Langmuir adsorption study of the interaction of CdSe/ZnS quantum dots with model substrates: influence of substrate surface chemistry and pH

Solution properties of spherical gold nanoparticles with grafted DNA chains from simulation and theory

There has been a rapidly growing interest in the use of functionalized Au nanoparticles (NPs) as platforms in multiple applications in medicine and manufacturing. The sensing and targeting characteristics of these NPs, and the realization of precisely organized structures in manufacturing applications using such NPs, depend on the control of their surface functionalization. NP functionalization typically takes the form of polymer grafted layers, and a detailed knowledge of the chemical and structural properties of these layers is required to molecularly engineer the particle characteristics for specific applications. However, the prediction and experimental determination of these properties to enable the rational engineering of these particles is a persistent problem in the development of this class of materials. To address this situation, molecular dynamic simulations were performed based on a previously established coarse-grained single-stranded DNA (ssDNA) model to determine basic solution properties of model ssDNA-grafted NP-layers under a wide range of conditions. In particular, we emphasize the calculation of the hydrodynamic radius for ssDNA-grafted Au NPs as a function of structural parameters such as ssDNA length, NP core size, and surface coverage. We also numerically estimate the radius of gyration and the intrinsic viscosity of these NPs, which in combination with hydrodynamic radius estimates, provide valuable information about the fluctuating structure of the grafted polymer layers. We may then understand the origin of the commonly reported variation in effective NP "size" by different measurement methods, and then exploit this information in connection to material design and characterization in connection with the ever-growing number of applications utilizing polymer-grafted NPs.

The detection and characterization techniques for the interaction between graphene oxide and natural colloids: A review

The high dispersibility of graphene oxide (GO) and the universality of natural colloids (clay minerals, (hydr)oxides of Al, Fe, silica, etc.) make them interact easily. Many kinds of analytical methods have been used to study the interaction between GO and natural colloids. This review provides a comprehensive overview of analytical methods for the detection and quantification of interaction process. We highlighted the influence of the most relevant environmental factors (ionic strength, pH, etc.) on batch experiment, quartz crystal microbalance with dissipation monitoring measurements, and column experiments. Besides, the benefits and drawbacks of spectroscopic, microscopic techniques, theoretical models, calculation and time-resolved dynamic light scattering methods also have discussed in this work. This review can give some guidance to researchers in their selection and combination of the technique for the research of the interaction between GO and natural colloids.

Kinetic description of site ensembles on catalytic surfaces

We demonstrate that the Langmuir-Hinshelwood formalism is an incomplete kinetic description and, in particular, that the Hinshelwood assumption (i.e., that adsorbates are randomly distributed on the surface) is inappropriate even in catalytic reactions as simple as A + A → A₂ The Hinshelwood assumption results in miscounting of site pairs (e.g., A*-A*) and, consequently, in erroneous rates, reaction orders, and identification of rate-determining steps. The clustering and isolation of surface species unnoticed by the Langmuir-Hinshelwood model is rigorously accounted for by derivation of higher-order rate terms containing statistical factors specific to each site ensemble. Ensemble-specific statistical rate terms arise irrespective of and couple with lateral adsorbate interactions, are distinct for each elementary step including surface diffusion events (e.g., A* + * → * + A*), and provide physical insight obscured by the nonanalytical nature of the kinetic Monte Carlo (kMC) method-with which the higher-order formalism quantitatively agrees. The limitations of the Langmuir-Hinshelwood model are attributed to the incorrect assertion that the rate of an elementary step is the same with respect to each site ensemble. In actuality, each elementary step-including adsorbate diffusion-traverses through each ensemble with unique rate, reversibility, and kinetic-relevance to the overall reaction rate. Explicit kinetic description of ensemble-specific paths is key to the improvements of the higher-order formalism; enables quantification of ensemble-specific rate, reversibility, and degree of rate control of surface diffusion; and reveals that a single elementary step can, counter intuitively, be both equilibrated and rate determining.

Predominant Effect of Material Surface Hydrophobicity on Gypsum Scale Formation

Scale formation is an important challenge in water and wastewater treatment systems. However, due to the complex nature of membrane surfaces, the effects of specific membrane surface characteristics on scale formation are poorly understood. In this study, the independent effect of surface hydrophobicity on gypsum (CaSO₄·2H₂O) scale formation via surface-induced nucleation and bulk homogeneous nucleation was investigated using quartz crystal microbalance with dissipation (QCM-D) on self-assembled monolayers (SAMs) terminated with -OH, -CH₃, and -CF₃ functional groups. Results show that higher surface hydrophobicity enhances both surface-induced nucleation of gypsum and attachment of gypsum crystals formed from homogeneous nucleation in the bulk solution. The enhanced surface-induced nucleation is attributed to the lower nucleation energy barrier on a hydrophobic surface, while the increased gypsum crystal attachment results from the favorable hydrophobic interactions between gypsum and more hydrophobic surfaces. Contrary to previous findings, the role of Ca²⁺ adsorption in surface-induced nucleation was found to be relatively small and similar on the different SAMs. Therefore, increasing material hydrophilicity is a potential approach to reduce gypsum scaling.

