Thiol-Functionalized Block Copolymer Vesicles

Histidine-Functionalized Diblock Copolymer Nanoparticles Exhibit Enhanced Adsorption onto Planar Stainless Steel

RAFT aqueous emulsion polymerization of isopropylideneglycerol monomethacrylate (IPGMA) is used to prepare a series of PGEO5MA46 -PIPGMAy nanoparticles, where PGEO5MA is a hydrophilic methacrylic steric stabilizer block bearing pendent cis-diol groups. TEM studies confirm a spherical morphology while dynamic light scattering (DLS) analysis indicated that the z-average particle diameter can be adjusted by varying the target degree of polymerization for the core-forming PIPGMA block. Periodate oxidation is used to convert the cis-diol groups on PGEO5MA46 -PIPGMA500 and PGEO5MA46 -PIPGMA1000 nanoparticles into the analogous aldehyde-functionalized nanoparticles, which are then reacted with histidine via reductive amination. In each case, the extent of functionalization is more than 99% as determined by 1 H NMR spectroscopy. Aqueous electrophoresis studies indicate that such derivatization converts initially neutral nanoparticles into zwitterionic nanoparticles with an isoelectric point at pH 7. DLS studies confirm that such histidine-derivatized nanoparticles remain colloidally stable over a wide pH range. A quartz crystal microbalance is employed at 25°C to assess the adsorption of both the cis-diol- and histidine-functionalized nanoparticles onto planar stainless steel at pH 6. The histidine-bearing nanoparticles adsorb much more strongly than their cis-diol counterparts. For the highest adsorbed amount of 70.5 mg m-2 , SEM indicates a fractional surface coverage of 0.23 for the adsorbed nanoparticles.

Polymerization-Induced Self-Assembly for Efficient Fabrication of Biomedical Nanoplatforms

Amphiphilic copolymers can self-assemble into nano-objects in aqueous solution. However, the self-assembly process is usually performed in a diluted solution (<1 wt%), which greatly limits scale-up production and further biomedical applications. With recent development of controlled polymerization techniques, polymerization-induced self-assembly (PISA) has emerged as an efficient approach for facile fabrication of nano-sized structures with a high concentration as high as 50 wt%. In this review, after the introduction, various polymerization method-mediated PISAs that include nitroxide-mediated polymerization-mediated PISA (NMP-PISA), reversible addition-fragmentation chain transfer polymerization-mediated PISA (RAFT-PISA), atom transfer radical polymerization-mediated PISA (ATRP-PISA), and ring-opening polymerization-mediated PISA (ROP-PISA) are discussed carefully. Afterward, recent biomedical applications of PISA are illustrated from the following aspects, i.e., bioimaging, disease treatment, biocatalysis, and antimicrobial. In the end, current achievements and future perspectives of PISA are given. It is envisioned that PISA strategy can bring great chance for future design and construction of functional nano-vehicles.

Synthesis and derivatization of epoxy-functional sterically-stabilized diblock copolymer spheres in non-polar media: does the spatial location of the epoxy groups matter?

Epoxy-functional sterically-stabilized diblock copolymer nanoparticles are prepared via PISA in mineral oil and then derivatized using various reagents and reaction conditions.

Aldehyde-Functional Diblock Copolymer Nano-objects via RAFT Aqueous Dispersion Polymerization

We report the rational design of aldehyde-functional sterically stabilized diblock copolymer nano-objects in aqueous solution via polymerization-induced self-assembly. More specifically, reversible addition-fragmentation chain transfer aqueous dispersion polymerization of 2-hydroxypropyl methacrylate is conducted using a water-soluble precursor block in which every methacrylic repeat unit contains a pendent oligo(ethylene glycol) side chain capped with a cis-diol unit. Systematic variation of the reaction conditions enables the construction of a pseudo-phase diagram, which ensures the reproducible targeting of pure spheres, worms, or vesicles. Selective oxidation of the pendent cis-diol groups using aqueous sodium periodate under mild conditions introduces geminal diols (i.e., the hydrated form of an aldehyde obtained in the presence of water) into the steric stabilizer chains without loss of colloidal stability. In the case of diblock copolymer vesicles, such derivatization leads to the formation of a worm population, indicating partial loss of the original morphology. However, this problem can be circumvented by cross-linking the membrane-forming block prior to periodate oxidation. Moreover, such covalently stabilized aldehyde-functionalized vesicles can be subsequently reacted with either glycine or histidine in aqueous solution, followed by reductive amination to prevent hydrolysis of the labile imine bond. ζ potential measurements confirm that this derivatization significantly affects the electrophoretic behavior of these vesicles. Similarly, the membrane-crosslinked aldehyde-functionalized vesicles can be reacted with a model globular protein, bovine serum albumin, to produce "stealthy" protein-decorated vesicles.

