Shewanella putrefaciens in a fuel-in-water emulsion from the Prestige oil spill

Differential degradation of petroleum hydrocarbons by Shewanella putrefaciens under aerobic and anaerobic conditions

The complexity of crude oil composition, combined with the fluctuating oxygen level in contaminated environments, poses challenges for the bioremediation of oil pollutants, because of compound-specific microbial degradation of petroleum hydrocarbons under certain conditions. As a result, facultative bacteria capable of breaking down petroleum hydrocarbons under both aerobic and anaerobic conditions are presumably effective, however, this hypothesis has not been directly tested. In the current investigation, Shewanella putrefaciens CN32, a facultative anaerobic bacterium, was used to degrade petroleum hydrocarbons aerobically (using O2 as an electron acceptor) and anaerobically (using Fe(III) as an electron acceptor). Under aerobic conditions, CN32 degraded more saturates (65.65 ± 0.01%) than aromatics (43.86 ± 0.03%), with the following order of degradation: dibenzofurans > n-alkanes > biphenyls > fluorenes > naphthalenes > alkylcyclohexanes > dibenzothiophenes > phenanthrenes. In contrast, under anaerobic conditions, CN32 exhibited a higher degradation of aromatics (53.94 ± 0.02%) than saturates (23.36 ± 0.01%), with the following order of degradation: dibenzofurans > fluorenes > biphenyls > naphthalenes > dibenzothiophenes > phenanthrenes > n-alkanes > alkylcyclohexanes. The upregulation of 4-hydroxy-3-polyprenylbenzoate decarboxylase (ubiD), which plays a crucial role in breaking down resistant aromatic compounds, was correlated with the anaerobic degradation of aromatics. At the molecular level, CN32 exhibited a higher efficiency in degrading n-alkanes with low and high carbon numbers relative to those with medium carbon chain lengths. In addition, the degradation of polycyclic aromatic hydrocarbons (PAHs) under both aerobic and anaerobic conditions became increasingly difficult with increased numbers of benzene rings and methyl groups. This study offers a potential solution for the development of targeted remediation of pollutants under oscillating redox conditions.

The Shewanella genus: ubiquitous organisms sustaining and preserving aquatic ecosystems

The Gram-negative Shewanella bacterial genus currently includes about 70 species of mostly aquatic γ­-proteobacteria, which were isolated around the globe in a multitude of environments such as surface freshwater and the deepest marine trenches. Their survival in such a wide range of ecological niches is due to their impressive physiological and respiratory versatility. Some strains are among the organisms with the highest number of respiratory systems, depending on a complex and rich metabolic network. Implicated in the recycling of organic and inorganic matter, they are important components of organism-rich oxic/anoxic interfaces, but they also belong to the microflora of a broad group of eukaryotes from metazoans to green algae. Examples of long-term biological interactions like mutualism or pathogeny have been described, although molecular determinants of such symbioses are still poorly understood. Some of these bacteria are key organisms for various biotechnological applications, especially the bioremediation of hydrocarbons and metallic pollutants. The natural ability of these prokaryotes to thrive and detoxify deleterious compounds explains their use in wastewater treatment, their use in energy generation by microbial fuel cells and their importance for resilience of aquatic ecosystems.

Simultaneous Application of Biosurfactant and Bioaugmentation with Rhamnolipid-Producing Shewanella for Enhanced Bioremediation of Oil-Polluted Soil

In the present study, a combined treatment strategy involving the addition of rhamnolipid, rhamnolipid-producing bacteria (Shewanella sp. BS4) and a native soil microbial community for the remediation of hydrocarbon-contaminated soil under pilot-scale conditions was adopted. The isolate BS4 (rhl+), demonstrating the highest emulsification activity and surface tension reduction efficiency, was identified based on 16 S rDNA sequencing as Shewanella sp. strain. Growth conditions for rhamnolipid production were optimized based on Central Composite Design (CCD) as 2.9% crude oil, a 54 × 106 CFU g−1 inoculation load of soil, a temperature of 30.5 °C, and a pH of 6.7. In situ bioremediation experiments, conducted using hydrocarbon-contaminated soil treated with the combination of rhamnolipid and rhamnolipid-producing bacteria, showed that the inoculated Shewanella sp. BS4, along with the indigenous soil microbial community, supported the highest hydrocarbon-degrading bacterial population and soil respiration activity, and this treatment resulted in 75.8% hydrocarbon removal efficiency, which was higher compared to contaminated soil devoid of any treatment.

