Catalytic Allylic C−H Acetoxylation and Benzoyloxylation via Suggested (η3-Allyl)palladium(IV) Intermediates

Palladium-Catalyzed Acetoxylation of γ-Dehydro-aryl-himachalene: The Synthesis of a Novel Allylic Acetoxylated Sesquiterpene and a π-Allyl Palladium(II) Complex

Allylic oxygenated derivatives of himachalenes are highly valued molecules due to their potential applications in perfumery, cosmetics, and pharmaceuticals. Previous attempts at catalyzed allylic oxidation of himachalenes led to the formation of a very stable η3-allyl palladium complex, preventing any further reaction development. Herein, we present the first successful palladium-catalyzed synthesis of a novel allylic acetoxylated derivative of himachalenes. This reaction was achieved by incorporating an aromatic ring into the substrate structure. The resulting intermediate complex was isolated and characterized using nuclear magnetic resonance spectroscopy and X-ray crystallography. Density functional theory (DFT) calculations were performed to compare the reactivity of the newly synthesized complex with previously reported ones. The theoretical results confirm that the introduction of an aromatic ring enhances the reactivity of the η³-allyl palladium complex, thereby facilitating the desired transformation.

Structural Reassignment of Covalent Organic Framework-Supported Palladium Species: Heterogenized Palladacycles as Efficient Catalysts for Sustainable C-H Activation

Recent decades have witnessed remarkable progress in ligand-promoted C-H activation with palladium catalysts. While a number of transformations have been achieved with a fairly broad substrate scope, the general requirements for high palladium loadings and enormous challenges in catalyst recycling severely limit the practical applications of C-H activation methodologies in organic synthesis. Herein, we incorporate N,C-ligand-chelated palladacycles into rigid, porous, and crystalline covalent organic frameworks for the C-H arylation of indole and pyrrole derivatives. These heterogeneous palladium catalysts exhibit superior stability and recyclability compared to their homogeneous counterparts. We not only produce several highly reactive palladacycles embedded on new framework supports to facilitate C-H activation/C-C bond-forming reactions but also reassign heterogenized palladium species on frameworks containing a benzaldehyde-derived imine moiety as imine-based palladacycles via comprehensive characterization. Our findings provide guidance for the rational design of framework-supported metallacycles in the development of heterogeneous transition-metal catalysis.

Chemo-, Regio- and Stereoselective Preparation of (Z)-2-Butene-1,4-Diol Monoesters via Pd-Catalyzed Decarboxylative Acyloxylation

(Z)-alkenes are useful synthons but thermodynamically less stable than their (E)-isomers and typically more difficult to prepare. The synthesis of 1,4-hetero-bifunctionalized (Z)-alkenes is particularly challenging due to the inherent regio- and stereoselectivity issues. Herein we demonstrate a general, chemoselective and direct synthesis of (Z)-2-butene-1,4-diol monoesters. The protocol operates within a Pd-catalyzed decarboxylative acyloxylation regime involving vinyl ethylene carbonates (VECs) and various carboxylic acids as the reaction partners under mild and operationally attractive conditions. The newly developed process allows access to a structurally diverse pool of (Z)-2-butene-1,4-diol monoesters in good yields and with excellent regio- and stereoselectivity. Various synthetic transformations of the obtained (Z)-2-butene-1,4-diol monoesters demonstrate how these synthons are of great use to rapidly diversify the portfolio of these formal desymmetrized (Z)-alkenes.

An N-heterocyclic carbene-based pincer system of palladium and its versatile reactivity under oxidizing conditions

NHC-based pincers (NHC = N-heterocyclic carbene) have been broadly employed as supporting platforms, and their palladium complexes have found many synthetic applications. However, previous studies mainly focused on the NHC pincers of palladium featuring an oxidation number of +II. In contrast, oxidation of these well-defined Pd(II) species and the study of their fundamental high-valent Pd chemistry remain largely undeveloped. In addition, from a perspective of PdII/PdIV catalysis, the reactivity and degradation of NHC pincers in catalytically relevant reactions have not been well understood. In this work, a series of Pd(II) complexes supported by a well-known NHC^Aryl^NHC pincer platform have been prepared. Their reactivity towards various oxidizing reagents, including halogen surrogates, electrophilic fluorine reagents, and alkyl/aryl halides, has been examined. In some cases, ambient-characterizable high-valent Pd NHCs, which have been scarcely reported, were obtained. The carbenes incorporated into the pincer framework proved to be effective spectator donors. In contrast, the central aryl moiety exhibits versatile reactivity and collapse pathways, allowing it to function either as a spectator or a non-innocent actor.

