Confinement-Induced High-Field Antiferroelectric-like Behavior in a Poly(vinylidene fluoride-co-trifluoroethylene-co-chlorotrifluoroethylene)-graft-polystyrene Graft Copolymer

All-Organic Polystyrene-Based Copolymer Dielectrics for Superior High-Temperature Charge Energy Storage with Robust Stability

Enhancing dielectric constant and breakdown field strength simultaneously, and exploring the design strategy of high charge energy storage properties at high-temperature environments are the core problems in thin film dielectrics. In this paper, γ-methyl-α-methylene-γ-butyrolactone (MeMBL) and styrene (St) are randomly copolymerized by free radical emulsion polymerization to obtain dielectric films with high energy density. The introduction of MeMBL units containing highly polar groups (ester groups as well as lactone rings) not only improves the dielectric constant and Tg of the copolymer but also creates trap sites for the capture of free charge carriers. The homogeneously distributed trap sites can effectively trap free space charges and thus significantly suppress the conduction under high electric fields and improve the breakdown strength under high temperatures. When utilized for dielectric energy storage, Poly(St-co-MeMBL) can achieve a discharge energy density of 8.08 J cm-3 at room temperature. Even at 150 °C, Poly(St-co-MeMBL) can still provide a discharge energy density of 4.69 J cm-3 with a charge/discharge efficiency of 88%. Moreover, Poly(St-co-MeMBL) dielectric films present excellent robustness and long-term working stability over 103 charge-discharge cycles. The proposed design concept presents a novel way of manufacturing linear dielectric materials for high-temperature energy storage and electronics.

Engineering the Dielectric Constants of Polymers: From Molecular to Mesoscopic Scales

Polymers are essential components of modern-day materials and are widely used in various fields. The dielectric constant, a key physical parameter, plays a fundamental role in the light-, electricity-, and magnetism-related applications of polymers, such as dielectric and electrical insulation, battery and photovoltaic fabrication, sensing and electrical contact, and signal transmission and communication. Over the past few decades, numerous efforts have been devoted to engineering the intrinsic dielectric constant of polymers, particularly by tailoring the induced and orientational polarization modes and ferroelectric domain engineering. Investigations into these methods have guided the rational design and on-demand preparation of polymers with desired dielectric constants. This review article exhaustively summarizes the dielectric constant engineering of polymers from molecular to mesoscopic scales, with emphasis on application-driven design and on-demand polymer synthesis rooted in polymer chemistry principles. Additionally, it explores the key polymer applications that can benefit from dielectric constant regulation and outlines the future prospects of this field.

The Effect of Electric Aging on Vinylidene Fluoride Copolymers for Ferroelectric Memory

Copolymers based on vinylidene fluoride are potential materials for ferroelectric memory elements. The trend in studies showing that a decrease in the degree of crystallinity can lead to an unexpected increase in the electric breakdown field is noted. An analysis of the literature data reveals that in fluorine-containing ferroelectric polymers, when using a bipolar triangular field, the hysteresis loop has an unclosed shape, with each subsequent loop being accompanied by a decrease in the dielectric response. In this work, the effect of the structure of self-polarized films of copolymers of vinylidene fluoride with tetrafluoroethylene and hexafluoropropylene on breakdown processes was studied. The structure of the polymer films was monitored using infrared spectroscopy (IR) and X-ray diffraction. Kelvin probe force microscopy (KPFM) was applied to characterize the local electrical properties of the polymers. For the films of the first copolymer, which crystallize in the polar β-phase, asymmetry in the dielectric response was observed at fields greater than the coercive field. For the films of the copolymers of vinylidene fluoride with hexafluoropropylene, which crystallize predominantly in the nonpolar α-phase, polarization switching processes have also been observed, but at lower electric fields. The noted phenomena will help to identify the influence of the structure of ferroelectric polymers on their electrical properties.

