Breaking up is hard to do

Do antibody CDR loops change conformation upon binding?

Antibodies have increasingly been developed as drugs with over 100 now licensed in the US or EU. During development, it is often necessary to increase or reduce the affinity of an antibody and rational attempts to do so rely on having a structure of the antibody-antigen complex often obtained by modeling. The antigen-binding site consists primarily of six loops known as complementarity-determining regions (CDRs), and an open question has been whether these loops change their conformation when they bind to an antigen. Existing surveys of antibody-antigen complex structures have only examined CDR conformational change in case studies or small-scale surveys. With an increasing number of antibodies where both free and complexed structures have been deposited in the Protein Data Bank, a large-scale survey of CDR conformational change during binding is now possible. To this end, we built a dataset, AbAgDb, that currently includes 177 antibodies with high-quality CDRs, each of which has at least one bound and one unbound structure. We analyzed the conformational change of the Cα backbone of each CDR upon binding and found that, in most cases, the CDRs (other than CDR-H3) show minimal movement, while 70.6% and 87% of CDR-H3s showed global Cα RMSD ≤ 1.0Å and ≤ 2.0Å, respectively. We also compared bound CDR conformations with the conformational space of unbound CDRs and found most of the bound conformations are included in the unbound conformational space. In future, our results will contribute to developing insights into antibodies and new methods for modeling and docking.

Identifying the protonation site and the scope of non-proline cis-peptide bond conformations: a first-principles study on protonated oligopeptides

The existence of non-proline cis-peptide bond conformations of protonated triglycine proposed by us has been verified through a recent IR-IR double resonance experiment. However, the scope of such unique structures in protonated oligopeptides and whether protonation at amide oxygen is more stable than that at traditional amino nitrogen remain unsolved. In this study, the most stable conformers of a series of protonated oligopeptides were fully searched. Our findings reveal that the special cis-peptide bond structure appears with high energies for diglycine and is energetically less favored for tetra- and pentapeptides, while it acts as the global minimum only for tripeptides. To explore the formation mechanism of the cis-peptide bond, electrostatic potential analysis, and intramolecular interactions were analyzed. Advanced theoretical calculations confirmed that amino nitrogen is still preferred as the protonated site in most cases except glycylalanylglycine(GAG). The energy difference between the two protonated isomers of GAG is only 0.03 kcal mol^-1, indicating that the tripeptide is most likely to be protonated on the amide oxygen first. We also conducted chemical (infrared (IR)) and electronic (X-ray photoelectron spectra (XPS) and near-edge X-ray absorption fine structure spectra (NEXAFS)) structure calculations of these peptides to identify their notable differences unambiguously. This study thus provides valuable information for exploring the scope of cis-peptide bond conformation and the competition between two different protonated ways.

Peptide bond conformation in peptides and proteins probed by dipolar coupling-chemical shift tensor correlation solid-state NMR

Multidimensional magic-angle spinning solid-state NMR experiments are described that permit cis and trans peptide bonds in uniformly 13C,15N-labeled peptides and proteins to be unambiguously distinguished in residue-specific manner by determining the relative orientations of the amide 13C' CSA and 1H-15N dipolar coupling tensors. The experiments are demonstrated for model peptides glycylglycine and 2,5-diketopiperazine containing trans and cis peptide bonds, respectively. Subsequently, the measurements are extended to two representative proteins that contain exclusively trans peptide bonds, microcrystalline B3 immunoglobulin domain of protein G and Y145Stop human prion protein amyloid fibrils, to illustrate their applicability to a wide range of protein systems.

Molecular Dynamics Information Improves cis-Peptide-Based Function Annotation of Proteins

cis-Peptide bonds, whose occurrence in proteins is rare but evolutionarily conserved, are implicated to play an important role in protein function. This has led to their previous use in a homology-independent, fragment-match-based protein function annotation method. However, proteins are not static molecules; dynamics is integral to their activity. This is nicely epitomized by the geometric isomerization of cis-peptide to trans form for molecular activity. Hence we have incorporated both static (cis-peptide) and dynamics information to improve the prediction of protein molecular function. Our results show that cis-peptide information alone cannot detect functional matches in cases where cis-trans isomerization exists but 3D coordinates have been obtained for only the trans isomer or when the cis-peptide bond is incorrectly assigned as trans. On the contrary, use of dynamics information alone includes false-positive matches for cases where fragments with similar secondary structure show similar dynamics, but the proteins do not share a common function. Combining the two methods reduces errors while detecting the true matches, thereby enhancing the utility of our method in function annotation. A combined approach, therefore, opens up new avenues of improving existing automated function annotation methodologies.