Palladium complexes containing NNN pincer type ligands and their activities in Suzuki-Miyaura cross coupling reaction

Five new NNN pincer-type ligands and their palladium complexes were successfully synthesised and characterised by FT-IR, ¹H NMR, ¹³C NMR, and UV-vis analyses. TEM analysis was used to observe the morphological character of the black residues obtained from the fourth cycle of the reusability test. Furthermore, suitable crystals of the N²,N⁶-bis(2-tert-butylphenyl)pyridine-2,6-dicarboxamide and its palladium complex were elucidated with the X-ray single crystal diffraction method. Both the ligand and its palladium complex crystallise in a monoclinic system with space group P2₁/c for the H₂L⁴ and C2/c for the palladium complex. The structure of the pincer ligand and its palladium complex were stabilised by intramolecular and intermolecular C-H⋅⋅⋅O, C-H⋅⋅⋅N, and N-H⋅⋅⋅N contacts. A Suzuki-Miyaura cross-coupling reaction between aryl halides and phenylboronic acid was used to assess the catalytic abilities of the palladium pincer complexes. All of the prepared complexes exhibited considerable catalytic activity. However, complexes 4 (Acetonitrile-N²,N⁶-bis(2-tert-butylphenyl)pyridine-2,6-dicarboxamidopalladium(II)) and 5 (Acetonitrile-N²,N⁶-bis(2-nitrophenyl)pyridine-2,6-dicarboxamidopalladium(II)) provided almost 100% conversion with nearly 100% yield in the reaction between 4-bromotoluene and phenylboronic acid. Furthermore, these active complexes catalysed the reaction of the sterically hindered and deactivated substrates (1-Bromo-4-izobutylbenzene and 2-bromo-6-methoxynaphthalene) with phenylboronic acid, and complete conversion and yields up to 100% were achieved in a short time with the 2-bromo-6-methoxynaphthalene.

Transannular Functionalization of Multiple C(sp3)-H Bonds of Tropane via an Alkene-Bridged Palladium(I) Dimer

This communication describes the Pd-catalyzed C(sp3)-H functionalization of a tropane derivative to generate products with functionalization at two (β/γ) or three (β/γ/β) different sites on the alicyclic amine core. These reactions proceed via an initial dehydrogenation to generate an alkene product that can react further to form a Pd(I) alkene-bridged dimer. Functionalization of this dimer affords β/γ/β-functionalized allylic arylation and allylic acetoxylation products.

Palladium-Catalyzed Organic Reactions Involving Hypervalent Iodine Reagents

The chemistry of polyvalent iodine compounds has piqued the interest of researchers due to their role as important and flexible reagents in synthetic organic chemistry, resulting in a broad variety of useful organic molecules. These chemicals have potential uses in various functionalization procedures due to their non-toxic and environmentally friendly properties. As they are also strong electrophiles and potent oxidizing agents, the use of hypervalent iodine reagents in palladium-catalyzed transformations has received a lot of attention in recent years. Extensive research has been conducted on the subject of C—H bond functionalization by Pd catalysis with hypervalent iodine reagents as oxidants. Furthermore, the iodine(III) reagent is now often used as an arylating agent in Pd-catalyzed C—H arylation or Heck-type cross-coupling processes. In this article, the recent advances in palladium-catalyzed oxidative cross-coupling reactions employing hypervalent iodine reagents are reviewed in detail.

Palladacycle-Catalyzed Regioselective Heck Reaction Using Diaryliodonium Triflates and Aryl Iodides

We describe a P-containing palladacycle-catalyzed regioselective Heck reaction of 2,3-dihydrofuran with diaryliodonium salts and aryl iodides to afford 2-aryl-2,5-dihydrofurans and 2-aryl-2,3-dihydrofurans, respectively, in good yields. Mechanistic studies revealed that the oxidative addition of diaryliodonium salts to palladacycles to form Pd(IV) species showed high chemoselectivity and that electron-rich aryl moieties were preferentially transferred to the Heck product. DFT calculations indicated that the regioselectivity-determining step is the reductive elimination reaction rather than the isomerization and reinsertion of Pd(IV)-hydride intermediates into the double bond.

