Magnetic field sensors using arrays of electrospun magnetoelectric Janus nanowires

Ferroelectric and Non-Linear Optical Nanofibers by Electrospinning: From Inorganics to Molecular Crystals

In recent decades, substantial progress has been made in embedding molecules, nanocrystals, and nanograins into nanofibers, resulting in a new class of hybrid functional materials with exceptional physical properties. Among these materials, functional nanofibers exhibiting ferroelectric, piezoelectric, pyroelectric, multiferroic, and nonlinear optical characteristics have attracted considerable attention and undergone substantial improvements. This review critically examines these developments, focusing on strategies for incorporating diverse compounds into nanofibers and their impact on enhancing their physical properties, particularly ferroelectric behavior and nonlinear optical conversion. These developments have transformative potential across electronics, photonics, biomaterials, and energy harvesting. By synthesizing recent advancements in the design and application of nanofiber-embedded materials, this review seeks to highlight their potential impact on scientific research, technological innovation, and the development of next-generation devices.

Tunable synthesis of magnetoelectric CoFe2O4-BaTiO3 core-shell nanowires

A template-assisted synthesis approach was employed to tune the structure and properties of CoFe2O4-BaTiO3 core-shell magnetoelectric nanowires. By adjusting the composition of the nanowires, we achieved control over the magnetic anisotropy in the CoFe2O4 core phase. This work highlights the potential for enhanced magnetic anisotropy to improve magnetoelectric performance.

Multifunctional polyimide-based femtosecond laser micro/nanostructured films with triple Janus properties

Flexible multifunctional composite films in which opposing surfaces have two or more distinct physical properties are highly applicable for wearable electronic devices, electrical power systems and biomedical engineering. However, fabrication of such "Janus" films can be time consuming, complex or economically not feasible. In this work, Janus polyimide (PI) films were prepared by femtosecond laser direct writing technology, which generated a honeycomb porous structure (HPS) on one side and a lawn-like structure (LLS) on the other. Deposition of silver nanowires (AGNWs) by drop coating on the LLS side (AGNWs@LLS) resulted in a film in which each face possessed highly distinct triple properties. The HPS side was superhydrophobic with a water contact angle (WCA) of ∼153.3° and electrically non-conductive, while the AGNWs@LLS side was superhydrophilic (WCA ∼7.8°) and highly conductive (∼3.8 Ω). Moreover, the AGNWs@LLS face showed ultra-low thermal radiation performance, almost reaching saturation. On a heating table at ∼100 °C, the temperature of the AGNWs@LLS side remained at ∼44.5 °C, while the HPS side exhibited a temperature of ∼93.9 °C. This "triple Janus film" and lasing techniques developed might be useful for designing new materials for the integration and miniaturization of multifunctional electronic equipment.

Self-assembly, alignment, and patterning of metal nanowires

Armed with the merits of one-dimensional nanostructures (flexibility, high aspect ratio, and anisotropy) and metals (high conductivity, plasmonic properties, and catalytic activity), metal nanowires (MNWs) have stood out as a new class of nanomaterials in the last two decades. They are envisaged to expedite significantly and even revolutionize a broad spectrum of applications related to display, sensing, energy, plasmonics, photonics, and catalysis. Compared with disordered MNWs, well-organized MNWs would not only enhance the intrinsic physical and chemical properties, but also create new functions and sophisticated architectures of optoelectronic devices. This paper presents a comprehensive review of assembly strategies of MNWs, including self-assembly for specific structures, alignment for anisotropic constructions, and patterning for precise configurations. The technical processes, underlying mechanisms, performance indicators, and representative applications of these strategies are described and discussed to inspire further innovation in assembly techniques and guide the fabrication of optoelectrical devices. Finally, a perspective on the critical challenges and future opportunities of MNW assembly is provided.

Overcoming the rise in local deposit resistance during electrophoretic deposition via suspension replenishing

Nanomaterials have unique properties, functionalities, and excellent performance, and as a result have gained significant interest across disciplines and industries. However, currently, there is a lack of techniques that can assemble as-synthesized nanomaterials in a scalable manner. Electrophoretic deposition (EPD) is a promising method for the scalable assembly of colloidally stable nanomaterials into thick films and arrays. In EPD, an electric field is used to assemble charged colloidal particles onto an oppositely charged substrate. However, in constant voltage EPD the deposition rate decreases with increasing deposition time, which has been attributed in part to the fact that the electric field in the suspension decreases with time. This decreasing electric field has been attributed to two probable causes, (i) increased resistance of the particle film and/or (ii) the growth of an ion-depletion region at the substrate. Here, to increase EPD yield and scalability we sought to distinguish between these two effects and found that the growth of the ion-depletion region plays the most significant role in the increase of the deposit resistance. Here, we also demonstrate a method to maintain constant deposit resistance in EPD by periodic replenishing of suspension, thereby improving EPD’s scalability.

In silico assessment of electrophysiological neuronal recordings mediated by magnetoelectric nanoparticles

Magnetoelectric materials hold untapped potential to revolutionize biomedical technologies. Sensing of biophysical processes in the brain is a particularly attractive application, with the prospect of using magnetoelectric nanoparticles (MENPs) as injectable agents for rapid brain-wide modulation and recording. Recent studies have demonstrated wireless brain stimulation in vivo using MENPs synthesized from cobalt ferrite (CFO) cores coated with piezoelectric barium titanate (BTO) shells. CFO-BTO core-shell MENPs have a relatively high magnetoelectric coefficient and have been proposed for direct magnetic particle imaging (MPI) of brain electrophysiology. However, the feasibility of acquiring such readouts has not been demonstrated or methodically quantified. Here we present the results of implementing a strain-based finite element magnetoelectric model of CFO-BTO core-shell MENPs and apply the model to quantify magnetization in response to neural electric fields. We use the model to determine optimal MENPs-mediated electrophysiological readouts both at the single neuron level and for MENPs diffusing in bulk neural tissue for in vivo scenarios. Our results lay the groundwork for MENP recording of electrophysiological signals and provide a broad analytical infrastructure to validate MENPs for biomedical applications.

