A Comparison of the Dynamical Relaxations in a Model for Glass Transition in Polymer Nanocomposites and Polymer Thin Films

The influence of additives on polymer matrix mobility and the glass transition

In the region near an interface, the microscopic properties of a glass forming liquid may be perturbed from their equilibrium bulk values. In this work, we probe how the interfacial effects of additive particles dispersed in a matrix can influence the local mobility of the material and its glass transition temperature, Tg. Experimental measurements and simulation results indicate that additives, such as nanoparticles, gas molecules, and oligomers, can shift the mobility and Tg of a surrounding polymer matrix (even for relatively small concentrations of additive; e.g., 5-10% by volume) relative to the pure bulk matrix, thus leading to Tg enhancement or suppression. Additives thus provide a potential route for modifying the properties of a polymer material without significantly changing its chemical composition. Here we apply the Limited Mobility (LM) model to simulate a matrix containing additive species. We show that both additive concentration, as well as the strength of its very local influence on the surrounding matrix material, will determine whether the Tg of the system is raised or lowered, relative to the pure matrix. We demonstrate that incorporation of additives into the simple LM simulation method, which has successfully described the behavior of bulk and thin film glassy solids, leads to direct connections with available experimental and simulation results for a broad range of polymer/additive systems.

Spatial Dependence of Non-Gaussian Diffusion of Nanoparticles in Free-Standing Thin Polymer Films

The addition of nanoparticles (NPs) to a free-standing polymer film affects the properties of the film such as viscosity and glass transition temperature. Recent experiments, for example, showed that the glass transition temperature of thin polymer films was dependent on how NPs were distributed within the polymer films. However, the spatial arrangement of NPs in free-standing polymer films and its effect on the diffusion of NPs and polymers remain elusive at a molecular level. In this study, we employ generic coarse-grained models for polymers and NPs and perform extensive molecular dynamics simulations to investigate the diffusion of polymers and NPs in free-standing thin polymer films. We find that small NPs are likely to stay at the interfacial region of the polymer film, while large NPs tend to stay at the center of the film. On the other hand, as the interaction between a NP and a monomer becomes more attractive, the NP is more likely to be placed at the film center. The diffusion of monomers slows down slightly as more NPs are added to the film. Interestingly, the NP diffusion is dependent strongly on the spatial arrangement of the NPs: NPs at the interfacial region diffuse faster and undergo more non-Gaussian diffusion than NPs at the film center, which implies that the interfacial region would be more mobile and dynamically heterogeneous than the film center. We also find that the mechanism for non-Gaussian diffusion of NPs at the film center differs from that at the interfacial region and that the NP diffusion would reflect the local viscosity of the polymer films.

Influence of molecular weight on molecular dynamics and dynamic rheology of polypropylene glycol filled with silica

Molecular weight strongly influences the molecular dynamics and rheological responses of nanocomposites, which is far from being well understood. Herein molecular dynamics and rheological behaviors of hydrophilic fumed silica filled unentangled polypropylene glycol (PPG) were investigated as a function of weight averaged molecular weight (M w) of PPG and volume fraction (∅) of silica. It is shown that M w does not affect the glassy layers surrounding the nanoparticles and the segmental dynamics of the mobile PPG phase. On the other hand, the mobile PPG phase in the highly filled nanocomposites exhibits an abnormal "more fragile" to "stronger" transition with increasing M w. The reinforcement and thinning behaviors are stronger in lower-M w nanocomposites with the "more fragile" mobile PPG phase. The results suggest that reinforcement of nanocomposites affects the dynamic fragility of the mobile phase of the matrix.

The spatial arrangement of a single nanoparticle in a thin polymer film and its effect on the nanoparticle diffusion

The spatial arrangement of nanoparticles (NPs) within thin polymer films may influence their properties such as the glass transition temperature. Questions regarding what may affect the spatial arrangement of NPs, however, still remain unanswered at a molecular level. In this work, we perform molecular dynamics simulations for a free-standing thin polymer film with a single NP. We find from simulations that depending on the NP size and the inter-particle interaction between the NP and polymers, one may control the spatial arrangement of the NP. When the interaction between the NP and polymers is sufficiently attractive (repulsive), the NP is likely to be placed at the center (at the surface) of the thin film in equilibrium. Interestingly, for a moderate interaction between the NP and polymers, the first-order transition occurs in the spatial arrangement of the NP as one increases the NP size: a small NP prefers the surface of the polymer film whereas a large NP prefers the center. Such a first-order transition is corroborated by calculating the free energy of the NP as a function of the position and can be understood in terms of a sixth-order Landau free energy. More interestingly, the diffusion of the NP also changes drastically due to the first-order transition in the spatial arrangement. The NP diffusion is enhanced drastically (more than expected in bulk polymer melts) as the NP is shifted to the polymer film surface.

Effect of nanoparticle dispersion on glass transition in thin films of polymer nanocomposites

We present spectroscopic ellipsometry measurements on thin films of polymer nanocomposites consisting of gold nanoparticles embedded in poly(styrene). The temperature dependence of thickness variation is used to estimate the glass transition temperature, T(g). In these thin films we find a significant dependence of T(g) on the nature of dispersion of the embedded nanoparticles. Our work thus highlights the crucial role played by the particle polymer interface morphology in determining the glass transition in particular and thermo-mechanical properties of such nanocomposite films.

Experimental evidence for interplay of dynamic heterogeneity and finite-size effect in glassy polymers

Despite two decades of extensive research, direct experimental evidence of a dynamical length scale determining the glass transition of confined polymers has yet to emerge. Using a recently established experimental technique of interface micro-rheology we provide evidence of finite-size effect truncating the growth of a quantity proportional to a dynamical length scale in confined glassy polymers, on cooling towards the glass transition temperature. We show how the interplay of variation of polymer film thickness and this temperature-dependent growing dynamical length scale determines the glass transition temperature, which in our case of 2-3 nm thick films, is reduced significantly as compared to their bulk values.