Synthetic extreme environments: overlooked sources of potential biotechnologically relevant microorganisms

Synthetic extreme environments like carwash effluent tanks and drains are potential sources of biotechnologically important microorganisms and molecules which have, however, remained unexplored. Using culture‐ and molecular‐based methods, a total of 17 bacterial isolates belonging to the genera Shewanella, Proteus, Paenibacillus, Enterobacter and Citrobacter, Aeromonas, Pseudomonas and Pantoea were identified. Hydrocarbon utilization and enzyme production screening assays showed that Aeromonas sp. CAC11, Paenibacillus sp. CAC12 and Paenibacillus sp. CAC13 and Citrobacter sp. PCW7 were able to degrade benzanthracene, naphthalene and diesel oil, Paenibacillus sp. CAC12 and Paenibacillus sp. CAC13 could produce cellulase enzyme, while Proteus sp. BPS2, Pseudomonas sp. SAS8 and Proteus sp. CAL3 could produce lipase. GC‐MS analysis of bacterial secondary metabolites resulted in identification of 107 different compounds produced by Proteus sp. BPS2, Paenibacillus sp. CAC12, Pseudomonas sp. SAS8, Proteus sp. CAL3 and Paenibacillus sp. CAC13. Most of the compounds identified by both GC‐MS and LC‐MS have previously been determined to have antibacterial, antifungal and/or anticancer properties. Further, microbial metabolites which have previously been known to be produced only by plants or microorganisms found in natural extreme environments were also identified in this study. This research has revealed the immense bioresource potential of microorganisms inhabiting synthetic extreme environments.

The effect of oil spills on the bacterial diversity and catabolic function in coastal sediments: a case study on the Prestige oil spill

The accident of the Prestige oil tanker in 2002 contaminated approximately 900 km of the coastline along the northern Spanish shore, as well as parts of Portugal and France coast, with a mixture of heavy crude oil consisting of polycyclic aromatic hydrocarbons, alkanes, asphaltenes and resins. The capacity of the autochthonous bacterial communities to respond to the oil spill was assessed indirectly by determining the hydrocarbon profiles of weathered oil samples collected along the shore, as well as through isotope ratios of seawater-dissolved CO2, and directly by analyses of denaturing gradient gel electrophoresis fingerprints and 16S rRNA gene libraries. Overall, the results evidenced biodegradation of crude oil components mediated by natural bacterial communities, with a bias towards lighter and less substituted compounds. The changes observed in the Proteobacteria, the most abundant phylum in marine sediments, were related to the metabolic profiles of the sediment. The presence of crude oil in the supratidal and intertidal zones increased the abundance of Alpha- and Gammaproteobacteria, dominated by the groups Sphingomonadaceae, Rhodobacteraceae and Chromatiales, whilst Gamma- and Deltaproteobacteria were more relevant in subtidal zones. The phylum Actinobacteria, and particularly the genus Rhodococcus, was a key player in the microbial response to the spill, especially in the degradation of the alkane fraction. The addition of inorganic fertilizers enhanced total biodegradation rates, suggesting that, in these environments, nutrients were insufficient to support significant growth after the huge increase in carbon sources, as evidenced in other spills. The presence of bacterial communities able to respond to a massive oil input in this area was consistent with the important history of pollution of the region by crude oil.

Extracellular Electron Transfer Is a Bottleneck in the Microbiologically Influenced Corrosion of C1018 Carbon Steel by the Biofilm of Sulfate-Reducing Bacterium Desulfovibrio vulgaris

Carbon steels are widely used in the oil and gas industry from downhole tubing to transport trunk lines. Microbes form biofilms, some of which cause the so-called microbiologically influenced corrosion (MIC) of carbon steels. MIC by sulfate reducing bacteria (SRB) is often a leading cause in MIC failures. Electrogenic SRB sessile cells harvest extracellular electrons from elemental iron oxidation for energy production in their metabolism. A previous study suggested that electron mediators riboflavin and flavin adenine dinucleotide (FAD) both accelerated the MIC of 304 stainless steel by the Desulfovibrio vulgaris biofilm that is a corrosive SRB biofilm. Compared with stainless steels, carbon steels are usually far more prone to SRB attacks because SRB biofilms form much denser biofilms on carbon steel surfaces with a sessile cell density that is two orders of magnitude higher. In this work, C1018 carbon steel coupons were used in tests of MIC by D. vulgaris with and without an electron mediator. Experimental weight loss and pit depth data conclusively confirmed that both riboflavin and FAD were able to accelerate D. vulgaris attack against the carbon steel considerably. It has important implications in MIC failure analysis and MIC mitigation in the oil and gas industry.

