Enhanced ordering temperatures in antiferromagnetic manganite superlattices

Hidden chemical order in disordered Ba7Nb4MoO20 revealed by resonant X-ray diffraction and solid-state NMR

The chemical order and disorder of solids have a decisive influence on the material properties. There are numerous materials exhibiting chemical order/disorder of atoms with similar X-ray atomic scattering factors and similar neutron scattering lengths. It is difficult to investigate such order/disorder hidden in the data obtained from conventional diffraction methods. Herein, we quantitatively determined the Mo/Nb order in the high ion conductor Ba₇Nb₄MoO₂₀ by a technique combining resonant X-ray diffraction, solid-state nuclear magnetic resonance (NMR) and first-principle calculations. NMR provided direct evidence that Mo atoms occupy only the M2 site near the intrinsically oxygen-deficient ion-conducting layer. Resonant X-ray diffraction determined the occupancy factors of Mo atoms at the M2 and other sites to be 0.50 and 0.00, respectively. These findings provide a basis for the development of ion conductors. This combined technique would open a new avenue for in-depth investigation of the hidden chemical order/disorder in materials.

Emergent Magnetic Fan Structures in Manganite Homojunction Arrays

Devices with tunable magnetic noncollinearity are important components of superconducting electronics and spintronics, but they typically require epitaxial integration of several complex materials. The spin-polarized neutron reflectometry measurements on La_1-x Sr_x MnO₃ homojunction arrays with modulated Sr concentration reported herein have led to the discovery of magnetic fan structures with highly noncollinear alignment of Mn spins and an emergent periodicity twice as large as the array's unit cell. The neutron data show that these magnetic superstructures can be fully long-range ordered, despite the gradual modulation of the doping level created by charge transfer and chemical intermixing. The degree of noncollinearity can be effectively adjusted by low magnetic fields. Notwithstanding their chemical and structural simplicity, oxide homojunctions thus show considerable promise as a platform for tunable complex magnetism and as a powerful design element of spintronic devices.

Pulsed laser deposition of large-sized superlattice films with high uniformity

Oxide superlattices often exhibit emergent physical properties that are desirable for future information device applications. The most common growth technique for fabrication of oxide superlattices is pulsed laser deposition (PLD), which is convenient yet powerful for the growth of various oxide superlattices. However, the sample size prepared by PLD is rather small confined by the plasmon plume, which greatly limits its potential for device applications. Here, we design a PLD system that is capable of fabricating large-sized oxide superlattices with high uniformity. Specifically, during growth, the laser beam scans the target surface by combining the pitch and yaw angle rotation of the high reflective mirror and the linear motion of the focus lens. A SiC susceptor is placed in between the sample holder and the substrate to improve the large area infrared heating efficiency. Using such a system, droplet-free 10 × 10 mm² [(LSMO)₁₂/(PCMO)₆]₇ superlattices are epitaxially grown with the same period of superlattices across the whole sample areas. The high uniformity of the superlattices is further illustrated by near identical physical properties of all regions of the superlattice films. The present PLD system can be used to grow various kinds of oxide superlattices with the area size as large as 2 in., which is highly useful for device applications of oxides.

Emergent Magnetic Phenomenon with Unconventional Structure in Epitaxial Manganate Thin Films

A variety of emergent phenomena are enabled by interface engineering in the complex oxides heterostructures. While extensive attention is attracted to LaMnO3 (LMO) thin films for observing the control of functionalities at its interface with substrate, the nature of the magnetic phases in the thin film is, however, controversial. Here, it is reported that the ferromagnetism in two and five unit cells thick LMO films epitaxially deposited on (001)-SrTiO3 substrates, a ferromagnetic/ferromagnetic coupling in eight and ten unit cells ones, and a striking ferromagnetic/antiferromagnetic pinning effect with apparent positive exchange bias in 15 and 20 unit cells ones are observed. This novel phenomenon in both 15 and 20 unit cells films indicates a coexistence of three magnetic orderings in a single LMO film. The high-resolution scanning transmission electron microscopy suggests a P21/n to Pbnm symmetry transition from interface to surface, with the spatial stratification of MnO6 octahedral morphology, corresponding to different magnetic orderings. These results can shed some new lights on manipulating the functionality of oxides by interface engineering.