Biosorption of tungstate onto garlic peel loaded with Fe(III), Ce(III), and Ti(IV)

In present study, garlic peel (GP) was modified by loading with Fe(III), Ti(IV), and Ce(III) through a cation exchange process, i.e., nGP-COOH + Mn+ = (nGP-COO)-Mn+ + nH+ (M = Fe, Ce, Ti), which could adsorb tungstate effectively under the weakly acidic conditions. The optimal initial pH for maximum adsorption of W(VI) was determined at 1~3 for Ti-GP, 1~4 for Fe-GP, and 3 for Ce-GP, respectively; and at pH 2.5, the corresponding maximum adsorption capacity for Fe-GP, Ti-GP, and Ce-GP was evaluated as 91.5 mg/g, 83 mg/g, and 84 mg/g tungsten respectively. Coexisting anions like chloride, sulfate, and carbonate showed little effect on tungsten adsorption, while fluoride and phosphate inhibited the adsorption drastically. The column adsorption showed that the breakthrough point for Ce-GP, Ti-GP, and Fe-GP was 180 min, 200 min, and 270 min respectively. And 0.1 mol/L NaOH effectively eluted the adsorbed tungsten, and concentration of the eluted solution had almost 6, 19.9, and 22 factors of the initial tungstate concentration correspondingly.

Lattice theory for binding of linear polymers to a solid substrate from polymer melts: I. Influence of chain connectivity on molecular binding and adsorption

Most theories of the binding of molecules to surfaces or for the association between molecules treat the binding species as structureless entities and neglect their rigidity and the changes in their stiffness induced by the binding process. The binding species are also taken to be "ideal," meaning that the existence of van der Waals interactions and changes in these interactions upon molecular binding are also neglected. An understanding of the thermodynamics of these multifunctional molecular binding processes has recently come into focus in the context of the molecular binding of complex molecules, such as dendrimers and DNA grafted nanoparticles, to surfaces where the degree of binding cooperativity and selectivity, as well as the location of the binding transition, are found to be sensitive to the number of binding units constrained to a larger scale polymeric scaffold. We address the fundamental problem of molecular binding by extending classical Langmuir theory to describe the particular example of the reversible binding of semiflexible polymer chains to a solid substrate under melt conditions. The polymer chains are assumed to have a variable number N of binding units (segments) and to exhibit variable bending energies and van der Waals interactions in the bulk and on the surface, in addition to strong directional interactions with the surface. The resulting generalized Langmuir theory is applied to the examination of the influence of the chain connectivity of ideal polymers on the surface coverage Θ, transition binding temperature T_1/2 at which Θ = 1/2, and on the derivative |dΘ/dT|_T=T1/2 and the constant volume specific heat of binding, C_v ^bind, measures of the cooperativity and "sharpness" of the binding transition, respectively. Paper II is devoted to the impact of the van der Waals attractive interactions and chain stiffness on the reversible binding of nonideal polymer chains to a solid surface, including the enthalpy-entropy compensation phenomenon observed experimentally in many molecular and particle binding processes.

Bi-inorganic-ligand coordinated colloidal quantum dot ink

The novel ligand-exchange strategy enhances electric double layers, stabilizing QDs in low polarity butylamine, which alleviates the ligand loss.

Unexpected Optical Blue Shift in Large Colloidal Quantum Dots by Anionic Migration and Exchange

Compositional changes taking place during the synthesis of alloyed CdSeZnS nanocrystals (NCs) allow shifting of the optical features to higher energy as the NCs grow. Under certain synthetic conditions, the effect of those changes on the surface/interface chemistry competes with and dominates over the conventional quantum confinement effect in growing NCs. These changes, identified by means of complementary advanced spectroscopic techniques such as XPS (X-ray photoelectron spectroscopy) and XAS (X-ray absorption spectroscopy), are understood in the frame of an ion migration and exchange mechanism taking place during the synthesis. Control over the synthetic routes during NC growth represents an alternative tool to tune the optical properties of colloidal quantum dots, broadening the versatility of the wet chemical methods.

