate that the exposure of the amine groups on the surface decreased as the molecular weight of the polymer increased. The hydrodynamic diameters correlated with PEG graft molecular weight and were in agreement with a distributed density model for the thickness of a polymer shell end-grafted to a particle core. This indicates that the particles obtained consist of single iron oxide cores coated with a polymer brush. Particle surface charge and hydrodynamic diameter were measured as a function of pH, ionic strength, and in biological buffers and cell culture media. DLVO theory was used to analyze the particle stability considering electrostatic, magnetic, steric, and van der Waals interactions. Experimental results and colloidal stability theory indicated that stability changes from electrostatically mediated for a graft molecular weight of 750 g/mol to sterically mediated at molecular weights of 1000 g/mol and above. These results indicate that a graft molecular weight above 1000 g/mol is needed to produce particles that are stable in a wide range of pH and ionic strength, and in cell culture media.

Insight into serum protein interactions with functionalized magnetic nanoparticles in biological media

Surface modification with linear polymethacrylic acid (20 kDa), linear and branched polyethylenimine (25 kDa), and branched oligoethylenimine (800 Da) is commonly used to improve the function of magnetite nanoparticles (MNPs) in many biomedical applications. These polymers were shown herein to have different adsorption capacity and anticipated conformations on the surface of MNPs due to differences in their functional groups, architectures, and molecular weight. This in turn affects the interaction of MNPs surfaces with biological serum proteins (fetal bovine serum). MNPs coated with 25 kDa branched polyethylenimine were found to attract the highest amount of serum protein while MNPs coated with 20 kDa linear polymethacrylic acid adsorbed the least. The type and amount of protein adsorbed, and the surface conformation of the polymer was shown to affect the size stability of the MNPs in a model biological media (RPMI-1640). A moderate reduction in r(2) relaxivity was also observed for MNPs suspended in RPMI-1640 containing serum protein compared to the same particles suspended in water. However, the relaxivities following protein adsorption are still relatively high making the use of these polymer-coated MNPs as Magnetic Resonance Imaging (MRI) contrast agents feasible. This work shows that through judicious selection of functionalization polymers and elucidation of the factors governing the stabilization mechanism, the design of nanoparticles for applications in biologically relevant conditions can be improved.

Cationic gel-phase liposomes with "decorated" anionic SPIO nanoparticles: morphology, colloidal, and bilayer properties

The assembly and complexation of oppositely charged colloids are important phenomena in many natural and synthetic processes. Liposome-nanoparticle assemblies (LNAs) represent an interesting hybrid system that combines "soft" and "hard" colloidal materials. This work describes the formation and characterization of gel-phase LNAs formed by the binding of anionic superparamagnetic iron oxide (SPIO) nanoparticles to cationic dipalmitoylphosphatidylcholine (DPPC)/dipalmitoyltrimethylammonium propane (DPTAP) liposomes. Particles were examined with hydrodynamic diameters below (16 nm) and above (30 nm) the cutoff reported for supported lipid bilayer formation. LNA formation with 16 nm particles was entropically driven and particles bound individually to yield "decorated" structures. In this case, increasing nanoparticle concentration yielded colloidal LNA aggregates and eventual charge inversion. In contrast, LNA formation with 30 nm particles was enthalpically driven, and the nanoparticles aggregated at the bilayer interface. These aggregates led to significant LNA aggregation and large bilayer sheets due to liposome rupture despite minimal charge screening of the liposome surface. In this case SLBs were present, but these structures were not dominant. Differences in LNA structure were also revealed through the lipid phase transition behavior. This work infers size-dependent nanoparticle binding and LNA formation mechanisms that can be used to tailor colloidal and bilayer properties. Analogies are made to polyelectrolyte patch charge heterogeneities and DNA complexation with cationic liposomes.