Cytometric patterns reveal growth states of Shewanella putrefaciens

Bacterial growth is often difficult to estimate beyond classical cultivation approaches. Low cell numbers, particles or coloured and dense media may disturb reliable growth assessment. Further difficulties appear when cells are attached to surfaces and detachment is incomplete.

Therefore, flow cytometry was tested and used for analysis of bacterial growth on the single-cell level. Shewanella putrefaciens was cultivated as a model organism in planktonic or biofilm culture. Materials of smooth and rough surfaces were used for biofilm cultivation. Both aerobic and anaerobic as well as feast and famine conditions were applied. Visualization of growth was also done using Environmental Scanning and Phase Contrast Microscopy. Bioinformatic tools were applied for data interpretation.

Cytometric proliferation patterns based on distributions of DNA contents per cell corresponded distinctly to the various lifestyles, electron acceptors and substrates tested. Therefore, cell cycling profiles of S. putrefaciens were found to mirror growth conditions.

The cytometric patterns were consistently detectable with exception of some biofilm types whose resolution remained challenging. Corresponding heat maps proved to be useful for clear visualization of growth behaviour under all tested conditions. Therefore, flow cytometry in combination with bioinformatic tools proved to be powerful means to determine various growth states of S. putrefaciens, even in constrained environments. The approach is universal and will also be applicable for other bacterial species.

Diversity of Microbial Communities in Production and Injection Waters of Algerian Oilfields Revealed by 16S rRNA Gene Amplicon 454 Pyrosequencing

The microorganisms inhabiting many petroleum reservoirs are multi-extremophiles capable of surviving in environments with high temperature, pressure and salinity. Their activity influences oil quality and they are an important reservoir of enzymes of industrial interest. To study these microbial assemblages and to assess any modifications that may be caused by industrial practices, the bacterial and archaeal communities in waters from four Algerian oilfields were described and compared. Three different types of samples were analyzed: production waters from flooded wells, production waters from non-flooded wells and injection waters used for flooding (water-bearing formations). Microbial communities of production and injection waters appeared to be significantly different. From a quantitative point of view, injection waters harbored roughly ten times more microbial cells than production waters. Bacteria dominated in injection waters, while Archaea dominated in production waters. Statistical analysis based on the relative abundance and bacterial community composition (BCC) revealed significant differences between production and injection waters at both OTUs0.03 and phylum level. However, no significant difference was found between production waters from flooded and non-flooded wells, suggesting that most of the microorganisms introduced by the injection waters were unable to survive in the production waters. Furthermore, a Venn diagram generated to compare the BCC of production and injection waters of one flooded well revealed only 4% of shared bacterial OTUs. Phylogenetic analysis of bacterial sequences indicated that Alpha-, Beta- and Gammaproteobacteria were the main classes in most of the water samples. Archaeal sequences were only obtained from production wells and each well had a unique archaeal community composition, mainly belonging to Methanobacteria, Methanomicrobia, Thermoprotei and Halobacteria classes. Many of the bacterial genera retrieved had already been reported as degraders of complex organic molecules and pollutants. Nevertheless, a large number of unclassified bacterial and archaeal sequences were found in the analyzed samples, indicating that subsurface waters in oilfields could harbor new and still-non-described microbial species.

Dynamic changes in the structure of microbial communities in Baltic Sea coastal seawater microcosms modified by crude oil, shale oil or diesel fuel

The coastal waters of the Baltic Sea are constantly threatened by oil spills, due to the extensive transportation of oil products across the sea. To characterise the hydrocarbon-degrading bacterial community of this marine area, microcosm experiments on diesel fuel, crude oil and shale oil were performed. Analysis of these microcosms, using alkane monooxygenase (alkB) and 16S rRNA marker genes in PCR-DGGE experiments, demonstrated that substrate type and concentration strongly influence species composition and the occurrence of alkB genes in respective oil degrading bacterial communities. Gammaproteobacteria (particularly the genus Pseudomonas) and Alphaproteobacteria were dominant in all microcosms treated with oils. All alkB genes carried by bacterial isolates (40 strains), and 8 of the 11 major DGGE bands from the microcosms, had more than 95% sequence identity with the alkB genes of Pseudomonas fluorescens. However, the closest relatives of the majority of sequences (54 sequences from 79) of the alkB gene library from initially collected seawater DNA were Actinobacteria. alkB gene expression, induced by hexadecane, was recorded in isolated bacterial strains. Thus, complementary culture dependent and independent methods provided a more accurate picture about the complex seawater microbial communities of the Baltic Sea.