Site-specific spectroscopic measurement of spin and charge in (LuFeO3)m/(LuFe2O4)1 multiferroic superlattices

Interface materials offer a means to achieve electrical control of ferrimagnetism at room temperature as was recently demonstrated in (LuFeO3)m/(LuFe2O4)1 superlattices. A challenge to understanding the inner workings of these complex magnetoelectric multiferroics is the multitude of distinct Fe centres and their associated environments. This is because macroscopic techniques characterize average responses rather than the role of individual iron centres. Here, we combine optical absorption, magnetic circular dichroism and first-principles calculations to uncover the origin of high-temperature magnetism in these superlattices and the charge-ordering pattern in the m = 3 member. In a significant conceptual advance, interface spectra establish how Lu-layer distortion selectively enhances the Fe2+ →  Fe3+ charge-transfer contribution in the spin-up channel, strengthens the exchange interactions and increases the Curie temperature. Comparison of predicted and measured spectra also identifies a non-polar charge ordering arrangement in the LuFe2O4 layer. This site-specific spectroscopic approach opens the door to understanding engineered materials with multiple metal centres and strong entanglement.

Hole-Trapping-Induced Stabilization of Ni4 + in SrNiO3 /LaFeO3 Superlattices

Creating new functionality in materials containing transition metals is predicated on the ability to control the associated charge states. For a given transition metal, there is an upper limit on valence that is not exceeded under normal conditions. Here, it is demonstrated that this limit of 3+ for Ni and Fe can be exceeded via synthesis of (SrNiO₃ )_m /(LaFeO₃ )_n superlattices by tuning n and m. The Goldschmidt tolerance constraints are lifted, and SrNi⁴⁺ O₃ with holes on adjacent O anions is stabilized as a perovskite at the single-unit-cell level (m = 1). Holding m = 1, spectroscopy reveals that the n = 1 superlattice contains Ni³⁺ and Fe⁴⁺ , whereas Ni⁴⁺ and Fe³⁺ are observed in the n = 5 superlattice. It is revealed that the B-site cation valences can be tuned by controlling the magnitude of the FeO₆ octahedral rotations, which, in turn, determine the energy balance between Ni³⁺ /Fe⁴⁺ and Ni⁴⁺ /Fe³⁺ , thus controlling emergent electrical properties such as the band alignment and resulting hole confinement. This approach can be extended to other systems for synthesizing novel, metastable layered structures with new functionalities.

Misfit Relaxation Mechanisms and Domain Ordering in Anisotropically Strained Manganite Thin Films

The evolution of anisotropic strain in epitaxial Pr_0.5Sr_0.5MnO₃ films grown on (LaAlO₃)_0.3(SrAl_0.5Ta_0.5O₃)_0.7(110) substrates has been characterized by off-specular X-ray reciprocal space mappings on the (130), (310), (222), and (222̅) reflections in the scattering zone containing the [110] axis. We demonstrate that a multistage hierarchical structural evolution (single-domain-like structure, domain ordering, twin domains, and/or periodic structural modulations) occurs as the film thickness increases, and the structural modulation between the two transverse in-plane [11̅0] and [001] directions is quite different due to the monoclinic distortion of the film. We then show the relationship between the distribution of diffraction spots in reciprocal space and their corresponding domain configurations in real space under various thicknesses, which is closely correlated with thickness-dependent magnetic and magnetotransport properties. More importantly, the distribution and annihilation dynamics of the domain ordering are imaged utilizing home-built magnetic force microscope, revealing that the structural domains tilted toward either the [001] or [001̅] direction are arranged along the [11̅1] and [1̅11] crystal orientations. The direct visualization and dynamics of anisotropic-strain-related domain ordering will open a new path toward the control and manipulation of domain engineering in strongly correlated perovskite oxide films.