Selective and Controlled Grafting from PVDF-Based Materials by Oxygen-Tolerant Green-Light-Mediated ATRP

Poly(vinylidene fluoride) (PVDF) shows excellent chemical and thermal resistance and displays high dielectric strength and unique piezoelectricity, which are enabling for applications in membranes, electric insulators, sensors, or power generators. However, its low polarity and lack of functional groups limit wider applications. While inert, PVDF has been modified by grafting polymer chains by atom transfer radical polymerization (ATRP), albeit via an unclear mechanism, given the strong C-F bonds. Herein, we applied eosin Y and green-light-mediated ATRP to modify PVDF-based materials. The method gave nearly quantitative (meth)acrylate monomer conversions within 2 h without deoxygenation and without the formation of unattached homopolymers, as confirmed by control experiments and DOSY NMR measurements. The gamma distribution model that accounts for broadly dispersed polymers in DOSY experiments was essential and serves as a powerful tool for the analysis of PVDF. The NMR analysis of poly(methyl acrylate) graft chain-ends on PVDF-CTFE (statistical copolymer with chlorotrifluoroethylene) was carried out successfully for the first time and showed up to 23 grafts per PVDF-CTFE chain. The grafting density was tunable depending on the solvent composition and light intensity during the grafting. The initiation proceeded either from the C-Cl sites of PVDF-CTFE or via unsaturations in the PVDF backbones. The dehydrofluorinated PVDF was 20 times more active than saturated PVDF during the grafting. The method was successfully applied to modify PVDF, PVDF-HFP, and Viton A401C. The obtained PVDF-CTFE-g-PnBMA materials were investigated in more detail. They featured slightly lower crystallinity than PVDF-CTFE (12-18 vs 24.3%) and had greatly improved mechanical performance: Young's moduli of up to 488 MPa, ductility of 316%, and toughness of 46 × 106 J/m3.

Energy Storage Performance of Polymer-Based Dielectric Composites with Two-Dimensional Fillers

Dielectric capacitors have garnered significant attention in recent decades for their wide range of uses in contemporary electronic and electrical power systems. The integration of a high breakdown field polymer matrix with various types of fillers in dielectric polymer nanocomposites has attracted significant attention from both academic and commercial sectors. The energy storage performance is influenced by various essential factors, such as the choice of the polymer matrix, the filler type, the filler morphologies, the interfacial engineering, and the composite structure. However, their application is limited by their large amount of filler content, low energy densities, and low-temperature tolerance. Very recently, the utilization of two-dimensional (2D) materials has become prevalent across several disciplines due to their exceptional thermal, electrical, and mechanical characteristics. Compared with zero-dimensional (0D) and one-dimensional (1D) fillers, two-dimensional fillers are more effective in enhancing the dielectric and energy storage properties of polymer-based composites. The present review provides a comprehensive overview of 2D filler-based composites, encompassing a wide range of materials such as ceramics, metal oxides, carbon compounds, MXenes, clays, boron nitride, and others. In a general sense, the incorporation of 2D fillers into polymer nanocomposite dielectrics can result in a significant enhancement in the energy storage capability, even at low filler concentrations. The current challenges and future perspectives are also discussed.

Synthesis and Properties of the Novel High-Performance Hydroxyl-Terminated Liquid Fluoroelastomer

Functional liquid fluoroelastomers are in high demand in new energy fields. And these materials have potential applications in high-performance sealing materials and as electrode materials. In this study, a novel high-performance hydroxyl-terminated liquid fluoroelastomer (t-HTLF) with a high fluorine content, temperature resistance, and curing efficiency was synthesised from a terpolymer of vinylidene fluoride (VDF), tetrafluoroethylene (TFE), and hexafluoropylene (HFP). A carboxyl-terminated liquid fluoroelastomer (t-CTLF) with controllable molar mass and end-group content was first prepared from a poly(VDF-ter-TFE-ter-HFP) terpolymer using a unique oxidative degradation method. Subsequently, an efficient "one-step" reduction of the carboxyl groups (COOH) in t-CTLF into hydroxyl groups (OH) was achieved via the functional-group conversion method using lithium aluminium hydride (LiAlH₄) as the reductant. Thus, t-HTLF with a controllable molar mass and end-group content and highly active end groups was synthesised. Owing to the efficient curing reaction between OH and isocyanate groups (NCO), the cured t-HTLF exhibits good surface properties, thermal properties, and chemical stability. The thermal decomposition temperature (T_d) of the cured t-HTLF reaches 334 °C, and it exhibits hydrophobicity. The oxidative degradation, reduction, and curing reaction mechanisms were also determined. The effects of solvent dosage, reaction temperature, reaction time, and ratio of the reductant to the COOH content on the carboxyl conversion were also systematically investigated. An efficient reduction system comprising LiAlH₄ can not only achieve an efficient conversion of the COOH groups in t-CTLF to OH groups but also the in situ hydrogenation and addition reactions of residual double bonds (C=C) groups in the chain, such that the thermal stability and terminal activity of the product are improved while maintaining a high fluorine content.