Adsorption of Catalytic Nanoparticles onto Polymer Substrates for Controlled Deposition of Microcapsule Metal Shells

Efficient encapsulation of small chemical molecules and their controlled targeted delivery provides a very important challenge to be overcome for a wide range of industrial applications. Typically rapid diffusion of these actives across capsule walls has so far prevented the development of a versatile widely applicable solution. In an earlier publication, we have shown that thin metal shells are able to permanently retain small molecules. The critical step in the microcapsule synthesis is the formation of a strongly adsorbed, dense monolayer of catalytic nanoparticles on the surface as this affects the secondary metal film quality. Control over Pt-nanoparticle adsorption density and a clear understanding of Pt-nanoparticle adsorption kinetics is therefore paramount. Maximising the density of heterogeneous catalysts on surfaces is generally of interest to a broad range of applications. In this work, transmission electron microscopy (TEM) and quartz crystal microbalance (QCM) are used to demonstrate that the concentration of nanoparticle polymer stabilizer used during particle synthesis and nanoparticle suspension concentration can be used to control nanoparticle surface adsorption density. We demonstrate that excess polymer, which is often used in nanoparticle synthesis but rarely discussed as an important parameter in the literature, can compete with and thus drastically affect the adsorption of the Pt-nanoparticles.

Probing the interactions of organic molecules, nanomaterials, and microbes with solid surfaces using quartz crystal microbalances: methodology, advantages, and limitations

Quartz crystal microbalances (QCMs) provide a new analytical opportunity and prospect to characterize many environmental processes at solid/liquid interfaces, thanks to their almost real-time measurement of physicochemical changes on their quartz sensor. This work reviews the applications of QCMs in probing the interactions of organic molecules, nanomaterials (NMs) and microbes with solid surfaces. These interfacial interactions are relevant to critical environmental processes such as biofilm formation, fate and transport of NMs, fouling in engineering systems and antifouling practices. The high sensitivity, real-time monitoring, and simultaneous frequency and dissipation measurements make QCM-D a unique technique that helps reveal the interaction mechanisms for the abovementioned processes (e.g., driving forces, affinity, kinetics, and the interplay between surface chemistry and solution chemistry). On the other hand, QCM measurement is nonselective and spatially-dependent. Thus, caution should be taken during data analysis and interpretation, and it is necessary to cross-validate the results using complementary information from other techniques for more quantitative and accurate interpretation. This review summarizes the general methodologies for collecting and analyzing raw QCM data, as well as for evaluating the associated uncertainties. It serves to help researchers gain deeper insights into the fundamentals and applications of QCMs, and provides new perspectives on future research directions.

Retention of silver nano-particles and silver ions in calcareous soils: Influence of soil properties

The rapid production and application of silver nanoparticles (AgNPs) have led to significant release of AgNPs into the terrestrial environments. Once released into the soil, AgNPs could enter into different interactions with soil particles which play key roles in controlling the fate and transport of these nanoparticles. In spite of that, experimental studies on the retention of AgNPs in soils are very scarce. Hence, the key objective of this research was to find out the retention behavior of AgNPs and Ag(I) ions in a range of calcareous soils. A second objective was to determine the extent to which the physico-chemical properties of the soils influence the Ag retention parameters. To this end, isothermal batch experiments were used to determine the retention of Poly(vinylpyrrolidinone)-capped AgNPs (PVP-AgNPs) and Ag(I) ions by nine calcareous soils with a diversity of physico-chemical properties. The results revealed that the retention data for both PVP-AgNPs and Ag(I) ions were well described by the classical Freundlich and Langmuir isothermal equations. The retention of PVP-AgNPs and Ag(I) ions was positively correlated to clay and organic carbon (OC) contents as well as electrical conductivity (EC), pH, and cation exchange capacity (CEC) of the soils. Due to multicolinearity among the soil properties, principal component analysis (PCA) was used to group the soil properties which affect the retention of PVP-AgNPs and Ag(I) ions. Accordingly, we identified two groups of soil properties controlling retention of PVP-AgNPs and Ag(I) ions in the calcareous soils. The first group comprised soil solid phase parameters like clay, OC, and CEC, which generally control hetero-aggregation and adsorption reactions and the second group included soil solution variables such as EC and pH as well as Cl^- and Ca²⁺ concentrations, which are supposed to mainly affect homo-aggregation and precipitation reactions.

Highly sensitive, direct and real-time detection of silver nanowires by using a quartz crystal microbalance

For several decades, silver nanomaterials (AgNMs) have been used in various research areas and commercial products. Among the many AgNMs, silver nanowires (AgNWs) are one of the mostly widely used nanomaterials due to their high electrical and thermal conductivity. However, recent studies have investigated the toxicity of AgNWs. For this reason, it is necessary to develop a successful detection method of AgNWs for protecting human health. In this study, label-free, highly sensitive, direct, and real-time detection of AgNWs is performed for the first time. The detection mechanism is based on the resonance frequency shift upon the mass change from the hybridization between the probe DNA on the electrode and the linker DNA attached on AgNWs. The frequency shift is measured by using a quartz crystal microbalance. We are able to detect 1 ng ml^-1 of AgNWs in deionized water in real-time. Moreover, our detection method can selectively detect AgNWs among other types of one-dimensional nanomaterials and can also be applied to detection in drinking water.

