Vibrational dynamics and surface structure of amorphous selenium

Decoupling the influence of NOx in flue gas on the application of nano-amorphous selenium for mercury removal

Nitrogen oxides are inevitable hazardous components in coal-fired flue gas. This study designed a series of experiments and combined theoretical calculations to systematically investigate the effect of NOx on the removal of element mercury (Hg0) by nano-amorphous selenium (nano-a-Se). It was found that the impact of NOx on the removal of Hg0 by nano-a-Se primarily involves two mechanisms: competitive adsorption between NOx and Hg0, and the induced reduction effect of NOx on chemisorbed mercury (HgSe). NO inhibits the removal of Hg0 by nano-a-Se, and competitive adsorption is identified as the main influencing factor. Whereas the inhibitory effect of NO2 on the adsorption of Hg0 by nano a-Se can be counteracted due to its oxidizing effect on Hg0. Therefore, although NO2 presents stronger competitiveness than NO in the competitive adsorption with Hg0, it still shows a promoting effect on Hg0 removal, with 50 ppm NO2 restoring 5.7 % of the Hg0 removal efficiency. Additionally, the mechanism of NOx-induced reduction of HgSe was investigated in detail. NO2 is more capable of inducing the reduction of Hg(II) from HgSe to Hg0. This study presents new insights into the underlying influence mechanism, which could provide valuable references for the application of other selenium-based adsorbents.

Deep insight into regulation mechanism of band distribution in phase junction CdS for enhanced photocatalytic H2 production

An in-depth understanding of structure-activity relationship between the phase constitution and solar-to-hydrogen (STH) conversion efficiency is conducive to guiding the optimization route of targeted photocatalyst candidates, further establishing advanced photocatalytic systems. Herein, based on the concept of phase engineering, we encompassed the crystalline phase of CdS and achieved precise regulation of phase proportion as well as phase boundary width in the phase junction for the first time. The above cooperative effect not only modifies energy band distribution for sufficient redox potentials, but also guarantees the reverse migration orientation of photogenerated carriers in phase junction, thereby endowing photocarriers with a prolonged lifetime. Compared to pure cubic or hexagonal phase (72.6 or 101.1 μmol h-1 g-1), this CdS system with optimized phase junction demonstrates an improved photocatalytic hydrogen evolution activity of 1.04 mmol h-1 g-1 and favorable stability without cocatalyst assistance, which mainly stems from an efficient protons reduction process interacting with long-lived photogenerated electrons. This research explores the mechanism behind phase regulation and its relationship with junction capability, providing a powerful strategy to manipulate crystal phase distribution and paving a feasible avenue for other phase-dependent photocatalysts towards rational design of heterostructures based on different phases in solar energy conversion field.

Peroxide activation by selenium-doped graphite

Selenium-doped graphitic material has shown GPx-like activity and carried out epoxidation of various aromatic and aliphatic alkenes using H2O2, a green oxidant.

Melt-quenched and as-deposited structures of amorphous selenium: a density functional/ molecular dynamics comparison

Molecular dynamics simulations using a density functional description of energies and forces have been carried out for a model of an as-deposited (AD) surface of amorphous selenium. The deposition model assumed the annealing (at 400 K) of layers of randomly located single atoms, followed by compression to the density used in earlier melt-quenched (MQ) simulations of amorphous Se, and by further annealing. The AD and MQ structures are predominantly twofold coordinated and similar, for example in the pair distribution functions, with notable differences: the AD structures have more defects (atoms with one and three neighbours), and the ring distributions differ. These differences are also reflected in the electronic structures of the AD and MQ samples, where the increased presence of defects in the former influences the Bader charges and the edge states of the band gap. The dominance of rings found in a previous simulation of AD structures is not found.

Impact of the Microbial Origin and Active Microenvironment on the Shape of Biogenic Elemental Selenium Nanomaterials

The shape of nanomaterials affects their colloidal properties, cellular uptake, and fate in the environment. The microbial origin and microenvironment can play a role in altering the shape of the nanomaterial. However, such studies have never been conducted. Here, we demonstrate that the selenium nanomaterials produced by Escherichia coli K-12 are stable and remain as BioSe-Nanospheres under thermophilic conditions, while those produced by anaerobic granular sludge transform to BioSe-Nanorods, due to a lower quantity of proteins coating these nanoparticles, which has been verified by proteomics analysis as well as using chemically synthesized selenium nanomaterials. Furthermore, the presence of Bacillus safensis JG-B5T transform the purified BioSe-Nanospheres produced by E. coli K-12 to BioSe-Nanorods, though they are not transformed in the absence of B. safensis JG-B5T. This is due to the production of peptidases by B. safensis JG-B5T that cleaves the protein coating the BioSe-Nanospheres produced by E. coli K-12, leading to their transformation to trigonal BioSe-Nanorods, which is the thermodynamically more stable state. These findings suggest that the fate of selenium and probably other redox-active elements released from the biological wastewater treatment units needs to be reevaluated and improved by including microbial criteria for better accuracy.

Polyamorphism of vapor-deposited amorphous selenium in response to light

Enhanced surface mobility is critical in producing stable glasses during physical vapor deposition. In amorphous selenium (a-Se) both the structure and dynamics of the surface can be altered when exposed to above-bandgap light. Here we investigate the effect of light on the properties of vapor-deposited a-Se glasses at a range of substrate temperatures and deposition rates. We demonstrate that deposition both under white light illumination and in the dark results in thermally and kinetically stable glasses. Compared to glasses deposited in the dark, stable a-Se glasses formed under white light have reduced thermal stability, as measured by lower density change, but show significantly improved kinetic stability, measured as higher onset temperature for transformation. While light induces enhanced mobility that penetrates deep into the surface, resulting in lower density during vapor deposition, it also acts to form more networked structures at the surface, which results in a state that is kinetically more stable with larger optical birefringence. We demonstrate that the structure formed during deposition with light is a state that is not accessible through liquid quenching, aging, or vapor deposition in the dark, indicating the formation of a unique amorphous solid state.

