1
|
Modulation of Electrokinetic Potentials Using Graphene-Based Surfaces and Variable Substrate Charge Density. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024. [PMID: 38778044 DOI: 10.1021/acs.langmuir.4c00227] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/25/2024]
Abstract
Enhanced electrokinetic phenomena, manifested through the observation of a large streaming potential (Vs), were obtained in microchannels with single-layer graphene (SLG)-coated and few-layer graphene (FLG)-coated surfaces. In comparison to silicon microchannels, the Vs obtained for a given pressure difference along the channel (ΔP) was higher by 75% for the graphene-based channels, with larger values in the SLG case. Computational modeling was used to correlate the surface charge density, tuned through plasma processing, and related zeta potential to measured Vs. The implications related to deploying lower dimensional material surfaces for modulating electrokinetic flows were investigated.
Collapse
|
2
|
Advances in Two-Dimensional Ion-Selective Membranes: Bridging Nanoscale Insights to Industrial-Scale Salinity Gradient Energy Harvesting. ACS NANO 2024; 18:12610-12638. [PMID: 38733357 DOI: 10.1021/acsnano.3c11646] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2024]
Abstract
Salinity gradient energy, often referred to as the Gibbs free energy difference between saltwater and freshwater, is recognized as "blue energy" due to its inherent cleanliness, renewability, and continuous availability. Reverse electrodialysis (RED), relying on ion-selective membranes, stands as one of the most prevalent and promising methods for harnessing salinity gradient energy to generate electricity. Nevertheless, conventional RED membranes face challenges such as insufficient ion selectivity and transport rates and the difficulty of achieving the minimum commercial energy density threshold of 5 W/m2. In contrast, two-dimensional nanostructured materials, featuring nanoscale channels and abundant functional groups, offer a breakthrough by facilitating rapid ion transport and heightened selectivity. This comprehensive review delves into the mechanisms of osmotic power generation within a single nanopore and nanochannel, exploring optimal nanopore dimensions and nanochannel lengths. We subsequently examine the current landscape of power generation using two-dimensional nanostructured materials in laboratory-scale settings across various test areas. Furthermore, we address the notable decline in power density observed as test areas expand and propose essential criteria for the industrialization of two-dimensional ion-selective membranes. The review concludes with a forward-looking perspective, outlining future research directions, including scalable membrane fabrication, enhanced environmental adaptability, and integration into multiple industries. This review aims to bridge the gap between previous laboratory-scale investigations of two-dimensional ion-selective membranes in salinity gradient energy conversion and their potential large-scale industrial applications.
Collapse
|
3
|
Highly Efficient Conversion of Salinity Difference to Electricity in Nanofluidic Channels Boosted by Variable Thickness Polyelectrolyte Coating. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:10171-10183. [PMID: 38698764 DOI: 10.1021/acs.langmuir.4c00477] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2024]
Abstract
The inherent limits of the current produced by imposing salinity gradients along a nanofluidic channel having "hard" boundary walls heavily constrain the resulting energy harvesting efficacy, acting as major hindrances against the practicability of harnessing high power density from the mixing of water having different salinities. In this work, the infusion of variable-thickness polyelectrolyte layer of a conical shape is projected to augment salinity gradient power generation in nanochannels. Such a progressive thickening of a charged interfacial layer on account of axially declining ion concentration facilitates the shedding of enhanced numbers of mobile ions, bearing a net charge of equal and opposite to the surface-bound ions, into the mainstream current flow. We show that the proposed design can convert energy at a higher efficiency as compared to both solid-state and available polyelectrolyte layer (PEL)-covered nanochannels. The same is true for the maximum power density at moderate and high concentration ratios including natural salt gradient conditions for which more than 50% increase is achievable. The maximum values achieved for efficiency and power density read 50.3% and 6.6 kW/m2, respectively. Our results provide fundamental insights on strategizing variable-thickness polyelectrolyte layer grafting on the nanochannel interfaces, toward realizing high-performance osmotic power generators by altering the local ionic clouds alongside the grafted layers and enhancing the ionic mobility by inducing a driving potential gradient concomitantly. These findings open up a new strategy of efficient conversion of the power of the salinity difference of seawater and river water into electricity in a nanofluidic framework, surpassing the previously established limits of blue energy harvesting technologies.
Collapse
|
4
|
Commercial Nafion Membranes for Harvesting Osmotic Energy from Proton Gradients that Exceed the Commercial Goal of 5.0 W/m 2. ACS NANO 2024; 18:12580-12587. [PMID: 38696339 DOI: 10.1021/acsnano.4c04152] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2024]
Abstract
Osmotic energy from proton gradients in industrial acidic wastewater can be harvested and converted to electricity through membranes, making it a renewable and sustainable power source. However, the currently designed membranes for harvesting proton gradient energy in acidic wastewater cannot simultaneously achieve excellent chemical/mechanical stability and high power density under a large-scale area and require high cost and complex operations. Here, we demonstrate that commercial Nafion membranes with high chemical/mechanical stability and proton transport selectivity can generate a power density of 5.1 W/m2 for harvesting osmotic energy from proton gradients under a test area of 0.2 mm2, which exceeds the commercial goal of 5.0 W/m2. Even under a test area of 12.5 mm2, a power density of 2.1 W/m2 can be achieved under a strong acid condition. In addition, the heat can greatly promote proton transport, and the power density is increased, i.e., 8.1 W/m2 at 333 K (5.1 W/m2 at 293 K) under a test area of 0.2 mm2. By matching membranes with ion selectivity, our work demonstrates the potential of Nafion membranes for harvesting proton gradient energy in acidic wastewater and provides an approach for large-scale conversion of osmotic energy.
Collapse
|
5
|
Redox-Regulated Synthetic Channels: Enabling Reversible Ion Transport by Modulating the Ion-Permeation Pathway. Angew Chem Int Ed Engl 2024; 63:e202403667. [PMID: 38407803 DOI: 10.1002/anie.202403667] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2024] [Revised: 02/25/2024] [Accepted: 02/26/2024] [Indexed: 02/27/2024]
Abstract
Natural redox-regulated channel proteins often utilize disulfide bonds as redox sensors for adaptive regulation of channel conformations in response to diverse physiological environments. In this study, we developed novel synthetic ion channels capable of reversibly switching their ion-transport capabilities by incorporating multiple disulfide bonds into artificial systems. X-ray structural analysis and electrophysiological experiments demonstrated that these disulfide-bridged molecules possess well-defined tubular cavities and can be efficiently inserted into lipid bilayers to form artificial ion channels. More importantly, the disulfide bonds in these molecules serve as redox-tunable switches to regulate the formation and disruption of ion-permeation pathways, thereby achieving a transition in the transmembrane transport process between the ON and OFF states.
Collapse
|
6
|
Wet Etching of Silicon in Planar Nanochannels. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:9501-9508. [PMID: 38651296 DOI: 10.1021/acs.langmuir.4c00056] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/25/2024]
Abstract
Silicon (Si) alkaline etching constitutes a fundamental process in the semiconductor industry. Although its etching kinetics on plain substrates have been thoroughly investigated, the kinetics of Si wet etching in nanoconfinements have yet to be fully explored despite its practical importance in three-dimensional (3-D) semiconductor manufacturing. Herein, we report the systematic study of potassium hydroxide (KOH) wet etching kinetics of amorphous silicon (a-Si)-filled two-dimensional (2-D) planar nanochannels. Our findings reveal that the etching rate would increase with the increase in nanochannel height before reaching a plateau, indicating a strong nonlinear confinement effect. Through investigation using etching solutions with different ionic strengths and/or different temperatures, we further find that both electrostatic interactions and the hydration layer inside the nanoconfinement contribute to the confinement-dependent etching kinetics. Our results offer fresh perspectives into the kinetic study of reactions in nanoconfinements and will shed light on the optimization of etching processes in the semiconductor industry.