Identification of the protonation site of gaseous triglycine: the cis-peptide bond conformation as the global minimum

Extensive ab initio investigations have been performed to characterize stable conformers of protonated triglycine (GGGH) in the gas phase.

Detection of trans-cis flips and peptide-plane flips in protein structures

A coordinate-based method is presented to detect peptide bonds that need correction either by a peptide-plane flip or by a trans-cis inversion of the peptide bond. When applied to the whole Protein Data Bank, the method predicts 4617 trans-cis flips and many thousands of hitherto unknown peptide-plane flips. A few examples are highlighted for which a correction of the peptide-plane geometry leads to a correction of the understanding of the structure-function relation. All data, including 1088 manually validated cases, are freely available and the method is available from a web server, a web-service interface and through WHAT_CHECK.

Identifying functionally important cis-peptide containing segments in proteins and their utility in molecular function annotation

Cis-peptide embedded segments are rare in proteins but often highlight their important role in molecular function when they do occur. The high evolutionary conservation of these segments illustrates this observation almost universally, although no attempt has been made to systematically use this information for the purpose of function annotation. In the present study, we demonstrate how geometric clustering and level-specific Gene Ontology molecular-function terms (also known as annotations) can be used in a statistically significant manner to identify cis-embedded segments in a protein linked to its molecular function. The present study identifies novel cis-peptide fragments, which are subsequently used for fragment-based function annotation. Annotation recall benchmarks interpreted using the receiver-operator characteristic plot returned an area-under-curve > 0.9, corroborating the utility of the annotation method. In addition, we identified cis-peptide fragments occurring in conjunction with functionally important trans-peptide fragments, providing additional insights into molecular function. We further illustrate the applicability of our method in function annotation where homology-based annotation transfer is not possible. The findings of the present study add to the repertoire of function annotation approaches and also facilitate engineering, design and allied studies around the cis-peptide neighborhood of proteins.

Cis-trans peptide variations in structurally similar proteins

The presence of energetically less favourable cis peptides in protein structures has been observed to be strongly associated with its structural integrity and function. Inter-conversion between the cis and trans conformations also has an important role in the folding process. In this study, we analyse the extent of conservation of cis peptides among similar folds. We look at both the amino acid preferences and local structural changes associated with such variations. Nearly 34% of the Xaa-Proline cis bonds are not conserved in structural relatives; Proline also has a high tendency to get replaced by another amino acid in the trans conformer. At both positions bounding the peptide bond, Glycine has a higher tendency to lose the cis conformation. The cis conformation of more than 30% of β turns of type VIb and IV are not found to be conserved in similar structures. A different view using Protein Block-based description of backbone conformation, suggests that many of the local conformational changes are highly different from the general local structural variations observed among structurally similar proteins. Changes between cis and trans conformations are found to be associated with the evolution of new functions facilitated by local structural changes. This is most frequent in enzymes where new catalytic activity emerges with local changes in the active site. Cis-trans changes are also seen to facilitate inter-domain and inter-protein interactions. As in the case of folding, cis-trans conversions have been used as an important driving factor in evolution.

Extraction of consensus protein patterns in regions containing non-proline cis peptide bonds and their functional assessment

Background

In peptides and proteins, only a small percentile of peptide bonds adopts the cis configuration. Especially in the case of amide peptide bonds, the amount of cis conformations is quite limited thus hampering systematic studies, until recently. However, lately the emerging population of databases with more 3D structures of proteins has produced a considerable number of sequences containing non-proline cis formations (cis-nonPro).

