Incidence of C-shaped root canal systems in mandibular second molars in the native Chinese population by analysis of clinical methods

A CBCT based cross sectional study on the prevalence and anatomical feature of C shaped molar among Jordanian

The prevalence and anatomical features of C-Shaped Mandibular Second Molars (MSMs) are rarely studied in Jordanian sub-population. This study then took a part to evaluate the prevalence of C-shaped in MSMs using cone-beam computed tomography (CBCT) in the Jordanian sub-population. It used a cross-sectional design and three thousand scans collected over eight years between 2011 and 2019. The data were then reviewed for whether they were fully formed of MSMs. A total of 2037 cases that had 2845 MSMs were evaluated to identify C-shaped canals at coronal, middle, and apical sites. An oblique slicing module perpendicular to the long axis of MSMs was used to evaluate the teeth. The type and frequency of C-shaped canals, as well as the correlations between sex and side (right/left) and between sex and groove direction (buccal/lingual) were measured using the chi-square test on SPSS software at the significance level of 95%. A total of 342 teeth of 243 patients were C-shaped molars, which comprised 12% of the patient's teeth and 99 of them as a bilateral C-shaped canal with mean age of 40 years and sex ratio of 2:1 between female and male. With the limitations of this study, the lingual groove and type 3 were the most common properties of MSM. Besides, the Jordanian population mostly had C-shaped canals.

Variations of root and canal morphology of mandibular second molars in Chinese individuals: a cone-beam computed tomography study

BACKGROUND

The mandibular second molars demonstrate variations on root and canal morphology. The aim of this study was to investigate all the root canal morphology of mandibular second molars and analyze the morphological variations in patients by gender and age in a Chinese population use CBCT imaging.

METHODS

Cone-beam computed tomographic images of 1200 bilateral mandibular second molars were obtained from 600 patients (300 females and 300 males) who required a preoperative assessment for implant surgery, surgical removal of impacted teeth, orthodontic treatment, surgery of maxillofacial tumour and cysts or LeFort I osteotomy. CBCT images were divided into 5 groups according to age: "15-24 years", "25-34 years", "35-44 years", "45-54 years" and "≥ 55 years"; and 2 groups by gender: "females" and "males". The following information were recorded: the number of roots and canals and their morphology, the frequency and configuration of C-shaped canals by gender, age and position (left and right). The chi-square test was used to analyse differences between groups. P value of < 0.05 was considered statistically significant.

RESULTS

Of the 1200 teeth, 61% had two separate roots located mesiodistally, 35.6% had one C-shaped root. The 45.3% teeth had three canals in two-rooted mandibular second molars. The mesial root showed a Vertucci type II configuration in 28.9% cases followed by type IV(24.4%). While the distal root showed a significant higher prevalence of type I configuration in 95.6%. In the examined 1200 teeth, 430 teeth (35.8%) had C-shaped root canals. The prevalence of C-shaped root canal systems was significantly higher in females (42.5%) than in males (29.1%) (P = 0.000), and did not differ with age (P = 0.126). The 80.4% C-shaped canals were bilateral (P = 0.000) and did not differ with side (left and right) (P = 0.758).

CONCLUSIONS

The most commonly observed root morphology for the mandibular second molars was 2 separate roots with three canals.The prevalence of C-shaped root canal is 35.8% and is more higher in females than in males.

Root and Root Canal Configuration Characterization Using Microcomputed Tomography: A Systematic Review

This systematic review’s objective was to conduct a complete analysis of the literature on the root canal morphology using advanced micro-computed tomography. The electronic web databases PubMed, Scopus, and Cochrane were examined for research papers concerning the chosen keywords, evaluating the root canal morphology using Micro-CT, published up to 2021. The articles were searched using MeSH keywords and searched digitally on four specialty journal websites. DARE2 extended (Database of Attributes of Reviews of Effects) was used to assess bias risk. The information was gathered from 18 published studies that strictly met the criteria for inclusion. In the included studies, a total of 6696 samples were studied. The studies were conducted on either maxillary (n-2222) or mandibular teeth (n-3760), permanent anteriors (n-625), and Third molars (n-89). To scan samples, a Scanco Medical machine in was used in 10 studies, Bruker Micro-CT in 34, and seven other machines were utilized in the rest. Bruker Micro-CT software from Kontich, Belgium, VG-Studio Max 2.2 software from Volume Graphics, Heidelberg, Germany, was the most commonly used software. The minimum Voxel size (resolution) adopted in the included studies was 11.6 µm. However, 60 µm was the maximum. Most studies classified the root canal morphology using Vertucci’s classification system (n-16) and the four-digit system (n-6).