Collapse
|
7
|
Phase Engineering of Zirconium MOFs Enables Efficient Osmotic Energy Conversion: Structural Evolution Unveiled by Direct Imaging. J Am Chem Soc 2024; 146:11855-11865. [PMID: 38634945 DOI: 10.1021/jacs.4c00716] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/19/2024]
Abstract
Creating structural defects in a controlled manner within metal-organic frameworks (MOFs) poses a significant challenge for synthesis, and concurrently, identifying the types and distributions of these defects is also a formidable task for characterization. In this study, we demonstrate that by employing 2-sulfonylterephthalic acid as the ligand for synthesizing Zr (or Hf)-based MOFs, a crystal phase transformation from the common fcu topology to the rare jmt topology can be easily facilitated using a straightforward mixed-solvent strategy. The jmt phase, characterized by an extensively open framework, can be considered a derivative of the fcu phase, generated through the introduction of missing-cluster defects. We have explicitly identified both MOF phases, their intermediate states, and the novel core-shell structures they form using ultralow-dose high-resolution transmission electron microscopy. In addition to facilitating phase engineering, the incorporation of sulfonic groups in MOFs imparts ionic selectivity, making them applicable for osmotic energy harvesting through mixed matrix membrane fabrication. The membrane containing the jmt-phase MOF exhibits an exceptionally high peak power density of 10.08 W m-2 under a 50-fold salinity gradient (NaCl: 0.5 M|0.01 M), which surpasses the threshold of 5 W m-2 for commercial applications and can be attributed to the combination of large pore size, extensive porosity, and abundant sulfonic groups in this novel MOF material.
Collapse
|
8
|
Giant Blue Energy Harvesting in Two-Dimensional Polymer Membranes with Spatially Aligned Charges. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2310791. [PMID: 38299804 DOI: 10.1002/adma.202310791] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/16/2023] [Revised: 01/23/2024] [Indexed: 02/02/2024]
Abstract
Blue energy between seawater and river water is attracting increasing interest, as one of the sustainable and renewable energy resources that can be harvested from water. Within the reverse electrodialysis applied in blue energy conversion, novel membranes with nanoscale confinement that function as selective ion transport mediums are currently in high demand for realizing higher power density. The primary challenge lies in constructing well-defined nanochannels that allow for low-energy barrier transport. This work proposes a concept for nanofluidic channels with a simultaneous dual electrostatic effect that can enhance both ion selectivity and flux. To actualize this, this work has synthesized propidium iodide-based two-dimensional polymer (PI-2DP) membranes possessing both skeleton charge and intrinsic space charge, which are spatially aligned along the ion transport pathway. The dual charge design of PI-2DP significantly enhances the electrostatic interaction between the translocating anions and the cationic polymer framework, and a high anion selectivity coefficient (≈0.8) is reached. When mixing standard artificial seawater and river water, this work achieves a considerable power density of 48.4 W m-2, outperforming most state-of-the-art nanofluidic membranes. Moreover, when applied between the Mediterranean Sea and the Elbe River, an output power density of 42.2 W m-2 is achieved by the PI-2DP. This nanofluidic membrane design with dual-layer charges will inspire more innovative development of ion-selective channels for blue energy conversion that will contribute to global energy consumption.
Collapse
|
9
|
Heterogeneous CNF/MoO 3 nanofluidic membranes with tunable surface plasmon resonances for solar-osmotic energy conversion. MATERIALS HORIZONS 2024. [PMID: 38686603 DOI: 10.1039/d4mh00286e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2024]
Abstract
Two-dimensional (2D) nanofluidic membranes are competitive candidates for osmotic energy harvesting and have been greatly developed. However, the use of diverse inherent characteristics of 2D nanosheets, such as electronic or optoelectronic properties, to achieve intelligent ion transport, still lacks sufficient exploration. Here, a cellulose nanofiber/molybdenum oxide (CNF/MoO3) heterogeneous nanofluidic membrane with high performance solar-osmotic energy conversion is reported, and how surface plasmon resonances (SPR) regulate selective cation transport is revealed. The SPR of amorphous MoO3 endows the heterogeneous nanofluidic membranes with tunable surface charge and good photothermal conversion. Through DFT calculations and finite element modeling, the regulation of electronic and optoelectronic properties on the surface of materials by SPR and the influence of surface charge density and temperature gradient on ion transport in nanofluidic membranes are demonstrated. By mixing 0.01/0.5 M NaCl solutions using SPR and photothermal effects, the power density can achieve a remarkable value of ≈13.24 W m-2, outperforming state-of-the-art 2D-based nanofluidic membranes. This work first reveals the regulation and mechanism of SPR on ion transport in nanofluidic membranes and systematically studies photon-electron-ion interactions in nanofluidic membranes, which could also provide a new viewpoint for promoting osmotic energy conversion.
Collapse
|
10
|
Boosting Osmotic Energy Harvesting from Organic Solutions by Ultrathin Covalent Organic Framework Membranes. NANO LETTERS 2024; 24:4618-4624. [PMID: 38588453 DOI: 10.1021/acs.nanolett.4c00768] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/10/2024]
Abstract
Extracting osmotic energy from waste organic solutions via reverse electrodialysis represents a promising approach to reuse such industrial wastes and helps to mitigate the ever-growing energy needs. Herein, a molecularly thin membrane of covalent organic frameworks is engineered via interfacial polymerization to investigate its ion transport behavior in organic solutions. Interestingly, a significant deviation from linearity between ion conductance and reciprocal viscosity is observed, attributed to the nanoscale confinement effect on intermolecular interactions. This finding suggests a potential strategy to modulate the influence of apprarent viscosity on transmembrane transport. The osmotic energy harvesting of the ultrathin membrane in organic systems was studied, achieving an unprecedented output power density of over 84.5 W m-2 at a 1000-fold salinity gradient with a benign conversion efficiency and excellent stability. These findings provide a meaningful stepping stone for future studies seeking to fully leverage the potentials of organic systems in energy harvesting applications.
Collapse
|
11
|
Tunable Surface Charge of Layered Double Hydroxide Membranes Enabling Osmotic Energy Harvesting from Anion Transport. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2400850. [PMID: 38616735 DOI: 10.1002/smll.202400850] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/01/2024] [Revised: 03/24/2024] [Indexed: 04/16/2024]
Abstract
Membrane-based osmotic energy harvesting is a promising technology with zero carbon footprint. High-performance ion-selective membranes (ISMs) are the core components in such applications. Recent advancement in 2D nanomaterials opens new avenues for building highly efficient ISMs. However, the majority of the explored 2D nanomaterials have a negative surface charge, which selectively enhances cation transport, resulting in the underutilization of half of the available ions. In this study, ISMs based on layered double hydroxide (LDH) with tunable positive surface charge are studied. The membranes preferentially facilitate anion transport with high selectivity. Osmotic energy harvesting device based on these membranes reached a power density of 2.31 W m-2 under simulated river/sea water, about eight times versus that of a commercial membrane tested under the same conditions, and up to 7.05 W m-2 under elevated temperature and simulated brine/sea water, and long-term stability with consistent performance over a 40-day period. A prototype reverse electrodialysis energy harvesting device, comprising a pair of LDH membranes and commercial cation-selective membranes, is able to simultaneously harvest energy from both cations and anions achieving a power density of 6.38 W m-2 in simulated river/sea water, demonstrating its potential as building blocks for future energy harvesting systems.
Collapse
|
12
|
Addressing Challenges in Ion-Selectivity Characterization in Nanopores. J Am Chem Soc 2024. [PMID: 38606686 DOI: 10.1021/jacs.4c00603] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/13/2024]
Abstract
Ion selectivity is the basis for designing smart nanopore/channel-based devices, e.g., ion separators and biosensors. Quantitative characterization of ion selectivities in nanopores often employs the Nernst or Goldman-Hodgkin-Katz (GHK) equation to interpret transmembrane potentials. However, the direction of the measured transmembrane potential drop is not specified in these equations, and selectivity values calculated using absolute values of transmembrane potentials do not directly reveal the ion for which the membrane is selective. Moreover, researchers arbitrarily choose whether to use the Nernst or GHK equation and overlook the significant differences between them, leading to ineffective quantitative comparisons between studies. This work addresses these challenges through (a) specifying the transmembrane potential (sign) and salt concentrations in terms of working and reference electrodes and the solutions in which they reside when using the Nernst and GHK equations, (b) reporting of both Nernst-selectivity and GHK-selectivity along with solution compositions and transmembrane potentials when comparing different nanopores/channels, and (c) performing simulations to define an ideal selectivity for nanochannels. Experimental and modeling studies provide significant insight into these fundamental equations and guidelines for the development of nanopore/channel-based devices.