Bead-based microarray immunoassay for lung cancer biomarkers using quantum dots as labels

In this study, we developed a multiplex immunoassay system that combines the suspension and planar microarray formats within a single layer of polydimethylsiloxane (PDMS) using soft lithography technology. The suspension format was based on the target proteins forming a sandwich structure between the magnetic beads and the quantum dot (QD) probes through specific antibody-antigen interactions. The planar microarray format was produced by fabricating an array of micro-wells in PDMS. Each micro-well was designed to trap a single microbead and eventually generated a microbead array within the PDMS chamber. The resultant bead-based on-chip assay could be used for simultaneously detecting three lung cancer biomarkers-carcinoembryonic antigen (CEA), fragments of cytokeratin 19 (CYFRA21-1) and neuron-specific enolase (NSE)-in 10 μl of human serum, with a wide linear dynamic range (1.03-111 ng/mL for CEA and CYFRA21-1; 9.26-1000 ng/ml for NSE) and a low detection limit (CEA: 0.19 ng/ml; CYFRA21-1: 0.97 ng/ml; NSE: 0.37 ng/ml; S/N=3). Our micro-well chip does not require complex e-beam lithography or the reactive ion etching process as with existing micro-well systems, which rely on expensive focused ion beam (FIB) milling or optical fiber bundles. Furthermore, the current approach is easy to operate without extra driving equipment such as pumps, and can make parallel detection for multiplexing with rapid binding kinetics, small reagent consumption and low cost. This work has demonstrated the importance of the successful application of on-chip multiplexing sandwich assays for the detection of biomarker proteins.

Long-Term Retention of Small, Volatile Molecular Species within Metallic Microcapsules

Encapsulation and full retention of small molecular weight active ingredients is a challenging task that remains unsolved by current technologies used in industry and academia. In particular, certain everyday product formulations provide difficult environments in which preventing active leakage through capsule walls is not feasible. For example, a continuous phase that can fully dissolve an encapsulated active will typically force full release over a fraction of the intended lifetime of a product. This is due to the inherent porosity of polymeric membranes typically used as capsule wall material in current technologies. In this study, we demonstrate a method for preventing undesired loss of encapsulated actives under these extreme conditions using a simple threestep process. Our developed methodology, which forms an impermeable metal film around polymer microcapsules, prevents loss of small, volatile oils within an ethanol continuous phase for at least 21 days while polymeric capsules lose their entire content in less than 30 min under the same conditions. Polymer shell-oil core microcapsules are produced using a well-known cosolvent extraction method to precipitate a polymeric shell around the oil core. Subsequently, metallic catalytic nanoparticles are physically adsorbed onto the microcapsule polymeric shells. Finally, this nanoparticle coating is used to catalyze the growth of a secondary metallic film. Specifically, this work shows that it is possible to coat polymeric microcapsules containing a model oil system or a typical fragrance oil with a continuous metal shell. It also shows that the coverage of nanoparticles on the capsule surface can be controlled, which is paramount for obtaining a continuous impermeable metal film. In addition, control over the metal shell thickness is demonstrated without altering the capability of the metal film to retain the encapsulated oils.

Adsorption of quantum dots onto polymer and Gemini surfactant films: a quartz crystal microbalance study

We used quartz crystal microbalance with dissipation to study the mechanical properties, the kinetics of adsorption, and the amount of CdSe quantum dots (QDs) adsorbed onto a SiO2 sensor, referred as bare sensor, onto the sensor modified with a film of the polymer poly(maleic anhydride-alt-1-octadecene), PMAO, or with a film of the Gemini surfactant ethyl-bis(dimethyl octadecyl ammonium bromide), abbreviated as 18-2-18. Results showed that when the sensor is coated with polymer or surfactant molecules, the coverage increases compared with that obtained for the bare sensor. On the other hand, rheological properties and kinetics of adsorption of QDs are driven by QD nanoparticles. Thus, the QD films present elastic behavior, and the elasticity values are independent of the molecule used as coating and similar to the elasticity value obtained for QDs films on the bare sensor. The QD adsorption is a two-step mechanism in which the fastest process is attributed to the QD adsorption onto the solid substrate and the slowest one is ascribed to rearrangement movements of the nanoparticles adsorbed at the surface.

Langmuir analysis of nanoparticle polyvalency in DNA-mediated adsorption

Many nanoparticle adsorption processes are dictated by the collective interactions of surface-bound ligands. These adsorption processes define how nanoparticles interact with biological systems and enable the assembly of nanoparticle-based materials and devices. Herein, we present an approach for quantifying nanoparticle adsorption thermodynamics in a manner that satisfies the assumptions of the Langmuir model. Using this approach, we study the DNA-mediated adsorption of polyvalent anisotropic nanoparticles on surfaces and explore how deviations from model assumptions influence adsorption thermodynamics. Importantly, when combined with a solution-based van't Hoff analysis, we find that polyvalency plays a more important role as the individual interactions become weaker. Furthermore, we find that the free energy of anisotropic nanoparticle adsorption is consistent across multiple shapes and sizes of nanoparticles based on the surface area of the interacting facet.

