Strongly anisotropic orientational relaxation of water molecules in narrow carbon nanotubes and nanorings

Water in Electrocatalysis

Renewable electricity-powered electrocatalysis technologies occupy a central position in clean energy conversion and the pursuit of a net-zero carbon emission future. Water can serve multiple roles in electrocatalytic reactions, for instance, as a reaction medium, reactant, modifier, promoter, etc. This significantly influences the mass transport, active site, intermediate adsorption and reaction kinetics, ultimately determining the electrocatalytic performance (e.g., activity, selectivity, and stability) as well as device efficiency. As the heart location where electrocatalytic reactions occur, the typical electrical-double layer is established at a water-electrode interface. Therefore, the comprehension and regulation of water are crucial topics in electrocatalysis, which encourages us to organize this review. We begin with the fundamental understanding on structure of water and its behavior under electrochemical conditions. Subsequently, we delve into the "water effect" by elucidating specific functions of water in electrocatalysis. Recent advances in manipulating water to enhance electrocatalytic efficiency of representative reactions such as hydrogen evolution/oxidation, oxygen evolution/reduction, CO2 reduction, N2 reduction and organic electrosynthesis, are also highlighted. We finally discuss the remaining challenges and future opportunities in this field.

Estimating water transport in carbon nanotubes: a critical review and inclusion of scale effects

The quasi-frictionless water flow across graphitic surfaces offers vast opportunities for a wide range of applications from biomedical science to energy. However, the conflicting experimental results impede a clear understanding of the transport mechanism and desired flow control. Existing literature proposes numerous modifications and updated boundary conditions to extend classical hydrodynamic theories for nanoflows, yet a consensus or definitive conclusion remains elusive. This study presents a critical review of the proposed modifications of the pressure driven flow or the Hagen-Poiseuille (HP) equations to estimate the flow enhancement through carbon nanotubes (CNTs). For such a case, we performed (semi-)classical molecular dynamics simulations of water flow in various sizes of CNTs, applied the different forms of boundary definitions from the literature, and derived HP equation models by implementing these modifications. By aggregating seven distinct experimental datasets, we tested various flow enhancement models against our measurements. Our findings indicate that including the interfacial layering-based dynamic slip-definition in the proposed HP equations yields accurate estimations. While considering interfacial viscosity predicts the individual CNT experiments well, using the experimental viscosity yields better estimations of measurements for the water flow enhancement through membranes of CNTs. This critical review testing existing literature demonstrates how to refine continuum fluid mechanics to predict water flow enhancement at the nanoscale providing holistic multiscale modeling.

Ab Initio Molecular Dynamics Simulation of Water Transport through Short Carbon Nanotubes

Water transport through short single-walled (6, 6) carbon nanotubes (CNTs) was investigated with ab initio molecular dynamics (AIMD) simulation at different temperatures. The water molecules under extreme confinement present a one-dimensional jagged pattern owing to hydrogen bonding, with the near-perfect alignment of the dipole orientations. CNTs ending with dangling bonds can promote water dissociation near the entrance and the occurrence of dipole flipping along the water wire at high temperatures, accompanied by the formation of D defects and L defects in the hydrogen-bond network. In contrast, dissociation of water molecules rarely takes place if the dangling bonds at the ends of the CNTs are terminated with H atoms. Angular jumps of water molecules are commonplace inside the narrow CNTs, implying a low-energy barrier for hydrogen-bond exchange among water molecules in narrow CNTs. The simulation results demonstrate the high activity of dangling bonds at the ends of short CNTs, accompanying passivation processes and their profound impact on water structure and transport, which is important for diverse technological applications.

Mechanistic studies on the anomalous transport behaviors of water molecules in nanochannels of multilayer graphynes

An in-depth understanding of directed transport behaviors of water molecules through nanoporous materials is essential for the design and development of next-generation filtration devices. In this work, we perform molecular dynamics (MD) simulations to explore transport properties of water molecules through nanochannels of multilayer graphyne with different pore sizes. Our simulation results reveal that the orientations of confined water molecules would periodically reverse between two opposite directions as they diffuse along the nanochannels, and such a transport mechanism shows similarities with water transport in aquaporin channels. Further, we observe that, for each orientation reversal, there is an obvious difference in the HB breaking frequency among the three graphyne systems, with an order of graphyne-4 > graphyne-5 > graphyne-3. Besides, the average HB number is found to display a periodic fluctuation with a pulse-like pattern along the diffusion direction, wherein the graphyne-4 system has the maximum fluctuation, while the graphyne-3 system has the minimum one. Such anomalous HB breaking frequency and average HB number fluctuation results finally lead to a nonmonotonic relationship between water diffusion rate and graphyne pore size, and the diffusion order follows graphyne-4 > graphyne-5 > graphyne-3. Herein, we provide a new insight into the transport mechanisms of water molecules through nanoporous materials and our findings open up opportunities for the design and development of high-performance graphyne-based membranes used for water purification and desalination.