Results

In our work, we extract regular expression-type patterns that are descriptive of regions surrounding the cis-nonPro formations. For this purpose, three types of pattern discovery are performed: i) exact pattern discovery, ii) pattern discovery using a chemical equivalency set, and iii) pattern discovery using a structural equivalency set. Afterwards, using each pattern as predicate, we search the Eukaryotic Linear Motif (ELM) resource to identify potential functional implications of regions with cis-nonPro peptide bonds. The patterns extracted from each type of pattern discovery are further employed, in order to formulate a pattern-based classifier, which is used to discriminate between cis-nonPro and trans-nonPro formations.

Conclusions

In terms of functional implications, we observe a significant association of cis-nonPro peptide bonds towards ligand/binding functionalities. As for the pattern-based classification scheme, the highest results were obtained using the structural equivalency set, which yielded 70% accuracy, 77% sensitivity and 63% specificity.

Prediction of cis/trans isomerization using feature selection and support vector machines

In protein structures the peptide bond is found to be in trans conformation in the majority of the cases. Only a small fraction of peptide bonds in proteins is reported to be in cis conformation. Most of these instances (>90%) occur when the peptide bond is an imide (X-Pro) rather than an amide bond (X-nonPro). Due to the implication of cis/trans isomerization in many biologically significant processes, the accurate prediction of the peptide bond conformation is of high interest. In this study, we evaluate the effect of a wide range of features, towards the reliable prediction of both proline and non-proline cis/trans isomerization. We use evolutionary profiles, secondary structure information, real-valued solvent accessibility predictions for each amino acid and the physicochemical properties of the surrounding residues. We also explore the predictive impact of a modified feature vector, which consists of condensed position-specific scoring matrices (PSSMX), secondary structure and solvent accessibility. The best discriminating ability is achieved using the first feature vector combined with a wrapper feature selection algorithm and a support vector machine (SVM). The proposed method results in 70% accuracy, 75% sensitivity and 71% positive predictive value (PPV) in the prediction of the peptide bond conformation between any two amino acids. The output of the feature selection stage is investigated in order to identify discriminatory features as well as the contribution of each neighboring residue in the formation of the peptide bond, thus, advancing our knowledge towards cis/trans isomerization.

A three-dimensional model of the human transglutaminase 1: insights into the understanding of lamellar ichthyosis

The stratum corneum, the outer layer of the epidermis, serves as a protective barrier to isolate the skin from the external environment. Keratinocyte transglutaminase 1 (TGase 1) catalyzes amide crosslinking between glutamine and lysine residues on precursor proteins forming the impermeable layers of the epidermal cell envelopes (CE), the highly insoluble membranous structures of the stratum corneum. Patients with the autosomal recessive skin disorder lamellar ichthyosis (LI) appear to have deficient cross-linking of the cell envelope due to mutations identified in TGase 1, linking this enzyme to LI. In the absence of a crystal structure, molecular modeling was used to generate the structure of TGase 1. We have mapped the known mutations of TGase 1 from our survey obtained from a search of PubMed and successfully predicted the impact of these mutations on LI. Furthermore, we have identified Ca(2+) binding sites and propose that Ca(2+) induces a cis to trans isomerization in residues near the active site as part of the enzyme transamidation activation. Docking experiments suggest that substrate binding subsequently induces the reverse cis to trans isomerization, which may be a significant part of the catalytic process. These results give an interpretation at the molecular level of previously reported mutations and lead to further insights into the structural model of TGase 1, providing a new basis for understanding LI.

A novel method of analyzing proline synonymous codons in E. coli

Proline is a special imino acid in protein and the isomerization of the prolyl peptide bond has notable biological significance and influences the final structure of protein greatly, so the correlation between proline synonymous codon usage and local amino acid, the correlation between proline synonymous codon usage and the isomerization of the prolyl peptide bond were both investigated in the Escherichia coli genome by using a novel method based on information theory. The results show that in peptide chain, the residue at the first position C-terminal influences the usage of proline synonymous codon greatly and proline synonymous codons contain some factors influencing the isomerization of the prolyl peptide bond.

