Translocation of single-wall carbon nanotubes through solid-state nanopores

Direct Detection of Conserved Viral Sequences and Other Nucleic Acid Motifs with Solid-State Nanopores

The rapid and reliable recognition of nucleic acid sequences is essential to a broad range of fields including genotyping, gene expression analysis, and pathogen screening. For viral detection in particular, the capability is critical for optimal therapeutic response and preventing disease transmission. Here, we report an approach for detecting identifying sequence motifs within genome-scale single-strand DNA and RNA based on solid-state nanopores. By designing DNA oligonucleotide probes with complementarity to target sequences within a target genome, we establish a protocol to yield affinity-tagged duplex molecules the same length as the probe only if the target is present. The product can subsequently be bound to a protein chaperone and analyzed quantitatively with a selective solid-state nanopore assay. We first use a model DNA genome (M13mp18) to validate the approach, showing the successful isolation and detection of multiple target sequences simultaneously. We then demonstrate the protocol for the detection of RNA viruses by identifying and targeting a highly conserved sequence within human immunodeficiency virus (HIV-1B).

Nanopipettes: a potential tool for DNA detection

As the information in DNA is of practical value for clinical diagnosis, it is important to develop efficient and rapid methods for DNA detection. In the past decades, nanopores have been extensively explored for DNA detection due to their low cost and high efficiency. As a sub-group of the solid-state nanopore, nanopipettes exhibit great potential for DNA detection which is ascribed to their stability, ease of fabrication and good compatibility with other technologies, compared with biological and traditional solid-state nanopores. Herein, the review systematically summarizes the recent progress in DNA detection with nanopipettes and highlights those studies dedicated to improve the performance of DNA detection using nanopipettes through different approaches, including reducing the rate of DNA translocation, improving the spatial resolution of sensing nanopipettes, and controlling DNA molecules through novel techniques. Besides, some new perspectives of the integration of nanopipettes with other technologies are reviewed.

Solid-state nanopore analysis of alcohol-soluble molecules

We report on a modified solid-state nanopore measurement scheme to probe alcohol-soluble proteins.

New technologies for DNA analysis--a review of the READNA Project

The REvolutionary Approaches and Devices for Nucleic Acid analysis (READNA) project received funding from the European Commission for 41/2 years. The objectives of the project revolved around technological developments in nucleic acid analysis. The project partners have discovered, created and developed a huge body of insights into nucleic acid analysis, ranging from improvements and implementation of current technologies to the most promising sequencing technologies that constitute a 3(rd) and 4(th) generation of sequencing methods with nanopores and in situ sequencing, respectively.

Dialytic Separation of Bundled, Functionalized Carbon Nanotubes from Carbonaceous Impurities

Separating functionalized single-wall carbon nanotubes (SWCNTs) from functionalized amorphous carbon is challenging, due to their polydispersity and similar physicochemical properties. We describe a single-step, dialytic separation method that takes advantage of the ability of heavily functionalized SWCNTs to bundle in a polar environment while maintaining their solubility. Experiments on functionalized SWCNTs were compared with functionalized, C60 fullerenes (buckyballs) to probe the general applicability of the method and further characterize the bundling process. This approach may simultaneously be used to purify a functionalization reaction mixture of unreacted small molecules and of residual solvents, such as dimethylformamide.

Selective detection and quantification of modified DNA with solid-state nanopores

We demonstrate a solid-state nanopore assay for the unambiguous discrimination and quantification of modified DNA. Individual streptavidin proteins are employed as high-affinity tags for DNA containing a single biotin moiety. We establish that the rate of translocation events corresponds directly to relative concentration of protein-DNA complexes and use the selectivity of our approach to quantify modified oligonucleotides from among a background of unmodified DNA in solution.

Gold nanorod translocations and charge measurement through solid-state nanopores

We study translocations of gold nanoparticles and nanorods through silicon nitride nanopores and present a method for determining the surface charge of nanorods from the magnitude of the ionic current change as nanorods pass through the pore. Positively charged nanorods and spherical nanoparticles with average diameters 10 nm and average nanorod lengths between 44 and 65 nm were translocated through 40 nm thick nanopores with diameters between 19 and 27 nm in 1, 10, or 100 mM KCl solutions. Nanorod passage through the nanopores decreases ion current in larger diameter pores, as in the case of typical Coulter counters, but it increases ion current in smaller diameter nanopores, likely because of the interaction of the nanopore's and nanoparticle's double layers. The presented method predicts a surface charge of 26 mC/m(2) for 44 nm long gold nanorods and 18 mC/m(2) for 65 nm long gold nanorods and facilitates future studies of ligand coverage and surface charge effects in anisotropic particles.

