Study of Phase Separation of Poly(vinyl methyl ether) Aqueous Solutions with Rayleigh Scattering Technique

Programed Thermoresponsive Polymers with Cleavage-Induced Phase Transition

A new programed upper critical solution temperature-type thermoresponsive polymer was developed using water-soluble anionic polymer conjugates derived from polyallylamine and phthalic acid with cleavage-induced phase transition property. Intrinsic charge inversion from anion to cation of the polymer side chain is induced through a side chain cleavage reaction in acidic aqueous media. With the progress of side chain cleavage under fixed external conditions, the polymer conjugates express a thermoresponsive property, followed by shifting a phase boundary due to the change in polymer composition. When the phase transition boundary eventually reached the examined temperature, phase transition occurs under fixed external conditions. Such new insight obtained in this study opens up the new concept of time-programed stimuli-responsive polymer possessing a cleavage-induced phase transition.

Problems with Applying the Ozawa–Avrami Crystallization Model to Non-Isothermal Crosslinking Polymerization

Ozawa has modified the Avrami model to treat non-isothermal crystallization kinetics. The resulting Ozawa–Avrami model yields the Avrami index (n) and heating/cooling function (χ(T)). There has been a number of recent applications of the Ozawa–Avrami model to non-isothermal crosslinking polymerization (curing) kinetics that have determined n and have used χ(T) in place of the rate constant (k(T)) in the Arrhenius equation to evaluate the activation energy (E) and the preexponential factor (A). We analyze this approach mathematically as well as by using simulated and experimental data, highlighting the following problems. First, the approach is limited to the processes that obey the Avrami model. In cases of autocatalytic or decelerating kinetics, commonly encountered in crosslinking polymerizations, n reveals a systematic dependence on temperature. Second, χ(T) has a more complex temperature dependence than k(T) and thus cannot produce exact values of E and A via the Arrhenius equation. The respective deviations can reach tens or even hundreds of percent but are diminished dramatically using the heating/cooling function in the form [χ(T)]1/n. Third, without this transformation, the Arrhenius plots may demonstrate breakpoints that leads to questionable interpretations. Overall, the application of the Ozawa–Avrami model to crosslinking polymerizations appears too problematic to be justified, especially considering the existence of well-known alternative kinetic techniques that are flexible, accurate, and computationally simple.

First events in the coil-to-globule transition of PVME in water: An ultrafast temperature jump - time-resolved elastic light scattering study

HYPOTHESIS

The coil-to-globule transition is an essential phenomenon in protein and polymer solutions. Late stages of such transitions, >1 µs, have been thoroughly studied. Yet, the initial ones are a matter of speculations. Here, we present the first observation of a sub-nanosecond stage of the coil-to-globule transition of poly (vinyl methyl ether), PVME, in water.

EXPERIMENTS

The detection of an early stage of the coil-to-globule transition has been possible thanks to a novel experimental approach - time-resolved elastic light scattering study, following an ultrafast temperature jump. We identified a molecular process active in the observed stage of the transition with use of broadband dielectric spectroscopy.

FINDINGS

In the experiment's time window, from a few ps to around 600 ps, we observed an increase in the light scattering intensity 300-400 ps after the temperature jump that heated the sample above its lower critical solution temperature (LCST). The observed time coincides with the time of segmental relaxation of PVME, determined by broadband dielectric spectroscopy in the temperature range of the LCST of the PVME/water mixture. This coincidence strongly suggests that the observed herein stage of coil-to-globule transition is the rapid formation of local nuclei along the polymer chain. Those nuclei may grow and aggregate in later stages of the process, which are out of our experimental time window.