Anisotropy of the Proton Kinetic Energy as a Tool for Capturing Structural Transition in Water Confined in a Graphene Nanoslit Pore

The proton dynamics of a 2D water monolayer confined inside a graphene slit pore is studied in Cartesian and molecular frames of reference using molecular dynamics simulations. The vibrational density of states of the proton was calculated versus temperature and was further used to deduce the mean kinetic energy of the hydrogen atoms, Ke(H), in both frames of reference. The directional components of Ke(H) are in good agreement with experimental observations for bulk as well as nanoconfined water. Nonetheless, while in the molecular frame of reference the effect of temperature on the anisotropy ratios of Ke(H) (the ratio between its directional components) are practically invariant between the 2D and 3D cases, those in the Cartesian frame of reference reveal a rather notable reduction across 200 K, indicating the occurrence of an order-disorder transition. This result is further supported by the calculated entropy and enthalpy of the confined water molecules. Overall, it is shown that Ke(H) anisotropy ratios may serve as a valuable order parameter for detecting structural transformations in hydrogen bonds containing molecular systems.

Current Understanding of Water Properties inside Carbon Nanotubes

Confined water inside carbon nanotubes (CNTs) has attracted a lot of attention in recent years, amassing as a result a very large number of dedicated studies, both theoretical and experimental. This exceptional scientific interest can be understood in terms of the exotic properties of nanoconfined water, as well as the vast array of possible applications of CNTs in a wide range of fields stretching from geology to medicine and biology. This review presents an overreaching narrative of the properties of water in CNTs, based mostly on results from systematic nuclear magnetic resonance (NMR) and molecular dynamics (MD) studies, which together allow the untangling and explanation of many seemingly contradictory results present in the literature. Further, we identify still-debatable issues and open problems, as well as avenues for future studies, both theoretical and experimental.

Controlling terahertz sound propagation: some preliminary Inelastic X-Ray Scattering result

The control of sound propagation in materials via the design of their elastic properties is an exciting task at the forefront of Condensed Matter. It becomes especially compelling at terahertz frequencies, where phonons are the primary conveyors of heat flow. Despite the increasing focus on this goal, this field of research is still in its infancy; To achieve a few advances in this field, we performed several Inelastic X-Ray Scattering (IXS) measurements on elementary systems as dilute suspensions of nanoparticles (NPs) in liquids. We found that nanoparticles can effectively impact the sound propagation of the hosting liquid. We also explored the possibility of shaping terahertz sound propagation in a liquid upon confinement on quasi-unidimensional cavities. These results are here reviewed and discussed, and future research directions are finally outlined.

Dielectric Profile and Electromelting of a Monolayer of Water Confined in Graphene Slit Pore

A monolayer of water confined between two parallel graphene sheets exists in many different phases and exhibits fascinating dielectric properties that have been studied in experiments. In this work, we use molecular dynamics simulations to study how the dielectric properties of a confined monolayer of water is affected by its structure. We consider six of the popular nonpolarizable water models-SPC/E, SPC/Fw, TIP3P, TIP3P_M (modified), TIP4P-2005, and TIP4P-2005f-and find that the in-plane structure of the water molecules at ambient temperature and pressure is strongly dependent on the water model: all the 3-point water models considered here show square ice formation, whereas no such structural ordering is observed for the 4-point water models. This allows us to investigate the role of the in-plane structure of the water monolayer on its dielectric profile. Our simulations show an anomalous perpendicular dielectric constant compared to the bulk, and the models that do not exhibit ice formation show very different dielectric response along the channel width compared to models that exhibit square ice formation. We also demonstrate the occurrence of electromelting of the in-plane ordered water under the application of a perpendicular electric field and find that the critical field for electromelting strongly depends on the water model. Together, we have shown the dependence of confined water properties on the different water structures that it may take when sandwiched between bilayer graphene. These remarkable properties of confined water can be exploited in various nanofluidic devices, artificial ion channels, and molecular sieving.

