Hydrolysis of 2-Hydroxyethyl Methacrylate in Concentrated Aqueous Solutions

Surface ion-imprinted brewer's spent grain with low template loading for selective uranyl ions adsorption from simulated wastewater

Efficient removal of uranyl ions from wastewater requires excellent selectivity of the adsorbents. Herein, we report a new strategy using a high monomer/template molar ratio of 500:1 to prepare surface ion-imprinted brewer's spent grain (IIP-BSG) for selective U(VI) removal using binary functional monomers (2-hydroxyethyl methacrylate and diethyl vinylphosphonate) with high site accessibility and easy template removal. IIP-BSG exhibits a maximum U(VI) adsorption capacity of 165.7 mg/g, a high selectivity toward U(VI) in the presence of an excess amount of Eu(III) (Eu/U molar ratio = 20), a good tolerance of salinity, and a high reusability. In addition, mechanism studies have revealed electrostatic interaction and a coordination of uranyl ions by carboxyl and phosphoryl groups, the predominant contribution of high-energy (specific) sites during selective adsorption, and internal mass transfer as the rate-controlling step of U(VI) adsorption. Furthermore, IIP-BSG shows great potentials to separate U(VI) from lanthanides in simulated nuclear wastewater (pH₀ = 3.5) and selectively concentrate U(VI) from simulated mine water (pH₀ = 7.1). This study proves that the ion-imprinting effect can be achieved using a very low template amount with reduced production cost and secondary pollution, which benefits large-scale promotion of the ion-imprinted materials for selective uranyl ions removal.

Surfactant-free synthesis of layered double hydroxide-armored latex particles

MgAl-layered double hydroxide (LDH)-armored latexes were produced by Pickering emulsion polymerization of styrene using 2-hydroxyethyl methacrylate (HEMA) and methyl methacrylate (MMA) as auxiliary comonomers.

Exploring the Long-Term Hydrolytic Behavior of Zwitterionic Polymethacrylates and Polymethacrylamides

The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) ("sulfobetaine methacrylate"), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) ("sulfobetaine methacrylamide") as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile.

Degradation-stage effect of self-etching primer on dentin bond durability

It is well-known that self-etching primers can be altered. However, the effects from altered primers on the dentin bond durability have yet to be thoroughly identified. In this study, we examined the effects from 5 altered Liquid A primers in different stages of degradation-where 2-hydroxyethylmethacrylate (HEMA) and 10-methacryloyloxydecyl dihydrogen phosphate (MDP), used in Liquid A primers, were altered by the hydrolysis of the methacryloxy ester portion in the HEMA and MDP-on the hybrid layer's quality and dentin bond durability. The hypothesis was that degradation stages of altered Liquid A primers have no effect on the hybrid layer's quality and on dentin bond durability. Bond strengths, obtained after thermo-cycling, were strongly dependent on the degradation stage of the altered Liquid A primer. Alterations of self-etching primers reduced dentin bond durability and decreased the created hybrid layer's quality.

Systematic review of the chemical composition of contemporary dental adhesives

Dental adhesives are designed to bond composite resins to enamel and dentin. Their chemical formulation determines to a large extent their adhesive performance in clinic. Irrespective of the number of bottles, an adhesive system typically contains resin monomers, curing initiators, inhibitors or stabilizers, solvents and sometimes inorganic filler. Each one of these components has a specific function. The aim of this article is to systematically review the ingredients commonly used in current dental adhesives as well as the properties of these ingredients. This paper includes an extensive table with the chemical formulation of contemporary dental adhesives.

Effects of storage time and temperature on the properties of two self-etching systems

OBJECTIVES

To evaluate the micro-shear bond strength to enamel and dentin, pH and hardness of two self-etching adhesives over a period of 60 weeks storage at different temperatures.

MATERIALS AND METHODS

Two self-etching systems, an all-in-one adhesive, Clearfil Tri-S Bond (TS) and a two-step adhesive, Clearfil SE Bond (SE) were used in this study (both by Kuraray Medical, Osaka, Japan). Their micro-shear bond strengths to enamel and dentin were measured. The materials were then stored at 4, 23 or 37 degrees C. Their bond strengths were measured again after 1, 4, 16 and 60 weeks and compared to the base line. The nano-indentation hardness of the polymerized bonding, pH of SE primer and TS were also measured at the baseline and after 60 weeks of storage at three different temperatures. Bond-strength and hardness data were analyzed using ANOVA and post hoc tests at the significance level of 0.05.

RESULTS

Two-way ANOVA analysis showed that both storage conditions and material type had significant effects on bond strength to enamel or dentin but the interactions of these factors were not significant for any of the substrates. One-way ANOVA post hoc tests revealed that the bond strength of adhesives stored at 37 degrees C significantly decreased during the storage period; with the earliest significant decreases observed at 4 weeks for TS and at 16 weeks for SE. After 60 weeks of storage, the hardness obtained for SE bonding resin was not significantly different with that at the baseline for 4, 23 and 37 degrees C groups, but there was a significant decrease observed in hardness for TS stored at 37 degrees C, compared to that at the baseline. The pH of both self-etching materials decreased when they were stored at 37 degrees C.

CONCLUSION

Storage time and temperature significantly affected the bond strength of both materials through the time dependent hydrolysis and other changes that are likely to occur in the water-containing self-etching agents at high temperatures.

Hydrolysis of functional monomers in a single-bottle self-etching primer--correlation of 13C NMR and TEM findings

Self-etching primers/adhesives that combine acidic methacrylate monomers with water in a single bottle are hydrolytically unstable and require refrigeration to extend their shelf-lives. This study tested the null hypothesis that one year of intermittent refrigeration of a 4-MET-containing simplified self-etching primer does not result in hydrolytic changes that are identifiable by transmission electron microscopy and (13)C NMR spectroscopy. Human dentin was bonded with UniFil Bond immediately after being unpacked, or after one year of intermittent refrigeration at 4 degrees C. Fresh and aged primers were analyzed by NMR for chemical changes. Ultrastructural observations indicated that there was an augmentation in etching capacity of the aged adhesive that was not accompanied by resin infiltration or effective polymerization. New NMR peaks detected from the aged ethanol-based primer confirmed that degradation occurred initially via esterification with ethanol, followed by hydrolysis of both ester groups in the 4-MET. Hydrolysis of functional methacrylate monomers occurs despite intermittent refrigeration.