Progress on Polymer Dielectrics for Electrostatic Capacitors Application

Polymer dielectrics are attracting increasing attention for electrical energy storage owing to their advantages of mechanical flexibility, corrosion resistance, facile processability, light weight, great reliability, and high operating voltages. However, the dielectric constants of most dielectric polymers are less than 10, which results in low energy densities and limits their applications in electrostatic capacitors for advanced electronics and electrical power systems. Therefore, intensive efforts have been placed on the development of high-energy-density polymer dielectrics. In this perspective, the most recent results on the all-organic polymer dielectrics are summarized, including molecular structure design, polymer blends, and layered structured polymers. The challenges in the field and suggestions for future research on high-energy-density polymer dielectrics are also presented.

Controllable synthesis and structural design of novel all-organic polymers toward high energy storage dielectrics

As the core unit of energy storage equipment, high voltage pulse capacitor plays an indispensable role in the field of electric power system and electromagnetic energy related equipment. The mostly utilized polymer materials are metallized polymer thin films, which are represented by biaxially oriented polypropylene (BOPP) films, possessing the advantages including low cost, high breakdown strength, excellent processing ability, and self-healing performance. However, the low dielectric constant (εr < 3) of traditional BOPP films makes it impossible to meet the demand for increased high energy density. Controlled/living radical polymerization (CRP) and related techniques have become a powerful approach to tailor the chemical and physical properties of materials and have given rise to great advances in tuning the properties of polymer dielectrics. Although organic-inorganic composite dielectrics have received much attention in previous studies, all-organic polymer dielectrics have been proven to be the most promising choice because of its light weight and easy large-scale continuous processing. In this short review, we begin with some basic theory of polymer dielectrics and some theoretical considerations for the rational design of dielectric polymers with high performance. In the guidance of these theoretical considerations, we review recent progress toward all-organic polymer dielectrics based on two major approaches, one is to control the polymer chain structure, containing microscopic main-chain and side-chain structures, by the method of CRP and the other is macroscopic structure design of all-organic polymer dielectric films. And various chemistry and compositions are discussed within each approach.

Recent Progress and Future Prospects on All-Organic Polymer Dielectrics for Energy Storage Capacitors

With the development of advanced electronic devices and electric power systems, polymer-based dielectric film capacitors with high energy storage capability have become particularly important. Compared with polymer nanocomposites with widespread attention, all-organic polymers are fundamental and have been proven to be more effective choices in the process of scalable, continuous, and large-scale industrial production, leading to many dielectric and energy storage applications. In the past decade, efforts have intensified in this field with great progress in newly discovered dielectric polymers, fundamental production technologies, and extension toward emerging computational strategies. This review summarizes the recent progress in the field of energy storage based on conventional as well as heat-resistant all-organic polymer materials with the focus on strategies to enhance the dielectric properties and energy storage performances. The key parameters of all-organic polymers, such as dielectric constant, dielectric loss, breakdown strength, energy density, and charge-discharge efficiency, have been thoroughly studied. In addition, the applications of computer-aided calculation including density functional theory, machine learning, and materials genome in rational design and performance prediction of polymer dielectrics are reviewed in detail. Based on a comprehensive understanding of recent developments, guidelines and prospects for the future development of all-organic polymer materials with dielectric and energy storage applications are proposed.