Dimensionality dependence of the Kauzmann temperature: A case study using bulk and confined water

The Kauzmann temperature (T_K) of a supercooled liquid is defined as the temperature at which the liquid entropy becomes equal to that of the crystal. The excess entropy, the difference between liquid and crystal entropies, is routinely used as a measure of the configurational entropy, whose vanishing signals the thermodynamic glass transition. The existence of the thermodynamic glass transition is a widely studied subject, and of particular recent interest is the role of dimensionality in determining the presence of a glass transition at a finite temperature. The glass transition in water has been investigated intensely and is challenging as the experimental glass transition appears to occur at a temperature where the metastable liquid is strongly prone to crystallization and is not stable. To understand the dimensionality dependence of the Kauzmann temperature in water, we study computationally bulk water (three-dimensions), water confined in the slit pore of the graphene sheet (two-dimensions), and water confined in the pore of the carbon nanotube of chirality (11,11) having a diameter of 14.9 Å (one-dimension), which is the lowest diameter where amorphous water does not always crystallize into nanotube ice in the supercooled region. Using molecular dynamics simulations, we compute the entropy of water in bulk and under reduced dimensional nanoscale confinement to investigate the variation of the Kauzmann temperature with dimension. We obtain a value of T_K (133 K) for bulk water in good agreement with experiments [136 K (C. A. Angell, Science 319, 582-587 (2008) and K. Amann-Winkel et al., Proc. Natl. Acad. Sci. U. S. A. 110, 17720-17725 (2013)]. However, for confined water, in two-dimensions and one-dimension, we find that there is no finite temperature Kauzmann point (in other words, the Kauzmann temperature is 0 K). Analysis of the fluidicity factor, a measure of anharmonicity in the oscillation of normal modes, reveals that the Kauzmann temperature can also be computed from the difference in the fluidicity factor between amorphous and ice phases.

The Role of Interface Ions in the Control of Water Transport through a Carbon Nanotube

Controlling the water transport toward a given direction is still challenging, particularly due to thermal fluctuations of water motion at the nanoscale. While most of the previous works focus on the symmetric hydrophobic membrane systems, the role of the membrane in affecting the water transport remains largely unexplored. In this work, by using extensive molecular dynamics simulations, we find an interesting electropumping phenomenon, that is, the flowing counterions on an asymmetric hydrophobic-hydrophilic membrane can significantly drive the single-file water transport through a carbon nanotube, suggesting a nanometer water pump in a highly controllable fashion. The ion-water coupling motion in electric fields on the charged surface provides an indirect driving force for this pumping phenomenon. The water dynamics and thermal dynamics demonstrate a unique behavior with the change in electric fields, surface charge density, and even charge species. Particularly, due to the ion flux bifurcation for the positive and negative surfaces, the water dynamics such as the water flow, flux, and translocation time also exhibit similar asymmetry. Surprisingly, the positive surface charge induces an abnormal three-peak dipole distribution for the confined water and subsequent high flipping frequency. This can be attributed to the competition between the surface charge and interface water orientation on it. Our results indicate a new strategy to pump water through a nanochannel, making use of the counterion flowing on an asymmetric charged membrane, which are promising for future studies.

Confined Water: Structure, Dynamics, and Thermodynamics

Understanding the properties of strongly confined water is important for a variety of applications such as fast flow and desalination devices, voltage generation, flow sensing, and nanofluidics. Confined water also plays an important role in many biological processes such as flow through ion channels. Water in the bulk exhibits many unusual properties that arise primarily from the presence of a network of hydrogen bonds. Strong confinement in structures such as carbon nanotubes (CNTs) substantially modifies the structural, thermodynamic, and dynamic (both translational and orientational) properties of water by changing the structure of the hydrogen bond network. In this Account, we provide an overview of the behavior of water molecules confined inside CNTs and slit pores between graphene and graphene oxide (GO) sheets. Water molecules confined in narrow CNTs are arranged in a single file and exhibit solidlike ordering at room temperature due to strong hydrogen bonding between nearest-neighbor molecules. Although molecules constrained to move along a line are expected to exhibit single-file diffusion in contrast to normal Fickian diffusion, we show, from a combination of molecular dynamics simulations and analytic calculations, that water molecules confined in short and narrow CNTs with open ends exhibit Fickian diffusion because of their collective motion as a single unit due to strong hydrogen bonding. Confinement leads to strong anisotropy in the orientational relaxation of water molecules. The time scale of relaxation of the dipolar correlations of water molecules arranged in a single file becomes ultraslow, of the order of several nanoseconds, compared with the value of 2.5 ps for bulk water. In contrast, the relaxation of the vector that joins the two hydrogens in a water molecule is much faster, with a time scale of about 150 fs, which is about 10 times shorter than the corresponding time scale for bulk water. This is a rare example of confinement leading to a speedup of orientational dynamics. The orientational relaxation of confined water molecules proceeds by angular jumps between two locally stable states, making the relaxation qualitatively different from that expected in the diffusive limit. The spontaneous entry of water inside the hydrophobic cavity of CNTs is primarily driven by an increase in the rotational entropy of water molecules inside the cavity, arising from a reduction in the average number of hydrogen bonds attached to a water molecule. From simulations using a variety of water models, we demonstrate that the relatively simple SPC/E water model yields results in close agreement with those obtained from polarizable water models. Finally, we provide an account of the structure and thermodynamics of water confined in the slit pore between two GO sheets with both oxidized and reduced parts. We show that the potential of mean force for the oxidized part of GO sheets in the presence of water exhibits two local minima, one corresponding to a dry cavity and the other corresponding to a fully hydrated cavity. The coexistence of these two regimes provides permeation pathways for water in GO membranes.