Crystallization and Temperature Driven Morphological Evolution of Bio-based Polyethylene Glycol-acrylic Rosin Polymer

In this work, the morphological and conformational evolution of bio-based polyethylene glycol (PEG)-acrylic rosin polymer in water was studied by scanning electron microscopy (SEM), polarized optical microscopy (POM), differential scanning calorimetry (DSC), X-ray diffraction (XRD), Rayleigh light scattering (RLS) and dynamic light scattering (DLS) techniques during a heating and cooling cycle. When the concentration was higher than the critical micelle concentration (CMC), a reversible transformation process, i.e. from micelle to irregular lamella aggregations, was detected. As the concentration was equal to or below the CMC, individual unimers aggregated into needle-shaped crystals composed of acrylic rosin crystalline core in the heating run. The crystallization of acrylic rosin blocks acted as seeds and thus, in the subsequent cooling process, the PEG corona crystallized into the cube-shaped crystals. The cytotoxicity assay showed the biocompatibility of bio-based polyethylene glycol-acrylic rosin polymer. This has great potential in the application of drug delivery and release triggered by temperature.

What will happen when thermoresponsive poly(N-isopropylacrylamide) is tethered on poly(ionic liquid)s?

The thermoresponsive ionic liquid diblock copolymer of poly[1-(4-vinylbenzyl)-3-methylimidazolium tetrafluoroborate]-block-poly(N-isopropylacrylamide) (P[VBMI][BF₄]-b-PNIPAM) containing a hydrophilic poly(ionic liquid) block of P[VBMI][BF₄] is prepared by sequential reversible addition-fragmentation chain transfer (RAFT) polymerization. This P[VBMI][BF₄]-b-PNIPAM exhibits an abnormal thermoresponsive phase transition at a temperature above the phase transition temperature (PTT) of the PNIPAM block. For P[VBMI][BF₄]-b-PNIPAM including a short P[VBMI][BF₄] block, its aqueous solution becomes turbid at a temperature above the PTT of the thermoresponsive PNIPAM block, whereas for P[VBMI][BF₄]-b-PNIPAM containing a relatively long P[VBMI][BF₄] block even in the case of a relatively long PNIPAM block, the aqueous solution remains transparent at a temperature far above the PTT of the PNIPAM block, although a soluble-to-insoluble phase transition of the PINIPAM block is confirmed by dynamic light scattering (DLS) analysis and variable temperature ¹H NMR analysis. The reason that P[VBMI][BF₄]-b-PNIPAM exhibits an abnormal thermoresponse is discussed and ascribed to the highly hydrophilic and charged poly(ionic liquid) block of P[VBMI][BF₄] leading to the formation of small-sized micelles at a temperature above the PTT.

Phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-maleic anhydride) in the presence of hollow silica nanotubes

The phase separation behavior of poly(methyl methacrylate) (PMMA)/poly(styrene-co-maleic anhydride) (SMA) blends with and without one-dimensional hollow silica nanotubes (HSNTs) was investigated using time-resolved small-angle laser light scattering. During isothermal annealing over a range of 100 °C above the glass transition temperature, the Arrhenius equation is applicable to describe the temperature dependence of phase separation behavior at the early and late stages of spinodal decomposition (SD) for unfilled and filled PMMA/SMA systems. The mechanical barrier effect of HSNTs on the macromolecular chain diffusion of the blend matrix may retard the concentration fluctuation at the early stage and slow down the domain coarsening at the late stage of SD phase separation for the blend matrix to result in the decrease of apparent diffusion coefficient D app, the postponement of the relaxation time and the decline of temperature sensitivity for the phase separation rate.

Synthesis, surface properties and temperature dependence of phase separation of DSPE chains in ethanol solutions

The surface properties, phase separation processes and kinetics of a DSPE/ethanol solution were investigated.

Thermo- and pH-Responsive, Coacervate-Forming Hyperbranched Poly(β-amino ester)s for Selective Cell Binding

We report a new type of thermo- and pH-responsive, coacervate-forming highly degradable polymer-hyperbranched poly(β-amino esters) (HPAEs) and its selective cell binding behaviors. The HPAEs were synthesized from 5-amino-1-pentanol (S5) and trimethylolpropane ethoxylate triacrylate (TMPETA) via an A2+B3 type Michael addition. The existence of multiple hydrogen bond pairs as well as tertiary amines makes the S5-TMPETA polymers manifest temperature- and pH-dependent phase transition. By varying the length of the ethylene glycol (EG) spacers in the TMPETA, polymer molecular weight, concentration, and pH value, the phase transition of the S5-TMPETA can be easily tuned in aqueous and buffer solutions, as evidenced by UV-vis spectroscopy and DLS measurements. Especially, the S5-TMPETA prepared from S5 and trimethylolpropane ethoxylate triacrylate 692 (S5-TMPETA692) shows a lower critical solution temperature (LCST) around 33 °C, above which the S5-TMPTEA can form coacervate particles able to encapsulate functional molecules effectively. Importantly, when incubation with HeLa cells, the S5-TMPTETA692 exhibits a temperature- and pH-responsive selective cell binding behaviors. In addition, the S5-TMPETA are highly hydrolyzable and elicit negligible cytotoxicity. This new type of "smart" polymer should find use in a variety of biomedical applications.