Direct experimental evidence of physical origin of electronic phase separation in manganites

Electronic phase separation in complex oxides is the inhomogeneous spatial distribution of electronic phases, involving length scales much larger than those of structural defects or nonuniform distribution of chemical dopants. While experimental efforts focused on phase separation and established its correlation with nonlinear responses under external stimuli, it remains controversial whether phase separation requires quenched disorder for its realization. Early theory predicted that if perfectly "clean" samples could be grown, both phase separation and nonlinearities would be replaced by a bicritical-like phase diagram. Here, using a layer-by-layer superlattice growth technique we fabricate a fully chemically ordered "tricolor" manganite superlattice, and compare its properties with those of isovalent alloyed manganite films. Remarkably, the fully ordered manganite does not exhibit phase separation, while its presence is pronounced in the alloy. This suggests that chemical-doping-induced disorder is crucial to stabilize the potentially useful nonlinear responses of manganites, as theory predicted.

Interface Engineering and Emergent Phenomena in Oxide Heterostructures

Complex oxide interfaces have mesmerized the scientific community in the last decade due to the possibility of creating tunable novel multifunctionalities, which are possible owing to the strong interaction among charge, spin, orbital, and structural degrees of freedom. Artificial interfacial modifications, which include defects, formal polarization, structural symmetry breaking, and interlayer interaction, have led to novel properties in various complex oxide heterostructures. These emergent phenomena not only serve as a platform for investigating strong electronic correlations in low-dimensional systems but also provide potentials for exploring next-generation electronic devices with high functionality. Herein, some recently developed strategies in engineering functional oxide interfaces and their emergent properties are reviewed.

Probing Quantum Confinement and Electronic Structure at Polar Oxide Interfaces

Polar discontinuities occurring at interfaces between two materials constitute both a challenge and an opportunity in the study and application of a variety of devices. In order to cure the large electric field occurring in such structures, a reconfiguration of the charge landscape sets in at the interface via chemical modifications, adsorbates, or charge transfer. In the latter case, one may expect a local electronic doping of one material: one example is the two-dimensional electron liquid (2DEL) appearing in SrTiO3 once covered by a polar LaAlO3 layer. Here, it is shown that tuning the formal polarization of a (La,Al)1-x (Sr,Ti) x O3 (LASTO:x) overlayer modifies the quantum confinement of the 2DEL in SrTiO3 and its electronic band structure. The analysis of the behavior in magnetic field of superconducting field-effect devices reveals, in agreement with ab initio calculations and self-consistent Poisson-Schrödinger modeling, that quantum confinement and energy splitting between electronic bands of different symmetries strongly depend on the interface total charge densities. These results strongly support the polar discontinuity mechanisms with a full charge transfer to explain the origin of the 2DEL at the celebrated LaAlO3/SrTiO3 interface and demonstrate an effective tool for tailoring the electronic structure at oxide interfaces.

Symmetry mismatch-driven perpendicular magnetic anisotropy for perovskite/brownmillerite heterostructures

Grouping different transition metal oxides together by interface engineering is an important route toward emergent phenomenon. While most of the previous works focused on the interface effects in perovskite/perovskite heterostructures, here we reported on a symmetry mismatch-driven spin reorientation toward perpendicular magnetic anisotropy in perovskite/brownmillerite heterostructures, which is scarcely seen in tensile perovskite/perovskite heterostructures. We show that alternately stacking perovskite La_2/3Sr_1/3MnO₃ and brownmillerite LaCoO_2.5 causes a strong interface reconstruction due to symmetry discontinuity at interface: neighboring MnO₆ octahedra and CoO₄ tetrahedra at the perovskite/brownmillerite interface cooperatively relax in a manner that is unavailable for perovskite/perovskite interface, leading to distinct orbital reconstructions and thus the perpendicular magnetic anisotropy. Moreover, the perpendicular magnetic anisotropy is robust, with an anisotropy constant two orders of magnitude greater than the in-plane anisotropy of the perovskite/perovskite interface. The present work demonstrates the great potential of symmetry engineering in designing artificial materials on demand.