Molecular dynamics simulations of electric field induced water flow inside a carbon nanotorus: a molecular cyclotron

A nano-flow is induced by applying gigahertz rotating electric fields (EFs) of different strengths and frequencies on a carbon nanotorus filled with water molecules, using molecular dynamics simulations.

Structure, dynamics and thermodynamics of single-file water under confinement: effects of polarizability of water molecules

Various structural, dynamic and thermodynamic properties of water molecules confined in single-wall carbon nanotubes are investigated using both polarizable and non-polarizable water models.

The hydrophobic force: measurements and methods

The hydrophobic force describes the attraction between water-hating molecules (and surfaces) that draws them together, causing aggregation, phase separation, protein folding and many other inherent physical phenomena.

Effect of cosolvents on nano-confined water: a molecular dynamics study

We present results from atomistic molecular dynamics simulations to characterize the effects of cosolvents, such as urea and guanidinium (Gdm) salts, on the water confined in hydrophobic carbon nanotubes. We observed complete drying of the nanotube interiors of diameter ranging from 8 to 17 Å in urea. In contrast, the water population within nanotube cores smaller than 12 Å remains unaffected in GdmCl solution, whereas larger nanotube interiors become partially dehydrated with prevailing presence of stable Gdm(+)-Gdm(+) dimers. The molecular arrangement and the lifetime inside the nanotube were found to be characteristics of a particular cosolvent. In both urea and GdmCl solutions, preferential cosolvent intrusion resulting in nanotube dehydration is driven by the stronger dispersion interaction of cosolvent than water with the nanotube. The partial drying of the hydrophobic core is attributed to guanidinium's better hydration and weaker self-association propensity compared to urea, as well as to its moderate ion-pairing with strongly hydrated chloride ions. The Gdm(+) induced dehydration varies with the charge density of counter-ions, as the presence of high charge-density sulfate ions impedes penetration of guanidinium, and consequent dehydration of the nanotube. These findings provide important insights into the effect of cosolvents on the nano-confined water in a hydrophobic environment.

Single-file water in nanopores

Water molecules confined to pores with sub-nanometre diameters form single-file hydrogen-bonded chains. In such nanoscale confinement, water has unusual physical properties that are exploited in biology and hold promise for a wide range of biomimetic and nanotechnological applications. The latter can be realized by carbon and boron nitride nanotubes which confine water in a relatively non-specific way and lend themselves to the study of intrinsic properties of single-file water. As a consequence of strong water-water hydrogen bonds, many characteristics of single-file water are conserved in biological and synthetic pores despite differences in their atomistic structures. Charge transport and orientational order in water chains depend sensitively on and are mainly determined by electrostatic effects. Thus, mimicking functions of biological pores with apolar pores and corresponding external fields gives insight into the structure-function relation of biological pores and allows the development of technical applications beyond the molecular devices found in living systems. In this Perspective, we revisit results for single-file water in apolar pores, and examine the similarities and the differences between these simple systems and water in more complex pores.

Harvesting energy from water flow over graphene

Water flow over carbon nanotubes has been shown to generate an induced voltage in the flow direction due to coupling of ions present in water with free charge carriers in the nanotubes. However, the induced voltages are typically of the order of a few millivolts, too small for significant power generation. Here we perform tests involving water flow with various molarities of hydrochloric acid (HCl) over few-layered graphene and report order of magnitude higher induced voltages for graphene as compared to nanotubes. The power generated by the flow of ∼0.6 M HCl solution at ∼0.01 m/sec was measured to be ∼85 nW for a ∼30 × 16 μm size graphene film, which equates to a power per unit area of ∼175 W/m(2). Molecular dynamics simulations indicate that the power generation is primarily caused by a net drift velocity of adsorbed Cl(-) ions on the continuous graphene film surface.