Effectiveness of various endodontic systems in treating teeth with C-shaped root canals

Introduction — C-shaped configuration is amongst the most complicated root canal varieties requiring additional effort for successful endodontic treatment. The goal of this study was the laboratory comparison of the endodontic treatment efficiencies via XP-endo vs. Gentlefile systems for the teeth with C-shaped root canals. Material and Methods — In laboratory settings, 36 teeth with established C-shaped configuration, extracted for medical reasons (24 mandibular premolars and 12 mandibular second molars), underwent the root canal treatment by XP-endo (XP) and Gentlefile (GF) systems. Treatment quality was evaluated on the basis of dye penetration tests and examination of root dentinal surface with a scanning electron microscope. The significance of differences between the groups was assessed via Mann-Whitney U test. Results — For GF instruments, the average size of stained area in the apical third of teeth was 3.33±2.73%, while in the coronal third it amounted to 13.49±13.58%. The results of using the XP instruments demonstrated the average size of stained area in the apical third equal to 15.45±12.48%, while in the coronal third it was 37.30±14.06%. The scanning electron microscopy revealed a rougher surface of dentin and the remnants of stained layer in root canals treated with GF system. Conclusion — Thus, XP instruments exhibited a better treatment quality compared with GF system. The obtained data may justify the choice of instruments for endodontic teeth treatment in case of an intricate root canal system.

Estimation Accuracy of Root Canal Curvatures from Different Dental Diagnostic Imaging Techniques: An In Vitro Experimental Study

In clinical endodontics, preoperative estimation of root canal curvature is crucial regarding the prevention of iatrogenic errors. Reproduction of the two-dimensional radiographic images causes certain proximal view curvatures not seen. Therefore, the present study is aimed at investigating the degree of root canal curvature identified in different radiographic views. A total of 60 human permanent single-rooted teeth with varying degrees of curvature were selected. The root canal curvature for each tooth was measured on cone-beam computed tomography (CBCT) images (clinical view), standard digital periapical view (0° angle), digital periapical horizontal parallax view (30° angle), and digital periapical proximal view (0° angle), by using the Schneider method. No statistically significant difference was found in the degree of curvatures estimated on CBCT images and standard digital periapical view (0° angle) in the same tooth. The results revealed a significant difference between the proximal view and the other three groups (p < 0.05). There was no significant difference in this respect between the horizontal parallax view (30° angle), clinical view (CBCT images), and standard digital periapical view (p > 0.05). Proximal view curvatures cannot be predicted or estimated only from examining a clinical view radiograph. A horizontal parallax view (30° angle) is highly recommended as specific guidelines on how to estimate root canal curvature in case difficulty assessment protocols.

Deep-learning for predicting C-shaped canals in mandibular second molars on panoramic radiographs

OBJECTIVE

The aim of this study was to evaluate the use of a convolutional neural network (CNN) system for predicting C-shaped canals in mandibular second molars on panoramic radiographs.

METHODS

Panoramic and cone beam CT (CBCT) images obtained from June 2018 to May 2020 were screened and 1020 patients were selected. Our dataset of 2040 sound mandibular second molars comprised 887 C-shaped canals and 1153 non-C-shaped canals. To confirm the presence of a C-shaped canal, CBCT images were analyzed by a radiologist and set as the gold standard. A CNN-based deep-learning model for predicting C-shaped canals was built using Xception. The training and test sets were set to 80 to 20%, respectively. Diagnostic performance was evaluated using accuracy, sensitivity, specificity, and precision. Receiver-operating characteristics (ROC) curves were drawn, and the area under the curve (AUC) values were calculated. Further, gradient-weighted class activation maps (Grad-CAM) were generated to localize the anatomy that contributed to the predictions.

RESULTS

The accuracy, sensitivity, specificity, and precision of the CNN model were 95.1, 92.7, 97.0, and 95.9%, respectively. Grad-CAM analysis showed that the CNN model mainly identified root canal shapes converging into the apex to predict the C-shaped canals, while the root furcation was predominantly used for predicting the non-C-shaped canals.

CONCLUSIONS

The deep-learning system had significant accuracy in predicting C-shaped canals of mandibular second molars on panoramic radiographs.

The efficacy of five different techniques in identifying C-shaped canals in mandibular molars

Information regarding the canal anatomy especially in complex cases such as C-shaped canals is essential for a successful treatment. In this study, five different methods for identification of C-shaped canal configuration were compared. 108 extracted mandibular molars with fused roots were studied. Radiographic evaluation was carried out using periapical radiography and CBCT. After access cavity preparation, all specimens were evaluated by direct visual examination and then under dental operating microscope. Finally, the actual anatomy of each sample was determined by preparing horizontal cross sections of the roots (1 mm thick) and examining them under stereomicroscope as the gold standard. Among the techniques used, high-resolution CBCT manifested the highest accuracy, whereas periapical radiography had the lowest. All approaches can be useful in reaching a correct diagnosis. CBCT, especially the low-resolution modality, is an effective technique in the diagnosis of C-shaped anatomy.