Complex oxide heterostructures exhibit multifunctional behaviour that could be used in a range of device applications. Here, the authors observe that reconstruction at oxide perovskite/brownmillerite interfaces leads to perpendicular magnetic spin orientation, with potential use in spintronic devices.

Engineering magnetism at functional oxides interfaces: manganites and beyond

The family of transition metal oxides (TMOs) is a large class of magnetic materials that has been intensively studied due to the rich physics involved as well as the promising potential applications in next generation electronic devices. In TMOs, the spin, charge, orbital and lattice are strongly coupled, and significant advances have been achieved to engineer the magnetism by different routes that manipulate these degrees of freedom. The family of manganites is a model system of strongly correlated magnetic TMOs. In this review, using manganites thin films and the heterostructures in conjunction with other TMOs as model systems, we review the recent progress of engineering magnetism in TMOs. We first discuss the role of the lattice that includes the epitaxial strain and the interface structural coupling. Then we look into the role of charge, focusing on the interface charge modulation. Having demonstrated the static effects, we continue to review the research on dynamical control of magnetism by electric field. Next, we review recent advances in heterostructures comprised of high T _c cuprate superconductors and manganites. Following that, we discuss the emergent magnetic phenomena at interfaces between 3d TMOs and 5d TMOs with strong spin-orbit coupling. Finally, we provide our outlook for prospective future directions.

Charge transfer driven emergent phenomena in oxide heterostructures

Complex oxides exhibit many intriguing phenomena, including metal-insulator transition, ferroelectricity/multiferroicity, colossal magnetoresistance and high transition temperature superconductivity. Advances in epitaxial thin film growth techniques enable us to combine different complex oxides with atomic precision and form an oxide heterostructure. Recent theoretical and experimental work has shown that charge transfer across oxide interfaces generally occurs and leads to a great diversity of emergent interfacial properties which are not exhibited by bulk constituents. In this report, we review mechanisms and physical consequence of charge transfer across interfaces in oxide heterostructures. Both theoretical proposals and experimental measurements of various oxide heterostructures are discussed and compared. We also review the theoretical methods that are used to calculate charge transfer across oxide interfaces and discuss the success and challenges in theory. Finally, we present a summary and perspectives for future research.

Interfacial Coupling-Induced Ferromagnetic Insulator Phase in Manganite Film

Interfaces with subtle differences in atomic and electronic structures in perovskite ABO3 heterostructures often yield intriguingly different properties, yet their exact roles remain elusive. Here, we report an integrated study of unusual transport, magnetic, and structural properties of Pr0.67Sr0.33MnO3 film on SrTiO3 substrate. The variations in the out-of-plane lattice constant and BO6 octahedral rotation across the Pr0.67Sr0.33MnO3/SrTiO3 interface strongly depend on the thickness of the Pr0.67Sr0.33MnO3 film. In the 12 nm film, a new interface-sensitive ferromagnetic polaronic insulator (FI') phase is formed during the cubic-to-tetragonal phase transition of SrTiO3, apparently due to the enhanced electron-phonon interaction and atomic disorder in the film. The transport properties of the FI' phase in the 30 nm film are masked because of the reduced interfacial coupling and smaller interface-to-volume ratio. This work demonstrates how thickness-dependent interfacial coupling leads to the formation of a theoretically predicted ferromagnetic-polaronic insulator, as illustrated in a new phase diagram, that is otherwise ferromagnetic metal (FM) in bulk form.