Template-Assisted Iron Nanowire Formation at Different Electrolyte Temperatures

We studied the morphology, structure, and magnetic properties of Fe nanowires that were electrodeposited as a function of the electrolyte temperature. The nucleation mechanism followed instantaneous growth. At low temperatures, we observed an increase of the total charge reduced into the templates, thus suggesting a significant increase in the degree of pore filling. Scanning electron microscopy images revealed smooth nanowires without any characteristic features that would differentiate their morphology as a function of the electrolyte temperature. X-ray photoelectron spectroscopy studies indicated the presence of a polycarbonate coating that covered the nanowires and protected them against oxidation. The X-ray diffraction measurements showed peaks coming from the polycrystalline Fe bcc structure without any traces of the oxide phases. The crystallite size decreased with an increasing electrolyte temperature. The transmission electron microscopy measurements proved the fine-crystalline structure and revealed elongated crystallite shapes with a columnar arrangement along the nanowire. Mössbauer studies indicated a deviation in the magnetization vector from the normal direction, which agrees with the SQUID measurements. An increase in the electrolyte temperature caused a rise in the out of the membrane plane coercivity. The studies showed the oxidation resistance of the Fe nanowires deposited at elevated electrolyte temperatures.

Piezoelectric and Magnetoelectric Scaffolds for Tissue Regeneration and Biomedicine: A Review

Electric fields are ubiquitous throughout the body, playing important role in a multitude of biological processes including osteo-regeneration, cell signaling, nerve regeneration, cardiac function, and DNA replication. An increased understanding of the role of electric fields in the body has led to the development of devices for biomedical applications that incorporate electromagnetic fields as an intrinsically novel functionality (e.g., bioactuators, biosensors, cardiac/neural electrodes, and tissues scaffolds). However, in the majority of the aforementioned devices, an implanted power supply is necessary for operation, and therefore requires highly invasive procedures. Thus, the ability to apply electric fields in a minimally invasive manner to remote areas of the body remains a critical and unmet need. Here, we report on the potential of magnetoelectric (ME)-based composites to overcome this challenge. ME materials are capable of producing localized electric fields in response to an applied magnetic field, which the body is permeable to. Yet, the use of ME materials for biomedical applications is just beginning to be explored. Here, we present on the potential of ME materials to be utilized in biomedical applications. This will be presented alongside current state-of-the-art for in vitro and in vivo electrical stimulation of cells and tissues. We will discuss key findings in the field, while also identifying challenges, such as the synthesis and characterization of biocompatible ME materials, challenges in experimental design, and opportunities for future research that would lead to the increased development of ME biomaterials and their applications.

Synthesis and thermal reaction of stainless steel nanowires

Due to the perfection of microelectronics fabrication, silicon is presently the preferred base material in the design of micromechanical devices. By contrast, steels are the dominating construction materials in macroscopic engineering. So, it is appealing to explore the potential of stainless steel nano objects. To this aim, we developed an electrochemical method for and investigated the fabrication of FeCr(C) nanowires and study their thermal reaction to design the microstructure. Wires, 50 to 150 nm in diameter, are produced by template-assisted electro-deposition. Under thermal annealing, they develop first a core-shell structure of an Fe-rich core and a dense Cr-rich carbide shell. The shell thickness is well controllable via the initial composition of the wires. In a later, second reaction stage, wires with rather thin shells (about 8 nm thickness) demonstrate a 'stacking inversion' that finally leads in a self-driven reaction to the formation of hollow carbide tubes decorated with iron rich clusters on their outer surface.

Ultrasensitive Detection of Volatile Organic Compounds by a Freestanding Aligned Ag/CdSe-CdS/PMMA Texture with Double-Side UV-Ozone Treatment

Volatile organic compounds (VOCs) are organic chemicals having a high vapor pressure at room temperature. Chronic exposure to VOC vapor can be potentially dangerous to human health. In this study, we build a high-performance freestanding aligned Ag/CdSe-CdS/poly(methyl methacrylate) (PMMA) texture to detect VOC vapors. The insight of this new VOC-sensing material is based on electrospinning techniques, ultraviolet (UV)/ozone treatments, and nano-optics. The incorporation of CdSe-CdS core-shell quantum rods (QR) and silver nanocrystals in the PMMA nanofibers amplifies the polarization response of long rods in VOC detection, thus increasing the sensitivity of VOC-sensing materials. Further, the uniaxial aligned Ag/QR/PMMA sensing material was treated by UV-ozone etching to increase surface absorption. The advanced double-sided UV-ozone etching on the uniaxial aligned Ag/QR/PMMA efficiently enhanced the extinction changes of VOCs. Two categories of solvents, typical VOCs and alcoholic VOCs, were put into practical tests for the Ag/QR/PMMA VOC-sensing materials. The Ag/QR/PMMA reached the detection limit for 100 ppm butanol within 1 min. The freestanding aligned Ag/CdSe-CdS/PMMA texture is a newly designed nanocomposite device for environmental risk monitoring. It can be accepted by the market compared to the other highly sensitive commercial VOC-sensing materials.