Activation of different C–F bonds in fluoropolymers for Cu(0)-mediated single electron transfer radical polymerization

The graft polymerization of MMA initiated from PVDF-based fluoropolymers via single electron transfer controlled radical polymerization (SET-CRP) is reported.

Re-evaluation of the Energy Density Properties of VDF Ferroelectric Thin-Film Capacitors

Large dielectric constants and small remanent polarization of the relaxor-ferroelectric (RFE) polymers are favored for energy-harvesting applications. Here, the energy harvesting of RFE thin films of vinylidene fluoride (VDF)-based terpolymers were re-evaluated. VDF-based terpolymers with trifluoroethylene (TrFE) and chlorofluoroethylene (CFE), CFE terpolymer, and those with TrFE and chlorotrifluoroethylene were used. Thermally annealed CFE terpolymer exhibited an energy density of 8.3 J cm^-3 and an energy efficiency of 82% at a field of 280 MV m^-1. The high-energy efficiency was related to the narrow bipolar hysteresis of displacement (D)-electric field (E) of the CFE terpolymer film. This narrow D-E hysteresis was a sum of the unipolar hysteresis directed toward the positive electric field region and that toward the negative electric field region, which suggested antiferroelectric-like behavior.

Ferroelectric Polymers Exhibiting Negative Longitudinal Piezoelectric Coefficient: Progress and Prospects

Piezoelectric polymers are well-recognized to hold great promise for a wide range of flexible, wearable, and biocompatible applications. Among the known piezoelectric polymers, ferroelectric polymers represented by poly(vinylidene fluoride) and its copolymer poly(vinylidene fluoride-co-trifluoroethylene) possess the best piezoelectric coefficients. However, the physical origin of negative longitudinal piezoelectric coefficients occurring in the polymers remains elusive. To address this long-standing challenge, several theoretical models proposed over the past decades, which are controversial in nature, have been revisited and reviewed. It is concluded that negative longitudinal piezoelectric coefficients arise from the negative longitudinal electrostriction in the crystalline domain of the polymers, independent of amorphous and crystalline-amorphous interfacial regions. The crystalline origin of piezoelectricity offers unprecedented opportunities to improve electromechanical properties of polymers via structural engineering, i.e., design of morphotropic phase boundaries in ferroelectric polymers.

Grafting PMMA onto P(VDF-TrFE) by CF Activation via a Cu(0) Mediated Controlled Radical Polymerization Process

In the present work, poly(methyl methacrylate) (PMMA) is successfully grafted onto poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) side chains via directly activated CF bonds using Cu(0)/2,2'-bipyridine as catalyst. The reaction mechanism and the initiating sites can be confirmed by the structure of the graft copolymer. The graft copolymerization exhibits first-order kinetics, and reaction conditions can affect the chemical composition of the graft copolymer, including reaction time, reaction temperature, solvents, the amount of catalyst, and monomer. The introduction of rigid PMMA side chains onto P(VDF-TrFE) can effectively tune the displacement-electric field hysteresis behaviors of P(VDF-TrFE) from normal ferroelectric to anti-ferroelectric, even linear-like dielectric, under high electric field, resulting in dramatically reduced energy loss while maintaining the discharged energy density. This work may provide an effective strategy to introduce functional groups into P(VDF-TrFE) copolymer via activation of CF bonds.

Polymer Matrix Nanocomposites with 1D Ceramic Nanofillers for Energy Storage Capacitor Applications

