Pressureless glass crystallization of transparent yttrium aluminum garnet-based nanoceramics

Perspectives Toward Damage-Tolerant Nanostructure Ceramics

Advanced ceramic materials and devices call for better reliability and damage tolerance. In addition to their strong bonding nature, there are examples demonstrating superior mechanical properties of nanostructure ceramics, such as damage-tolerant ceramic aerogels that can withstand high deformation without cracking and local plasticity in dense nanocrystalline ceramics. The recent progresses shall be reviewed in this perspective article. Three topics including highly elastic nano-fibrous ceramic aerogels, load-bearing nanoceramics with improved mechanical properties, and implementing machine learning-assisted simulations toolbox in understanding the relationship among structure, deformation mechanisms, and microstructure-properties shall be discussed. It is hoped that the perspectives present here can help the discovery, synthesis, and processing of future structural ceramic materials that are insensitive to processing flaws and local damages in service.

Rapid synthesis of phosphor-glass composites in seconds based on particle self-stabilization

Phosphor-glass composites (PGC) are excellent candidates for highly efficient and stable photonic converters; however, their synthesis generally requires harsh procedures and long time, resulting in additional performance loss and energy consumption. Here we develop a rapid synthetic route to PGC within about 10 seconds, which enables uniform dispersion of Y3Al5O12:Ce3+ (YAG:Ce) phosphor particles through a particle self-stabilization model in molten tellurite glass. Thanks for good wettability between YAG:Ce micro-particles and tellurite glass melt, it creates an energy barrier of 6.94 × 105 zJ to prevent atomic-scale contact and sintering of particles in the melt. This in turn allows the generation of YAG:Ce-based PGC as attractive emitters with high quantum efficiency (98.4%) and absorption coefficient (86.8%) that can produce bright white light with luminous flux of 1227 lm and luminous efficiency of 276 lm W-1 under blue laser driving. This work shows a generalizable synthetic strategy for the development of functional glass composites.

Hybridization Engineering of Oxyfluoride Aluminosilicate Glass for Construction of Dual-Phase Optical Ceramics

The construction of transparent ceramics under mild conditionsand standard atmospheric pressure has great scientific and technological potential; however, it remains difficult to achieve when conventional ceramic sintering techniques are used. Herein, a mild strategy for constructing dual-phase optical ceramics with high crystallinity (>90%) based on the stepped dual-phase crystallization of hybridized aluminosilicate glass is presented. Theoretical and experimental studies reveal that the hybridization of the glass system enables a new balance between the glass-forming ability and crystallization and can overcome the uncontrolled devitrification phenomenon during the dense crystallization of glass. Transparent hybridized oxide-fluoride ceramics with fiber geometry and dual-phase microstructures are also successfully fabricated. The generality of the strategy is confirmed, and transparent ceramics with various chemical compositions and phase combinations are prepared. Additionally, the cross-section of the ceramic fibers can be easily tuned into a circle, square, trapezoid, or even a triangle. Furthermore, the practical applications of optical ceramics for lighting and X-ray imaging are demonstrated. The findings described here suggest a major step toward expanding the scope of optical ceramics.

Toward high-power-density laser-driven lighting: enhancing heat dissipation in phosphor-in-glass film by introducing h-BN

In this work,  hexagonal boron nitride (h-BN) nanocrystals as functional additives in a phosphor-in-glass film are shown to substantially increase the luminous performance driven by a blue laser. Microstructural and spectroscopic studies reveal that h-BN particles distributed over the whole glass matrix build in situ a local heat conductive path which effectively accelerates heat dissipation and so greatly relieves the "thermal run-away effect". The developed composite material with fine thermal manipulation may be a promising phosphor color converter for high-power-density laser-driven lighting.