Benzoquinone Cocatalyst Contributions to DAF/Pd(OAc)2-Catalyzed Aerobic Allylic Acetoxylation in the Absence and Presence of a Co(salophen) Cocatalyst

Palladium(II)-catalyzed allylic acetoxylation has been the focus of extensive development and investigation. Methods that use molecular oxygen (O₂) as the terminal oxidant typically benefit from the use of benzoquinone (BQ) and a transition-metal (TM) cocatalyst, such as Co(salophen), to support oxidation of Pd⁰ during catalytic turnover. We previously showed that Pd(OAc)₂ and 4,5-diazafluoren-9-one (DAF) as an ancillary ligand catalyze allylic oxidation with O₂ in the absence of cocatalysts. Herein, we show that BQ enhances DAF/Pd(OAc)₂ catalytic activity, nearly matching the performance of reactions that include both BQ and Co(salophen). These observations are complemented by mechanistic studies of DAF/Pd(OAc)₂ catalyst systems under three different oxidation conditions: (1) O₂ alone, (2) O₂ with cocatalytic BQ, and (3) O₂ with cocatalytic BQ and Co(salophen). The beneficial effect of BQ in the absence of Co(salophen) is traced to synergistic roles of O₂ and BQ, both of which are capable of oxidizing Pd⁰ to Pd^II The reaction of O₂ generates H₂O₂ as a byproduct, which can oxidize hydroquinone to quinone in the presence of Pd^II NMR spectroscopic studies, however, show that hydroquinone is the predominant redox state of the quinone cocatalyst in the absence of Co(salophen), while inclusion of Co(salophen) maintains oxidized quinone throughout the reaction, resulting in better reaction performance.

Hypervalent Iodine Reagents in Palladium-Catalyzed Oxidative Cross-Coupling Reactions

Hypervalent iodine compounds are valuable and versatile reagents in synthetic organic chemistry, generating a diverse array of useful organic molecules. Owing to their non-toxic and environmentally friendly features, these reagents find potential applications in various oxidative functionalization reactions. In recent years, the use of hypervalent iodine reagents in palladium-catalyzed transformations has been widely studied as they are strong electrophiles and powerful oxidizing agents. For instance, extensive work has been carried out in the field of C–H bond functionalization via Pd-catalysis using hypervalent iodine reagents as oxidants. In addition, nowadays, iodine(III) reagents have been frequently employed as arylating agents in Pd-catalyzed C–H arylation or Heck-type cross-coupling reactions. In this review, recent advancements in the area of palladium-catalyzed oxidative cross-coupling reactions using hypervalent iodine reagents are summarized in detail.

Cooperativity and serial ligand catalysis in an allylic amination reaction by Pd(ii)-bis-sulfoxide and Brønsted acids

In recent years, transition metal catalysts have been increasingly employed in conjunction with Brønsted acids under one-pot reaction conditions, opening up newer avenues for dual catalytic protocols. Under such dual catalytic conditions, the general premise of holding the native ligands on the catalyst in the same manner throughout the catalytic cycle becomes immediately questionable. We have invoked the likelihood of Serial Ligand Catalysis in an important intramolecular allylic amination of N-Boc (N-tert-butoxycarbonyl) protected homoallylic amine leading to an anti-oxazolidinone product. The reported reaction conditions employed (bis-sulfoxide)Pd(OAc)₂ and dibutyl phosphoric acid (DBPOH) as the catalysts and benzoquinone (BQ) as the oxidant. We used density functional theory computations at the B3LYP-D3 level of theory to examine a comprehensive set of ligand combinations around the Pd center so as to identify the energetically most preferred pathway. The key catalytic events consist of (i) a C-H activation at the allylic position in the catalyst-substrate complex [Pd(L)(L')₂(substrate)], leading to a (L)(L')Pd-π-allyl intermediate, and (ii) an intramolecular C-O bond formation between the carbonyl oxygen of the N-Boc amine and the allyl carbon. Interesting cooperativity between the catalysts in both these steps has been found, wherein the Pd(DBPO^-)₂(BS) species is involved in the C-H activation transition state and Pd(DBPO^-)(BQ) in the C-O bond formation step. The energetic advantage in swapping the bis-sulfoxide ligand on Pd with a benzoquinone upon moving from the first step to the second step confirms the significance of serial ligand catalysis in dual catalytic reactions.