Recent developments in various technologies, such as hybrid electric vehicles and pulsed power systems, have challenged researchers to discover affordable, compact, and super-functioning electric energy storage devices. Among the existing energy storage devices, polymer nanocomposite film capacitors are a preferred choice due to their high power density, fast charge and discharge speed, high operation voltage, and long service lifetime. In the past several years, they have been extensively researched worldwide, with 0D, 1D, and 2D nanofillers being incorporated into various polymer matrixes. However, 1D nanofillers appeared to be the most effective in producing large dipole moments, which leads to a considerably enhanced dielectric permittivity and energy density of the nanocomposite. As such, this Review focuses on recent advances in polymer matrix nanocomposites using various types of 1D nanofillers, i.e., linear, ferroelectric, paraelectric, and relaxor-ferroelectric for energy storage applications. Correspondingly, the latest developments in the nanocomposite dielectrics with highly oriented, surface-coated, and surface-decorated 1D nanofillers are presented. Special attention has been paid to identifying the underlying mechanisms of maximizing dielectric displacement, increasing dielectric breakdown strength, and enhancing the energy density. This Review also presents some suggestions for future research in low-loss, high energy storage devices.

Electroactive materials with tunable response based on block copolymer self-assembly

Ferroelectric polymers represent one of the key building blocks for the preparation of flexible electronic devices. However, their lack of functionality and ability to simply tune their ferroelectric response significantly diminishes the number of fields in which they can be applied. Here we report an effective way to introduce functionality in the structure of ferroelectric polymers while preserving ferroelectricity and to further tune the ferroelectric response by incorporating functional insulating polymer chains at the chain ends of ferroelectric polymer in the form of block copolymers. The block copolymer self-assembly into lamellar nanodomains allows confined crystallization of the ferroelectric polymer without hindering the crystallinity or chain conformation. The simple adjustment of block polarity leads to a significantly different switching behavior, from ferroelectric to antiferroelectric-like and linear dielectric. Given the simplicity and wide flexibility in designing molecular structure of incorporated blocks, this approach shows the vast potential for application in numerous fields.

Tailored Self-Assembled Ferroelectric Polymer Nanostructures with Tunable Response

A facile ferroelectric nanostructures preparation method is developed based on the self-assembly of poly(2-vinylpyridine)-b-poly(vinylidene fluoride-co-trifluoroethylene)-b-poly(2-vinylpyridine) triblock copolymers (P2VP-b-P(VDF-TrFE)-b-P2VP), and the effect of morphological characteristics of the block copolymers on the ferroelectric response has been investigated for the first time. By simple adjustment of the ratio between the blocks, lamellar, cylindrical, and spherical morphologies are obtained in the melt and preserved upon crystallization of P(VDF-TrFE). However, at high P(VDF-TrFE) content, crystallization becomes dominant and drives the self-assembly of block copolymers. The crystallization study of the block copolymers reveals the preservation of the high degree of crystallinity inside the confined nanodomains as well as the reduction of the crystalline size and the Curie transition temperature with the confinement level. Only a small difference in the coercive field and the shape of the hysteresis loop is observed for block copolymers with a lamellar morphology produced either by crystallization-driven self-assembly or by confinement inside preformed lamellar domains. In contrast, delayed spontaneous polarization or the absence of dipole switching is demonstrated for the confinement of ferroelectric crystals inside both isolated cylindrical and spherical domains, exemplifying the influence of dimensionality on the critical size for ferroelectric order.

Regulating Dielectric and Ferroelectric Properties of Poly(vinylidene fluoride-trifluoroethylene) with Inner CH=CH Bonds

Poly(vinylidene fluoride) (PVDF) based ferroelectric polymers have attracted considerable attention both academically and industrially due to their tunable ferroelectric properties. By pinning the conformation of the polymer chain and the ferroelectric phase physically or chemically, the ferroelectric behaviors of PVDF based polymers could be finely turned from normal ferroelectric into relaxor ferroelectric, anti-ferroelectric like, and even linear dielectric. Besides high energy electron irradiation and chemical copolymerization with the bulky monomers, in this work, an alternative strategy is presented to regulate the dielectric and ferroelectric performances of PVDF based ferroelectric polymer for the first time. CH=CH bonds with the desired content are inserted by a controlled dehydrofluorination reaction into a poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) copolymer (TrFE refers to trifluoroethylene) synthesized from the hydrogenation of P(VDF-CTFE) (CTFE refers to chlorothrifluoroethylene). The influence of the CH=CH bonds along with the fabrication conditions on the crystallization and ferroelectric relaxation of the resultant copolymers (referred to P(VDF-TrFE-DB)) was carefully characterized and discussed. The nonrotatable CH=CH bonds result in depressed dielectric and ferroelectric performances in the as-cast films by confining the orientation of ferroelectric grains in P(VDF-TrFE). The normal ferroelectric performance of P(VDF-TrFE) is turned into anti-ferroelectric like behavior in the resultant P(VDF-TrFE-DB). The cleavage of CH=CH bonds is responsible for the recovery of the ferroelectric behavior in the annealed samples. Uniaxial stretching favors the alignment of the polymer chain and ferroelectric domains, which may address the further regulated ferroelectric characters in the stretched samples.