Tracking the Connection between Disorder and Energy Landscape in Glasses Using Geologically Hyperaged Amber

Fossil amber offers the unique opportunity to investigate an amorphous material that has been exploring its energy landscape for more than 110 million years of natural aging. By applying different X-ray scattering methods to amber before and after annealing the sample to erase its thermal history, we identify a link between the potential energy landscape and the structural and vibrational properties of glasses. We find that hyperaging induces a depletion of the vibrational density of states in the terahertz region, also ruling the sound dispersion and attenuation properties of the corresponding acoustic waves. Critically, this is accompanied by a densification with structural implications different in nature from that caused by hydrostatic compression. Our results, rationalized within the framework of fluctuating elasticity theory, reveal how upon approaching the bottom of the potential energy landscape (9% decrease in the fictive temperature) the elastic matrix becomes increasingly less disordered (6%) and longer-range correlated (22%).

Proteins in microbial synthesis of selenium nanoparticles

Biogenic formation of nano-sized particles composed of various materials (in particular, selenium) by live microorganisms is widespread in nature. This phenomenon has been increasingly attracting the attention of researchers over the last decade not only owing to a range of diverse applications of such nanoparticles (NPs) in nanobiotechnology, but also because of the specificity of methodologies and mechanisms of NPs formation related to "green synthesis". In this mini-review, recent data are discussed on the multifaceted role of proteins in the processes of microbial reduction of selenium oxyanions and the formation of Se NPs. Besides the involvement of proteins in reducing selenites and selenates, their participation in the microbially driven growth and stabilisation of Se NPs is analysed, which results in the formation of unique nanostructured materials differing from those obtained chemically. This mini-review is thus focussed on proteins involved in microbial synthesis of Se NPs and on instrumental analysis of these processes and their products (biogenic nanostructured selenium particles functionalised by a surface-capping layer of various biomacromolecules).

Progress toward clonable inorganic nanoparticles

Pseudomonas moraviensis stanleyae was recently isolated from the roots of the selenium (Se) hyperaccumulator plant Stanleya pinnata. This bacterium tolerates normally lethal concentrations of SeO3(2-) in liquid culture, where it also produces Se nanoparticles. Structure and cellular ultrastructure of the Se nanoparticles as determined by cellular electron tomography shows the nanoparticles as intracellular, of narrow dispersity, symmetrically irregular and without any observable membrane or structured protein shell. Protein mass spectrometry of a fractionated soluble cytosolic material with selenite reducing capability identified nitrite reductase and glutathione reductase homologues as NADPH dependent candidate enzymes for the reduction of selenite to zerovalent Se nanoparticles. In vitro experiments with commercially sourced glutathione reductase revealed that the enzyme can reduce SeO3(2-) (selenite) to Se nanoparticles in an NADPH-dependent process. The disappearance of the enzyme as determined by protein assay during nanoparticle formation suggests that glutathione reductase is associated with or possibly entombed in the nanoparticles whose formation it catalyzes. Chemically dissolving the nanoparticles releases the enzyme. The size of the nanoparticles varies with SeO3(2-) concentration, varying in size form 5 nm diameter when formed at 1.0 μM [SeO3(2-)] to 50 nm maximum diameter when formed at 100 μM [SeO3(2-)]. In aggregate, we suggest that glutathione reductase possesses the key attributes of a clonable nanoparticle system: ion reduction, nanoparticle retention and size control of the nanoparticle at the enzyme site.

Probing of 2 dimensional confinement-induced structural transitions in amorphous oxide thin film

Whereas the atomic structure of surface of crystals is known to be distinct from that of bulk, experimental evidence for thickness-induced structural transitions in amorphous oxides is lacking. We report the NMR result for amorphous alumina with varying thickness from bulk up to 5 nm, revealing the nature of structural transitions near amorphous oxide surfaces/interfaces. The coordination environments in the confined amorphous alumina thin film are distinct from those of bulk, highlighted by a decrease in the fractions of high-energy clusters (and thus the degree of disorder) with thickness. The result implies that a wide range of variations in amorphous structures may be identified by controlling its dimensionality.

Laser-assisted growth of t-Te nanotubes and their controlled photo-induced unzipping to ultrathin core-Te/sheath-TeO(2) nanowires

One dimensional (1D) nanostructures of semiconducting oxides and elemental chalcogens culminate over the last decade in nanotechnology owing to their unique properties exploitable in several applications sectors. Whereas several synthetic strategies have been established for rational design of 1D materials using solution chemistry and high temperature evaporation methods, much less attention has been given to the laser-assisted growth of hybrid nanostructures. Here, we present a laser-assisted method for the controlled fabrication of Te nanotubes. A series of light-driven phase transition is employed to controllably transform Te nanotubes to core-Te/sheath-TeO₂ and/or even neat TeO₂ nanowires. This solid-state laser-processing of semiconducting materials apart from offering new opportunities for the fast and spatially controlled fabrication of anisotropic nanostructures, provides a means of simultaneous growing and integrating these nanostructures into an optoelectronic or photonic device.