Core-functionalized nanoaggregates: preparation via polymerization-induced self-assembly and their applications

Core-functionalized nanoaggregates can be prepared by a combination of polymerization-induced self-assembly (PISA) and post-polymerization modification.

Photoactive rose bengal-based latex via RAFT emulsion polymerization-induced self-assembly

Rose bengal shell- or core-functionalized acrylic latex synthesized by RAFT emulsion PISA: interfacial photosensitized ¹O₂ production under visible light.

Modular Approach to the Functionalization of Polymersomes

Functionalizing polymersomes remains a challenge due to the limitation in reaction conditions applicable to the chemistry on the surface, hindering their application for selective targeting. In order to overcome this limitation, functionalization can be introduced right before the self-assembly. Here, we have synthesized a library (32 examples) of PEG-b-PS and PEG-b-PDLLA with various functional groups derived from the amine-functionalized polymers, leading to functionally active polymersomes. We show that polymersome formation is possible via the general method with all functionalized groups and that these handles are present on the surface and are able to undergo reactions. Additionally, this methodology provides a general synthetic tool to tailor the functional group of the polymersome right before self-assembly, without limitation on the reaction conditions.

Antimicrobial polylysine decorated nano-structures prepared through polymerization induced self-assembly (PISA)

Polylysine decorated diblock copolymer nano-objects are prepared by polymerization-induced self-assemblyviaRAFT dispersion polymerization of 2-hydroxypropyl methacrylate. Antimicrobial properties of the resulting nano-objects evaluated using a gram positive bacteria.

Electrosprayed cysteine-functionalized degradable amphiphilic block copolymer microparticles for low pH-triggered drug delivery

Fluorescent dye encapsulation and release using mucoadhesive degradable thiol-functionalized amphiphilic block copolymer microparticles prepared by electrospraying.

Molecular bionics - engineering biomaterials at the molecular level using biological principles

Life and biological units are the result of the supramolecular arrangement of many different types of molecules, all of them combined with exquisite precision to achieve specific functions. Taking inspiration from the design principles of nature allows engineering more efficient and compatible biomaterials. Indeed, bionic (from bion-, unit of life and -ic, like) materials have gained increasing attention in the last decades due to their ability to mimic some of the characteristics of nature systems, such as dynamism, selectivity, or signalling. However, there are still many challenges when it comes to their interaction with the human body, which hinder their further clinical development. Here we review some of the recent progress in the field of molecular bionics with the final aim of providing with design rules to ensure their stability in biological media as well as to engineer novel functionalities which enable navigating the human body.

Single-Domain Antibody-Functionalized pH-Responsive Amphiphilic Block Copolymer Nanoparticles for Epidermal Growth Factor Receptor Targeted Cancer Therapy

Biocompatible antibody-nanoparticle conjugates have attracted interest as anticancer agents due to their potential to selectively target therapeutic agents at disease sites. However, new formulation and conjugation approaches are urgently needed to improve their uniformity for clinical applications. Here, a pH-responsive benzaldehyde-functionalized poly[oligo(ethylene glycol) methacrylate-st-para-formyl phenyl methacrylate]-b-poly[2-(diisopropyl)aminoethyl methacrylate] [P(OEGMA-st-pFPMA)-b-PDPA] block copolymer, prepared by reversible addition-fragmentation chain transfer polymerization, produced PEGylated nanoparticles (pH ∼ 7.4) by a single emulsion-solvent evaporation formulation approach. Efficient site-specific attachment of an aminooxy-functionalized anti-EGFR single-domain antibody (sdAb) on these benzaldehyde-decorated nanoparticles is achieved by oxime bond formation. These nanoconjugates can specifically bind EGFR (modified ELISA) and have enhanced uptake over nonfunctionalized controls in EGFR-positive HeLa cells. Encapsulation of rhodamine 6G dye and its dispersion upon cellular uptake, consistent with nanoparticle stability loss at pH < 5.7, prove their ability to facilitate triggered release in endosomal compartments and highlight their potential for use as next-generation antibody-drug nanoconjugates for therapeutic drug delivery.

