Tuning graphitic oxide for initiator- and metal-free aerobic epoxidation of linear alkenes

Modulating Charges of Dual Sites in Multivariate Metal-Organic Frameworks for Boosting Selective Aerobic Epoxidation of Alkenes

Selective aerobic epoxidation of alkenes without any additives is of great industrial importance but still challenging because the competitive side reactions including C═C bond cleavage and isomerization are difficult to avoid. Here, we show fabricating Cu(I) single sites in pristine multivariate metal-organic frameworks (known as CuCo-MOF-74) via partial reduction of Cu(II) to Cu(I) ions during solvothermal reaction. Impressively, CuCo-MOF-74 is characteristic with single Cu(I), Cu(II), and Co(II) sites, and they exhibit the substantially enhanced selectivity of styrene oxide up to 87.6% using air as an oxidant at almost complete conversion of styrene, ∼25.8% selectivity increased over Co-MOF-74, as well as good catalytic stability. Contrast experiments and theoretical calculation indicate that Cu(I) sites contribute to the substantially enhanced selectivity of epoxides catalyzed by Co(II) sites. The adsorption of two O₂ molecules on dual Co(II) and Cu(I) sites is favorable, and the projected density of state of the Co-3d orbital is closer to the Fermi level by modulating with Cu(I) sites for promoting the activation of O₂ compared with dual-site Cu(II) and Co(II) and Co(II) and Co(II), thus contributing to the epoxidation of the C═C bond. When other kinds of alkenes are used as substrates, the excellent selectivity of various epoxides is also achieved over CuCo-MOF-74. We also prove the universality of fabricating Cu(I) sites in other MOF-74 with various divalent metal nodes.

Metal-free carbocatalyst for room temperature acceptorless dehydrogenation of N-heterocycles

Catalytic dehydrogenation enables reversible hydrogen storage in liquid organics as a critical technology to achieve carbon neutrality. However, oxidant or base-free catalytic dehydrogenation at mild temperatures remains a challenge. Here, we demonstrate a metal-free carbocatalyst, nitrogen-assembly carbons (NCs), for acceptorless dehydrogenation of N-heterocycles even at ambient temperature, showing greater activity than transition metal-based catalysts. Mechanistic studies indicate that the observed catalytic activity of NCs is because of the unique closely placed graphitic nitrogens (CGNs), formed by the assembly of precursors during the carbonization process. The CGN site catalyzes the activation of C─H bonds in N-heterocycles to form labile C─H bonds on catalyst surface. The subsequent facile recombination of this surface hydrogen to desorb H₂ allows the NCs to work without any H-acceptor. With reverse transfer hydrogenation of various N-heterocycles demonstrated in this work, these NC catalysts, without precious metals, exhibit great potential for completing the cycle of hydrogen storage.

Surface modification and characterization of waste derived carbon particles to reinforce photo-cured shape memory composites

Carbon fillers have been a source of inspiration to accommodate a range of surface chemistries for different applications. In this study different surface chemistries have been compared for shape memory effect on polymeric composites. Sugar industry waste (fly ash) has been utilized to prepare carbon particles named FCB. Surface modification of FCB has been done in two steps, oxidation and thiolation, respectively. In the first step, different reagents have been used to anchor the surface of FCB with oxygenated functionalities. In the second step, oxygenated FCB has been treated with a thiolating agent to covalently link thio groups on its surface. Polymeric composites have been photo cured with both types of particles, separately. A thermal actuation study has been carried out to check the shape recovery behavior of the composites. A quick shape recovery has been observed for thiolated FCB composites, due to thio linkages in the polymeric network. Samples have been characterized by scanning electron microscopy (SEM), attenuated total reflectance (ATR), dynamic light scattering (DLS), thermal gravimetric analysis (TGA), pH, conductivity, acid content particle dispersion, and composite gel content.

Carbon fillers have been a source of inspiration to accommodate a range of surface chemistries for different applications.

Ag supported on alumina for the epoxidation of 1-hexene with molecular oxygen: the effect of Ag+/Ag0

The catalytic liquid-phase oxidation of 1-hexene with O2 using Ag/porous bowl-shaped alumina shows good selectivity for the epoxidation product.

Controlling the transverse proton relaxivity of magnetic graphene oxide

The engineering of materials with controlled magnetic properties by means other than a magnetic field is of great interest in nanotechnology. In this study, we report engineered magnetic graphene oxide (MGO) in the nanocomposite form of iron oxide nanoparticles (IO)-graphene oxide (GO) with tunable core magnetism and magnetic resonance transverse relaxivity (r₂). These tunable properties are obtained by varying the IO content on GO. The MGO series exhibits r₂ values analogous to those observed in conventional single core and cluster forms of IO in different size regimes-motional averaging regime (MAR), static dephasing regime (SDR), and echo-limiting regime (ELR) or slow motion regime (SMR). The maximum r₂ of 162 ± 5.703 mM^-1s^-1 is attained for MGO with 28 weight percent (wt%) content of IO on GO and hydrodynamic diameter of 414 nm, which is associated with the SDR. These findings demonstrate the clear potential of magnetic graphene oxide for magnetic resonance imaging (MRI) applications.

Chemical Approach to Ultrastiff, Strong, and Environmentally Stable Graphene Films

Reduced graphene oxide (rGO) sheets prepared by a modified Hofmann method (Ho-rGO) have large graphitic domains with few structural defects, facilitating the dense packing between rGO sheets to enhance the mechanical performances of the resultant graphene films. Graphene films are fabricated by the filtration of the aqueous dispersions of Ho-rGO sheets and further treated by thermal annealing. They display high moduli (stiffness) of 54.6 ± 1.4 GPa and high tensile strengths of 521 ± 19 MPa. They also exhibit high toughness and good electrical properties. The intact structure of Ho-rGO sheets narrows the nanochannels in the film matrices, greatly reducing the water infiltration into films and providing the graphene films with excellent environmental stability. These graphene films are attractive for practical applications because of their light weights and ultrastiff and ultrastrong mechanical properties.

Oxidative Carboxylation of 1-Decene to 1,2-Decylene Carbonate

Cyclic carbonates are valuable chemicals for the chemical industry and thus, their efficient synthesis is essential. Commonly, cyclic carbonates are synthesised in a two-step process involving the epoxidation of an alkene and a subsequent carboxylation to the cyclic carbonate. To couple both steps into a direct oxidative carboxylation reaction would be desired from an economical view point since additional work-up procedures can be avoided. Furthermore, the efficient sequestration of CO₂, a major greenhouse gas, would also be highly desirable. In this work, the oxidative carboxylation of 1-decene is investigated using supported gold catalysts for the epoxidation step and tetrabutylammonium bromide in combination with zinc bromide for the cycloaddition of carbon dioxide in the second step. The compatibility of the catalysts for both steps is explored and a detailed study of catalyst deactivation using X-ray photoelectron spectroscopy and scanning electron microscopy is reported. Promising selectivity of the 1,2-decylene carbonate is observed using a one-pot two-step approach.

N-Doped porous carbon nanotubes: synthesis and application in catalysis

Hierarchically porous nitrogen-doped carbon nanotubes were prepared; they exhibited high catalytic efficiency for C–H arylation, hydrogen transfer and oxidation reactions.