Afterglow-Suppressed Lu2O3:Eu3+ Nanoscintillators for High-Resolution and Dynamic Digital Radiographic Imaging

Lu_2(1-x)Eu_2xO₃ nanoscintillators (x = 0.005, 0.01, 0.03, 0.05, 0.07, and 0.10) with red emission were synthesized by a coprecipitation method. It is found that their photo- and radioluminescence intensities increase with increasing Eu³⁺ concentration until x = 0.05. According to their concentration-dependent luminescence intensity ratios (I₆₁₀(C₂)/I₅₈₂(S₆)), the existing energy transfer from Eu³⁺(S₆) (occupying S₆ sites) to Eu³⁺(C₂) (occupying C₂ sites) can be confirmed. Based on the spectral data and density functional theory (DFT) calculations, the origin of Lu₂O₃:Eu³⁺ persistent luminescence at low concentration might be related to the tunneling processes between Eu³⁺ (occupying C₂ and S₆ sites) and oxygen interstitials (O_i^×). After dispersing afterglow-suppressed Lu₂O₃:Eu³⁺ nanoscintillators into polymethyl methacrylate (PMMA) polymer-acetone solution, flexible PMMA-Lu₂O₃:Eu³⁺ composite films with high thermal stability and radiation resistance were fabricated by a doctor blade method. As the flexible composite film was used as an imaging plate, static X-ray images with high spatial resolution (5.5 lp/mm) under an extremely low dose of ∼1.1 μGy_air can be acquired. When a watch with a moving second hand was used as an object, the dynamic X-ray imaging can be realized under a dose rate of 55 μGy_air·s^-1. Our results demonstrate that Lu₂O₃:Eu³⁺ nanoscintillators can be regarded as candidate materials for dynamic digital radiographic imaging.

Crystallization Mechanism and Optical Properties of Antimony-Germanate-Silicate Glass-Ceramic Doped with Europium Ions

Glass-ceramic is semi-novel material with many applications, but it is still problematic in obtaining fibers. This paper aims to develop a new glass-ceramic material that is a compromise between crystallization, thermal stability, and optical properties required for optical fiber technology. This compromise is made possible by an alternative method with a controlled crystallization process and a suitable choice of the chemical composition of the core material. In this way, the annealing process is eliminated, and the core material adopts a glass-ceramic character with high transparency directly in the drawing process. In the experiment, low phonon antimony-germanate-silicate glass (SGS) doped with Eu³⁺ ions and different concentrations of P₂O₅ were fabricated. The glass material crystallized during the cooling process under conditions similar to the drawing processes'. Thermal stability (DSC), X-ray photo analysis (XRD), and spectroscopic were measured. Eu³⁺ ions were used as spectral probes to determine the effect of P₂O₅ on the asymmetry ratio for the selected transitions (⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂). From the measurements, it was observed that the material produced exhibited amorphous or glass-ceramic properties, strongly dependent on the nucleator concentration. In addition, the conducted study confirmed that europium ions co-form the EuPO₄ structure during the cooling process from 730 °C to room temperature. Moreover, the asymmetry ratio was changed from over 4 to under 1. The result obtained confirms that the developed material has properties typical of transparent glass-ceramic while maintaining high thermal stability, which will enable the fabrication of fibers with the glass-ceramic core.

Making Ultra-Tough Nanoceramics by Columnar Submicrocrystals with Three-Level Micro-Nano Structures

The low fracture toughness of equiaxed nanocrystalline ceramics is the main bottleneck of its wide range of commercial applications. Here, the authors report a method to overcome this limitation for preparing ultra-tough nanoceramics from using amorphous and supersaturated Al₂ O₃ /ZrO₂ solid solution micro-powders, which is fabricated by Al-O₂ ultrahigh-temperature combustion synthesis assisted rapid water cooling. The Al₂ O₃ /ZrO₂ micro-powders containing amorphous and metastable dendritic solid solutions can induce the three-level micro-nano structure (submicro/nano/supra-nano) of the high-content (up to 70-90%) columnar submicro-crystals accompanied with high-density nanoprecipitation after sintering or annealing, which makes the fracture toughness of Al₂ O₃ /ZrO₂ ceramics with a unique combination of high-strength and high-hardness increased by 50-100%. This method is beneficial to microstructural design of high-performance ceramics and can be widely applied to various ceramic systems, coupled with simplicity, low-cost, and high-efficiency, making it suitable to industrially produce large-sized nanoceramics with specific grain geometry in large quantities.