The role of ligands in determining the exciton relaxation dynamics in semiconductor quantum dots

This article reviews the mechanisms through which molecules adsorbed to the surfaces of semiconductor nanocrystals, quantum dots (QDs), influence the pathways for and dynamics of intra- and interband exciton relaxation in these nanostructures. In many cases, the surface chemistry of the QDs determines the competition between Auger relaxation and electronic-to-vibrational energy transfer in the intraband cooling of hot carriers, and between electron or hole-trapping processes and radiative recombination in relaxation of band-edge excitons. The latter competition determines the photoluminescence quantum yield of the nanocrystals, which is predictable through a set of mostly phenomenological models that link the surface coverage of ligands with specific chemical properties to the rate constants for nonradiative exciton decay.

Sorption of silver nanoparticles to environmental and model surfaces

The fate of engineered nanoparticles in environmental systems is controlled by changes in colloidal stability and their interaction with different environmental surfaces. Little is known about nanoparticle-surface interactions on the basis of sorption isotherms under quasi-equilibrium conditions, although sorption isotherms are a valuable means of studying sorbate-sorbent interactions. We tested the extent to which the sorption of engineered silver nanoparticles (nAg) from stable and unstable suspensions to model (sorbents with specific chemical functional groups) and environmental (plant leaves and sand) surfaces can be described by classical sorption isotherms. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) qualitative and quantitative analyses were also used to assess the morphology and nanomechanical parameters of the covered surfaces. The sorption of nAg from stable suspensions was nonlinear and best described by the Langmuir isotherm. Langmuir coefficients varied with sorbent surface chemistry. For nAg sorption from an unstable suspension, the sorption isotherms did not follow any classical sorption models, suggesting interplay between aggregation and sorption. The validity of the Langmuir isotherm suggests monolayer sorption, which can be explained by the blocking effect due to electrostatic repulsion of individual nanoparticles. In unstable suspensions, aggregates are instead formed in suspension and then sorbed, formed on the surface itself, or formed in both ways.

Iron oxide nanoparticles grafted with sulfonated copolymers are stable in concentrated brine at elevated temperatures and weakly adsorb on silica

Magnetic nanoparticles that can be transported in subsurface reservoirs at high salinities and temperatures are expected to have a major impact on enhanced oil recovery, carbon dioxide sequestration, and electromagnetic imaging. Herein we report a rare example of steric stabilization of iron oxide (IO) nanoparticles (NPs) grafted with poly(2-acrylamido-2-methylpropanesulfonate-co-acrylic acid) (poly(AMPS-co-AA)) that not only display colloidal stability in standard American Petroleum Institute (API) brine (8% NaCl + 2% CaCl2 by weight) at 90 °C for 1 month but also resist undesirable adsorption on silica surfaces (0.4% monolayer NPs). Because the AMPS groups interacted weakly with Ca(2+), they were sufficiently well solvated to provide steric stabilization. The PAA groups, in contrast, enabled covalent grafting of the poly(AMPS-co-AA) chains to amine-functionalized IO NPs via formation of amide bonds and prevented polymer desorption even after a 40,000-fold dilution. The aforementioned methodology may be readily adapted to stabilize a variety of other functional inorganic and organic NPs at high salinities and temperatures.

Deposition kinetics of quantum dots and polystyrene latex nanoparticles onto alumina: role of water chemistry and particle coating

A clear understanding of the factors controlling the deposition behavior of engineered nanoparticles (ENPs), such as quantum dots (QDs), is necessary for predicting their transport and fate in natural subsurface environments and in water filtration processes. A quartz crystal microbalance with dissipation monitoring (QCM-D) was used to study the effect of particle surface coatings and water chemistry on the deposition of commercial QDs onto Al2O3. Two carboxylated QDs (CdSe and CdTe) with different surface coatings were compared with two model nanoparticles: sulfate-functionalized (sPL) and carboxyl-modified (cPL) polystyrene latex. Deposition rates were assessed over a range of ionic strengths (IS) in simple electrolyte (KCl) and in electrolyte supplemented with two organic molecules found in natural waters; namely, humic acid and rhamnolipid. The Al2O3 collector used here is selected to be representative of oxide patches found on the surface of aquifer or filter grains. Deposition studies showed that ENP deposition rates on bare Al2O3 generally decreased with increasing salt concentration, with the exception of the polyacrylic-acid (PAA) coated CdTe QD which exhibited unique deposition behavior due to changes in the conformation of the PAA coating. QD deposition rates on bare Al2O3 were approximately 1 order of magnitude lower than those of the polystyrene latex nanoparticles, likely as a result of steric stabilization imparted by the QD surface coatings. Adsorption of humic acid or rhamnolipid on the Al2O3 surface resulted in charge reversal of the collector and subsequent reduction in the deposition rates of all ENPs. Moreover, the ratio of the two QCM-D output parameters, frequency and dissipation, revealed key structural information of the ENP-collector interface; namely, on bare Al2O3, the latex particles were rigidly attached as compared to the more loosely attached QDs. This study emphasizes the importance of considering the nature of ENP coatings as well as organic molecule adsorption onto particle and collector surfaces to avoid underestimating ENP mobility in natural and engineered aquatic environments.