Elucidating the Influences of Size, Surface Chemistry, and Dynamic Flow on Cellular Association of Nanoparticles Made by Polymerization-Induced Self-Assembly

The size and surface chemistry of nanoparticles dictate their interactions with biological systems. However, it remains unclear how these key physicochemical properties affect the cellular association of nanoparticles under dynamic flow conditions encountered in human vascular networks. Here, the facile synthesis of novel fluorescent nanoparticles with tunable sizes and surface chemistries and their association with primary human umbilical vein endothelial cells (HUVECs) is reported. First, a one-pot polymerization-induced self-assembly (PISA) methodology is developed to covalently incorporate a commercially available fluorescent dye into the nanoparticle core and tune nanoparticle size and surface chemistry. To characterize cellular association under flow, HUVECs are cultured onto the surface of a synthetic microvascular network embedded in a microfluidic device (SynVivo, INC). Interestingly, increasing the size of carboxylic acid-functionalized nanoparticles leads to higher cellular association under static conditions but lower cellular association under flow conditions, whereas increasing the size of tertiary amine-decorated nanoparticles results in a higher level of cellular association, under both static and flow conditions. These findings provide new insights into the interactions between polymeric nanomaterials and endothelial cells. Altogether, this work establishes innovative methods for the facile synthesis and biological characterization of polymeric nanomaterials for various potential applications.

Poly(Pentafluorophenyl Methacrylate)-Based Nano-Objects Developed by Photo-PISA as Scaffolds for Post-Polymerization Functionalization

The preparation of a functional fluorine-containing block copolymer using reversible addition-fragmentation chain-transfer dispersion polymerization in DMSO as a "platform/scaffold" is explored. The nanostructures, comprised of poly(ethyleneglycol)-b-poly(pentafluorophenyl methacrylate) or PEG-b-P(PFMA), are formulated via photo-initiated polymerization-induced self-assembly (PISA) followed by post-polymerization modification using different primary amines. A combination of light scattering and microscopy techniques are used to characterize the resulting morphologies. It is found that upon varying the degree of polymerization of the core-forming block of PFMA, only uniform spheres (with textured surfaces) are obtained. These nanostructures are subsequently modified by cross-linking using a non-responsive and a redox-responsive diamine, thus imparting stability to the particles in water. In response to intracellular glutathione (GSH) concentration, destabilization of the micelles occurs as evidenced by dynamic light scattering. The well-defined size, inherent reactivity of the nanoparticles toward nucleophiles, and GSH-responsiveness of the nanospheres make them ideal scaffolds for drug delivery to intracellular compartments with reductive environments.

Biodegradable inorganic-organic hybrids of methacrylate star polymers for bone regeneration

Hybrids that are molecular scale co-networks of organic and inorganic components are promising biomaterials, improving the brittleness of bioactive glass and the strength of polymers. Methacrylate polymers have high potential as the organic source for hybrids since they can be produced, through controlled polymerization, with sophisticated polymer architectures that can bond to silicate networks. Previous studies showed the mechanical properties of hybrids can be modified by polymer architecture and molar mass (MM). However, biodegradability is critical if hybrids are to be used as tissue engineering scaffolds, since the templates must be remodelled by host tissue. Degradation by-products have to either completely biodegrade or be excreted by the kidneys. Enzyme, or bio-degradation is preferred to hydrolysis by water uptake as it is expected to give a more controlled degradation rate. Here, branched and star shaped poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (poly(MMA-co-TMSPMA)) were synthesized with disulphide based dimethacrylate (DSDMA) as a biodegradable branching agent. Biodegradability was confirmed by exposing the copolymers to glutathione, a tripeptide which is known to cleave disulphide bonds. Cleaved parts of the star polymer from the hybrid system were detected after 2weeks of immersion in glutathione solution, and MM was under threshold of kidney filtration. The presence of the branching agent did not reduce the mechanical properties of the hybrids and bone progenitor cells attached on the hybrids in vitro. Incorporation of the DSDMA branching agent has opened more possibilities to design biodegradable methacrylate polymer based hybrids for regenerative medicine.