Collapse
|
13
|
Single-Layer Hexagonal Boron Nitride Nanopores as High-Performance Ionic Gradient Power Generators. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2306018. [PMID: 38041449 DOI: 10.1002/smll.202306018] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/18/2023] [Revised: 11/14/2023] [Indexed: 12/03/2023]
Abstract
Atomically thin two-dimensional (2D) materials have emerged as promising candidates for efficient energy harvesting from ionic gradients. However, the exploration of robust 2D atomically thin nanopore membranes, which hold sufficient ionic selectivity and high ion permeability, remains challenging. Here, the single-layer hexagonal boron nitride (hBN) nanopores are demonstrated as various high-performance ion-gradient nanopower harvesters. Benefiting from the ultrathin atomic thickness and large surface charge (also a large Dukhin number), the hBN nanopore can realize fast proton transport while maintaining excellent cation selectivity even in highly acidic environments. Therefore, a single hBN nanopore achieves the pure osmosis-driven proton-gradient power up to ≈3 nW under 1000-fold ionic gradient. In addition, the robustness of hBN membranes in extreme pH conditions allows the ionic gradient power generation from acid-base neutralization. Utilizing 1 m HCl/KOH, the generated power can be promoted to an extraordinarily high level of ≈4.5 nW, over one magnitude higher than all existing ionic gradient power generators. The synergistic effects of ultrathin thickness, large surface charge, and excellent chemical inertness of 2D single-layer hBN render it a promising membrane candidate for harvesting ionic gradient powers, even under extreme pH conditions.
Collapse
|
14
|
Bio-Inspired Subnanofluidics: Advanced Fabrication and Functionalization. SMALL METHODS 2024; 8:e2300278. [PMID: 37203269 DOI: 10.1002/smtd.202300278] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2023] [Revised: 05/02/2023] [Indexed: 05/20/2023]
Abstract
Biological ion channels can realize high-speed and high-selective ion transport through the protein filter with the sub-1-nanometer channel. Inspired by biological ion channels, various kinds of artificial subnanopores, subnanochannels, and subnanoslits with improved ion selectivity and permeability are recently developed for efficient separation, energy conversion, and biosensing. This review article discusses the advanced fabrication and functionalization methods for constructing subnanofluidic pores, channels, tubes, and slits, which have shown great potential for various applications. Novel fabrication methods for producing subnanofluidics, including top-down techniques such as electron beam etching, ion irradiation, and electrochemical etching, as well as bottom-up approaches starting from advanced microporous frameworks, microporous polymers, lipid bilayer embedded subnanochannels, and stacked 2D materials are well summarized. Meanwhile, the functionalization methods of subnanochannels are discussed based on the introduction of functional groups, which are classified into direct synthesis, covalent bond modifications, and functional molecule fillings. These methods have enabled the construction of subnanochannels with precise control of structure, size, and functionality. The current progress, challenges, and future directions in the field of subnanofluidic are also discussed.
Collapse
|
15
|
A Simple Cost-Effective Method to Fabricate Single Nanochannels by Embedding Electrospun Polyethylene Oxide Nanofibers. ChemistryOpen 2024:e202400008. [PMID: 38511871 DOI: 10.1002/open.202400008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/09/2024] [Revised: 02/20/2024] [Indexed: 03/22/2024] Open
Abstract
Solid state nanochannels provide significant practical advantages in many fields due to their interesting properties, such as controllable shape and size, robustness, ion selectivity. But their complex preparation processes severely limit their application. In this study, a simple cost-effective method to fabricate single nanochannel by embedding a single polyethylene oxide (PEO) nanofiber is presented. Firstly, PEO nanofibers are prepared by electrospinning, and then a single PEO nanofiber are precisely transferred to the target sample using a micromanipulation platform. Then, PDMS is used for embedding, and finally, the PEO nanofiber is dissolved to obtain a single nanochannel. Unlike other methods of preparing nanochannels by embedding nanofibers, this method can prepare single nanochannel. The diameter of nanochannel can be as fine as 100 nm, and the length can reach several micrometers. The power generation between two potassium chloride solutions with various combinations of concentrations was investigated using the nanochannel. This low-cost flexible nanochannel can also be used in various applications, including DNA sequencing and biomimetic ion channel.
Collapse
|
16
|
Nanofluidic logic with mechano-ionic memristive switches. NATURE ELECTRONICS 2024; 7:271-278. [PMID: 38681725 PMCID: PMC11045460 DOI: 10.1038/s41928-024-01137-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 07/09/2023] [Accepted: 02/21/2024] [Indexed: 05/01/2024]
Abstract
Neuromorphic systems are typically based on nanoscale electronic devices, but nature relies on ions for energy-efficient information processing. Nanofluidic memristive devices could thus potentially be used to construct electrolytic computers that mimic the brain down to its basic principles of operation. Here we report a nanofluidic device that is designed for circuit-scale in-memory processing. The device, which is fabricated using a scalable process, combines single-digit nanometric confinement and large entrance asymmetry and operates on the second timescale with a conductance ratio in the range of 9 to 60. In operando optical microscopy shows that the memory capabilities are due to the reversible formation of liquid blisters that modulate the conductance of the device. We use these mechano-ionic memristive switches to assemble logic circuits composed of two interactive devices and an ohmic resistor.
Collapse
|
17
|
Ion transport in nanofluidics under external fields. Chem Soc Rev 2024; 53:2972-3001. [PMID: 38345093 DOI: 10.1039/d3cs00367a] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/19/2024]
Abstract
Nanofluidic channels with tailored ion transport dynamics are usually used as channels for ion transport, to enable high-performance ion regulation behaviors. The rational construction of nanofluidics and the introduction of external fields are of vital significance to the advancement and development of these ion transport properties. Focusing on the recent advances of nanofluidics, in this review, various dimensional nanomaterials and their derived homogeneous/heterogeneous nanofluidics are first briefly introduced. Then we discuss the basic principles and properties of ion transport in nanofluidics. As the major part of this review, we focus on recent progress in ion transport in nanofluidics regulated by external physical fields (electric field, light, heat, pressure, etc.) and chemical fields (pH, concentration gradient, chemical reaction, etc.), and reveal the advantages and ion regulation mechanisms of each type. Moreover, the representative applications of these nanofluidic channels in sensing, ionic devices, energy conversion, and other areas are summarized. Finally, the major challenges that need to be addressed in this research field and the future perspective of nanofluidics development and practical applications are briefly illustrated.
Collapse
|
18
|
Light-responsive and ultrapermeable two-dimensional metal-organic framework membrane for efficient ionic energy harvesting. Nat Commun 2024; 15:2125. [PMID: 38459037 PMCID: PMC10923900 DOI: 10.1038/s41467-024-46439-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2023] [Accepted: 02/22/2024] [Indexed: 03/10/2024] Open
Abstract
Nanofluidic membranes offer exceptional promise for osmotic energy conversion, but the challenge of balancing ionic selectivity and permeability persists. Here, we present a bionic nanofluidic system based on two-dimensional (2D) copper tetra-(4-carboxyphenyl) porphyrin framework (Cu-TCPP). The inherent nanoporous structure and horizontal interlayer channels endow the Cu-TCPP membrane with ultrahigh ion permeability and allow for a power density of 16.64 W m-2, surpassing state of-the-art nanochannel membranes. Moreover, leveraging the photo-thermal property of Cu-TCPP, light-controlled ion active transport is realized even under natural sunlight. By combining solar energy with salinity gradient, the driving force for ion transport is reinforced, leading to further improvements in energy conversion performance. Notably, light could even eliminate the need for salinity gradient, achieving a power density of 0.82 W m-2 in a symmetric solution system. Our work introduces a new perspective on developing advanced membranes for solar/ionic energy conversion and extends the concept of salinity energy to a notion of ionic energy.
Collapse
|
19
|
Bioinspired 2D nanofluidic membranes for energy applications. Chem Soc Rev 2024; 53:2300-2325. [PMID: 38284167 DOI: 10.1039/d3cs00382e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/30/2024]
Abstract
Bioinspired two-dimensional (2D) nanofluidic membranes have been explored for the creation of high-performance ion transport systems that can mimic the delicate transport functions of living organisms. Advanced energy devices made from these membranes show excellent energy storage and conversion capabilities. Further research and development in this area are essential to unlock the full potential of energy devices and facilitate the development of high-performance equipment toward real-world applications and a sustainable future. However, there has been minimal review and summarization of 2D nanofluidic membranes in recent years. Thus, it is necessary to carry out an extensive review to provide a survey library for researchers in related fields. In this review, the classification and the raw materials that are used to construct 2D nanofluidic membranes are first presented. Second, the top-down and bottom-up methods for constructing 2D membranes are introduced. Next, the applications of bioinspired 2D membranes in osmotic energy, hydraulic energy, mechanical energy, photoelectric conversion, lithium batteries, and flow batteries are discussed in detail. Finally, the opportunities and challenges that 2D nanofluidic membranes are likely to face in the future are envisioned. This review aims to provide a broad knowledge base for constructing high-performance bioinspired 2D nanofluidic membranes for advanced energy applications.