Stabilization and functionalization of iron oxide nanoparticles for biomedical applications

Superparamagnetic iron oxide nanoparticles (NPs) are used in a rapidly expanding number of research and practical applications in the biomedical field, including magnetic cell labeling separation and tracking, for therapeutic purposes in hyperthermia and drug delivery, and for diagnostic purposes, e.g., as contrast agents for magnetic resonance imaging. These applications require good NP stability at physiological conditions, close control over NP size and controlled surface presentation of functionalities. This review is focused on different aspects of the stability of superparamagnetic iron oxide NPs, from its practical definition to its implementation by molecular design of the dispersant shell around the iron oxide core and further on to its influence on the magnetic properties of the superparamagnetic iron oxide NPs. Special attention is given to the selection of molecular anchors for the dispersant shell, because of their importance to ensure colloidal and functional stability of sterically stabilized superparamagnetic iron oxide NPs. We further detail how dispersants have been optimized to gain close control over iron oxide NP stability, size and functionalities by independently considering the influences of anchors and the attached sterically repulsive polymer brushes. A critical evaluation of different strategies to stabilize and functionalize core-shell superparamagnetic iron oxide NPs as well as a brief introduction to characterization methods to compare those strategies is given.

Microwave synthesis and inherent stabilization of metal nanoparticles in 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate

The synthesis of Co-NPs and Mn-NPs by microwave-induced decomposition of the metal carbonyls Co(2)(CO)(8) and Mn(2)(CO)(10), respectively, yields smaller and better separated particles in the functionalized IL 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate [EmimCO(2)H][BF(4)] (1.6 ± 0.3 nm and 4.3 ± 1.0 nm, respectively) than in the non-functionalized IL 1-n-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF(4)]. The particles are stable in the absence of capping ligands (surfactants) for more than six months although some variation in particle size could be observed by TEM.

Targeted magnetic hyperthermia

Many nanotechnologies, which enable unique approaches to treat cancer, have been developed based upon non-toxic organic and inorganic materials to improve current cancer treatments. The use of inorganic materials to form magnetic nanoparticles for hyperthermia therapy is of great interest for localized treatment of cancers without effecting adjacent healthy tissue. Extensive clinical trials have begun using magnetic hyperthermia in animal models. The purpose of this article is to address different factors that affect targeting, heating and biodistribution to safely control the therapeutic efficacy of targeted magnetic hyperthermia. This method involves accumulation of magnetic nanoparticles at a tumor site and then manipulating the magnetic properties of the nanoparticles to heat the targeted tissues.

Design of stable polyether-magnetite complexes in aqueous media: effects of the anchor group, molecular weight, and chain density

The colloidal stability of polymer-stabilized nanoparticles is critical for therapeutic use. However, phosphates in physiological media can induce polymer desorption and consequently flocculation. Colloidal characteristics of PEO-magnetite nanoparticles with different anchors for attaching PEO to magnetite were examined in PBS. The effects of the number of anchors, PEO molecular weight, and chain density were examined. It was observed that ammonium phosphonates anchored PEO to magnetite effectively in phosphate-containing solutions because of interactions between the phosphonates and magnetite. Additionally, a method to estimate the magnetite surface coverage was developed and was found to be critical to the prediction of colloidal stability. This is key to understanding how functionalized surfaces interact with their environment.

Multicomponent folate-targeted magnetoliposomes: design, characterization, and cellular uptake

Folate-targeted cationic magnetoliposomes (FTMLs) have been prepared with coencapsulated doxorubicin (DOX) and anionic superparamagnetic iron oxide (SPIO) nanoparticles (NPs) with 5 nm γ-Fe(2)O(3) cores and 16 nm hydrodynamic diameters. NP encapsulation (89%) was confirmed by cryogenic transmission electron microscopy (TEM), and the presence of the oppositely charged NPs did not cause liposome aggregation. The FTMLs had an average diameter of 174 ± 53 nm and existed as unilamellar and cup-shaped liposomes, which was attributed to dissimilar lipid packing parameters and the presence of PEG-lipids. A 3-fold increase in DOX release was achieved over 2 hours when the encapsulated SPIO NPs were heated by an alternating current electromagnetic field operating at radio frequencies (RF). Results with human cervical cancer cells (HeLa), which have been shown to exhibit high folate receptor (FR) expression, confirmed FTML surface binding and cellular uptake. In contrast, no uptake was observed for lower FR-expressing human breast carcinoma cells (ZR-75-1).