Metalworking fluids biodiversity characterization

AIMS

Hypersensitivity pneumonitis of machinists associated with metalworking fluids (MWF) was recently linked to Mycobacterium immunogenum. In addition to Mycobacterium, impacts of continuous and massive contact to other micro-organisms, such as Pseudomonas, were little studied. This report intended to quantify and characterize the microbial load of 44 in-use MWF.

METHODS AND RESULTS

The main biodiversity of MWF was assessed using cultural methods, quantitative PCR (qPCR) and denaturing gradient gel electrophoresis (DGGE). Total bacteria concentrations ranged from undetectable to 10(9) 16S rRNA gene copies per millilitre. Concentrations obtained by qPCR were up to five orders of magnitude higher than by culture, suggesting that MWF contamination is generally underestimated. Two samples showed high concentrations of Myco. immunogenum (1.55 x 10(7) and 3.49 x 10(5) 16S rRNA gene copies per millilitre). The overall biodiversity was low, as observed by culture and DGGE, and was comparable to data found in the literature. Pseudomonas pseudoalcaligenes was by far the main bacteria found in MWF samples (33 out of 44), followed by Ochrobactrum anthropi (32 out of 44). There was no significant relationship between the biodiversity profiles and the kind of MWF or equipment used, making it difficult to predict which micro-organisms will colonize each particular MWF.

CONCLUSIONS

Very high concentrations of bacteria were found in most MWF studied and limited biodiversities were observed. Many species of micro-organisms were retrieved from MWF samples, but they were mostly colonized by Pseudomonas pseudoalcaligenes and Ochrobactrum anthropi.

SIGNIFICANCE AND IMPACT OF THE STUDY

The major micro-organisms observed or recovered in this study from in-use MWF were present in very high concentrations, and thus further studies are needed to confirm their role in workers' respiratory disorders or health-related problems.

Skin and soft tissue infections (patera foot) in immigrants, Spain

An unusual skin and soft tissue infection of the lower limbs has been observed in immigrants from sub-Saharan Africa who cross the Atlantic Ocean crowded on small fishing boats (pateras). Response to conventional treatment is usually poor. Extreme extrinsic factors (including new pathogens) may contribute to the etiology of the infection and its pathogenesis.

Composting and vermicomposting experiences in the treatment and bioconversion of asphaltens from the Prestige oil spill

This work illustrates the effectiveness of composting and vermicomposting in degrading fuel-in-water emulsions from oil spills (chapapote), and the isolation of potentially useful microorganisms for its biodegradation. Firstly, an alternative to the biodegradation of asphaltens from the Prestige oil spill (still present in some chapapote rafts in the Cantabrian coast) by means of the application of composting techniques to a microbial partnership acclimated to fuel-oil is offered. Our aim is that, after a relatively short period of time, the microorganisms can obtain its source of carbon and energy from asphaltens. The addition of metabolic co-substrates, like cow bed and potato peelings, allows the fragmentation of complex compounds into smaller structures, susceptible to further degradation. Afterwards, a maturation of the compost by means of a treatment with earthworms (Eisenia foetida) is necessary. Thus, through the vermicomposting it will be possible to obtain a valued product, useful in the processes of ground amendment, with little presence of asphaltens and occluded polycyclic aromatic hydrocarbons, rich in humus, and with an important bacterial flora of Bacillus genera, so that it can be typical of co-activators and accelerating products in composting processes. Along with this article, we show some parameters that control the evolution of the compost products (evolved gases, acidity, temperature and humidity); the chemical and microbiological analytical results; and the germination assays of vermicomposting. Results reveal that by using microorganisms living in either earthworm intestines (Stenotrophomonas maltophilia) or vermiculture substrates (Scedosporium apiospermium), it is possible to degrade and to eliminate the polycyclic asphaltens into CO(2) and H(2)O, helped by evaporation, dissolution and/or photo-oxidation processes. The obtained end product has contents of interesting vegetal nutrients and, mainly, it displays very high germination indices.