Crystal structure of the autocatalytic initiator of glycogen biosynthesis, glycogenin

Glycogen is an important storage reserve of glucose present in many organisms, from bacteria to humans. Its biosynthesis is initiated by a specialized protein, glycogenin, which has the unusual property of transferring glucose from UDP-glucose to form an oligosaccharide covalently attached to itself at Tyr194. Glycogen synthase and the branching enzyme complete the synthesis of the polysaccharide. The structure of glycogenin was solved in two different crystal forms. Tetragonal crystals contained a pentamer of dimers in the asymmetric unit arranged in an improper non-crystallographic 10-fold relationship, and orthorhombic crystals contained a monomer in the asymmetric unit that is arranged about a 2-fold crystallographic axis to form a dimer. The structure was first solved to 3.4 A using the tetragonal crystal form and a three-wavelength Se-Met multi-wavelength anomalous diffraction (MAD) experiment. Subsequently, an apo-enzyme structure and a complex between glycogenin and UDP-glucose/Mn2+ were solved by molecular replacement to 1.9 A using the orthorhombic crystal form. Glycogenin contains a conserved DxD motif and an N-terminal beta-alpha-beta Rossmann-like fold that are common to the nucleotide-binding domains of most glycosyltransferases. Although sequence identity amongst glycosyltransferases is minimal, the overall folds are similar. In all of these enzymes, the DxD motif is essential for coordination of the catalytic divalent cation, most commonly Mn2+. We propose a mechanism in which the Mn2+ that associates with the UDP-glucose molecule functions as a Lewis acid to stabilize the leaving group UDP and to facilitate the transfer of the glucose moiety to an intermediate nucleophilic acceptor in the enzyme active site, most likely Asp162. Following transient transfer to Asp162, the glucose moiety is then delivered to the final acceptor, either directly to Tyr194 or to glucose residues already attached to Tyr194. The positioning of the bound UDP-glucose far from Tyr194 in the glycogenin structure raises questions as to the mechanism for the attachment of the first glucose residues. Possibly the initial glucosylation is via inter-dimeric catalysis with an intra-molecular mechanism employed later in oligosaccharide synthesis.

Local structural changes caused by peptidyl-prolyl cis/trans isomerization in the native state of proteins

Peptidyl-prolyl cis/trans isomerization, observed in the native state of an increasing number of proteins, is of considerable biological significance. The first evidence for an asymmetric transmission along the polypeptide chain of the structural effects of prolyl isomerization is now derived from the statistics of the C(alpha)/C(alpha)-atom distance distributions in the crystal structures of 848 non-homologous proteins. More detailed information on how isomerization affects segments adjacent to proline is obtained from crystal structures of proteins, that are more than 95% homologous, and that exhibit two different states of isomerization at a particular prolyl bond. The resulting 64 cases, which represent 3.8% of the database used, form pairs of coordinates which were analyzed for the existence of isomer-specific intramolecular nonbonded C(alpha)/C(alpha)-atom distances around the critical proline, and for the positional preferences for particular amino acids in the isomeric sequence segment. The probability that a native protein exhibits both prolyl isomers in the crystalline state increases in particular with a Pro at the third position N-terminal to the isomeric bond (-3 position), and with Ser, Gly and Asp at the position preceding the isomeric bond (-1 position). Structural alignment of matched pairs of isomeric proteins generates three classes with respect to position-specific distribution of C(alpha)-atom displacements around an isomeric proline imide bond. In the majority of cases the distribution of these intermolecular isomer-specific C(alpha)-atom distances shows a symmetric behavior for the N-terminal and C-terminal segment flanking the proline residue, and the magnitude did not exceed 1.3+/-0.6 A including the C(alpha) atoms in proximity to the prolyl bond. However, in the remaining 12 protein pairs the structural changes are unidirectional relative to the isomerizing bond whereby the magnitude of the isomer-specific effect exceeds 3.0+/-2.0 A even at positions remote to proline. Interestingly, the magnitude of the intramolecular isomer-specific C(alpha) atom displacements reveals a lever-arm amplification of the isomerization-mediated structural changes in a protein backbone. The observed backbone effects provide a structural basis for isomer-specific reactions of proline-containing polypeptides, and thus may play a role in biological recognition and regulation.

