Electronic and mechanical modification of single-walled carbon nanotubes by binding to porphyrin oligomers

Mechanistic insights into photoinduced energy and charge transfer dynamics between magnesium-centered tetrapyrroles and carbon nanotubes

Functionalizing single-walled carbon nanotubes (SWNTs) with light-harvesting molecules is a facile way to construct donor-acceptor nanoarchitectures with intriguing optoelectronic properties. Magnesium-centered bacteriochlorin (MgBC), chlorin (MgC), and porphyrin (MgP) are a series of tetrapyrrole macrocycles comprising a central metal and four coordinated aromatic or antiaromatic five-membered rings linked by methine units, which show excellent visible light absorption. To delineate the effects of the aromaticity of coordinated rings on the optoelectronic properties of the nanocomposites, the photoinduced energy and charge transfer dynamics between Mg-centered tetrapyrroles and SWNTs are explored. The results show that excited energy transfer (EET) can occur within MgP@SWNT ascribed to the stabilization of the highest occupied molecular orbital (HOMO) in MgP with the increase of aromatic coordinated rings, while only electron transfer can take place in MgBC@SWNT and MgC@SWNT. Non-adiabatic dynamics simulations demonstrate that electron and hole transfer from MgP to SWNT is asynchronous. The electron transfer is ultrafast with a timescale of ca. 50 fs. By contrast, the hole transfer is significantly suppressed, although it can be accelerated to some extent when using a lower excitation energy of 2.2 eV as opposed to 3.1 eV. Further analysis reveals that the large energy gaps between charge-donor and charge-acceptor states play a crucial role in regulating photoexcited state relaxation dynamics. Our theoretical insights elucidate the structure-functionality interrelations between Mg-centered tetrapyrroles and SWNTs and provide a comprehensive understanding of the underlying charge transfer mechanism within MgP@SWNT nanocomposites, which paves the way for the forthcoming development of SWNT-based photo-related functional materials with targeted applications.

Nanotube-Based 1D Heterostructures Coupled by van der Waals Forces

1D van der Waals heterostructures based on carbon nanotube templates are raising a lot of excitement due to the possibility of creating new optical and electronic properties, by either confining molecules inside their hollow core or by adding layers on the outside of the nanotube. In contrast to their 2D analogs, where the number of layers, atomic type and relative orientation of the constituting layers are the main parameters defining physical properties, 1D heterostructures provide an additional degree of freedom, i.e., their specific diameter and chiral structure, for engineering their characteristics. The current state-of-the-art in synthesizing 1D heterostructures are discussed here, in particular focusing on their resulting optical properties, and details the vast parameter space that can be used to design heterostructures with custom-built properties that can be integrated into a large variety of applications. First, the effects of van der Waals coupling on the properties of the simplest and best-studied 1D heterostructure, namely a double-walled carbon nanotube, are described, and then heterostructures built from the inside and the outside are considered, which all use a nanotube as a template, and, finally, an outlook is provided for the future of this research field.

Supramolecular Complexes of Graphene Oxide with Porphyrins: An Interplay between Electronic and Magnetic Properties

Graphene oxide (GO) was modified by two modified porphyrins (THPP and TCPP) to form GO–porphyrin hybrids. Spectroscopic measurements demonstrated the formation of stable supramolecular aggregates when mixing two components in solution. The Fourier transform infrared (FTIR) and Raman scattering measurements confirm π-stacking between hydrophobic regions of GO nanoflakes and porphyrin molecules. On the number and the kind of paramagnetic centers generated in pristine GO samples, which originate from spin anomalies at the edges of aromatic domains within GO nanoflakes. More significant changes in electronic properties have been observed in hybrid materials. This is particularly evident in the drastic increase in the number of unpaired electrons for the THPP-GO sample and the decrease in the number of unpaired electrons for the TCPP-GO. The difference of paramagnetic properties of hybrid materials is a consequence of π-stacking between GO and porphyrin rings. An interesting interplay between modifiers and the surface of GO leads to a significant change in electronic structure and magnetic properties of the designed hybrid materials. Based on the selection of molecular counterpart we can affect the behavior of hybrids upon light irradiation in a different manner, which may be useful for the applications in photovoltaics, optoelectronics, and spintronics.