Chemical ordering suppresses large-scale electronic phase separation in doped manganites

For strongly correlated oxides, it has been a long-standing issue regarding the role of the chemical ordering of the dopants on the physical properties. Here, using unit cell by unit cell superlattice growth technique, we determine the role of chemical ordering of the Pr dopant in a colossal magnetoresistant (La(1-y)Pr(y))(1-x)Ca(x)MnO3 (LPCMO) system, which has been well known for its large length-scale electronic phase separation phenomena. Our experimental results show that the chemical ordering of Pr leads to marked reduction of the length scale of electronic phase separations. Moreover, compared with the conventional Pr-disordered LPCMO system, the Pr-ordered LPCMO system has a metal-insulator transition that is ∼100 K higher because the ferromagnetic metallic phase is more dominant at all temperatures below the Curie temperature.

Direct Observation of Magnetic-Ion Off-Centering-Induced Ferroelectricity in Multiferroic Manganite Pr(Sr0.1Ca0.9)2 Mn2O7

Ferroelectricity in multiferroic Pr(Sr0.1 Ca0.9)2 Mn2 O7 is found to originate from the off-centering of Mn ions. This polar displacement is energetically stabilized by the cooperative interplay of lattice deformation induced by orbital ordering and oxygen octahedral tilting. This mechanism implies that magnetism and ferroelectricity arise from the same magnetic ions, providing direct evidence for the magnetic-ion off-centering-driven ferroelectricity.

Interfacial magnetism in complex oxide heterostructures probed by neutrons and x-rays

Magnetic complex-oxide heterostructures are of keen interest because a wealth of phenomena at the interface of dissimilar materials can give rise to fundamentally new physics and potentially valuable functionalities. Altered magnetization, novel magnetic coupling and emergent interfacial magnetism at the epitaxial layered-oxide interfaces are under intensive investigation, which shapes our understanding on how to utilize those materials, particularly for spintronics. Neutron and x-ray based techniques have played a decisive role in characterizing interfacial magnetic structures and clarifying the underlying physics in this rapidly developing field. Here we review some recent experimental results, with an emphasis on those studied via polarized neutron reflectometery and polarized x-ray absorption spectroscopy. We conclude with some perspectives.

Phase control of a perovskite transition-metal oxide through oxygen displacement at the heterointerface

We overview investigations highlighting the significance of interface engineering of oxygen displacement as a tool for phase control of strained oxides.

Correlating interfacial octahedral rotations with magnetism in (LaMnO3+δ)N/(SrTiO3)N superlattices

Lattice distortion due to oxygen octahedral rotations have a significant role in mediating the magnetism in oxides, and recently attracts a lot of interests in the study of complex oxides interface. However, the direct experimental evidence for the interrelation between octahedral rotation and magnetism at interface is scarce. Here we demonstrate that interfacial octahedral rotation are closely linked to the strongly modified ferromagnetism in (LaMnO3+δ)N/(SrTiO3)N superlattices. The maximized ferromagnetic moment in the N=6 superlattice is accompanied by a metastable structure (space group Imcm) featuring minimal octahedral rotations (a(-)a(-)c(-), α~4.2°, γ~0.5°). Quenched ferromagnetism for N<4 superlattices is correlated to a substantially enhanced c axis octahedral rotation (a(-)a(-)c(-), α~3.8°, γ~8° for N=2). Monte-Carlo simulation based on double-exchange model qualitatively reproduces the experimental observation, confirming the correlation between octahedral rotation and magnetism. Our study demonstrates that engineering superlattices with controllable interfacial structures can be a feasible new route in realizing functional magnetic materials.

