Structure and Rheology of Self-Assembled Telechelic Associative Polymers in Aqueous Solution before and after Photo-Cross-Linking

pH-controlled breakup of fractal aggregates, microgels and gels formed by self-assembled amphiphilic triblock copolymers

The degradation of (micro)gels and fractal aggregates based on self-assembled amphiphilic triblock copolymers has been investigated in water by confocal microscopy and light scattering respectively. The triblock copolymer consisted of a central hydrophilic poly(acrylic acid) (pAA) block and two hydrophobic end blocks that contained an equal amount of randomly distributed n-butyl acrylate (nBA) and AA units. These latter units helped at tempering the hydrophobic end blocks resulting in the control and the fine tuning of the dynamics of the self-assembled triblock through the pH. Starting from a pH where the dynamics is frozen, the rate of breakup of the macroscopic gels, microgels and of fractal aggregates was measured after increasing the pH to different values. The mechanism of the breakup was found to be independent of the pH, but its rate increased exponentially with increasing pH. The degradation proceeded through the release of the polymers from the bulk into the surrounding aqueous phase.

Elaboration and rheological characterization of nanocomposite hydrogels containing C60 fullerene nanoplatelets

Nanocomposite hydrogels were elaborated that consisted of a physical network formed by an amphiphilic polymer in which C60 fullerene nanoplatelets were embedded. Characterization showed that the nanoplatelets within the polymer network were aggregated. The presence of these nanoplatelets led to an increase of the shear modulus of the hydrogels, that cannot be explained by a filler effect alone. The nanocomposite gels displayed similar rheological behavior, both in linear and non-linear domains, as neat hydrogels at higher polymer concentrations. We suggest that the particles reinforced the gels by forming additional connections between the polymer chains.

Effect of chain architecture on the structure, dynamics, and rheology of thermoresponsive poloxamer hydrogels and associated blends

Poloxamers, ABA triblock polymers composed of a poly(propylene oxide) (PPO) midblock (B) and poly(ethylene oxide) (PEO) endblocks (A), are widely studied for biomedical applications. Aqueous poloxamer 407 (P407; also referred to as F127) undergoes a solution-to-gel transition with increasing temperature, driven by the formation and ordering of micelles onto periodic lattices; however, the gel temperature and resulting modulus has limited tunability. Here, reverse P407 (RP407), a BAB polymer of the same composition and molar mass but the inverted architecture, is synthesized via anionic polymerization. The micellization and gelation temperatures of RP407 are higher than that of P407 and the PPO endblocks allow for intermicelle bridging; however, both single-component solutions favor body-centered cubic (BCC) packings. Further, aqueous RP407 displays a "soft gel" region with interesting rheological behavior, including viscoelastic aging and thermal hysteresis. Combining P407 and RP407 yields solutions with intermediate transition temperatures and alters the size and micelle packing. While the single-component solutions produce BCC packings, the blends form close-packed structures and larger micelles of higher aggregation numbers. Blends of P407 with an analogous AB diblock (E111P32) display similar behavior, whereas RP407/diblock blends form intermediate-sized BCC-packed micelles. These differences in packing and aggregation alter the local environments within the gels, which could have implications for applications such as drug delivery and protein stabilization.

Poly(ethylene oxide)/Gelatin-Based Biphasic Photocrosslinkable Hydrogels of Tunable Morphology for Hepatic Progenitor Cell Encapsulation

Macroporous hydrogels have great potential for biomedical applications. Liquid or gel-like pores were created in a photopolymerizable hydrogel by forming water-in-water emulsions upon mixing aqueous solutions of gelatin and a poly(ethylene oxide) (PEO)-based triblock copolymer. The copolymer constituted the continuous matrix, which dominated the mechanical properties of the hydrogel once photopolymerized. The gelatin constituted the dispersed phase, which created macropores in the hydrogel. The microstructures of the porous hydrogel were determined by the volume fraction of the gelatin phase. When volume fractions were close to 50 v%, free-standing hydrogels with interpenetrated morphology can be obtained thanks to the addition of a small amount of xanthan. The hydrogels displayed Young's moduli ranging from 5 to 30 kPa. They have been found to be non-swellable and non-degradable in physiological conditions. Preliminary viability tests with hepatic progenitor cells embedded in monophasic PEO-based hydrogels showed rapid mortality of the cells, whereas encouraging viability was observed in PEO-based triblock copolymer/gelatin macroporous hydrogels. The latter has the potential to be used in cell therapy.

Telechelic amphiphilic metallopolymers end-functionalized with platinum(ii) complexes: synthesis, luminescence enhancement, and their self-assembly into flowerlike vesicles and giant flowerlike vesicles

Telechelic amphiphilic metallopolymers can self-assemble in solution to create nanosized flowerlike vesicles, where the two platinum(ii) complex ends are connected to the same vesicular core and the central PEG chains form loops as a corona.