Mandibular molar C-shaped root canals in 5th millennium BC China

OBJECTIVE

The aim of this study was to analyze the occurrence and variations in C-shaped canals in ancient Chinese teeth and compare the differences of these features between ancient and age-matched modern populations.

DESIGN

Approximately 5000-year-old craniofacial bone remains were collected from the fossils of 38 individuals (total: 68 mandibular second molars) excavated from the Jiaojia site. The control group comprised of an equal number of randomly selected modern samples. We used cone-beam computed tomography to scan the mandible along the apex-crown axis and analyzed the canal morphology, based on Fan's categorization criterion, at 2 mm, 5 mm, and 8 mm to the apical level. Grooves on the lingual and buccal sides were also recorded.

RESULTS

The proportion of C-shaped roots among ancient samples on the left and right sides were 48.57 % (17/35 teeth) and 54.55 % (18/33 teeth), respectively, and 51.47 % (35/68 teeth) in the total sample. Conversely, in the control group, 44.12 % (15/34) and 38.24 % (13/34) occurred on the left and right sides, respectively, and 41.18 % (28/68) in the total sample. Among the C-shaped canals from the Jiaojia site samples, the classification type changed between two adjacent levels in 84.31 % of samples. Approximately 35 (51.5 %) teeth had a fused root, 20 (29.41 %) had one shallow buccal and one deep lingual groove. The occurrence of C-shape variation was not significantly correlated with time (p＞0.05).

CONCLUSIONS

This study identified a high rate of C-shaped root canals among individuals of Jiaojia who lived approximately 5000 years ago.

Racial predilection of C-shaped canal configuration in the mandibular second molar

Aim:

The purpose of this article is to determine the racial predilection of C-shaped canal configuration in a mandibular second molar.

Background:

Unusual root canal anatomy always poses a diagnostic and treatment challenge. Identification of such variation is important for the success of root canal treatment outcome. C-shaped canal configuration is such an aberrant morphology of molar teeth that vary in different population and is commonly seen in a mandibular second molar. Thus, knowledge of racial predilection of C-shaped canal configuration in different population for early diagnosis is obligatory.

Materials and Methods:

An exhaustive search was undertaken to identify published research articles related to C-shaped canal configuration in mandibular second molars. Forty-three research articles were analyzed which included 12,481 mandibular second molars. Chi-square test using value of P < 0.05 was performed to assess the statistical significance of this anomalous anatomic variation among the different population.

Results:

Statistical test revealed a significant variation between the Asian and nonAsian population. The highest incidence of racial predilection was observed in China (Asia) with 93.1%, and the minimum was observed in America with 2.7%.

Conclusion:

This research reported that racial predilection of C-shaped canal configuration in mandibular second molar varies significantly.

C-shaped root canals of mandibular second molars in a Korean population: a CBCT analysis

Objectives

The purpose of this study was to investigate the C-shaped root canal anatomy of mandibular second molars in a Korean population.

Materials and Methods

A total of 542 teeth were evaluated using cone-beam computed tomography (CBCT). The canal shapes were classified according to a modified version of Melton's method at the level where the pulp chamber floor became discernible.

Results

Of the 542 mandibular second molars, 215 (39.8%) had C-shaped canals, 330 (53%) had 3 canals, 17 (3.3%) had 2 canals, 12 (2.2%) had 4 canals, and 8 (1.7%) had 1 canal. The prevalence of C-shaped canals was 47.8% in females and 28.4% in males. Seventy-seven percent of the C-shaped canals showed a bilateral appearance. The prevalence of C-shaped canals showed no difference according to age or tooth position. Most teeth with a C-shaped canal system presented Melton's type II (45.6%) and type III (32.1%) configurations.

Conclusions

There was a high prevalence of C-shaped canals in the mandibular second molars of the Korean population studied. CBCT is expected to be useful for endodontic diagnosis and treatment planning of mandibular second molars.

C-shaped root canal configuration: A review of literature

The aim is to review and discuss the etiology, incidence, anatomic features, classification, diagnosis and management of the C-shaped canal configuration. C-shaped canal configuration is a variation that has a racial predilection and is commonly seen in mandibular second molars. The intricacies present in this variation of canal morphology can pose a challenge to the clinician during negotiation, debridement and obturation. Manual and electronic searches of literature were performed from 1979 to 2012, in Pub Med by crossing the keywords: C-shaped canals, mandibular second molar, mandibular first premolar, root canal morphology. Knowledge of the C-shaped canal configuration is essential to achieve success in endodontic therapy. Radiographic and clinical diagnoses can aid in identification and negotiation of the fan-shaped areas and intricacies of the C-shaped anatomy. Effective management of this anomalous canal configuration can be achieved with rotary and hand instrumentation assisted with sonics and ultrasonics. Modifications in the obturation techniques will ensure a 3-dimensional fill of the canal system and chamber retained restorations like amalgam or composites, serve as satisfactory post endodontic restorations.