Solubilization of Carbon Nanotubes with Ethylene-Vinyl Acetate for Solution-Processed Conductive Films and Charge Extraction Layers in Perovskite Solar Cells

Carbon nanotube (CNT) solubilization via non-covalent wrapping of conjugated semiconducting polymers is a common technique used to produce stable dispersions for depositing CNTs from solution. Here, we report the use of a non-conjugated insulating polymer, ethylene vinyl acetate (EVA), to disperse multi- and single-walled CNTs (MWCNT and SWCNT) in organic solvents. We demonstrate that despite the insulating nature of the EVA, we can produce semitransparent films with conductivities of up to 34 S/cm. We show, using photoluminescence spectroscopy, that the EVA strongly binds to individual CNTs, thus making them soluble, preventing aggregation, and facilitating the deposition of high-quality films. To prove the good electronic properties of this composite, we have fabricated perovskite solar cells using EVA/SWCNTs and EVA/MWCNTs as selective hole contact, obtaining power conversion efficiencies of up to 17.1%, demonstrating that the insulating polymer does not prevent the charge transfer from the active material to the CNTs.

Grafting of porphyrin oligomers on single-walled carbon nanotubes by Hay coupling

The fabrication of nanotube-based functional materials is still limited by the difficulty in incorporating highly engineered molecules onto the nanotube surface. To overcome this difficulty, the development of procedures involving two subsequent reaction steps on the nanotubes appeared particularly promising. It was previously demonstrated that "click chemistry" (CuAAC) permits efficiently functionalising nanotubes with a wide variety of materials (from inorganic to biological). In this work, we present an original strategy based on Hay coupling (i.e. the oxidative coupling between triple bonds) to fabricate nanotube-porphyrin conjugates. Porphyrins containing ethynyl functional groups were attached on single-walled carbon nanotubes (SWNTs) bearing phenylacetylene groups and the resulting materials were fully characterised.

Ultrafast, asymmetric charge transfer and slow charge recombination in porphyrin/CNT composites demonstrated by time-domain atomistic simulation

The versatile photochemical properties of porphyrin molecules make them excellent candidates for solar energy applications. Carbon nanotubes (CNTs) exhibit superior charge conductivity and have been combined with porphyrins to achieve efficient and ultrafast charge separation. Experiments show that the charge separated state lives less than 10 ps, which is too short for applications. Using real-time time-dependent tight binding density functional theory (DFTB) combined with non-adiabatic molecular dynamics (NAMD), we model photo-induced charge separation and recombination in two porphyrin/CNT composites. Having achieved excellent agreement with the experiment for the electron transfer from the porphyrins to the CNT, we demonstrate that hole transfer can be achieved upon CNT excitation, although in a less efficient way. By exciting the CNT one can extend light harvesting into lower energies of the solar spectrum and increase solar light conversion efficiency. We also show that the charge separated state can live over 1 ns. The two orders of magnitude difference from the experimental lifetime could arise due to the presence of defects or metallic tubes in the samples. The charge separated state is long-lived because the non-adiabatic electron-phonon coupling is very small, less than 1 meV, and the quantum coherence is short, 15-20 fs. The excited states in the isolated porphyrins and CNT live around 100 ps, in agreement with experiments as well. The porphyrin/CNT interaction occurs through the π-electron systems of the two species. The non-radiative relaxation is promoted by both high and low frequency phonons, with higher frequency phonons playing more important roles in electron relaxation than in hole relaxation. Low frequency phonons contribute significantly to the decay of the charge separated state, because they modulate the relative positions of the porphyrins and the CNT. The time-domain atomistic simulations provide a detailed understanding of the charge separation and recombination mechanisms, and generate valuable guidelines for the optimization of photovoltaic efficiency in modern nanoscale materials.

The mechanical bond on carbon nanotubes: diameter-selective functionalization and effects on physical properties

We describe the functionalization of SWNTs enriched in (6,5) chirality with electron donating macrocycles to yield rotaxane-type mechanically interlocked carbon nanotubes (MINTs). Investigations by means of electron microscopy and control experiments corroborated the interlocked nature of the MINTs. A comprehensive characterization of the MINTs through UV-vis-NIR, Raman, fluorescence, transient absorption spectroscopy, cyclic voltammetry, and chronoamperometry was carried out. Analyses of the spectroscopic data reveal that the MINT-forming reaction proceeds with diameter selectivity, favoring functionalization of (6,5) SWNTs rather than larger (7,6) SWNTs. In the ground state, we found a lack of significant charge-transfer interactions between the electron donor exTTF and the SWNTs. Upon photoexcitation, efficient charge-transfer between the electron donating exTTF macrocycles and SWNTs was demonstrated. As a complement, we established significantly different charge-transfer rate constants and diffusion coefficients for MINTs and the supramolecular models, which confirms the fundamentally different type of interactions between exTTF and SWNTs in the presence or absence of the mechanical bond. Molecular mechanics and DFT calculations support the experimental findings.