Oxygen octahedral distortions in LaMO3/SrTiO3 superlattices

In this work we study the interfaces between the Mott insulator LaMnO3 (LMO) and the band insulator SrTiO3 (STO) in epitaxially grown superlattices with different thickness ratios and different transport and magnetic behaviors. Using atomic resolution electron energy-loss spectral imaging, we analyze simultaneously the structural and chemical properties of these interfaces. We find changes in the oxygen octahedral tilts within the LaMnO3 layers when the thickness ratio between the manganite and the titanate layers is varied. Superlattices with thick LMO and ultrathin STO layers present unexpected octahedral tilts in the STO, along with a small amount of oxygen vacancies. On the other hand, thick STO layers exhibit undistorted octahedra while the LMO layers present reduced O octahedral distortions near the interfaces. These findings are discussed in view of the transport and magnetic differences found in previous studies.

Tuning the entanglement between orbital reconstruction and charge transfer at a film surface

The interplay between orbital, charge, spin, and lattice degrees of freedom is at the core of correlated oxides. This is extensively studied at the interface of heterostructures constituted of two-layer or multilayer oxide films. Here, we demonstrate the interactions between orbital reconstruction and charge transfer in the surface regime of ultrathin (La,Sr)MnO₃, which is a model system of correlated oxides. The interactions are manipulated in a quantitative manner by surface symmetry-breaking and epitaxial strain, both tensile and compressive. The established charge transfer, accompanied by the formation of oxygen vacancies, provides a conceptually novel vision for the long-term problem of manganites—the severe surface/interface magnetization and conductivity deterioration. The oxygen vacancies are then purposefully tuned by cooling oxygen pressure, markedly improving the performances of differently strained films. Our findings offer a broad opportunity to tailor and benefit from the entanglements between orbit, charge, spin, and lattice at the surface of oxide films.

Unconventional upright layer orientation and considerable enhancement of proton–electron conductivity in Dion–Jacobson perovskite thin films

Excimer-laser-assisted metal organic deposition is a straightforward process for growing uniaxially oriented Dion–Jacobson perovskite thin films.

Magnetic properties of strained La2/3Sr1/3MnO3 perovskites from first principles

The critical temperature T(C) of ferromagnetic La(x)Sr(1-x)MnO3 (LSMO) can be controlled by distorting the crystal structure, as was reported by Thiele et al (2007 Phys. Rev. B 75 054408). To confirm these findings theoretically, we investigate the electronic as well as the magnetic ground state properties of La2/3Sr1/3MnO3 as a function of tetragonal lattice distortions, using a multiple-scattering Green function method. Within this approach, we calculate exchange coupling constants as well as the phase transition temperature from first principles. Comparing our findings with those for La2/3Sr1/3CoO3 (LSCO), we find that the decrease of T(C) is much stronger in LSMO than in LSCO. Our findings can be explained by the electronic structures and are also in accordance with the experiment. The computed decrease of TC with distortion is smaller than observed experimentally, a result that corroborates the importance of phonon contributions.

Artificial construction of the layered Ruddlesden-Popper manganite La2Sr2Mn3O10 by reflection high energy electron diffraction monitored pulsed laser deposition

Pulsed laser deposition has been used to artificially construct the n = 3 Ruddlesden-Popper structure La(2)Sr(2)Mn(3)O(10) in epitaxial thin film form by sequentially layering La(1-x)Sr(x)MnO(3) and SrO unit cells aided by in situ reflection high energy electron diffraction monitoring. The interval deposition technique was used to promote two-dimensional SrO growth. X-ray diffraction and cross-sectional transmission electron microscopy indicated that the trilayer structure had been formed. A site ordering was found to differ from that expected thermodynamically, with the smaller Sr(2+) predominantly on the R site due to kinetic trapping of the deposited cation sequence. A dependence of the out-of-plane lattice parameter on growth pressure was interpreted as changing the oxygen content of the films. Magnetic and transport measurements on fully oxygenated films indicated a frustrated magnetic ground state characterized as a spin glass-like magnetic phase with the glass temperature T(g) ≈ 34 K. The magnetic frustration has a clear in-plane (ab) magnetic anisotropy, which is maintained up to temperatures of 150 K. Density functional theory calculations suggest competing antiferromagnetic and ferromagnetic long-range orders, which are proposed as the origin of the low-temperature glassy state.