Aerobic Acyloxylation of Allylic C-H Bonds Initiated by a Pd0 Precatalyst with 4,5-Diazafluoren-9-one as an Ancillary Ligand

Palladium-catalyzed allylic C-H oxidation has been widely studied, but most precedents use acetic acid as the coupling partner. In this study, a method compatible with diverse carboxylic acid partners has been developed. Use of a Pd⁰ precatalyst under aerobic reaction conditions leads to oxidation of Pd⁰ by O₂ in the presence of the desired carboxylic acid to generate a Pd^II dicarboxylate that promotes acyloxylation of the allylic C-H bond. Good-to-excellent yields are obtained with a roughly 1:1 ratio of the alkene and carboxylic acid reagents. Optimized reaction conditions employ 4,5-diazafluoren-9-one (DAF) as a ligand, in combination with a quinone/iron phthalocyanine cocatalyst system to support aerobic catalytic turnover.

Operando Spectroscopic and Kinetic Characterization of Aerobic Allylic C-H Acetoxylation Catalyzed by Pd(OAc)2/4,5-Diazafluoren-9-one

Allylic C-H acetoxylations are among the most widely studied palladium(II)-catalyzed C-H oxidation reactions. While the principal reaction steps are well established, key features of the catalytic mechanisms are poorly characterized, including the identity of the turnover-limiting step and the catalyst resting state. Here, we report a mechanistic study of aerobic allylic acetoxylation of allylbenzene with a catalyst system composed of Pd(OAc)₂ and 4,5-diazafluoren-9-one (DAF). The DAF ligand is unique in its ability to support aerobic catalytic turnover, even in the absence of benzoquinone or other co-catalysts. Herein, we describe operando spectroscopic analysis of the catalytic reaction using X-ray absorption and NMR spectroscopic methods that allow direct observation of the formation and decay of a palladium(I) species during the reaction. Kinetic studies reveal the presence of two distinct kinetic phases: (1) a burst phase, involving rapid formation of the allylic acetoxylation product and formation of the dimeric Pd^I complex [Pd^I(DAF)(OAc)]₂, followed by (2) a post-burst phase that coincides with evolution of the catalyst resting state from the Pd^I dimer into a π-allyl-Pd^II species. The data provide unprecedented insights into the role of ancillary ligands in supporting catalytic turnover with O₂ as the stoichiometric oxidant and establish an important foundation for the development of improved catalysts for allylic oxidation reactions.

Lithium Diisopropylamide Catalyzed Allylic C-H Bond Alkylation with Styrenes

Allylic substitution reactions, a well-established approach for new bond construction, often need transition-metal catalysts and stoichiometric amounts of organometallic reagents, strong bases, or oxidants. Lithium diisopropylamide (LDA), a widely used and commercially available Brønsted base, is herein reported to catalyze the allylic C-H bond addition of 1,3-diarylpropenes to styrenes. Preliminary mechanism studies have provided a solid structure of the π-allyllithium intermediate and revealed the unique catalytic roles of LDA and its conjugate acid diisopropylamine.

Palladium-Catalyzed Oxidative Borylation of Allylic C-H Bonds in Alkenes

This communication describes an efficient palladium pincer complex-catalyzed allylic C-H borylation of alkenes. The transformation exhibits high regio- and stereoselectivity with a variety of linear alkenes. A synthetically useful feature of this allylic C-H borylation method is that all allyl-Bpin products can be isolated in usually high yields. Preliminary mechanistic studies indicate that this C-H borylation reaction proceeds via Pd(IV) pincer complex intermediates.

Hypervalent Iodine Reagents in High Valent Transition Metal Chemistry

Over the last 20 years, high valent metal complexes have evolved from mere curiosities to being at the forefront of modern catalytic method development. This approach has enabled transformations complimentary to those possible via traditional manifolds, most prominently carbon-heteroatom bond formation. Key to the advancement of this chemistry has been the identification of oxidants that are capable of accessing these high oxidation state complexes. The oxidant has to be both powerful enough to achieve the desired oxidation as well as provide heteroatom ligands for transfer to the metal center; these heteroatoms are often subsequently transferred to the substrate via reductive elimination. Herein we will review the central role that hypervalent iodine reagents have played in this aspect, providing an ideal balance of versatile reactivity, heteroatom ligands, and mild reaction conditions. Furthermore, these reagents are environmentally benign, non-toxic, and relatively inexpensive compared to other inorganic oxidants. We will cover advancements in both catalysis and high valent complex isolation with a key focus on the subtle effects that oxidant choice can have on reaction outcome, as well as limitations of current reagents.

Palladium-catalyzed dehydrogenation of dihydro-heterocycles using isoprene as the hydrogen acceptor without oxidants

An efficient and general method for Pd-catalyzed dehydrogenative aromatization of dihydro-heteroatom compounds without external O₂ and H₂ is first described.