Residues near the N-terminus of protein B control autocatalytic proteolysis and the activity of soluble methane mono-oxygenase

Soluble methane mono-oxygenase (sMMO) of Methylococcus capsulatus (Bath) catalyses the O2-dependent and NAD(P)H-dependent oxygenation of methane and numerous other substrates. During purification, the sMMO enzyme complex, which comprises three components and has a molecular mass in excess of 300 kDa, becomes inactivated because of cleavage of just 12 amino acids from the N-terminus of protein B, which is the smallest component of sMMO and the only one without prosthetic groups. Here we have shown that cleavage of protein B, to form the inactive truncated protein B', continued to occur when intact protein B was repeatedly separated from protein B' and all detectable contaminants, giving compelling evidence that the protein was cleaved autocatalytically. The rate of autocatalytic cleavage decreased when the residues flanking the cleavage site were mutated, but the position of cleavage was unaltered. Analysis of a series of incremental truncates showed that residue(s) essential for the activity of sMMO, and important in determining the stability of protein B, lay in the region Ser4-Tyr7. Protein B was shown to possess intrinsic nucleophilic activity, which we propose initiates the cleavage reaction via a novel mechanism. Proteins B and B' were detected in approximately equal amounts in the cell, showing that truncation of protein B is biologically relevant. Increasing the growth-medium copper concentration, which inactivates sMMO, did not alter the extent of in vivo cleavage, therefore the conditions under which cleavage of protein B may fulfil its proposed role as a regulator of sMMO remain to be identified.

An in vivo screening system against protein splicing useful for the isolation of non-splicing mutants or inhibitors of the RecA intein of Mycobacterium tuberculosis

Protein splicing involves the self-catalyzed excision of an intervening sequence, the intein, from a precursor protein, with the concomitant ligation of the flanking extein sequences to yield a new polypeptide. The ability of inteins to promote protein splicing even when inserted into a foreign context has facilitated the study of the modulation of protein splicing. In this paper, we describe an in vivo screening system for the isolation of mutations or inhibitors that interfere with protein splicing mediated by the RecA intein of Mycobacterium tuberculosis. It involves the activation of the cytotoxic CcdB protein by protein splicing, such that host cells survive in the presence of inducer only when protein splicing is blocked. The coding sequence for the RecA intein was inserted in-frame into the polylinker region of an inducible lacZ alpha-ccdB fusion vector, leading to inactivation of the CcdB toxin unless the intein is excised by protein splicing. Depending on the objective of the screening procedure, its stringency can be modified by altering the level of expression of the intein-CcdB fusion protein. To induce large amounts of CcdB fusion proteins, the fusion protein is expressed from a high-copy-number plasmid. Such a screening system detects even low levels of protein splicing and we have used it to show that protein splicing of the RecA intein is compatible with any amino acid in the extein position adjacent to the N-terminal splice junction. In order to search for protein splicing inhibitors, which may attenuate protein splicing by less than an order of magnitude, we have also constructed a low-copy-number intein-CcdB plasmid so that the host cells can survive when splicing of the expressed CcdB fusion protein is only moderately suppressed. We anticipate that the CcdB-based in vivo screening system will find uses in the analysis of structural and mechanistic aspects of protein splicing.

The interrelationships of side-chain and main-chain conformations in proteins

The accurate determination of a large number of protein structures by X-ray crystallography makes it possible to conduct a reliable statistical analysis of the distribution of the main-chain and side-chain conformational angles, how these are dependent on residue type, adjacent residue in the sequence, secondary structure, residue-residue interactions and location at the polypeptide chain termini. The interrelationship between the main-chain (phi, psi) and side-chain (chi 1) torsion angles leads to a classification of amino acid residues that simplify the folding alphabet considerably and can be a guide to the design of new proteins or mutational studies. Analyses of residues occurring with disallowed main-chain conformation or with multiple conformations shed some light on why some residues are less favoured in thermophiles.