Near-surface structural study of transition metal oxides to understand their electronic properties

The atomic arrangement in a solid contains a great amount of information, and observation of its structure is essential for understanding the electronic and magnetic properties of transition metal oxides at a microscopic level. Increasing interest in the surfaces and interfaces of oxide systems, which is partly driven by the anticipation of device applications, enhances the importance of structural studies of the near-surface region. We review various types of structural studies with x-ray scattering on the near-surface region of metal oxides-from thick films to surfaces-in order to clarify the structural effects on their electronic properties.

Fast photovoltaic effects tuned by vicinal interface microstructure in manganite-based all-perovskite-oxide heterojunctions

Interfacial microstructure tunable photovoltaic effects have been reported in heterojunctions of La(1-x)Ca(x)MnO(3) thin films and tilted or exact cut Nb-doped SrTiO(3) single crystal substrates under irradiation of UV pulsed laser. The photoresponse times of vicinal junctions and films were obviously faster than those of exact cut samples. The behaviors can be explained by the slope of the built-in electric field in the 10° tilted heterojunction and the interfacial terrace microstructure of La(1-x)Ca(x)MnO(3) films.

Structure and properties of functional oxide thin films: insights from electronic-structure calculations

The confluence of state-of-the-art electronic-structure computations and modern synthetic materials growth techniques is proving indispensable in the search for and discovery of new functionalities in oxide thin films and heterostructures. Here, we review the recent contributions of electronic-structure calculations to predicting, understanding, and discovering new materials physics in thin-film perovskite oxides. We show that such calculations can accurately predict both structure and properties in advance of film synthesis, thereby guiding the search for materials combinations with specific targeted functionalities. In addition, because they can isolate and decouple the effects of various parameters which unavoidably occur simultaneously in an experiment-such as epitaxial strain, interfacial chemistry and defect profiles-they are able to provide new fundamental knowledge about the underlying physics. We conclude by outlining the limitations of current computational techniques, as well as some important open questions that we hope will motivate further methodological developments in the field.

Quantitative analyses of oxidation states for cubic SrMnO(3) and orthorhombic SrMnO(2.5) with electron energy loss spectroscopy

The oxidation state of Mn in cubic SrMnO(3) and orthorhombic SrMnO(2.5) was investigated by electron energy loss (EEL) spectroscopy. Change in the oxidation state of Mn produced some spectral changes in the O-K edge as well as in the Mn-L(2,3) edge EEL spectra. This study demonstrated that the oxidation state of Mn and the amount of oxygen vacancies in cubic SrMnO(3) and orthorhombic SrMnO(2.5) could be quantified by analyzing the features of the O-K edge spectrum and the Mn L(3)∕L(2) ratio in the Mn-L(2,3) edge spectrum. Our quantitative analysis showed that the spectral changes in the Mn-L(2,3) edge were mainly caused by the oxidation state of Mn, whereas those in the O-K edge could be sensitive to both the oxidation state of Mn and to lattice distortions.

Optical properties of (SrMnO₃)n/(LaMnO₃)₂n superlattices: an insulator-to-metal transition observed in the absence of disorder

We measure the optical conductivity, σ1(ω), of (SrMnO3)n/(LaMnO3)2n superlattices (SL) for n = 1, 3, 5, and 8 and 10 < T < 400 K. Data show a T-dependent insulator to metal transition (IMT) for n ≤ 3, driven by the softening of a polaronic mid-infrared band. At n = 5 that softening is incomplete, while at the largest-period n = 8 compound the MIR band is independent of T and the SL remains insulating. One can thus first observe the IMT in a Manganite system in the absence of the disorder due to chemical doping. Unsuccessful reconstruction of the SL optical properties from those of the original bulk materials suggests that (SrMnO3)n/(LaMnO3)2n heterostructures give rise to a novel electronic state.