Volume phase transition of electron beam cross-linked thermo-responsive PVME nanogels in the presence and absence of nanoparticles: with a view toward rheology and interactions

We investigate the effect of nanoparticles and radiation dose on interactions in the PVME-based nanogel system and its phase behavior (swelling/deswelling behavior and phase separation mechanism) by rheological and FTIR measurements.

New directions in thermoresponsive polymers

Interest in thermoresponsive polymers has steadily grown over many decades, and a great deal of work has been dedicated to developing temperature sensitive macromolecules that can be crafted into new smart materials. However, the overwhelming majority of previously reported temperature-responsive polymers are based on poly(N-isopropylacrylamide) (PNIPAM), despite the fact that a wide range of other thermoresponsive polymers have demonstrated similar promise for the preparation of adaptive materials. Herein, we aim to highlight recent results that involve thermoresponsive systems that have not yet been as fully considered. Many of these (co)polymers represent clear opportunities for advancements in emerging biomedical and materials fields due to their increased biocompatibility and tuneable response. By highlighting recent examples of newly developed thermoresponsive polymer systems, we hope to promote the development of new generations of smart materials.

Determination of dopamine at the nanogram level based on the formation of Prussian blue nanoparticles by resonance Rayleigh scattering technique

In pH 2.6 HCl solution, dopamine (DA) could reduce Fe(III) to Fe(II), which further reacted with [Fe(CN)(6)](3-) to form a Fe(3)[Fe(CN)(6)](2) complex. By virtue of hydrophobic force and Van der Waals force, the complex aggregated to form Fe(3)[Fe(CN)(6)](2) nanoparticles with the average diameter of about 20 nm. This resulted in a significant enhancement of resonance Rayleigh scattering (RRS). The maximum wavelength of the ion-association complex was located at about 350 nm. The increment of scattering intensity (ΔI(RRS)) was directly proportional to the concentration of DA in the range of 0.06-1.0 μg/mL. This method has high sensitivity and the detection limit (3σ) for DA was 3.43 ng/mL. In this work, the characteristics of absorption and RRS spectra of this reaction have been studied. The optimum reaction condition and influencing factors have been investigated. The method was applied to the determination of DA in pharmaceutical samples with satisfactory results. Furthermore, the reaction mechanism and the reasons of RRS enhancement have been explored.

Temperature-sensitive phase transition of dendritic polyethylene amphiphiles with core-shell architecture revealed by a Rayleigh scattering technique

The phase-transition behavior of unimolecular dendritic polyethylene amphiphiles with core-shell architecture aqueous solutions was investigated by a Rayleigh scattering (RS) technique. Dendritic polyethylene (DPE)-poly(oligo(ethylenegylcol) methacrylate) (POEGMA) with a DPE hydrophobic core and a POEGMA hydrophilic shell was synthesized by the atom-transfer radical polymerization (ATRP) of OEGMA using DPE terminated by the bromine group as a macroinitiator. The fluorescence measurements implied that DPE-POEGMA molecules in aqueous solutions existed as the unimolecular micelles. To understand the phase-transition behavior of dendritic polyethylene amphiphilic unimolecular micelles in aqueous solutions, the temperature dependence of the RS spectra of DPE-POEGMA aqueous solutions under the heating-and-cooling cycle indicated that the heating and cooling processes were reversible but hysteresis existed. The phase transition of DPE-POEGMA aqueous solutions decelerated with increasing levels of PEGylation. DPE-POEGMA exhibited a lower phase-transition temperature in D(2)O than in water.