NMR solution structure of hPar14 reveals similarity to the peptidyl prolyl cis/trans isomerase domain of the mitotic regulator hPin1 but indicates a different functionality of the protein

The 131-amino acid residue parvulin-like human peptidyl-prolyl cis/trans isomerase (PPIase) hPar14 was shown to exhibit sequence similarity to the regulator enzyme for cell cycle transitions human hPin1, but specificity for catalyzing pSer(Thr)-Pro cis/trans isomerizations was lacking. To determine the solution structure of hPar14 the (1)H, (13)C, and (15)N chemical shifts of this protein have been assigned using heteronuclear two and three-dimensional NMR experiments on unlabeled and uniformly (15)N/(13)C-labeled recombinant protein isolated from Escherichia coli cells that overexpress the protein. The chemical shift assignments were used to interpret the NOE data, which resulted in a total of 1042 NOE restraints. The NOE restraints were used along with 71 dihedral angle restraints and 38 hydrogen bonding restraints to produce 50 low-energy structures. The hPar14 folds into a betaalpha(3)betaalphabeta(2) structure, and contains an unstructured 35-amino acid basic tail N-terminal to the catalytic core that replaces the WW domain of hPin1 homologs. The three-dimensional structures of hPar14 and the PPIase domain of human hPin1 reveal a high degree of conservation. The root-mean-square deviations of the mean atomic coordinates of the heavy atoms of the backbone between residues 38 to 45, 50 to 58, 64 to 70, 81 to 86, 115 to 119 and 122 to 128 of hPar14 were 0.81(+/-0.07) A. The hPar14 model structure provides insight into how this class of PPIases may select preferential secondary catalytic sites, and also allows identification of a putative DNA-binding motif in parvulin-like PPIases.

Evidence that the substrate backbone conformation is critical to phosphorylation by p42 MAP kinase

The effect of prolyl bond isomers on the substrate recognition capabilities of various endoproteases may be investigated in a reaction where both cis/trans isomers co-exist. Here we address the question of whether enzyme reactions at the side chain of an amino acid preceding proline proceed through an isomer specific pathway. The proline-directed p42 mitogen-activated protein kinase (ERK2) was used to phosphorylate the serine side chain in Pro-Arg-Ser-Pro-Phe-4-nitroanilide under conditions where different amounts of cis prolyl isomer of the substrate were present. Initial phosphorylation rates were calculated ranging between zero at 100% cis isomer and around 60 pM/min at the equilibrium content of 83.5% trans isomer. In the presence of the peptidyl-prolyl cis/trans isomerase human hFKBP12 (500 nM), cis/trans isomerization proceeds rapidly, permitting the maximal phosphorylation rate to be observed in the dead time of the experiment. Results show that correct signature sequences are not sufficient to render potential substrates reactive to proline-directed enzymatic phosphorylations, but that the conformational state of the peptide bond following serine (threonine) is a critical determinant. Therefore, catalysis by peptidyl-prolyl cis/trans isomerases may add a new level of control to intracellular protein phosphorylations.

Reactivity of the cysteine residues in the protein splicing active center of the Mycobacterium tuberculosis RecA intein

Protein splicing involves the self-catalyzed excision of an intervening polypeptide segment, an intein, from a precursor protein. The first two steps in the protein splicing process lead to the formation of ester intermediates through nucleophilic attacks by the side chains of cysteine, serine, or threonine residues adjacent to the splice junctions. Since both nucleophilic residues in the Mycobacterium tuberculosis RecA intein are cysteine, their reactivities could be compared by sulfhydryl group titration. This was accomplished by using fusion proteins containing a truncated RecA intein modified by mutation to prevent protein splicing, in which the cysteines at the splice junctions were the only sulfhydryl groups. The ability to undergo hydroxylamine-induced cleavage at the upstream splice junction showed that the modified intein was not impaired in the ability to form ester intermediates. Sulfhydryl titration with iodoacetamide, monitored by quantitating the residual thiols after reaction with a maleimide derivative of biotin, revealed a striking difference in the apparent pK(a) values of the cysteines at the two splice junctions. The apparent pK(a) of the cysteine at the upstream splice junction, which initiates the N-S acyl rearrangement leading to the linear ester intermediate, was approximately 8.2, whereas that of the cysteine residue at the downstream splice junction, which initiates the transesterification reaction converting the linear ester to the branched ester intermediate, was about 5.8. This suggests that the transesterification step is facilitated by an unusually low pK(a) of the attacking thiol group. Comparison of the rates of cleavage of the linear ester intermediates derived from the M. tuberculosis RecA and the Saccharomyces cerevisiae VMA inteins by dithiothreitol and hydroxylamine revealed that the former reacted relatively more slowly with dithiothreitol, suggesting that the RecA intein has diverged in the course of evolution to react preferentially with thiolate anions and thus lacks the basic groups that may facilitate nucleophilic attack by thiols in other inteins.