Collapse
|
20
|
Interfacial Assembly of 2D Graphene-Derived Ion Channels for Water-Based Green Energy Conversion. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2307849. [PMID: 37873917 DOI: 10.1002/adma.202307849] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/04/2023] [Revised: 10/12/2023] [Indexed: 10/25/2023]
Abstract
The utilization of sustained and green energy is believed to alleviate increasing menace of global environmental concerns and energy dilemma. Interfacial assembly of 2D graphene-derived ion channels (2D-GDICs) with tunable ion/fluid transport behavior enables efficient harvesting of renewable green energy from ubiquitous water, especially for osmotic energy harvesting. In this review, various interfacial assembly strategies for fabricating diverse 2D-GDICs are summarized and their ion transport properties are discussed. This review analyzes how particular structure and charge density/distribution of 2D-GDIC can be modulated to minimize internal resistance of ion/fluid transport and enhance energy conversion efficiency, and highlights stimuli-responsive functions and stability of 2D-GDIC and further examines the possibility of integrating 2D-GDIC with other energy conversion systems. Notably, the presented preparation and applications of 2D-GDIC also inspire and guide other 2D materials to fabricate sophisticated ion channels for targeted applications. Finally, potential challenges in this field is analyzed and a prospect to future developments toward high-performance or large-scale real-word applications is offered.
Collapse
|
21
|
Nanoporous Amorphous Carbon Monolayer Derived from Fullerene Film. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2308187. [PMID: 38155485 PMCID: PMC10933613 DOI: 10.1002/advs.202308187] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/28/2023] [Revised: 12/07/2023] [Indexed: 12/30/2023]
Abstract
Carbon materials derived from fullerene are reported recently with unique structures and properties. However, only micrometer size samples can be obtained that limits the studying and exploration for membrane applications. Here, the preparation of a centimeter-size nanoporous amorphous carbon monolayer is reported by rapid pyrolyzing a Langmuir-Blodgett film of fullerene. The sample is fully characterized and the results indicate that the amorphous carbon monolayer derived from fullerene is metastable and insulating. The ionic transmembrane transport study demonstrates that the membrane is porous and cation selective with a selectivity of 26%. This work provides new insights into the controlled synthesis of large-size metastable amorphous carbon monolayer.
Collapse
|
22
|
Modulation of transport at the interface in the microporous layer for high power density proton exchange membrane fuel cells. J Colloid Interface Sci 2024; 657:428-437. [PMID: 38056047 DOI: 10.1016/j.jcis.2023.11.089] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Revised: 11/09/2023] [Accepted: 11/15/2023] [Indexed: 12/08/2023]
Abstract
The proton exchange membrane (PEM) fuel cell is a device that demonstrates a significant potential for environmental sustainability, since it efficiently converts chemical energy into electrical energy. The microporous layer (MPL) in PEM fuel cells promotes gas transport and eliminates water. Nevertheless, the power density of PEM fuel cells is restricted by ohmic losses and mass transport losses in conventional MPLs. In this study, we enhanced the power density of proton exchange membrane (PEM) fuel cells through the identification of appropriate materials and the mitigation of mass transport losses occurring at the interface between the microporous layer and the catalyst layer. The incorporation of high electron conductivity, slip behavior at the interface between graphene and water, and rapid water evaporation facilitated by nanoporous graphene effectively address transport-related challenges. We evaluated two types of graphene as potential substitutes for carbon black in the microporous layer (MPL). The enhanced power density (up to 1.1 W cm-2) under all humidity conditions and reduced mass transport resistance (a 75 % reduction compared to carbon black MPL) make them promising candidates for next-generation PEM fuel cells. Furthermore, these findings provide guidance for controlling interfacial mass transport in colloidal systems.
Collapse
|
23
|
Molecular self-assembled cellulose enabling durable, scalable, high-power osmotic energy harvesting. Carbohydr Polym 2024; 327:121656. [PMID: 38171677 DOI: 10.1016/j.carbpol.2023.121656] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2023] [Revised: 11/24/2023] [Accepted: 11/29/2023] [Indexed: 01/05/2024]
Abstract
In recent years, renewable cellulose-based ion exchange membranes have emerged as promising candidates for capturing green, abundant osmotic energy. However, the low power density and structural/performance instability are challenging for such cellulose membranes. Herein, cellulose-molecule self-assembly engineering (CMA) is developed to construct environmentally friendly, durable, scalable cellulose membranes (CMA membranes). Such a strategy enables CMA membranes with ideal nanochannels (∼7 nm) and tailored channel lengths, which support excellent ion selectivity and ion fluxes toward high-performance osmotic energy harvesting. Finite element simulations also verified the function of tailored nanochannel length on osmotic energy conversion. Correspondingly, our CMA membrane shows a high-power density of 2.27 W/m2 at a 50-fold KCl gradient and super high voltage of 1.32 V with 30-pair CMA membranes (testing area of 22.2 cm2). In addition, the CMA membrane demonstrates long-term structural and dimensional integrity in saline solution, due to their high wet strength (4.2 MPa for N-CMA membrane and 0.5 MPa for P-CMA membrane), and correspondingly generates ultrastable yet high power density more than 100 days. The self-assembly engineering of cellulose molecules constructs high-performance ion-selective membranes with environmentally friendly, scalable, high wet strength and stability advantages, which guide sustainable nanofluidic applications beyond the blue energy.
Collapse
|
24
|
2D Ordered Mesoporous Lamellar Hetero-Nanochannels with Asymmetric Wettability for Controllable Ion Transport. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2306910. [PMID: 37926698 DOI: 10.1002/smll.202306910] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/12/2023] [Revised: 10/16/2023] [Indexed: 11/07/2023]
Abstract
Heterogeneous membranes play a crucial role in osmotic energy conversion by effectively reducing concentration polarization. However, most heterogeneous membranes mitigate concentration polarization through an asymmetric charge distribution, resulting in compromised ion selectivity. Herein, hetero-nanochannels with asymmetric wettability composed of 2D mesoporous carbon and graphene oxide are constructed. The asymmetric wettability of the membrane endows it with the ability to suppress the concentration polarization without degrading the ion selectivity, as well as achieving a diode-like ion transport feature. As a result, enhanced osmotic energy harvesting is achieved with a power density of 6.41 W m-2 . This represents a substantial enhancement of 102.80-137.85% when compared to homogeneous 2D membranes, surpassing the performance of the majority of reported 2D membranes. Importantly, the membrane can be further used for high-performance ionic power harvesting by regulating ion transport, exceeding previously reported data by 89.1%.
Collapse
|
25
|
Enhanced Selective Ion Transport in Highly Charged Bacterial Cellulose/Boron Nitride Composite Membranes for Thermo-Osmotic Energy Harvesting. NANO LETTERS 2024; 24:2218-2225. [PMID: 38277614 DOI: 10.1021/acs.nanolett.3c04343] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/28/2024]
Abstract
Significant untapped energy exists within low-grade heat sources and salinity gradients. Traditional nanofluidic membranes exhibit inherent limitations, including low ion selectivity, high internal resistance, reliance on nonrenewable resources, and instability in aqueous solutions, invariably constraining their practical application. Here, an innovative composite membrane-based nanofluidic system is reported, involving the strategy of integrating tailor-modified bacterial nanofibers with boron nitride nanosheets, enabling high surface charge densities while maintaining a delicate balance between ion selectivity and permeability, ultimately facilitating effective thermo-osmotic energy harvesting. The device exhibits an impressive output power density of 10 W m-2 with artificial seawater and river water at a 50 K temperature gradient. Furthermore, it demonstrates robust power density stability under prolonged exposure to salinity gradients or even at elevated temperatures. This work opens new avenues for the development of nanofluidic systems utilizing composite materials and presents promising solutions for low-grade heat recovery and osmotic energy harvesting.