Solid-state nanopores and nanopore arrays optimized for optical detection

While conventional solid-state nanopore measurements utilize ionic current, there is a growing interest in alternative sensing paradigms, including optical detection. However, a limiting factor in the application of optical schemes in particular is the inherent background fluorescence created by the solid-state membrane itself, which can interfere with the desired signal and place restrictions on the fluorophores that can be employed. An ideal device would incorporate a localized reduction in membrane fluorescence using a method that can be integrated easily with the nanopore fabrication process. Here, we demonstrate that in addition to forming nanopores and nanopore arrays, a focused helium ion beam can be used to reduce the fluorescence of a conventional silicon nitride membrane controllably. The reduction in background produces low-fluorescence devices that can be used for optical detection of double-strand DNA, as well as for conventional resistive pulse sensing. This approach is used to identify the translocation of short single-strand DNA through individual nanopores within an array, creating potential for a massively-parallel detection scheme.

Resistive-pulse analysis of nanoparticles

The development of nanopore fabrication methods during the past decade has led to the resurgence of resistive-pulse analysis of nanoparticles. The newly developed resistive-pulse methods enable researchers to simultaneously study properties of a single nanoparticle and statistics of a large ensemble of nanoparticles. This review covers the basic theory and recent advances in applying resistive-pulse analysis and extends to more complex transport motion (e.g., stochastic thermal motion of a single nanoparticle) and unusual electrical responses (e.g., resistive-pulse response sensitive to surface charge), followed by a brief summary of numerical simulations performed in this field. We emphasize the forces within a nanopore governing translocation of low-aspect-ratio, nondeformable particles but conclude by also considering soft materials such as liposomes and microgels.

Ultrathin suspended nanopores with surface plasmon resonance fabricated by combined colloidal lithography and film transfer

Suspended plasmonic nanopores in ultrathin film layers were fabricated through a simple and widely applicable method combining colloidal lithography and thin film transfer, which allows mass production of short-range ordered nanopore arrays on a large scale. By this combined method, mechanically stable and flexible free-standing nanopore membranes with a thickness down to 15-30 nm were produced. The plasmon resonances of the ultrathin plasmonic nanopores fabricated in AlN/Au/AlN trilayer and single layer Au membranes were tuned to lie in the vis-NIR wavelength range by properly designing their dimensions. The optical responses to the refractive index changes were tested and applied to adlayer sensing. The trilayer nanopore membrane showed a unique property to support water only on one side of the membrane, which was confirmed by the resonance shift and comparison with numerical simulation. Pore size reduction down to 10 nm can be achieved through additional material deposition. The filtering function of such pore-size-reduced conical shaped nanofunnels has also been demonstrated. The presented nanopore fabrication method offers new platforms for ultrathin nanopore sensing or filtering devices with controlled pore-size and optical properties. The film transfer technique employed in this work would enable the transformation of any substrate-based nanostructures to free-standing membrane based devices without complicated multiple etching processes.

Membrane thickness dependence of nanopore formation with a focused helium ion beam

Solid-state nanopores are emerging as a valuable tool for the detection and characterization of individual biomolecules. Central to their success is the realization of fabrication strategies that are both rapid and flexible in their ability to achieve diverse device dimensions. In this paper, we demonstrate the membrane thickness dependence of solid-state nanopore formation with a focused helium ion beam. We vary membrane thickness in situ and show that the rate of pore expansion follows a reproducible trend under all investigated membrane conditions. We show that this trend shifts to lower ion dose for thin membranes in a manner that can be described quantitatively, allowing devices of arbitrary dimension to be realized. Finally, we demonstrate that thin, small-diameter nanopores formed with our approach can be utilized for high signal-to-noise ratio resistive pulse sensing of DNA.

Nanotubes complexed with DNA and proteins for resistive-pulse sensing

We use a resistive-pulse technique to analyze molecular hybrids of single-wall carbon nanotubes (SWNTs) wrapped in either single-stranded DNA or protein. Electric fields confined in a glass capillary nanopore allow us to probe the physical size and surface properties of molecular hybrids at the single-molecule level. We find that the translocation duration of a macromolecular hybrid is determined by its hydrodynamic size and solution mobility. The event current reveals the effects of ion exclusion by the rod-shaped hybrids and possible effects due to temporary polarization of the SWNT core. Our results pave the way to direct sensing of small DNA or protein molecules in a large unmodified solid-state nanopore by using nanofilaments as carriers.

The role of pore geometry in single nanoparticle detection

We observe single nanoparticle translocation events via resistive pulse sensing using silicon nitride pores described by a range of lengths and diameters. Pores are prepared by focused ion beam milling in 50 nm-, 100 nm-, and 500 nm-thick silicon nitride membranes with diameters fabricated to accommodate spherical silica nanoparticles with sizes chosen to mimic that of virus particles. In this manner, we are able to characterize the role of pore geometry in three key components of the detection scheme, namely, event magnitude, event duration, and event frequency. We find that the electric field created by the applied voltage and the pore's geometry is a critical factor. We develop approximations to describe this field, which are verified with computer simulations, and interactions between particles and this field. In so doing, we formulate what we believe to be the first approximation for the magnitude of ionic current blockage that explicitly addresses the invariance of access resistance of solid-state pores during particle translocation. These approximations also provide a suitable foundation for estimating the zeta potential of the particles and/or pore surface when studied in conjunction with event durations. We also verify that translocation achieved by electro-osmostic transport is an effective means of slowing translocation velocities of highly charged particles without compromising particle capture rate as compared to more traditional approaches based on electrophoretic transport.