Cis peptide bonds in proteins: residues involved, their conformations, interactions and locations

An analysis of a non-redundant set of protein structures from the Brookhaven Protein Data Bank has been carried out to find out the residue preference, local conformation, hydrogen bonding and other stabilizing interactions involving cis peptide bonds. This has led to a reclassification of turns mediated by cis peptides, and their average geometrical parameters have been evaluated. The interdependence of the side and main-chain torsion angles of proline rings provided an explanation why such rings in cis peptides are found to have the DOWN puckering. A comparison of cis peptides containing proline and non-proline residues show differences in conformation, location in the secondary structure and in relation to the centre of the molecule, and relative accessibilities of residues. Relevance of the results in mutation studies and the cis-trans isomerization during protein folding is discussed.

A method to detect nonproline cis peptide bonds in proteins

Based on the geometrical parameters around seventeen incorrectly assigned trans conformations of peptide bonds in protein structures and their correct cis counterparts, we have devised an algorithm that is capable of detecting these sites. The algorithm was optimized to reliably find all of the seventeen test cases. It can be used to quickly scan an atomic coordinate file or the complete Brookhaven Protein Data Base for more likely candidates for non-Pro cis peptide bonds. Also, it can be of help to guide the crystallographer in intermediate stages of structure determination towards suspect areas.

A genetic system yields self-cleaving inteins for bioseparations

A self-cleaving element for use in bioseparations has been derived from a naturally occurring, 43 kDa protein splicing element (intein) through a combination of protein engineering and random mutagenesis. A mini-intein (18 kDa) previously engineered for reduced size had compromised activity and was therefore subjected to random mutagenesis and genetic selection. In one selection a mini-intein was isolated with restored splicing activity, while in another, a mutant was isolated with enhanced, pH-sensitive C-terminal cleavage activity. The enhanced-cleavage mutant has utility in affinity fusion-based protein purification. These mutants also provide new insights into the structural and functional roles of some conserved residues in protein splicing.

Non-proline cis peptide bonds in proteins

In a non-redundant set of 571 proteins from the Brookhaven Protein Data Base, a total of 43 non-proline cis peptide bonds were identified. Average geometrical parameters of the well-defined cis peptide bonds in proteins determined at high resolution show that some parameters, most notably the bond angle at the amide bond nitrogen, deviate significantly from the corresponding one in the trans conformation. Since the same feature was observed in cis amide bonds in small molecule structures found in the Cambridge Structural Data Base, a new set of parameters for the refinement of protein structures containing non-Pro cis peptide bonds is proposed.A striking preference was observed for main-chain dihedral angles of the residues involved in cis peptide bonds. All residues N-terminal and most residues C-terminal to a non-Pro cis peptide bond (except Gly) are located in the beta-region of a phi/psi plot. Also, all of the few C-terminal residues (except Gly) located in the alpha-region of the phi/psi plot constitute the start of an alpha-helix in the respective structure. In the majority of cases, an intimate side-chain/side-chain interaction was observed between the flanking residues, often involving aromatic side-chains. Interestingly, most of the cases found occur in functionally important regions such as close to the active site of proteins. It is intriguing that many of the proteins containing non-proline cis peptide bonds are carbohydrate-binding or processing proteins. The occurrence of these unusual peptide bonds is significantly more frequent in structures determined at high resolution than in structures determined at medium and low resolution, suggesting that these bonds may be more abundant than previously thought. On the basis of our experience with the structure determination of coagulation factor XIII, we developed an algorithm for the identification of possibly overlooked cis peptide bonds that exploits the deviations of geometrical parameters from ideality. A few likely candidates based on our algorithm have been identified and are discussed.