Collapse
|
26
|
Solid-State Nanopore/Nanochannel Sensors with Enhanced Selectivity through Pore-in Modification. Anal Chem 2024; 96:2277-2285. [PMID: 38285919 DOI: 10.1021/acs.analchem.3c05228] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/31/2024]
Abstract
Nanopore sensing technology, as an emerging analytical method, has the advantages of simple operation, fast output, and label-free and has been widely used in fields such as protein analysis, gene sequencing, and biomarker detection. Inspired by biological ion channels, scientists have prepared various artificial solid-state nanopores/nanochannels. Biological ion channels have extremely high ion transport selectivity, while solid-state nanopores/nanochannels have poor selectivity. The selectivity of solid-state nanopores and nanochannels can be enhanced by modifying channel charge, varying pore size, incorporating specific chemical functionality, and adjusting operating (or solution) conditions. This Perspective highlights pore-in modification strategies for enhancing the selectivity of solid-state nanopore/nanochannel sensors by summarizing the articles published in the last 10 years. The future development prospects and challenges of pore-in modification in solid-state nanopore and nanochannel sensors are discussed. This Perspective helps readers better understand nanopore sensing technology, especially the importance of detection selectivity. We believe that solid-state nanopore/nanochannel sensors will soon enter our homes after various challenges.
Collapse
|
27
|
Single Idiosyncratic Ionic Generator Working in Iso-Osmotic Solutions Via Ligand Confined Assembled in Gaps Between Nanosheets. Angew Chem Int Ed Engl 2024; 63:e202317361. [PMID: 38116868 DOI: 10.1002/anie.202317361] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/14/2023] [Revised: 12/05/2023] [Accepted: 12/18/2023] [Indexed: 12/21/2023]
Abstract
Numerous reported bioinspired osmotic energy conversion systems employing cation-/anion-selective membranes and solutions with different salinity are actually far from the biological counterpart. The iso-osmotic power generator with the specific ionic permselective channels (e.g., K+ or Na+ channels) which just allow specific ions to get across and iso-osmotic solutions still remain challenges. Inspired by nature, we report a bioinspired K+ -channel by employing a K+ selective ligand, 1,1,1-tris{[(2'-benzylaminoformyl)phenoxy]methyl}ethane (BMP) and graphene oxide membrane. Specifically, the K+ and Na+ selectivity of the prepared system could reach up to ≈17.8, and the molecular dynamics simulation revealed that the excellent permselectivity of K+ mainly stemmed from the formed suitable channel size. Thus, we assembled the K+ -selective iso-osmotic power generator (KSIPG) with the power density up to ≈15.1 mW/m2 between equal concentration solutions, which is higher than traditional charge-selective osmotic power generator (CSOPG). The proposed strategy has well shown the realizable approach to construct single-ion selective channels-based highly efficient iso-osmotic energy conversion systems and would surely inspire new applications in other fields, including self-powered systems and medical materials, etc.
Collapse
|
28
|
Pressure-dependent flow enhancement in carbon nanotubes. J Chem Phys 2024; 160:054503. [PMID: 38341689 DOI: 10.1063/5.0179870] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/05/2023] [Accepted: 01/11/2024] [Indexed: 02/13/2024] Open
Abstract
It is a known and experimentally verified fact that the flow of pressure-driven nanoconfined fluids cannot be accurately described by the Navier-Stokes (NS) equations with non-slip boundary conditions, and the measured volumetric flow rates are much higher than those predicted by macroscopical continuum models. In particular, the flow enhancement factors (the ratio between the flow rates directly measured by experiments or simulations and those predicted by the non-slip NS equation) reported by previous studies have more than five orders of magnitude differences. We showcased an anomalous phenomenon in which the flow enhancement exhibits a non-monotonic correlation with fluid pressure within the carbon nanotube with a diameter of 2 nm. Molecular dynamics simulations indicate that the inconsistency of flow behaviors is attributed to the phase transition of nanoconfined fluid induced by fluid pressures. The nanomechanical mechanisms are contributed by complex hydrogen-bonding interactions and regulated water orientations. This study suggests a method for explaining the inconsistency of flow enhancements by considering the pressure-dependent molecular structures.
Collapse
|
29
|
Tuning Pore Size in Graphene in the Angstrom Regime for Highly Selective Ion-Ion Separation. ACS NANO 2024. [PMID: 38320296 PMCID: PMC10883049 DOI: 10.1021/acsnano.3c11068] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/08/2024]
Abstract
Zero-dimensional pores spanning only a few angstroms in size in two-dimensional materials such as graphene are some of the most promising systems for designing ion-ion selective membranes. However, the key challenge in the field is that so far a crack-free macroscopic graphene membrane for ion-ion separation has not been realized. Further, methods to tune the pores in the Å-regime to achieve a large ion-ion selectivity from the graphene pore have not been realized. Herein, we report an Å-scale pore size tuning tool for single layer graphene, which incorporates a high density of ion-ion selective pores between 3.5 and 8.5 Å while minimizing the nonselective pores above 10 Å. These pores impose a strong confinement for ions, which results in extremely high selectivity from centimeter-scale porous graphene between monovalent and bivalent ions and near complete blockage of ions with the hydration diameter, DH, greater than 9.0 Å. The ion diffusion study reveals the presence of an energy barrier corresponding to partial dehydration of ions with the barrier increasing with DH. We observe a reversal of K+/Li+ selectivity at elevated temperature and attribute this to the relative size of the dehydrated ions. These results underscore the promise of porous two-dimensional materials for solute-solute separation when Å-scale pores can be incorporated in a precise manner.
Collapse
|
30
|
Nanoscale electrohydrodynamic ion transport: Influences of channel geometry and polarization-induced surface charges. Phys Rev E 2024; 109:025105. [PMID: 38491612 DOI: 10.1103/physreve.109.025105] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/23/2023] [Accepted: 01/19/2024] [Indexed: 03/18/2024]
Abstract
Electrohydrodynamic ion transport has been studied in nanotubes, nanoslits, and nanopores to mimic the advanced functionalities of biological ion channels. However, probing how the intricate interplay between the electrical and mechanical interactions affects ion conduction in asymmetric nanoconduits presents further obstacles. Here, ion transport across a conical nanopore embedded in a polarizable membrane under an electric field and pressure is analyzed by numerically solving a continuum model based on the Poisson, Nernst-Planck, and Navier-Stokes equations. We report an anomalous ionic current depletion, of up to 75%, and an unexpected rise in current rectification when pressure is exerted along the external electric field. Membrane polarization is revealed as the prerequisite to obtain this previously undetected electrohydrodynamic coupling. The electric field induces large surface charges at the pore tip due to its conical shape, creating nonuniform electrical double layers (EDL) with a massive accumulation of electrolyte ions near the orifice. Once applied, the pressure distorts the quasiequilibrium distribution of the EDL ions to influence the nanopore conductivity. Our fundamental approach to inspect the effect of pressure on the channel EDL (and thus ionic conductance) in contrast to its effect on the current arising from the hydrodynamic streaming of ions further explains the pressure-sensitive ion transport in different nanochannels and physical regimes manifested in past experiments, including the hitherto inexplicit mechanism behind the mechanically activated ion transport in carbon nanotubes. This enhances our broad understanding of nanoscale electrohydrodynamic ion transport, yielding a platform to build nanofluidic devices and ionic circuits with more robust and tunable responses to electrical and mechanical stimuli.
Collapse
|
31
|
Ion current rectification properties of non-Newtonian fluids in conical nanochannels. Phys Chem Chem Phys 2024; 26:2895-2906. [PMID: 38170851 DOI: 10.1039/d3cp05184f] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2024]
Abstract
Ionic current rectification generated by the geometric asymmetry of conical nanochannels has gradually attracted attention, but most studies have been limited to Newtonian fluids. In this study, the ionic current rectification characteristics in conical nanochannels filled with non-Newtonian fluids are investigated by numerical simulations. Electroosmotic flow and ion transport in Sisko fluids are solved using the Poisson-Nernst-Planck equations and the Navier-Stokes equations. The effects of the Debye parameter, power-law indexes and applied voltage on the ionic current, axial potential, ion concentration, radial velocity and rectification ratio in the nanopores are investigated. When κRt = 1, the current rectification ratio increases with the increase of the power-law index. However, when κRt = 6, the current rectification ratio first increases and then decreases with the increase of the power law index, reaching the maximum value at n = 1.0. These findings have positive implications for the construction of some nanodevices such as nanofluidic diodes.