meso-Tetrakis[4-(methoxycarbonyl)phenyl]porphyrinatopalladium(ii) supported on graphene oxide nanosheets (Pd(ii)-TMCPP-GO): synthesis and catalytic activity

In this study, meso-tetrakis[4-(methoxycarbonyl)phenyl]porphynatopalladium(ii) as a macrocyclic palladium complex was covalently grafted to the surface of graphene oxide (Pd-TMCPP-GO). The prepared catalyst was checked in Suzuki reaction.

Engineering nanostructures by binding single molecules to single-walled carbon nanotubes

Organic and hybrid organic-inorganic systems are promising candidates for low cost photovoltaics. Recently, perovskite-based systems have been attracting a large amount of research attention, where the highest performing devices employ a small molecule (2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene) (Spiro-OMeTAD) hole transporter. Here, we demonstrate the production of single-walled carbon nanotube (SWNT)/single molecule nanostructures using a simple solution processing technique for effective and strong binding of Spiro-OMeTAD to individual polymer-wrapped SWNTs. These small molecules bind very strongly, which causes both large mechanical strain of the nanotubes and also improves the separation of individual SWNTs, thus improving the nanotube photoluminescence quantum efficiency by 1 order of magnitude compared to simple polymer-nanotube nanohybrids. Using absorption and photoluminescence measurements, we show that there is a dramatic variation in the electronic properties of the polymer-NT nanocomposites due to the band alignment formed with Spiro-OMeTAD. These self-assembled nanocomposites offer the potential for integration into high performance optoelectronic such as photovoltaic cells and light emission devices.

Phase aggregation and morphology effects on nanocarbon optoelectronics

Controllable morphology and interfacial interactions within bulk heterojunction nanostructures show significant effects on optoelectronic device applications. In this study, a nanocarbon heterojunction, consisting of single-walled carbon nanotubes (s-SWCNTs) and fullerene derivatives, is reported by assembling/blending its structures through solution-based processes. A uniform and dense graphene oxide hole transport layer is used to facilitate the photoconversion at a near infrared (NIR) wavelength. Effective interfacial interaction between the s-SWCNTs and fullerene is suggested by the redshifted photoabsorption and nanoscale/micron-scale fluorescence, which is associated with self-assembled nanocarbon morphology.

Carbon nanotube-templated synthesis of covalent porphyrin network for oxygen reduction reaction

The development of innovative techniques for the functionalization of carbon nanotubes that preserve their exceptional quality, while robustly enriching their properties, is a central issue for their integration in applications. In this work, we describe the formation of a covalent network of porphyrins around MWNT surfaces. The approach is based on the adsorption of cobalt(II) meso-tetraethynylporphyrins on the nanotube sidewalls followed by the dimerization of the triple bonds via Hay-coupling; during the reaction, the nanotube acts as a template for the formation of the polymeric layer. The material shows an increased stability resulting from the cooperative effect of the multiple π-stacking interactions between the porphyrins and the nanotube and by the covalent links between the porphyrins. The nanotube hybrids were fully characterized and tested as the supported catalyst for the oxygen reduction reaction (ORR) in a series of electrochemical measurements under acidic conditions. Compared to similar systems in which monomeric porphyrins are simply physisorbed, MWNT-CoP hybrids showed a higher ORR activity associated with a number of exchanged electrons close to four, corresponding to the complete reduction of oxygen into water.

Influence of structure-selective fluorene-based polymer wrapping on optical transitions of single-wall carbon nanotubes

To understand how fluorene-based polymers selectively extract specific semiconducting single-wall carbon nanotubes (SWCNTs), we compared the optical transitions of SWCNTs wrapped with poly(9,9-dioctylfluorene-alt-pyridine) (PFOPy), i.e., structure-selective polymers, with those wrapped with poly(9,9-di-n-dodecylfluorene) (PFD), i.e., non-selective polymers, in organic solvents by using photoluminescence (PL) excitation spectroscopy. Two (n,m) species of PFOPy-wrapped SWCNTs with intermediate chiral angles exhibited blue-shifted emissions compared with the PFD-wrapped SWCNTs. The shifts in the peaks of PL signals cannot be explained in terms of the dielectric screening effect, but can plausibly be explained in terms of the strains of specific SWCNTs due to the PFOPy wrapping. Moreover, the emissions of specific SWCNTs wrapped with PFOPy were not blue-shifted as much when the solvent was changed from toluene to p-xylene, and this result could be accounted for by a change in the rigidity of the fluorene backbone. Moreover, using p-xylene instead of toluene lowered the selectivity of the SWCNT extraction, thereby suggesting the importance of having a rigid fluorene backbone for selective extraction of SWCNTs.