STATEMENT OF SIGNIFICANCE

Bioactive glasses can regenerate bone but are brittle. Hybrids can overcome this problem as intimate interactions between glass and polymer creates synergetic properties. Implants have previously been made with synthetic polymers that degrade by water, however, they degrade catastrophically, causing rapid loss of strength. Polymers that degrade by biological agents may degrade at a more controlled rate, which should give time for tissue repair and transfer of load. Previously, hybrids made with star shaped poly(methyl methacrylate-co-3-(trimethoxysilyl)propyl methacrylate) (p(MMA-co-TMSPMA)) showed enhanced properties. However, methacrylates are not bio-degradable. Here, star shaped p(MMA-co-TMSPMA) was synthesized with a core that can be cleaved by glutathione, a tripeptide. On exposure to glutathione, the hybrid degraded, producing products with molecular weights below the kidney filtration threshold.

Self-assembly of poly(lauryl methacrylate)-b-poly(benzyl methacrylate) nano-objects synthesised by ATRP and their temperature-responsive dispersion properties

Self-assembling poly(lauryl methacrylate)-b-poly(benzyl methacrylate) (PLMA_x-PBzMA_y) diblock copolymers were synthesised for the first time using solution atom transfer radical polymerisation (ATRP). The PLMA degree of polymerisation (x) was fixed at 14 and the PBzMA degree of polymerisation (y) was varied from 34 to 74. Post-polymerisation transfer of this new series of diblock copolymers from chloroform into n-dodecane (a poor solvent for PBzMA) resulted in self-assembly of polymeric nano-objects. The morphologies for the latter (spheres, worms and vesicles) were controlled by y. The observed morphologies generally agreed with those reported for related PLMA_x-PBzMA_y diblock copolymers (x ≥ 16) prepared by polymerisation induced self-assembly (PISA) via reversible addition-fragmentation chain transfer (RAFT) polymerisation (Fielding et al., J. Am. Chem. Soc., 2014, 136, 5790). However, a number of differences were observed such as de-gelation behaviour and the phase boundary positions compared to those expected from Fielding et al. Variable-temperature dynamic light scattering studies for the PLMA₁₄-PBzMA₃₄ spheres revealed that the aggregation number was unaffected by a temperature increase over the range of 20-90 °C, which differed markedly from the behaviour observed for PLMA₁₄-PBzMA₆₄ worms. This difference is a new observation with mechanistic importance for the worm-to-sphere breakdown mechanism. We show that concentrated PLMA₁₄-PBzMA_y dispersions (20% w/w) in n-dodecane can be prepared using post-polymerisation transfer. The dispersion with a mixed spherical and worm-like copolymer phase exhibited reversible de-gelation when heated. Surprisingly, the dispersions containing only the worm phase remained as gels (which were white) at temperatures up to 90 °C. Our new ATRP approach for preparing temperature-responsive non-aqueous nano-object dispersions presented here decoupled chain growth and self-assembly and will apply to other copolymer dispersions.

Thermoresponsive gels directly obtained via visible light-mediated polymerization-induced self-assembly with oxygen tolerance

A thermoresponsive reversible hydrogel is developed by PET-RAFT mediated PISA in aqueous solution at room temperature without deoxygenation.

Visible Light-Mediated Polymerization-Induced Self-Assembly in the Absence of External Catalyst or Initiator

We report the use of visible light to mediate a RAFT dispersion polymerization in the absence of external catalyst or initiator to yield nanoparticles of different morphologies according to a polymerization-induced self-assembly (PISA) mechanism. A POEGMA macro-chain transfer agent (macro-CTA) derived from a 4-cyano-4-((dodecylsulfanylthiocarbonyl)sulfanyl)pentanoic acid (CDTPA) RAFT agent can be activated under blue (460 nm, 0.7 mW/cm²) or green (530 nm, 0.7 mW/cm²) light and act simultaneously as a radical initiator, chain transfer agent, and particle stabilizer under ethanolic dispersion conditions. In particular, the formation of worm-like micelles was readily monitored by the increase of reaction viscosity during the polymerization; this method was shown to be particularly robust to different reaction parameters such as macro-CTAs of varying molecular weight. Interestingly, at high monomer conversion, different morphologies were formed depending on the wavelength of light employed, which may be due to differing degrees of polymerization control. Finally, the in situ encapsulation of the model hydrophobic drug, Nile Red, was demonstrated, suggesting applications of this facile process for the synthesis of nanoparticles for drug delivery applications.