Voltage-driven translocation of DNA through a high throughput conical solid-state nanopore

Nanopores have become an important tool for molecule detection at single molecular level. With the development of fabrication technology, synthesized solid-state membranes are promising candidate substrates in respect of their exceptional robustness and controllable size and shape. Here, a 30-60 (tip-base) nm conical nanopore fabricated in 100 nm thick silicon nitride (Si(3)N(4)) membrane by focused ion beam (FIB) has been employed for the analysis of λ-DNA translocations at different voltage biases from 200 to 450 mV. The distributions of translocation time and current blockage, as well as the events frequencies as a function of voltage are investigated. Similar to previously published work, the presence and configurations of λ-DNA molecules are characterized, also, we find that greater applied voltages markedly increase the events rate, and stretch the coiled λ-DNA molecules into linear form. However, compared to 6-30 nm ultrathin solid-state nanopores, a threshold voltage of 181 mV is found to be necessary to drive DNA molecules through the nanopore due to conical shape and length of the pore. The speed is slowed down ∼5 times, while the capture radius is ∼2 fold larger. The results show that the large nanopore in thick membrane with an improved stability and throughput also has the ability to detect the molecules at a single molecular level, as well as slows down the velocity of molecules passing through the pore. This work will provide more motivations for the development of nanopores as a Multi-functional sensor for a wide range of biopolymers and nano materials.

Nanopore-Based Sensors for Detecting Toxicity of a Carbon Nanotube to Proteins

A carbon nanotube (CNT) can be toxic to a living cell by binding to proteins and then impairing their functionalities; however, an efficient screening method that examines binding capability of a CNT to protein molecules in vitro is still unavailable. Here, we show that a nanopore-based sensor can be used to investigate CNT-protein interactions. With proof-of-principle molecular dynamics simulations, we have measured ionic currents in a nanopore when threading a CNT-protein complex through the pore, and demonstrated that CNT's binding capability, and thus potential nanotoxicity, can be inferred from current signals. We have then further investigated mechanics and energetics of CNT-protein interactions with the nanopore sensor. These findings indicate that solid-state nanopores have the potential to be ultra-sensitive and high-throughput sensors for nanotoxicity.

Manufactured and airborne nanoparticle cardiopulmonary interactions: a review of mechanisms and the possible contribution of mast cells

Human inhalation exposures to manufactured nanoparticles (NP) and airborne ultrafine particles (UFP) continues to increase in both occupational and environmental settings. UFP exposures have been associated with increased cardiovascular mortality and morbidity, while ongoing research supports adverse systemic and cardiovascular health effects after NP exposures. Adverse cardiovascular health effects include alterations in heart rate variability, hypertension, thrombosis, arrhythmias, increased myocardial infarction, and atherosclerosis. Exactly how UFP and NP cause these negative cardiovascular effects is poorly understood, however a variety of mediators and mechanisms have been proposed. UFP and NP, as well as their soluble components, are known to systemically translocate from the lung. Translocated particles could mediate cardiovascular toxicity through direct interactions with the vasculature, blood, and heart. Recent study suggests that sensory nerve stimulation within the lung may also contribute to UFP- and NP-induced acute cardiovascular alterations. Activation of sensory nerves, such as C-fibers, within the lung may result in altered cardiac rhythm and function. Lastly, release of pulmonary-derived mediators into systemic circulation has been proposed to facilitate cardiovascular effects. In general, these proposed pulmonary-derived mediators include proinflammatory cytokines, oxidatively modified macromolecules, vasoactive proteins, and prothrombotic factors. These pulmonary-derived mediators have been postulated to contribute to the subsequent prothrombotic, atherogenic, and inflammatory effects after exposure. This review will evaluate the potential contribution of individual mediators and mechanisms in facilitating cardiopulmonary toxicity following inhalation of UFP and NP. Lastly, we will appraise the literature and propose a hypothesis regarding the possible role of mast cells in contributing to these systemic effects.

Noise-induced current switching in semiconductor superlattices: observation of nonexponential kinetics in a high-dimensional system

We report on measurements of first-passage-time distributions associated with current switching in weakly coupled GaAs/AlAs superlattices driven by shot noise, a system that is both far from equilibrium and high dimensional. Static current-voltage (I-V) characteristics exhibit multiple current branches and bistability; precision, high-bandwidth current switching data are collected in response to steps in the applied voltage to final voltages V1 near the end of a current branch. For a range of V1 values, the measured switching times vary stochastically. At short times (≲10  μs), the switching time distributions decay exponentially, while at longer times the distributions develop nonexponential tails that follow an approximate power law over several decades. The power law decay behavior is attributed to the presence of multiple switching pathways, which may arise from small spatial variations in the superlattice growth parameters.