Seed-Crystal-Induced Cold Sintering Toward Metal Halide Transparent Ceramic Scintillators

Scintillators with high spatial resolution at a low radiation dose rate are desirable for X-ray medical imaging. To challenge the state-of-art technology, it is necessary to design large-area wafers with high light yield, oriented light transport, and reduced light scattering. Here, a seed-crystal-induced cold sintering is adopted and a <001>-textured TPP₂ MnBr₄ (TPP: tetraphenylphosphonium) transparent ceramic is fabricated with a large-area wafer of 5 cm in diameter, exhibiting high optical transparency of above 68% over the 450-600 nm range. The compelling scintillation performance of the TPP₂ MnBr₄ wafer includes a light yield of ≈78 000 ± 2000 photons per MeV, a low detection limit 8.8 nanograys per second, about 625 times lower than the requirement of X-ray diagnostics (5500 nanograys per second), and an energy resolution of 17% for high-energy γ-rays (662 keV). X-ray imaging demonstrates a high spatial resolution of 15.7 lp mm^-1 . Moreover, the designed material exhibits good retention of the radioluminescence intensity and light yield. This work presents a paradigm for achieving light-guiding properties with high transparency and large-area fabrication by grain orientation engineering, and the transparent, textured metal halide ceramic scintillator is expected to provide a route for advancement in the X-ray imaging of tomorrow.

Glass-Crystallized Luminescence Translucent Ceramics toward High-Performance Broadband NIR LEDs

Near-infrared (NIR) phosphor-converted light-emitting diodes (pc-LEDs) are newly emergent broadband light sources for miniaturizing optical systems like spectrometers. However, traditional converters with NIR phosphors encapsulated by organic resins suffer from low external quantum efficiency (EQE), strong thermal quenching as well as low thermal conductivity, thus limiting the device efficiency and output power. Through pressureless crystallization from the designed aluminosilicate glasses, here broadband Near-infrared (NIR) emitting translucent ceramics are developed with high EQE (59.5%) and excellent thermal stability (<10% intensity loss and negligible variation of emission profile at 150 °C) to serve as all-inorganic visible-to-NIR converters. A high-performance NIR phosphor-converted light emitting diodes is further demonstrated with a record NIR photoelectric efficiency (output power) of 21.2% (62.6 mW) at 100 mA and a luminescence saturation threshold up to 184 W cm^-2 . The results can substantially expand the applications of pc-LEDs, and may open up new opportunity to design efficient broadband emitting materials.

Anisotropic crystallization of YAG on the surface of glass by CO2 laser irradiation

This work studied the laser process and crystallization of 2D YAG from yttrium aluminosilicate glass. Anisotropic YAG crystallized through a continuous wave (CW) CO2 laser irradiation process. We demonstrate the...

Investigations of Thermal Stability and Spectroscopic Features of Sm3+ Doped Strontium Aluminate Glasses

In the present work, a series of Sm3+ doped transparent strontium aluminate glasses with the composition Al2O3-(3-x)SrO: xSm3+ (x = 0, 0.01, 0.03, 0.06, 0.1, 0.2) were fabricated by a containerless process using an aerodynamic levitation furnace. The structural characteristics, density, Vicker’s hardness, and thermal and spectroscopic behaviors of these glasses were investigated. All the glasses exhibit excellent thermal stabilities (Tg ≥ 792 °C) and the glass-forming ability is enhanced with the increasing content of Sm3+. The emission spectra recorded under an excitation of 404 nm show four emission transitions as a result of 4G5/2 translated to the lower states of 6H5/2, 6H7/2, 6H9/2, and 6H11/2, and a bright orange-reddish luminescence can be observed in Al2O3-(3-x)SrO: xSm3+ glasses. The high thermal stability, good glass-forming ability and excellent hardness provide new options for the development of visible orange-reddish lasers and smart photoluminescent glass coating materials.

Emergence of A-Site Cation Order in the Small Rare-Earth Melilites SrREGa3O7 (RE = Dy-Lu, Y)