Collapse
|
32
|
Bio-inspired Double Angstrom-Scale Confinement in Ti-deficient Ti 0.87 O 2 Nanosheet Membranes for Ultrahigh-performance Osmotic Power Generation. Angew Chem Int Ed Engl 2024; 63:e202315947. [PMID: 38059770 DOI: 10.1002/anie.202315947] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2023] [Revised: 11/30/2023] [Accepted: 12/01/2023] [Indexed: 12/08/2023]
Abstract
Osmotic power, a clean energy source, can be harvested from the salinity difference between seawater and river water. However, the output power densities are hampered by the trade-off between ion selectivity and ion permeability. Here we propose an effective strategy of double angstrom-scale confinement (DAC) to design ion-permselective channels with enhanced ion selectivity and permeability simultaneously. The fabricated DAC-Ti0.87 O2 membranes possess both Ti atomic vacancies and an interlayer free spacing of ≈2.2 Å, which not only generates a profitable confinement effect for Na+ ions to enable high ion selectivity but also induces a strong interaction with Na+ ions to benefit high ion permeability. Consequently, when applied to osmotic power generation, the DAC-Ti0.87 O2 membranes achieved an ultrahigh power density of 17.8 W m-2 by mixing 0.5/0.01 M NaCl solution and up to 114.2 W m-2 with a 500-fold salinity gradient, far exceeding all the reported macroscopic-scale membranes. This work highlights the potential of the construction of DAC ion-permselective channels for two-dimensional materials in high-performance nanofluidic energy systems.
Collapse
|
33
|
Unlocking osmotic energy harvesting potential in challenging real-world hypersaline environments through vermiculite-based hetero-nanochannels. Nat Commun 2024; 15:608. [PMID: 38242879 PMCID: PMC10799064 DOI: 10.1038/s41467-023-44434-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2023] [Accepted: 12/13/2023] [Indexed: 01/21/2024] Open
Abstract
Nanochannel membranes have demonstrated remarkable potential for osmotic energy harvesting; however, their efficiency in practical high-salinity systems is hindered by reduced ion selectivity. Here, we propose a dual-separation transport strategy by constructing a two-dimensional (2D) vermiculite (VMT)-based heterogeneous nanofluidic system via an eco-friendly and scalable method. The cations are initially separated and enriched in micropores of substrates during the transmembrane diffusion, followed by secondary precise sieving in ultra-thin VMT laminates with high ion flux. Resultantly, our nanofluidic system demonstrates efficient osmotic energy harvesting performance, especially in hypersaline environment. Notably, we achieve a maximum power density of 33.76 W m-2, a 6.2-fold improvement with a ten-fold increase in salinity gradient, surpassing state-of-the-art nanochannel membranes under challenging conditions. Additionally, we confirm practical hypersaline osmotic power generation using various natural salt-lake brines, achieving a power density of 25.9 W m-2. This work triggers the hopes for practical blue energy conversion using advanced nanoarchitecture.
Collapse
|
34
|
Enhancing Sustainable Energy Conversion Efficiency by Incorporating Photoelectric Responsiveness into Multiporous Ionic Membrane. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024:e2310791. [PMID: 38214692 DOI: 10.1002/smll.202310791] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/22/2023] [Revised: 12/28/2023] [Indexed: 01/13/2024]
Abstract
The evolution of porous membranes has revitalized their potential application in sustainable osmotic-energy conversion. However, the performance of multiporous membranes deviates significantly from the linear extrapolation of single-pore membranes, primarily due to the occurrence of ion-concentration polarization (ICP). This study proposes a robust strategy to overcome this challenge by incorporating photoelectric responsiveness into permselective membranes. By introducing light-induced electric fields within the membrane, the transport of ions is accelerated, leading to a reduction in the diffusion boundary layer and effectively mitigating the detrimental effects of ICP. The developed photoelectric-responsive covalent-organic-framework membranes exhibit an impressive output power density of 69.6 W m-2 under illumination, surpassing the commercial viability threshold by ≈14-fold. This research uncovers a previously unexplored benefit of integrating optical electric conversion with reverse electrodialysis, thereby enhancing energy conversion efficiency.
Collapse
|
35
|
Preanchoring Enabled Directional Modification of Atomically Thin Membrane for High-Performance Osmotic Energy Generation. NANO LETTERS 2024; 24:26-34. [PMID: 38117701 DOI: 10.1021/acs.nanolett.3c03041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/22/2023]
Abstract
Salinity gradient energy is an environmentally friendly energy source that possesses potential to meet the growing global energy demand. Although covalently modified nanoporous graphene membranes are prospective candidates to break the trade-off between ion selectivity and permeability, the random reaction sites and inevitable defects during modification reduce the reaction efficiency and energy conversion performance. Here, we developed a preanchoring method to achieve directional modification near the graphene nanopores periphery. Numerical simulation revealed that the improved surface charge density around nanopores results in exceptional K+/Cl- selectivity and osmotic energy conversion performance, which agreed well with experimental results. Ionic transport measurements showed that the directionally modified graphene membranes achieved an outstanding power density of 81.6 W m-2 with an energy conversion efficiency of 35.4% under a 100-fold salinity gradient, outperforming state-of-the-art graphene-based nanoporous membranes. This work provided a facile approach for precise modification of nanoporous graphene membranes and opened up new ways for osmotic power harvesting.
Collapse
|
36
|
Charge Exchange and Transfer between Water and van der Waals Monolayers Under Tensile Strains. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2024; 40:714-720. [PMID: 38154109 DOI: 10.1021/acs.langmuir.3c02924] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/30/2023]
Abstract
Charge exchange and transfer between water and low-dimensional materials are critical for water-related nanogenerators to harvest electricity from water. By first-principles calculations and molecular dynamics simulations, the interface interaction and charge transfer between ion-containing or pure water and two-dimensional (2D) van der Waals monolayers including transition metal dichalcogenides, hexagonal boron nitride, and graphene have been systematically investigated. Applying uniaxial tensile strain or the introduction of defects on 2D monolayers could significantly enhance the interface interaction and charge transfer from 2D monolayers to water molecules, as the tensile strain or defect weakens the bonds of 2D monolayers and changes the hydrogen bond networks in the interfacial water layer. In contrast, the presence of ions in water suppresses the charge transfer from 2D monolayers to water molecules and reduces interfacial adhesion because of the formation of hydrated ions and stronger charge exchange between ions and water molecules. These results reveal the role of strain, defect, and ion in dominating the charge exchange and transfer between water and 2D monolayers.
Collapse
|
37
|
Confined amphipathic ionic-liquid regulated anodic aluminum oxide membranes with adjustable ion selectivity for improved osmotic energy conversion. J Colloid Interface Sci 2024; 653:1217-1224. [PMID: 37797497 DOI: 10.1016/j.jcis.2023.09.181] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/07/2023] [Revised: 09/25/2023] [Accepted: 09/29/2023] [Indexed: 10/07/2023]
Abstract
To attain carbon neutrality and carbon peaking, there is an urgent need to convert the vast amount of blue energy present between seawater and river water into usable electricity. Reverse electrodialysis based on ion-exchange membranes is a promising way to efficiently achieve osmotic energy conversion. Anodic aluminum oxide (AAO) membranes are frequently used for osmotic energy harvesting because of their uniform nanopore channels, high flux, and excellent stability. However, the existing surface modification methods are complex and inefficient. In this study, an amphiphilic ionic liquid was selected to modify a porous anodic alumina membrane via simple capillary insertion. Due to the abundance of pH-dependent amphiphilic OH groups on the surface of AAO pore channels, the ionic liquids not only provide abundant surface charge but can also intelligently adjust its surface charge to different environments. In addition, it fills the AAO nanochannels to provide a continuous ion transport network. The modified hybrid membrane achieves efficient and stable osmotic energy conversion performance. This simple and feasible strategy paves the way for further improvements in commercial membranes.
Collapse
|
38
|
Covalently Functionalized Nanopores for Highly Selective Separation of Monovalent Ions. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2307242. [PMID: 37717168 DOI: 10.1002/adma.202307242] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/21/2023] [Revised: 09/03/2023] [Indexed: 09/18/2023]
Abstract
Biological ion channels possess prominent ion transport performances attributed to their critical chemical groups across the continuous nanoscale filters. However, it is still a challenge to imitate these sophisticated performances in artificial nanoscale systems. Herein, this work develops the strategy to fabricate functionalized graphene nanopores in pioneer based on the synergistic regulation of the pore size and chemical properties of atomically thin confined structure through decoupling etching combined with in situ covalent modification. The modified graphene nanopores possess asymmetric ion transport behaviors and efficient monovalent metal ions sieving (K+ /Li+ selectivity ≈48.6). Meanwhile, it also allows preferential transport for cations, the resulting membranes exhibit a K+ /Cl- selectivity of 76 and a H+ /Cl- selectivity of 59.3. The synergistic effects of steric hindrance and electrostatic interactions imposing a higher energy barrier for Cl- or Li+ across nanopores lead to ultra-selective H+ or K+ transport. Further, the functionalized graphene nanopores generate a power density of 25.3 W m-2 and a conversion efficiency of 33.9%, showing potential application prospects in energy conversion. The theoretical studies quantitatively match well with the experimental results. The feasible preparation of functionalized graphene nanopores paves the way toward direct investigation on ion transport mechanism and advanced design in devices.