Adsorption-desorption study of BSA conjugated silver nanoparticles (Ag/BSA NPs) on collagen immobilized substrates

There has been a growing interest in the use of protein conjugated nanoparticles for applications in biomedical, sensing, and advanced imaging. The objective of this study was to understand the interaction of protein conjugated silver nanoparticles (Ag/BSA NPs) with biological substrate (collagen layer). The adsorption behavior of synthesized Ag/BSA NPs on collagen immobilized silanized surface was followed by UV-vis spectroscopy by initially studying the formation of collagen layer and subsequent adsorption of Ag/BSA NPs to the immobilized layer. Surface plasmon resonance (SPR) data provided the real time profile of adsorption of Ag/BSA NPs from solution onto collagen immobilized and control substrates as well as desorption of nanoparticles from the substrates. The retention of NPs to substrate is sensitive to chemistry of the underlying substrate and on the external environment. UV-vis and atomic absorption spectrometric analysis of Ag/BSA NPs desorption performed under different pH conditions showed more NPs retained at physiological pH than the acidic and basic conditions. Nanoparticles retention on collagen immobilized substrate at physiological pH could influence properties of biological interest such as circulation lifetime and biodistribution of nanoparticles in the body.

Synthesis and micropatterning of photocatalytically reactive self-assembled monolayers covalently linked to Si(100) surfaces via a Si-C bond

Selective generation of an amine-terminated self-assembled monolayer bound to silicon wafers via a silicon-carbon linkage was realized by photocatalytically reducing the corresponding azide-terminated, self-assembled monolayers (Az-SAMs). The Az-SAM was obtained by thermal deposition of 11-chloroundecene onto a hydrogen-terminated silicon wafer followed by nucleophilic substitution of the chloride with the azide ion in warm N,N'-dimethylformamide (DMF). The presence of the terminal azide group on the SAM was confirmed by reflection absorption infrared spectroscopy (RAIRS), by X-ray photoelectron spectroscopy (XPS), and by detecting the formation of a triazole upon reaction of the azide with an activated alkyne. The desired terminal amine groups were generated by photocatalytic reduction of the Az-SAM with cadmium selenide quantum dots (CdSe Qdots) using λ > 400 nm. Analysis of the reduced SAM by XPS gave results that were consistent with those obtained with an amine-terminated surface obtained by reducing the Az-SAM with triphenylphosphine. To demonstrate the feasibility of using the Az-SAM for surface patterning, a sample was coated with adsorbed CdSe Qdots and exposed to the output of a diode laser at λ = 407 nm through a micropatterned mask. Using a SEM, the pattern formed in this manner was revealed after removing the CdSe Qdots and subsequently adsorbing 10 nm gold nanoparticles (AuNPs) to the positively charged terminal-amine groups. The formation of the pattern by CdSe-photocatalyzed reduction of the azide demonstrates a novel route to create features by selective modification of organic monolayers on silicon wafers.

Lithography of self-assembled semiconductor quantum dots on templates fabricated from mixed Langmuir-Blodgett films

In this paper, we discuss a useful technique to fabricate patterned single layers consisting of quantum dots on two-dimensional templates fabricated from phase-separated mixed Langmuir-Blodgett (LB) films. The phase-separated structures are governed by two competing interactions-line tension and dipole-dipole interaction-and are tunable by adjusting the intermolecular interactions between the film-forming molecules and the fabrication conditions. The templates can be fabricated from mixed LB films containing silane-coupling agents, which form covalent bonds with Si wafers. The CdS- or CdSe/ZnS-nanoparticles were immobilized on the templates using a chemisorption technique. The samples were analyzed using ultraviolet-visible absorption spectroscopy, emission spectroscopy, atomic force microscopy, scanning electron microscopy, and fluorescence microscopy. The diameters of the CdS-NPs and CdSe/ZnS were estimated to be about 2.6 and 4.5 nm, respectively, using the Brus equation. We successfully obtained a patterned single layer consisting of quantum dots on the templates. The density of the immobilized-CdSe/ZnS-NPs on these templates can be controlled through variations in the concentration of the aqueous dispersion of CdSe/ZnS-NPs. Fluorescence observations indicate that the immobilized-CdSe/ZnS-NPs on the templates serve as light-emitting devices. These results indicate that patterned quantum dots can be formed only through self-assembly processes.