Photo-Cross-Linked Self-Assembled Poly(ethylene oxide)-Based Hydrogels Containing Hybrid Junctions with Dynamic and Permanent Cross-Links

Homogeneous hydrogels were formed by self-assembly of triblock copolymers via association of small hydrophobic end blocks into micelles bridged by large poly(ethylene oxide) central blocks. A fraction of the end blocks were photo-cross-linkable and could be rapidly cross-linked covalently by in situ UV irradiation. In this manner networks were formed with well-defined chain lengths between homogeneously distributed hybrid micelles that contained both permanent and dynamically cross-linked end blocks. Linear rheology showed a single relaxation mode before in situ irradiation intermediate between those of the individual networks. The presence of transient cross-links decreased the percolation threshold of the network rendered permanent by irradiation and caused a strong increase of the elastic modulus at lower polymer concentrations. Large amplitude oscillation and tensile tests showed significant increase of the fracture strain caused by the dynamic cross-links.

Photocurable ABA triblock copolymer-based ion gels utilizing photodimerization of coumarin

Herein, we develop a photocurable ABA triblock copolymer-based ion gel, which can be converted from a thermally processable, physically crosslinked ion gel to a thermally and mechanically stable, chemically crosslinked ion gel via photoinduced dimerization. The A block consists of a random copolymer of N-isopropylacrylamide and a coumarin-containing acrylate monomer, while the B block consists of an ionic liquid-philic poly(ethylene oxide). Due to the upper critical solution temperature-type phase behavior of the A block, the ABA triblock copolymer undergoes gel-to-sol transitions in a hydrophobic ionic liquid as the temperature is increased. Furthermore, under ultraviolet (UV) light irradiation, the physical crosslinks formed by association of the A blocks in the gel at low temperatures become chemically crosslinked as a result of photodimerization of the coumarin moieties in the A block; this results in conversion from a thermo-reversible, physically crosslinked ion gel to a thermo-irreversible, chemically crosslinked ion gel. The rheological changes of the ion gel upon UV irradiation have been investigated in detail. In addition, photopatterning of the ion gel has been realized by exploiting the photocurable behavior of the ABA triblock copolymer in the ionic liquid.

Photoinduced dimerization of coumarin was utilized to develop a photocurable ABA triblock copolymer-based ion gel.

Ferrocene-Functionalized Hydrophobically Modified Ethoxylated Urethane: Redox-Responsive Controlled Self-Assembly and Rheological Behavior in Aqueous Solution

In this work, we present a novel redox-responsive ferrocene-functionalized hydrophobically modified ethoxylated urethane (Fc-HEUR) model polymer. The effects of a redox-induced hydrophobicity change of ferrocenyl hydrophobes on the self-assembly and rheological properties of Fc-HEUR in aqueous solution were investigated. In view of the redox-induced change in the hydrophilic-lipophilic balance of polymers, the Fc-HEUR polymer in aqueous solution can reversibly self-assemble into spherical micelles and larger micellar aggregates of different nanoscales and also disassemble by redox reactions immediately. Moreover, we have demonstrated that a rearrangement of micellar junctions takes place through a bridge-loop or loop-bridge transition in the concentrated polymer solution followed by redox reactions, which induces a great change in the rheological properties of the polymer solution: a viscoelastic liquid for the reduction state Fc-HEUR and a viscous liquid for the oxidation state Fc⁺-HEUR, owing to their different relaxation behaviors. Particularly, the associative structures and rheological properties of the Fc-HEUR aqueous solution can be reversibly controlled by redox reactions. This work will be useful not only for understanding of the thickening mechanism of stimuli-responsive HEURs but also for the development of reversible self-assembly and controlled rheological fluids, which may have some special application in drug delivery systems, catalyst supports, sensors, and microfluidic devices.

Supramolecular polymer networks: hydrogels and bulk materials

Supramolecular polymer networks are materials crosslinked by reversible supramolecular interactions, such as hydrogen bonding or electrostatic interactions. Supramolecular materials show very interesting and useful properties resulting from their dynamic nature, such as self-healing, stimuli-responsiveness and adaptability. Here we will discuss recent progress in polymer-based supramolecular networks for the formation of hydrogels and bulk materials.

Synthesis, self-assembly, and pH-responsive behavior of (photo-crosslinked) star amphiphilic triblock copolymer

Conventional polymeric micelles employed as drug carriers suffer from the drawback of disaggregation when diluted into body fluids, giving rise to premature release of drugs. In this work, cinnamate was chosen as a crosslinker to overcome this issue and regulate pH response. A series of photo-crosslinkable star amphiphilic triblock copolymers, star poly(ε-caprolactone)-b-poly(2-cinnamoyloxyethyl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate) (SPCL-b-PCEMA-b-PDMAEMA), were prepared by combination of stepwise reversible addition-fragment chain transfer (RAFT) polymerization and carbodiimide-mediated coupling reaction. These star amphiphilic copolymers could self-assemble into core-shell-corona micelles. Facile photo crosslinking of the micelles was carried out via UV irradiation. The crosslinked micelles showed an improved stability determined by critical micelle concentration (CMC). The degree of photo crosslinking was easily regulated by tuning UV irradiation time, and the hydrodynamic diameters (D(h)) decreased with increasing degree of photo crosslinking. The pH responses of micelles were investigated by dynamic light scattering (DLS), indicating pH-induced swelling-shrinking behavior. For photo-crosslinked micelle, its capability of swelling-shrinking weakened with increasing crosslinking degree, suggesting that pH response was controlled by crosslinking density. This novel photo-crosslinked micelle system with adjustable pH response was expected to have potential as drug carriers for controlled release.