Collapse
|
39
|
Surface-dominant micro/nanofluidics for efficient green energy conversion. BIOMICROFLUIDICS 2024; 18:011503. [PMID: 38370510 PMCID: PMC10869172 DOI: 10.1063/5.0190934] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/10/2023] [Accepted: 01/20/2024] [Indexed: 02/20/2024]
Abstract
Green energy conversion in aqueous systems has attracted considerable interest owing to the sustainable clean energy demand resulting from population and economic growth and urbanization, as well as the significant potential energy from water resources and other regenerative sources coupled with fluids. In particular, molecular motion based on intrinsic micro/nanofluidic phenomena at the liquid-solid interface (LSI) is crucial for efficient and sustainable green energy conversion. The electrical double layer is the main factor affecting transport, interaction between molecules and surfaces, non-uniform ion distribution, synthesis, stimulated reactions, and motion by external renewable resources in both closed nanoconfinement and open surfaces. In this review, we summarize the state-of-the-art progress in physical and chemical reaction-based green energy conversion in LSI, including nanoscale fabrication, key mechanisms, applications, and limitations for practical implementation. The prospects for resolving critical challenges in this field and inspiring other promising research areas in the infancy stage (studying chemical and biological dynamics at the single-molecule level and nanofluidic neuromorphic computing) are also discussed.
Collapse
|
40
|
Engineered cellulose nanofibers membranes with oppositely charge characteristics for high-performance salinity gradient power generation by reverse electrodialysis. Int J Biol Macromol 2023; 253:126608. [PMID: 37652325 DOI: 10.1016/j.ijbiomac.2023.126608] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/15/2023] [Revised: 08/23/2023] [Accepted: 08/28/2023] [Indexed: 09/02/2023]
Abstract
Reverse electrodialysis (RED) using nanofluidic ion-selective membrane may convert the salinity difference between seawater and river water into electricity. However, heterogeneous modification reactions of cellulose commonly leads to the inhomogeneous distribution of surface charges, thereby hampering the improvement of cellulose-based nanofluidic membranes for energy conversion. Herein, RED devices based on cellulose nanofibers (CNF) membranes with opposite charge characteristics were developed for the generation of salinity gradient power. Anion-CNF membrane (A-CNF) with varying negative charge densities was synthesized using 2,2,6,6-Tetramethylpiperidine 1-oxy radical (TEMPO) oxidation modification, whereas cation-CNF membrane (C-CNF) was prepared through etherification. By mixing artificial seawater and river water, the output power density of CNF RED device is up to 2.87 W m-2. The output voltage of 30 RED units connected in series may reach up to 3.11 V, which can be used to directly power tiny electronic devices viz. LED lamp, calculator, etc. The results of this work provide a feasible possibility for widespread application of ion exchange membranes for salinity gradient energy harvesting.
Collapse
|
41
|
Artificial Sodium Channels for Enhanced Osmotic Energy Harvesting. J Am Chem Soc 2023; 145:28038-28048. [PMID: 38039312 DOI: 10.1021/jacs.3c08902] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/03/2023]
Abstract
Inspired by the ion channels of electric eels, we can use biomimetic nanofluidic materials to harvest the osmotic power released by mixing seawater and river water. While biological ion channels have both cation/anion and inter-cation selectivity, previous nanofluidic materials neglected the latter. As a result, NaCl solutions were generally used to simulate river water, ignoring the fact that the dominating cation in river water is typically Ca2+. In this work, we show that the different ionic compositions of seawater and river water can be exploited to improve osmotic power density by employing biomimetic sodium selective materials. Inspired by a range of properties of biological sodium channels, we constructed artificial sodium channels with zeolitic imidazolate framework-65 crystals, which selectively transport Na+ but almost completely block Ca2+. Resultantly, the effective concentration gradient of seawater/river water is dramatically increased by preventing the major cations in the river water from participating in the ion diffusion. As a result, the osmotic power density can be increased by more than 1 order of magnitude. These results should open new avenues to develop high-performance osmotic generators and may advance other applications based on biomimetic ion channels such as neuromorphic information processing.
Collapse
|
42
|
Ion Trapping and Thermionic Emission across Sub-nm Pores. NANO LETTERS 2023; 23:11719-11726. [PMID: 38078825 DOI: 10.1021/acs.nanolett.3c03592] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/28/2023]
Abstract
Ionic transport through a graphene biomimetic subnanometer (sub-nm) pore of arbitrary shape and realistically decorated by intrinsic negatively charged sites is investigated by all-atom molecular dynamics (MD) simulations. In the presence of external electric fields, cation trapping-assisted translocation occurs in the vicinity of the 2D subnanometer pore, while the anion current is blocked by the negative charges. The adsorbed cations in such asymmetrically charged nanopores are located on the top of the nanopore instead of blocking the pore, as suggested previously in highly symmetric pores such as crown ethers. Our analysis of the different types of energy involved in ion translocations indicates that electrostatics is the dominant factor controlling ion transfer across these sub-nm pores. A physical model based on the thermionic emission formalism to account for the free energy barriers to ion flow reproduces the I-V characteristics.
Collapse
|
43
|
In Situ Growth of MOF-303 Membranes onto Porous Anodic Aluminum Oxide Substrates for Harvesting Salinity-Gradient Energy. ACS APPLIED MATERIALS & INTERFACES 2023; 15:59463-59474. [PMID: 38099706 DOI: 10.1021/acsami.3c13935] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/28/2023]
Abstract
As an emerging metal-organic framework (MOF) material in recent years, the MOF-303 membrane has shown great potential applications in seawater desalination, dehydration, and atmospheric water harvesting. Herein, we report on a dense and uniform MOF-303 membrane fabricated by a facile in situ hydrothermal synthesis approach in the presence of an anodized aluminum oxide (AAO) channel membrane acting as the only Al source and substrate. Interestingly, the MOF-303 isomer can be obtained due to an insufficient amount of organic ligand caused by the less hydrophilic and larger pore size of the AAO substrate. The MOF-based composite membranes possessed surface-charge-governed ionic transport behavior. Moreover, the MOF-303/AAO membrane yielded an output power density of 1.87 W/m2 under a 50-fold KCl concentration gradient. Under a 50-fold gradient of artificial seawater and river water, a maximum power density of 1.46 W/m2 can be obtained. After 30 days of stability testing, the composite membrane still maintained the power output, and the power density was higher than 1.20 W/m2. This work provides a facile and effective strategy for constructing Al-based MOF composite membranes and boosts their applications in harvesting salinity-gradient energy.
Collapse
|
44
|
Light-Augmented Multi-ion Interaction in MXene Membrane for Simultaneous Water Treatment and Osmotic Power Generation. ACS NANO 2023; 17:25269-25278. [PMID: 38071658 DOI: 10.1021/acsnano.3c08487] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/27/2023]
Abstract
The mixing of wastewater and natural water releases abundant osmotic energy. Harvesting this energy could significantly reduce the energy and economic cost of water treatment, leading to sustainable wastewater treatment technology. Yet, such energy harvesting is highly challenging because it requires a material that is highly permeable to nontoxic ions while rejecting toxic ions in wastewater to reach high power density and prevent environmental pollution. In this work, we demonstrate that a light-augmented biomimetic multi-ion interaction in an MXene membrane can simultaneously realize high permeability of Na+ ions for enhanced osmotic power generation and high selectivity to heavy metal ions up to a ratio of 2050 for wastewater treatment. The Na+ permeability is enhanced by the photothermal effect of the MXene membrane. The transport of heavy metal ions, however, is suppressed because, under angstrom-confinement, heavy metal ions are strongly electrostatically repelled by the increased number of permeating Na+ ions. As a result, the membrane can stably generate osmotic power from simulated industrial wastewater, and the power density can be enhanced by 4 times under light illumination of approximate 1 sun intensity. This work highlights the importance of multi-ion interaction for the transport properties of ionic materials, which remains rarely investigated and poorly understood in previous studies.
