Redox multiphoton polymerization for 3D nanofabrication

Two-photon polymerization for 3D biomedical scaffolds: Overview and updates

The needs for high-resolution, well-defined and complex 3D microstructures in diverse fields call for the rapid development of novel 3D microfabrication techniques. Among those, two-photon polymerization (TPP) attracted extensive attention owing to its unique and useful characteristics. As an approach to implementing additive manufacturing, TPP has truly 3D writing ability to fabricate artificially designed constructs with arbitrary geometry. The spatial resolution of the manufactured structures via TPP can exceed the diffraction limit. The 3D structures fabricated by TPP could properly mimic the microenvironment of natural extracellular matrix, providing powerful tools for the study of cell behavior. TPP can meet the requirements of manufacturing technique for 3D scaffolds (engineering cell culture matrices) used in cytobiology, tissue engineering and regenerative medicine. In this review, we demonstrated the development in 3D microfabrication techniques and we presented an overview of the applications of TPP as an advanced manufacturing technique in complex 3D biomedical scaffolds fabrication. Given this multidisciplinary field, we discussed the perspectives of physics, materials science, chemistry, biomedicine and mechanical engineering. Additionally, we dived into the principles of tow-photon absorption (TPA) and TPP, requirements of 3D biomedical scaffolders, developed-to-date materials and chemical approaches used by TPP and manufacturing strategies based on mechanical engineering. In the end, we draw out the limitations of TPP on 3D manufacturing for now along with some prospects of its future outlook towards the fabrication of 3D biomedical scaffolds.

Femtosecond laser hybrid fabrication of a 3D microfluidic chip for PCR application

Microfluidic chips have gradually become a focus of scientific research. However, the fabrication of key functional components in microfluidic chips is always limited by the existing processing methods. The microfluidic chip is difficult to be three-dimensional (3D) and integrated. In response to the key problems of 3D integrated microfluidic chip fabrication, this paper presents a hybrid method for fabricating a microfluidic chip integrated 3D microchannels and metal microstructures by femtosecond laser wet etch technology and liquid metal injection. The integrated microfluidic chip fabricated by this method is expected to be applied to the core reaction unit of integrated PCR devices.

Biocompatibility Investigation of Hybrid Organometallic Polymers for Sub-Micron 3D Printing via Laser Two-Photon Polymerisation

Hybrid organometallic polymers are a class of functional materials which can be used to produce structures with sub-micron features via laser two-photon polymerisation. Previous studies demonstrated the relative biocompatibility of Al and Zr containing hybrid organometallic polymers in vitro. However, a deeper understanding of their effects on intracellular processes is needed if a tissue engineering strategy based on these materials is to be envisioned. Herein, primary rat myogenic cells were cultured on spin-coated Al and Zr containing polymer surfaces to investigate how each material affects the viability, adhesion strength, adhesion-associated protein expression, rate of cellular metabolism and collagen secretion. We found that the investigated surfaces supported cellular growth to full confluency. A subsequent MTT assay showed that glass and Zr surfaces led to higher rates of metabolism than did the Al surfaces. A viability assay revealed that all surfaces supported comparable levels of cell viability. Cellular adhesion strength assessment showed an insignificantly stronger relative adhesion after 4 h of culture than after 24 h. The largest amount of collagen was secreted by cells grown on the Al-containing surface. In conclusion, the materials were found to be biocompatible in vitro and have potential for bioengineering applications.

Quantum dot based 3D printed woodpile photonic crystals tuned for the visible

The development of dynamically responsive 3D photonic elements, which is crucial for the design of active integrated photonic circuits, requires the incorporation of material systems with fast and tunable response. To this end, semiconductor quantum dots have been widely used to perform as the active material system to be integrated; nonetheless, multiple-step processing is usually required for the active functions to be preserved, thereby restricting functionality of integrated 3D quantum photonic elements mostly to the infrared. Here, we report a simple scheme for the realization of visible light active 3D photonic devices by combining direct laser writing with two-photon absorption and in situ synthesis of cadmium sulfide (CdS) nanoparticles. The novel active 3D printable hybrid material is synthesized by crosslinking precursors of CdS quantum dots into a photo-structurable organic-inorganic zirconium-silicon hybrid composite integrating functional properties of both high spatial resolution and high third-order nonlinearity into the photonic matrix. As a proof-of-demonstration for 3D printed active photonic devices, woodpile photonic crystals with an inlayer periodicity down to 500 nm are successfully fabricated showing clear photonic stop bands in the visible spectral region, while for the first time, evidence of an ultrafast dynamic response in the visible is also demonstrated.

Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics

The combination of materials with targeted optical properties and of complex, 3D architectures, which can be nowadays obtained by additive manufacturing, opens unprecedented opportunities for developing new integrated systems in photonics and optoelectronics. The recent progress in additive technologies for processing optical materials is here presented, with emphasis on accessible geometries, achievable spatial resolution, and requirements for printable optical materials. Relevant examples of photonic and optoelectronic devices fabricated by 3D printing are shown, which include light-emitting diodes, lasers, waveguides, optical sensors, photonic crystals and metamaterials, and micro-optical components. The potential of additive manufacturing applied to photonics and optoelectronics is enormous, and the field is still in its infancy. Future directions for research include the development of fully printable optical and architected materials, of effective and versatile platforms for multimaterial processing, and of high-throughput 3D printing technologies that can concomitantly reach high resolution and large working volumes.

A versatile method for the UVA-induced cross-linking of acetophenone- or benzophenone-functionalized DNA

Bioconjugation, biosensing, bioimaging, bionanomaterials, etc., are only a few examples of application of functionalized DNA. Since base-modified nucleic acids contribute not only to a broad range of biotechnological fields but also to the understanding of various cellular processes, it is crucial to design novel modifications with unique properties. Here, we demonstrate the utilization of N⁴-cytidine modified oligonucleotides, which contain reactive acetophenone (AP) or benzophenone (BP) groups, for the UV-induced cross-linking. We find that terminal deoxynucleotidyl transferase-mediated 3'-tailing using AP/BP-containing modified nucleotides generates photoactive DNA, suitable for a straightforward covalent cross-linking with both interacting proteins and a variety of well-known solid polymeric supports. Moreover, we show that AP/BP-functionalization of nucleic acid molecules induces an efficient cross-linking upon exposure to UVA light. Our findings reveal that 3'-tailed single-stranded DNA bearing AP/BP-moieties is easily photoimmobilized onto untreated polystyrene, polypropylene, polylactate, polydimethylsiloxane, sol-gel and borosilicate glass substrates. Furthermore, we demonstrate that such immobilized DNA probes can be further used for successful hybridization of complementary DNA targets. Our results establish novel N⁴-cytosine nucleobase modifications as photoreactive labels and suggest an effortless approach for photoimmobilization of nucleic acids.

Laser-assisted high-pressure-induced polymerization of 2-(hydroxyethyl)methacrylate

We report on a successful room-temperature polymerization of 2-(hydroxyethyl)methacrylate (HEMA) under high pressure. The polymerization is observed in a limited range of pressures 0.1 to 1.6 GPa without the use of any initiator. When the compressed sample is irradiated at 488 or 355 nm by a laser, the polymerization reaction rate is increased by a factor of 10 or 30, respectively. Moreover, the shift of the laser wavelength to the UV improves the polymerization yield of the recovered sample to 84%. The catalysis of the polymerization process by light results from a one-photon-assisted electron transfer to π* antibonding states of the monomer molecule. The observed polymerization is irreversible and almost complete, which makes this synthesis process suitable for applications.