CuAAC click chemistry: a versatile approach towards PVDF-based block copolymers

Functionalized benzoyl peroxide-initiated polymerization of vinylidene fluoride allows straightforward preparation of PVDF-based block copolymers with an appealing crystallization behavior.

Tuning Phase Composition of Polymer Nanocomposites toward High Energy Density and High Discharge Efficiency by Nonequilibrium Processing

Polymer nanocomposite dielectrics with high energy density and low loss are major enablers for a number of applications in modern electronic and electrical industry. Conventional fabrication of nanocomposites by solution routes involves equilibrium process, which is slow and results in structural imperfections, hence high leakage current and compromised reliability of the nanocomposites. We propose and demonstrate that a nonequilibrium process, which synergistically integrates electrospinning, hot-pressing and thermal quenching, is capable of yielding nanocomposites of very high quality. In the nonequilibrium nanocomposites of poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) and BaTiO₃ nanoparticles (BTO_nps), an ultrahigh Weibull modulus β of ∼30 is achieved, which is comparable to the quality of the bench-mark biaxially oriented polypropylene (BOPP) fabricated with melt-extrusion process by much more sophisticated and expensive industrial apparatus. Favorable phase composition and small crystalline size are also induced by the nonequilibrium process, which leads to concomitant enhancement of electric displacement and breakdown strength of the nanocomposite hence a high energy density of ∼21 J/cm³. Study on the polarization behavior and phase transformation at high electric field indicates that BTO_nps could facilitate the phase transformation from α- to β-polymorph at low electric field.

Differences in electroactive terpolymers based on VDF, TrFE and 2,3,3,3-tetrafluoropropene prepared by batch solution and semi-continuous aqueous suspension polymerizations

In the search for new fluorinated electroactive copolymers, 0–8 mol% of 2,3,3,3-tetrafluoropropene (1234yf) was terpolymerized with vinylidene fluoride (VDF) and trifluoroethylene (TrFE).

Inserting –CHCH– into P(VDF-TrFE) by C–F activation mediated with Cu(0) in a controlled atom transfer radical elimination process

A controlled single electron transfer radical elimination (SET-RE) reaction has been successfully developed to introduce CHCH bonds into poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)).

Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects

Dielectric polymer nanocomposites are rapidly emerging as novel materials for a number of advanced engineering applications. In this Review, we present a comprehensive review of the use of ferroelectric polymers, especially PVDF and PVDF-based copolymers/blends as potential components in dielectric nanocomposite materials for high energy density capacitor applications. Various parameters like dielectric constant, dielectric loss, breakdown strength, energy density, and flexibility of the polymer nanocomposites have been thoroughly investigated. Fillers with different shapes have been found to cause significant variation in the physical and electrical properties. Generally, one-dimensional and two-dimensional nanofillers with large aspect ratios provide enhanced flexibility versus zero-dimensional fillers. Surface modification of nanomaterials as well as polymers adds flavor to the dielectric properties of the resulting nanocomposites. Nowadays, three-phase nanocomposites with either combination of fillers or polymer matrix help in further improving the dielectric properties as compared to two-phase nanocomposites. Recent research has been focused on altering the dielectric properties of different materials while also maintaining their superior flexibility. Flexible polymer nanocomposites are the best candidates for application in various fields. However, certain challenges still present, which can be solved only by extensive research in this field.