Promotion of morphology transition of di-block copolymer nano-objects via RAFT dispersion copolymerization

Promotion of morphology transition of di-block copolymer nano-objects was achieved via RAFT dispersion copolymerization because of the enhancement of the mobility of the solvophobic block.

Asymmetrical vesicles: convenient in situ RAFT synthesis and controllable structure determination

Asymmetrical vesicles of a block copolymer were prepared, and the vesicle structure was found to be dependent on the degree of polymerization of solvophilic blocks.

Programmable self-assembly of a cystamine-block copolymer in response to pH and progressive reduction–ionization–oxidation

A water-soluble cystamine-block copolymer undergoes air/pH-mediated programmable self-assembly/reconstructions simply stemming from the unique environment-mediated reaction complexity of the cystamine-functionalized unit.

Polymerization-induced self-assembly of block copolymer nano-objects via RAFT aqueous dispersion polymerization

In this Perspective, we discuss the recent development of polymerization-induced self-assembly mediated by reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization. This approach has quickly become a powerful and versatile technique for the synthesis of a wide range of bespoke organic diblock copolymer nano-objects of controllable size, morphology, and surface functionality. Given its potential scalability, such environmentally-friendly formulations are expected to offer many potential applications, such as novel Pickering emulsifiers, efficient microencapsulation vehicles, and sterilizable thermo-responsive hydrogels for the cost-effective long-term storage of mammalian cells.

In Situ Formation of Polymer-Gold Composite Nanoparticles with Tunable Morphologies

A simple and efficient route to gold-polymer nanoparticle composites is described. Our versatile synthetic route exerts facile control over polymer nanoparticle morphology, including micelles, rod-like structures, and vesicles, all easily attainable from a single polymerization taken to different monomer conversions. Specifically, poly[oligo(ethylene glycol) methacrylate]-b-poly(dimethylaminoethyl methacrylate)-b-poly(styrene) (POEGMA-b-PDMAEMA-b-PST) triblock copolymers were synthesized using a polymerization induced self-assembly (PISA) approach. Subsequently, spherical gold nanoparticles (10 nm AuNPs) were formed at the hydrophilic-hydrophobic nexus of the assembled triblock copolymer nanoaggregates by the addition of chloroauric acid (HAuCl₄) followed by in situ reduction using NaBH₄. After reduction, the cloudy white nanoparticle dispersions turned to a red-purple color. The gold nanoparticles that formed were stabilized by the enveloping polymeric nanostructures, neither precipitation nor agglomeration occurred. We demonstrated that we were able to tune the gold nanoparticle composition in these polymer-gold composites by varying the concentration of chloroauric acid. Morphology, particle size, molecular weight, AuNP content, and chemical structure of the polymer structures were characterized by transmittance electron microscopy (TEM), dynamic light scattering (DLS), size exclusion chromatography (SEC), thermal gravimetric analysis (TGA), and ¹H NMR. Finally, the formation of the AuNPs occurred without affecting the polymer nanoparticle morphology.

Polymerization-induced self-assembly: ethanolic RAFT dispersion polymerization of 2-phenylethyl methacrylate

Reversible addition-fragmentation chain transfer (RAFT) radical dispersion polymerization (RAFTDP) has been employed to polymerize 2-phenylethyl methacrylate (PEMA) using poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) macromolecular chain transfer agents (macro-CTAs) of varying average degree of polymerization (X̄_n).

Doubly thermo-responsive ABC triblock copolymer nanoparticles prepared through dispersion RAFT polymerization

Doubly thermo-responsive triblock copolymer nanoparticles are prepared by a dispersion RAFT polymerization and the nanoparticles exhibit a two-step phase-transition with increasing temperature.

Comparison of pseudo-living character of RAFT polymerizations conducted under homogeneous and heterogeneous conditions

Evidence is presented for (i) the greater pseudo-living character of RAFT dispersion polymerization compared to the equivalent solution polymerization and (ii) the presence of monomer-swollen micelles in the former formulation.