Nanoengineering coaxial carbon nanotube-dual-polymer heterostructures

We describe studies of new nanostructured materials consisting of carbon nanotubes wrapped in sequential coatings of two different semiconducting polymers, namely, poly(3-hexylthiophene) (P3HT) and poly(9,9'-dioctylfluorene-co-benzothiadiazole) (F8BT). Using absorption spectroscopy and steady-state and ultrafast photoluminescence measurements, we demonstrate the role of the different layer structures in controlling energy levels and charge transfer in both solution and film samples. By varying the simple solution processing steps, we can control the ordering and proportions of the wrapping polymers in the solid state. The resulting novel coaxial structures open up a variety of new applications for nanotube blends and are particularly promising for implementation into organic photovoltaic devices. The carbon nanotube template can also be used to optimize both the electronic properties and morphology of polymer composites in a much more controlled fashion than achieved previously, offering a route to producing a new generation of polymer nanostructures.

Supramolecular hetero-porphyrin SWNT complexes

The complexation of single walled carbon nanotubes (SWNTs) with neutral, anionic and cationic porphyrins has been investigated under identical complex forming conditions. The determination of the porphyrin loading reveals large differences depending on the nature of the porphyrin used. Combinations of different porphyrins to form mixed hetero-porphyrin complexes shows that the mixture of a cationic and anionic porphyrin results in loading which is an order of magnitude larger than in all other complexes. This complex also exhibits high adsorption and emission intensities and can be regarded as an extended co-operative binary ionic (CBI) solid. The complexes were further studied using Raman spectroscopy, elemental analysis, AFM and cyclic voltammetry.

Photoinduced charge separation in three-layer supramolecular nanohybrids: fullerene-porphyrin-SWCNT

Photoinduced charge separation processes of three-layer supramolecular hybrids, fullerene-porphyrin-SWCNT, which are constructed from semiconducting (7,6)- and (6,5)-enriched SWCNTs and self-assembled via π-π interacting long alkyl chain substituted porphyrins (tetrakis(4-dodecyloxyphenyl)porphyrins; abbreviated as MP(alkyl)(4)) (M = Zn and H(2)), to which imidazole functionalized fullerene[60] (C(60)Im) is coordinated, have been investigated in organic solvents. The intermolecular alkyl-π and π-π interactions between the MP(alkyl)(4) and SWCNTs, in addition, coordination between C(60)Im and Zn ion in the porphyrin cavity are visualized using DFT calculations at the B3LYP/3-21G(*) level, predicting donor-acceptor interactions between them in the ground and excited states. The donor-acceptor nanohybrids thus formed are characterized by TEM imaging, steady-state absorption and fluorescence spectra. The time-resolved fluorescence studies of MP(alkyl)(4) in two-layered nanohybrids (MP(alkyl)(4)/SWCNT) revealed efficient quenching of the singlet excited states of MP(alkyl)(4) ((1)MP*(alkyl)(4)) with the rate constants of charge separation (k(CS)) in the range of (1-9) × 10(9) s(-1). A nanosecond transient absorption technique confirmed the electron transfer products, MP˙(+)(alkyl)(4)/SWCNT˙(-) and/or MP˙(-)(alkyl)(4)/SWCNT˙(+) for the two-layer nanohybrids. Upon further coordination of C(60)Im to ZnP, acceleration of charge separation via(1)ZnP* in C(60)Im→ZnP(alkyl)(4)/SWCNT is observed to form C(60)˙(-)Im→ZnP˙(+)(alkyl)(4)/SWCNT and C(60)˙(-)Im→ZnP(alkyl)(4)/SWCNT˙(+) charge separated states as supported by the transient absorption spectra. These characteristic absorptions decay with rate constants due to charge recombination (k(CR)) in the range of (6-10) × 10(6) s(-1), corresponding to the lifetimes of the radical ion-pairs of 100-170 ns. The electron transfer in the nanohybrids has further been utilized for light-to-electricity conversion by the construction of proof-of-concept photoelectrochemical solar cells.