Palladium-catalyzed oxidative arylacetoxylation of alkenes: synthesis of indole and indoline derivatives

A method for the oxidative arylacetoxylation of alkenes has been developed to synthesize indole and indoline derivatives from readily accessible substrates.

Development of (quinolinyl)amido-based pincer palladium complexes: a robust and phosphine-free catalyst system for C–H arylation of benzothiazoles

Well-defined (quinolinyl)amido-pincer palladium complexes are developed and employed for the catalytic C–H bond arylation of benzothiazoles with aryl iodides, which can be recycled and reused for several cycles.

Catalytic Multisite-Selective Acetoxylation Reactions at sp2 vs sp3 C-H Bonds in Cyclic Olefins

The first Pd-catalyzed multisite-selective acetoxylation reactions are disclosed at an unactivated alkene sp² C-H bond versus secondary allylic sp³ C-H bond in cyclic olefins via the modulation of directing groups. The different directing groups overcome the key challenge in differentiating C-H bonds and provide a new controlling approach for site-specific C-H activation. A wide variety of substrates are readily acetoxylated under operationally simple conditions. Mechanistic studies suggest that different Pd (IV) intermediates were involved in the multisite-selective acetoxylation reactions.

Directing group assisted meta-hydroxylation by C-H activation

meta-Hydroxylated cores are ubiquitous in natural products. Herein, we disclose the first template assisted meta-hydroxylation reaction. Experimental and in silico studies helped us to gain valuable mechanistic insights, including the role of the hexafluoroisopropanol (HFIP) solvent, during C-H hydroxylation. The reactive intermediates, prior to the C-H activation, have been detected by spectroscopic techniques. Additionally, the C-O bond formation has been extended to meta-acetoxylation. The preparation of a phase II quinone reductase activity inducer and a resveratrol precursor illustrated the synthetic significance of the present strategy.

Synthesis of esters via sp3 C–H functionalisation

This review describes various methods for the synthesis of eleven classes of esters involving sp³ C–H functionalisation.

Palladium-catalyzed aerobic oxidative dehydrogenation of cyclohexenes to substituted arene derivatives

A palladium(II) catalyst system has been identified for aerobic dehydrogenation of substituted cyclohexenes to the corresponding arene derivatives. Use of sodium anthraquinone-2-sulfonate (AMS) as a cocatalyst enhances the product yields. A wide range of functional groups are tolerated in the reactions, and the scope and limitations of the method are described. The catalytic dehydrogenation of cyclohexenes is showcased in an efficient route to a phthalimide-based TRPA1 activity modulator.

Palladium-catalyzed intermolecular aminocarbonylation of alkenes: efficient access of β-amino acid derivatives

A novel palladium-catalyzed intermolecular aminocarbonylation of alkenes has been developed in which the employment of hypervalent iodine reagent can accelerate the intermolecular aminopalladation, which thus provides the successful catalytic transformation. The current transformation presents one of the most convenient methods to generate β-amino acid derivatives from simple alkenes.

Carbon-Hydrogen (C-H) Bond Activation at PdIV: A Frontier in C-H Functionalization Catalysis

The direct functionalization of carbon-hydrogen (C-H) bonds has emerged as a versatile strategy for the synthesis and derivatization of organic molecules. Among the methods for C-H bond activation, catalytic processes that utilize a PdII/PdIV redox cycle are increasingly common. The C-H activation step in most of these catalytic cycles is thought to occur at a PdII centre. However, a number of recent reports have suggested the feasibility of C-H cleavage occurring at PdIV complexes. Importantly, these latter processes often result in complementary reactivity and selectivity relative to analogous transformations at PdII. This Mini Review highlights proposed examples of C-H activation at PdIV centres. Applications of this transformation in catalysis as well as mechanistic details obtained from stoichiometric model studies are discussed. Furthermore, challenges and future perspectives for the field are reviewed.

Rhenium-catalyzed dehydrogenative olefination of C(sp3)–H bonds with hypervalent iodine(iii) reagents

A dehydrogenative olefination of C(sp³)–H bonds is developed by merging rhenium catalysis with an alanine-derived hypervalent iodine(iii) reagent.

O,N,N-Pincer ligand effects on oxidatively induced carbon–chlorine coupling reactions at palladium

The structural properties of a series of ONN-Pd(ii) chloride pincer complexes have been shown to influence the conversion to 4-chlorotoluene upon oxidation with di-p-tolyliodonium triflate.