Photofabrication of fullerene-shelled quantum dots supramolecular nanoparticles for solar energy harvesting

Quantum dots-based electron donor-acceptor systems play a rising role in the design of renewable and carbon-free energy harvesting technologies. In this article, we discuss the photofabrication of fullerene-shelled quantum dots supramolecular nanoparticles, in which the fullerene shell acts as not only a well-defined electron acceptor but also a robust protecting layer against the photocorrosion of the quantum dot core. We evaluate the ensemble and single-molecule electron transfer from the core to the shell in the nanoparticles and the photocurrent response of a photoelectrochemical cell constructed using the nanoparticles. The supramolecular nanoparticle has been prepared by the covalent tethering of a fullerene-thiol monolayer to the quantum dot followed by the photochemical reactions of free fullerene-thiol to the tethered monolayer. The nanoparticles are characterized using scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. Correlated single-photon emission and the two-state ON-OFF photoluminescence show that single quantum dots are included in the supramolecular nanoparticles. The fullerene-shells suppress the blinking of single quantum dots by acting as well-defined electron traps, without allowing the transfer of Auger electrons to unknown traps. Electron transfer from the quantum dot-core to the fullerene-shell is apparent from the short ON and OFF durations in the photoluminescence intensity trajectories of single quantum dots, quenching of the photoluminescence intensity and lifetime of quantum dots at the ensemble level, and the characteristic transient absorption band of the anion radical of fullerene. We next construct a photoelectrochemical cell using the supramolecular nanoparticles, and the transferred electron is externally driven in the cell to generate ∼400 μA/cm(2) photocurrent. Electron transfer from the highly stable quantum dots to the protecting fullerene-shells places the supramolecular nanoparticles among the most promising antenna systems for the construction of cost-effective and stable next generation solar energy harvesting systems.

Analysis of adsorption and binding behaviors of silver nanoparticles onto a pyridyl-terminated surface using XPS and AFM

In this study, we analyzed adsorption and binding behaviors of citrate-capped silver nanoparticles (AgNPs) on a pyridyl-terminated surface using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Adsorption of the AgNPs onto the pyridyl-terminated silicon wafer surface was completed through pH-controlled sol immersion. The adsorption occurred predominantly at a pH less than the pK(b) value of the pyridyl group and more than the pK(a1) of citric acid, indicating that the driving force behind adsorption was electrostatic interaction. Adsorption of citrate onto the pyridyl group also occurred at pK(a1) < pH < pK(b) without AgNPs. According to XPS in the N1s region, larger deprotonation from the pyridinium-formed pyridyl groups was demonstrated subsequent to adsorption of the AgNPs. The deprotonation from the pyridinium indicates the formation of the neutral pyridyl group as the counterpart of hydrogen bonding with the carboxyl group of citrate. The binding state between the pyridyl group and citrate surrounding AgNPs is expected to be kept stable through hydrogen bonding and van der Waals force derived from the AgNPs approach to the pyridyl surface.

Influence of surface oxidation on the aggregation and deposition kinetics of multiwalled carbon nanotubes in monovalent and divalent electrolytes

The aggregation and deposition kinetics of two multiwalled carbon nanotubes (MWNTs) with different degrees of surface oxidation are investigated using time-resolved dynamic light scattering (DLS) and quartz crystal microbalance with dissipation monitoring (QCM-D), respectively. Carboxyl groups are determined to be the predominant oxygen-containing surface functional groups for both MWNTs through X-ray photoelectron spectroscopy (XPS). The aggregation and deposition behavior of both MWNTs is in qualitative agreement with the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The critical coagulation concentration (CCC) of the highly oxidized MWNTs (HO-MWNTs) is significantly higher than the lowly oxidized MWNTs (LO-MWNTs) in the presence of NaCl (210 and 53 mM, respectively) since HO-MWNTs have a higher surface charge density. In contrast, the aggregation inverse stability profiles of HO-MWNTs and LO-MWNTs are identical and yield comparable CCCs (0.9 and 1.0 mM, respectively) in the presence of CaCl(2). Similar to the results obtained from the aggregation study, HO-MWNTs are considerably more stable to deposition on silica surfaces compared to LO-MWNTs in the presence of NaCl. However, both MWNTs have the same propensity to undergo deposition in the presence of CaCl(2). The remarkable similarity in the aggregation and deposition kinetics of HO-MWNTs and LO-MWNTs in CaCl(2) may be due to Ca(2+) cations having a higher affinity to form complexes with adjacent carboxyl groups on HO-MWNTs than with isolated carboxyl groups on LO-MWNTs.