FROM THE CLINICAL EDITOR

This study discusses the design and cellular uptake of multifunctional folate-targeted cationic magnetoliposomes enabling doxorubicin delivery and SPIO labeling.

Experimental validation of proton transverse relaxivity models for superparamagnetic nanoparticle MRI contrast agents

Analytical models of proton transverse relaxation rate enhancement by magnetic nanoparticles were tested by making measurements on model experimental systems in a field of 1.4 T. Proton relaxivities were measured for five aqueous suspensions of iron oxide (maghemite) nanoparticles with nominal mean particle sizes of 6, 8, 10, 11, and 13 nm. Proton relaxivity increased with mean particle size ranging from 13 s(-1) mM Fe(-1) for the 6 nm sample, up to 254 s(-1) mM Fe(-1) for the 13 nm sample. A strong correlation between the measured and predicted values of the relaxivity was observed, with the predicted values being consistently higher than the measured values. The results indicate that the models give a reasonable agreement with experimental results and hence can be used as the basis for the design of new magnetic resonance imaging contrast and labelling agents.

Stabilization of superparamagnetic iron oxide core-gold shell nanoparticles in high ionic strength media

Nanoparticles with monodisperse, spherical magnetic iron oxide cores and contiguous gold shells (Fe/Au NPs) have been synthesized in order to combine magnetophoretic responsiveness and localized surface plasmon resonance in a single nanoparticle. Such particles are sufficiently charged to be stable against flocculation in low ionic strength media, but they require surface modification to be stably dispersed in elevated ionic strength media that are appropriate for biotechnological applications. Dynamic light scattering and ultraviolet-visible spectrophotometry are used to monitor the colloidal stability of Fe/Au NPs in pH 7.4 phosphate buffered saline containing 154 mM NaCl (PBS). While uncoated particles flocculate immediately upon introduction to PBS, Fe/Au NPs with adsorbed layers of bovine serum albumin or the amphiphilic triblock copolymers Pluronic F127 and Pluronic F68 resist flocculation after more than 5 days in PBS. Adsorbed dextran allowed flocculation that was limited to the formation of small clusters, while poly(ethylene glycol) homopolymers ranging in molecular weight from 6000 to 100 000 were ineffective steric stabilizers. The effectiveness of adsorbed Pluronic copolymers as steric stabilizers was interpreted in terms of the measured adsorbed layer thickness and extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory predictions of interparticle interactions.

Synthesis and colloidal properties of polyether-magnetite complexes in water and phosphate-buffered saline

Biocompatible magnetic nanoparticles show great promise for many biotechnological applications. This paper addresses the synthesis and characterization of magnetite nanoparticles coated with poly(ethylene oxide) (PEO) homopolymers and amphiphilic poly(propylene oxide-b-ethylene oxide) (PPO-b-PEO) copolymers that were anchored through ammonium ions. Predictions and experimental measurements of the colloidal properties of these nanoparticles in water and phosphate-buffered saline (PBS) as functions of the polymer block lengths and polymer loading are reported. The complexes were found to exist as primary particles at high polymer compositions, and most formed small clusters with equilibrium sizes as the polymer loading was reduced. Through implementation of a polymer brush model, the size distributions from dynamic light scattering (DLS) were compared to those from the model. For complexes that did not cluster, the experimental sizes matched the model well. For complexes that clustered, equilibrium diameters were predicted accurately through an empirical fit derived from DLS data and the half-life for doublet formation calculated using the modified Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Deviation from this empirical fit provided insight into possible additional interparticle hydrophobic interactions for select complexes for which the DLVO theory could not account. While the polymers remained bound to the nanoparticles in water, most of them desorbed slowly in PBS. Desorption was slowed significantly at high polymer chain densities and with hydrophobic PPO anchor blocks. By tailoring the PPO block length and the number of polymer chains on the surface, flocculation of the magnetite complexes in PBS was avoided. This allows for in vitro experiments where appreciable flocculation or sedimentation will not take place within the specified time scale requirements of an experiment.