Understanding Nonlinear Dielectric Properties in a Biaxially Oriented Poly(vinylidene fluoride) Film at Both Low and High Electric Fields

Understanding nonlinear dielectric behavior in polar polymers is crucial to their potential application as next generation high energy density and low loss dielectrics. In this work, we studied nonlinear dielectric properties of a biaxially oriented poly(vinylidene fluoride) (BOPVDF) film under both low and high electric fields. For fundamental nonlinear dielectric constants at low fields (<30 MV/m), Novocontrol high-voltage broadband dielectric spectroscopy (HVBDS) was accurate enough to measure up to the third harmonics. It was observed that the low-field dielectric nonlinearity for the BOPVDF disappeared above 10 Hz at room temperature, suggesting that the low-field dielectric nonlinearity originated from ionic migration of impurity ions rather than dipolar relaxation of the amorphous segments. Above the coercive field (EC ≈ 70 MV/m), bipolar electric displacement-electric field (D-E) loop tests were used to extract the nonlinear behavior for pure PVDF crystals, which had a clear origin of ferroelectric switching of polar crystalline dipoles and domains and nonpolar-to-polar (α → δ → β) phase transformations. By using HVBDS, it was observed that the ferroelectric switching of polar crystalline dipoles and domains in BOPVDF above the EC always took place between 20 and 500 Hz regardless of a broad range of temperature from -30 to 100 °C. This behavior was drastically different from that of the amorphous PVDF dipoles, which had a strong dependence on frequency over orders of magnitude.

Ferroelectric relaxation dependence of poly(vinylidene fluoride-co-trifluoroethylene) on frequency and temperature after grafting with poly(methyl methacrylate)

By monitoring the D–E curves of P(VDF-TrFE-CTFE)-g-PMMAs at different frequency and temperature, the dependence of the ferroelectric relaxation of grafted copolymers onto testing conditions and composition has been finely illustrated.

Chemical composition characterization of poly(vinylidene fluoride-chlorotrifluoroethylene)-based copolymers with F–H decoupled 1H NMR

After decoupled from F in ¹H NMR, the overlapped peaks of H onto VDF connected with CTFE and VDF due to the strong coupling between H and F are finely separated, which allows their integrals to be obtained. Then the composition could be determined.

High-field antiferroelectric-like behavior in uniaxially stretched poly(vinylidene fluoride-trifluoroethylene-chlorotrifluoroethylene)-grafted-poly(methyl methacrylate) films with high energy density

The antiferroelectric-like behavior could be retained up to 675 MV m⁻¹ with a discharged energy density of 23.3 J cm⁻³ because of the confinement of rigid PMMA segment onto the ferroelectric relaxation of P(VDF-TrFE-CTFE) and the high breakdown strength.

Anti-Ferroelectric Ceramics for High Energy Density Capacitors

With an ever increasing dependence on electrical energy for powering modern equipment and electronics, research is focused on the development of efficient methods for the generation, storage and distribution of electrical power. In this regard, the development of suitable dielectric based solid-state capacitors will play a key role in revolutionizing modern day electronic and electrical devices. Among the popular dielectric materials, anti-ferroelectrics (AFE) display evidence of being a strong contender for future ceramic capacitors. AFE materials possess low dielectric loss, low coercive field, low remnant polarization, high energy density, high material efficiency, and fast discharge rates; all of these characteristics makes AFE materials a lucrative research direction. However, despite the evident advantages, there have only been limited attempts to develop this area. This article attempts to provide a focus to this area by presenting a timely review on the topic, on the relevant scientific advancements that have been made with respect to utilization and development of anti-ferroelectric materials for electric energy storage applications. The article begins with a general introduction discussing the need for high energy density capacitors, the present solutions being used to address this problem, and a brief discussion of various advantages of anti-ferroelectric materials for high energy storage applications. This is followed by a general description of anti-ferroelectricity and important anti-ferroelectric materials. The remainder of the paper is divided into two subsections, the first of which presents various physical routes for enhancing the energy storage density while the latter section describes chemical routes for enhanced storage density. This is followed by conclusions and future prospects and challenges which need to be addressed in this particular field.