Nonspecific adsorption of charged quantum dots on supported zwitterionic lipid bilayers: real-time monitoring by quartz crystal microbalance with dissipation

Understanding how the composition and environmental conditions of membranes influence their interactions with guest species is central to cell biology and biomedicine. We herein study the nonspecific adsorption of charged quantum dots (QDs) onto a supported zwitterionic lipid bilayer by using quartz crystal microbalance with dissipation (QCM-D). It is demonstrated that (1) the adsorption of charged QDs is charge-dependent in a way similar to but much stronger than that of the capping molecules by reason of size effect; (2) the adsorption behavior of charged QDs is dominated by electrostatic interaction, which can be well described by an "adsorption window"; (3) the "adsorption window" can be broadened by exploiting the bridge role of Ca(2+) ions; and (4) by introducing a cationic lipid into the zwitterionic lipid bilayer, one can achieve preferential adsorption of anionic QDs but suppression of the cationic QD adsorption. Our QCM-D data also indicates that these different adsorption traits effect different changes in the dissipation of supported lipid bilayers (SLBs) after adsorption of the charged QDs. The different adsorption propensities of cationic and anionic QDs on SLBs have reinforced the picture of electrostatic interactions. We believe that these findings provide important information on QD-lipid membrane interactions, which will help to develop new drug molecules and efficient drug delivery systems, and to predict and unravel their potential toxicities if any.

Controlled assembly of hydrogenase-CdTe nanocrystal hybrids for solar hydrogen production

We present a study of the self-assembly, charge-transfer kinetics, and catalytic properties of hybrid complexes of CdTe nanocrystals (nc-CdTe) and Clostridium acetobutylicum [FeFe]-hydrogenase I (H(2)ase). Molecular assembly of nc-CdTe and H(2)ase was mediated by electrostatic interactions and resulted in stable, enzymatically active complexes. The assembly kinetics was monitored by nc-CdTe photoluminescence (PL) spectroscopy and exhibited first-order Langmuir adsorption behavior. PL was also used to monitor the transfer of photogenerated electrons from nc-CdTe to H(2)ase. The extent to which the intramolecular electron transfer (ET) contributed to the relaxation of photoexcited nc-CdTe relative to the intrinsic radiative and nonradiative (heat dissipation and surface trapping) recombination pathways was shown by steady-state PL spectroscopy to be a function of the nc-CdTe/H(2)ase molar ratio. When the H(2)ase concentration was lower than the nc-CdTe concentration during assembly, the resulting contribution of ET to PL bleaching was enhanced, which resulted in maximal rates of H(2) photoproduction. Photoproduction of H(2) was also a function of the nc-CdTe PL quantum efficiency (PLQE), with higher-PLQE nanocrystals producing higher levels of H(2), suggesting that photogenerated electrons are transferred to H(2)ase directly from core nanocrystal states rather than from surface-trap states. The duration of H(2) photoproduction was limited by the stability of nc-CdTe under the reactions conditions. A first approach to optimization with ascorbic acid present as a sacrificial donor resulted in photon-to-H(2) efficiencies of 9% under monochromatic light and 1.8% under AM 1.5 white light. In summary, nc-CdTe and H(2)ase spontaneously assemble into complexes that upon illumination transfer photogenerated electrons from core nc-CdTe states to H(2)ase, with low H(2)ase coverages promoting optimal orientations for intramolecular ET and solar H(2) production.

Characterization of non-equilibrium nanoparticle adsorption on a model biological substrate

The kinetics of nanoparticle (NP) adsorption on a model biological interface (collagen) is measured in microfluidic channels using surface plasmon resonance (SPR) imaging over a range of CdSe/ZnS quantum dot concentrations to investigate the underlying binding process. Spherical CdSe/ZnS core-shell NP, derivatized with 3-mercaptopropionic acid (3-MPA), were considered to be model NPs because of their widespread use in biological applications and their relatively monodisperse size. The kinetic adsorption data suggests that the binding between the NP and the collagen substrate is irreversible at room temperature (pH approximately 7.4), and this type of adsorption process was further characterized in the context of a surface absorption model. Specifically, diffusion-limited adsorption was found to predominate the adsorption process at lower concentrations (<0.4 micromol/L), and NP adsorption was reaction-limited at higher concentration (>0.4 micromol/L). A limited pH study of our system indicates that NPs desorb from collagen under acidic conditions (pH 5.5); no significant desorption was observed under neutral and basic pH conditions. These observations are consistent with electrostatic interactions being the dominant force governing NP desorption from collagen substrates. Our present methodology for characterizing the seemingly irreversible NP adsorption complements our earlier study where NP adsorption onto weakly adsorbing surfaces (self-assembled monolayers) was characterized by Langmuir NP adsorption measurements.