Collapse
|
45
|
An efficient interfacial solar evaporator featuring a hierarchical porous structure entirely derived from waste cotton. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 903:166212. [PMID: 37567279 DOI: 10.1016/j.scitotenv.2023.166212] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/09/2023] [Revised: 07/23/2023] [Accepted: 08/08/2023] [Indexed: 08/13/2023]
Abstract
Interfacial solar evaporators are widely used to purify water. However, photothermal materials commonly constituting most interfacial solar evaporators remain expensive; additionally, the inherent structure of the evaporators limits their performance. Furthermore, the large amount of waste cotton produced by the textile industry is an environmental threat. To address these issues, we propose an interfacial solar evaporator, H-CA-CS, with a hierarchical porous structure. This evaporator is made entirely of waste cotton and uses carbon microspheres (CMS) and cellulose aerogel (CA) as photothermal and substrate materials, respectively. Additionally, its photothermal layer (CS layer) has large pores and a high porosity, which promote light absorption and timely vapor escape. In contrast, the water transport layer (CA layer) has small pores, providing a robust capillary effect for water transport. Combined with the outstanding light absorption properties of CMS, H-CA-CS exhibited superior overall performance. We found that H-CA-CS has an excellent evaporation rate (1.68 kg m-2 h-1) and an efficiency of 90.6 % under one solar illumination (1 kW m-2), which are superior to those of many waste-based solar evaporators. Moreover, H-CA-CS maintained a mean evaporation rate of 1.61 kg m-2 h-1, ensuring sustainable evaporation performance under long-term scenarios. Additionally, H-CA-CS can be used to purify seawater and various types of wastewater with removal efficiencies exceeding 99 %. In conclusion, this study proposes a method for efficiently using waste cotton to purify water and provides novel ideas for the high-value use of other waste fibers to further mitigate ongoing environmental degradation.
Collapse
|
46
|
Non-equilibrium molecular dynamics of steady-state fluid transport through a 2D membrane driven by a concentration gradient. J Chem Phys 2023; 159:214705. [PMID: 38038206 DOI: 10.1063/5.0178576] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/27/2023] [Accepted: 11/09/2023] [Indexed: 12/02/2023] Open
Abstract
We use a novel non-equilibrium algorithm to simulate steady-state fluid transport through a two-dimensional (2D) membrane due to a concentration gradient by molecular dynamics (MD) for the first time. We confirm that, as required by the Onsager reciprocal relations in the linear-response regime, the solution flux obtained using this algorithm agrees with the excess solute flux obtained from an established non-equilibrium MD algorithm for pressure-driven flow. In addition, we show that the concentration-gradient-driven solution flux in this regime is quantified far more efficiently by explicitly applying a transmembrane concentration difference using our algorithm than by applying Onsager reciprocity to pressure-driven flow. The simulated fluid fluxes are captured with reasonable quantitative accuracy by our previously derived continuum theory of concentration-gradient-driven fluid transport through a 2D membrane [D. J. Rankin, L. Bocquet, and D. M. Huang, J. Chem. Phys. 151, 044705 (2019)] for a wide range of solution and membrane parameters, even though the simulated pore sizes are only several times the size of the fluid particles. The simulations deviate from the theory for strong solute-membrane interactions relative to thermal energy, for which the theoretical approximations breakdown. Our findings will be beneficial for a molecular-level understanding of fluid transport driven by concentration gradients through membranes made from 2D materials, which have diverse applications in energy harvesting, molecular separations, and biosensing.
Collapse
|
47
|
Nanomechanical Sensing for Mass Flow Control in Nanowire-Based Open Nanofluidic Systems. ACS NANO 2023; 17:21044-21055. [PMID: 37903505 PMCID: PMC10655260 DOI: 10.1021/acsnano.3c04020] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/05/2023] [Revised: 10/16/2023] [Accepted: 10/19/2023] [Indexed: 11/01/2023]
Abstract
Open nanofluidic systems, where liquids flow along the outer surface of nanoscale structures, provide otherwise unfeasible capabilities for extremely miniaturized liquid handling applications. A critical step toward fully functional applications is to obtain quantitative mass flow control. We demonstrate the application of nanomechanical sensing for this purpose by integrating voltage-driven liquid flow along nanowire open channels with mass detection based on flexural resonators. This approach is validated by assembling the nanowires with microcantilever resonators, enabling high-precision control of larger flows, and by using the nanowires as resonators themselves, allowing extremely small liquid volume handling. Both implementations are demonstrated by characterizing voltage-driven flow of ionic liquids along the surface of the nanowires. We find a voltage range where mass flow rate follows a nonlinear monotonic increase, establishing a steady flow regime for which we show mass flow control at rates from below 1 ag/s to above 100 fg/s and precise liquid handling down to the zeptoliter scale. The observed behavior of mass flow rate is consistent with a voltage-induced transition from static wetting to dynamic spreading as the mechanism underlying liquid transport along the nanowires.
Collapse
|
48
|
Scaling of ionic conductance in a fluctuating single-layer nanoporous membrane. Sci Rep 2023; 13:19813. [PMID: 37957224 PMCID: PMC10643653 DOI: 10.1038/s41598-023-46962-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/17/2023] [Accepted: 11/07/2023] [Indexed: 11/15/2023] Open
Abstract
Single-layer membranes have emerged as promising candidates for applications requiring high transport rates due to their low resistance to molecular transport. Owing to their atomically thin structure, these membranes experience significant microscopic fluctuations, emphasizing the need to explore their impact on ion transport processes. In this study, we investigate the effects of membrane fluctuations on the elementary scaling behavior of ion conductance [Formula: see text] as a function of ion concentration [Formula: see text], represented as [Formula: see text], using molecular dynamics simulations. Our findings reveal that membrane fluctuations not only alter the conductance coefficient [Formula: see text] but also the power-law exponent [Formula: see text]. We identify two distinct frequency regimes of membrane fluctuations, GHz-scale and THz-scale fluctuations, and examine their roles in conductance scaling. Furthermore, we demonstrate that the alteration of conductance scaling arises from the non-linearity between ion conductance and membrane shape. This work provides a fundamental understanding of ion transport in fluctuating membranes.
Collapse
|
49
|
Surface diffusion enhanced ion transport through two-dimensional nanochannels. SCIENCE ADVANCES 2023; 9:eadi8493. [PMID: 37922345 PMCID: PMC10624347 DOI: 10.1126/sciadv.adi8493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/22/2023] [Accepted: 10/05/2023] [Indexed: 11/05/2023]
Abstract
Fast ion permeation in nanofluidic channels has been intensively investigated in the past few decades because of their potential uses in separation technologies and osmotic energy harvesting. Mechanisms governing ion transport at this ultimately small spatial regime remain to be understood, which can only be achieved in nanochannels that are controllably fabricated. Here, we report the fabrication of two-dimensional nanochannels with their top and bottom walls consisting of atomically flat graphite and mica crystals, respectively. The distinct wall structures and properties enable us to investigate interactions between ions and interior surfaces. We find an enhanced ion transport within the channels that is orders of magnitude faster than that in the bulk solutions. The result is attributed to the highly dense packing of adsorbed cations at mica surfaces, where they diffuse in-plane. Our work provides insights into surface effects on ion transport at the nanoscale.
Collapse
|
50
|
Thermodynamic Window for Size-Controlled Pore Formation in Graphene for Large-Scale Molecular Sieves. J Phys Chem Lett 2023; 14:9758-9765. [PMID: 37882468 DOI: 10.1021/acs.jpclett.3c02186] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2023]
Abstract
Nanopores in graphene monolayers are a promising option for molecular separation applications, such as desalination and carbon capture. Graphene's atomic thickness allows for an optimal balance between molecular selectivity and permeability, while its chemical stability and robust mechanical properties make it appealing for a wide range of commercial applications. However, scaling to large areas with controlled pore size distribution is an open challenge in ultrathin membranes. Here, using first-principles calculations, we identify a suitable thermodynamic window in a chemical vapor deposition system for directly growing graphene monolayers with a controlled pore size distribution. As an example, our calculations show that a postgrowth annealing step with a supersaturation range of 19.7-25 kJ/mol at 1000 K results in the creation of a controllable pore density at graphene grain boundaries, with pore sizes falling within the range of 5-8 Å. Such pores isolate hydrated Cl ions from water molecules, effectively desalinating seawater. Thus, it allows the design of targeted synthesis of large-scale 2D layers for membrane applications.
Collapse
|