SrREGa₃O₇ melilite ceramics with large rare-earth elements (RE = La to Y) are famous materials especially known for their luminescence properties. Using an innovative approach, the full and congruent crystallization from glass process, SrREGa₃O₇ transparent polycrystalline ceramics with small rare earth elements (RE = Dy-Lu and Y) have been successfully synthesized and characterized. Interestingly, compared to the classic tetragonal (P4̅2₁m) melilite structure composed of mixed Sr/RE cationic sites, these compositions can crystallize in a 3 × 1 × 1 orthorhombic (P2₁2₁2) superstructure. A detailed study of the superstructure, investigated using different techniques (synchrotron and neutron powder diffraction, STEM-HAADF imaging, and EDS mapping), highlights the existence of a Sr/RE cation ordering favored by a large Sr/RE size mismatch and a sufficiently small RE cation. An appropriate control of the synthesis conditions through glass crystallization enables the formation of the desired polymorphs, either ordered or disordered. The influence of this tailored cationic ordering/disordering on the RE luminescent spectroscopic properties have been investigated. A stronger structuration of the RE emission band is observed in the ordered ceramic compared to the disordered ceramic and the glass, whose band shapes are very similar, indicating that the RE environments in the glass and disordered ceramic are close.

Broadband emission Gd3Sc2Al3O12:Ce3+ transparent ceramics with a high color rendering index for high-power white LEDs/LDs

The discovery of single structure Ce³⁺ doped garnet transparent ceramics (TCs) with a broad full width at half maximum (FWHM) is essential to realize a high CRI for high-power white light emitting diodes (LEDs) and laser diodes (LDs). In this work, by utilizing the ion substitution engineering strategy, pure phase Gd₃Sc₂Al₃O₁₂:Ce³⁺ (GSAG:Ce) TC with a broad FWHM of 132.4 nm and a high CRI value of 80.7 was fabricated through the vacuum sintering technique for the first time. The optimized in-line transmittance of TCs was 58.4% @ 800 nm. Notably, the GSAG:Ce TCs exhibited a remarkable red shift from 546 nm to 582 nm, with a high internal quantum efficiency (IQE) of 46.91%. The degraded thermal stability in Ce:GSAG TCs was observed compared with that of Ce:YAG TC, owing to the narrowed band gap of GSAG. Additionally, remote excitation white LEDs/LDs were constructed by combining GSAG:Ce TCs with blue LED chips or laser sources. A tunable color hue from yellow to shinning white was achieved in white LEDs, whereas the acquired CRI and CCT of the white LDs were 69.5 and 7766 K, respectively. This work provides a new perspective to develop TCs with high CRI for their real applications in high-power white LEDs/LDs.

Glass crystallization making red phosphor for high-power warm white lighting

Rapid development of solid-state lighting technology requires new materials with highly efficient and stable luminescence, and especially relies on blue light pumped red phosphors for improved light quality. Herein, we discovered an unprecedented red-emitting Mg₂Al₄Si₅O₁₈:Eu²⁺ composite phosphor (λ_ex = 450 nm, λ_em = 620 nm) via the crystallization of MgO-Al₂O₃-SiO₂ aluminosilicate glass. Combined experimental measurement and first-principles calculations verify that Eu²⁺ dopants insert at the vacant channel of Mg₂Al₄Si₅O₁₈ crystal with six-fold coordination responsible for the peculiar red emission. Importantly, the resulting phosphor exhibits high internal/external quantum efficiency of 94.5/70.6%, and stable emission against thermal quenching, which reaches industry production. The maximum luminous flux and luminous efficiency of the constructed laser driven red emitting device reaches as high as 274 lm and 54 lm W^-1, respectively. The combinations of extraordinary optical properties coupled with economically favorable and innovative preparation method indicate, that the Mg₂Al₄Si₅O₁₈:Eu²⁺ composite phosphor will provide a significant step towards the development of high-power solid-state lighting.

Laser-induced and space-selective crystallization of yttrium aluminum garnet crystal from SiO2/Al2O3/Y2O3/KF/Na2O/AlF3/B2O3 glass system

Femtosecond laser-induced crystallization in glasses is of interest because of its significant applications in optics and photonics.

Hexagonal Sr1-x/2Al2-xSixO4:Eu2+,Dy3+ transparent ceramics with tuneable persistent luminescence properties

Co-doped hexagonal Sr1-x/2Al2-xSixO4:Eu2+,Dy3+ (0.1 ≤ x ≤ 0.5) transparent ceramics have been elaborated by full glass crystallization. The compositions with low SiO2 content (x ≤ 0.4) require fast quenching conditions to form glass, i.e. specific elaboration processes such as aerodynamic levitation coupled to laser heating, whereas the x = 0.5 glass composition can be prepared on a large scale by the classic melt-quenching method in commercial furnaces. After a single thermal treatment, the resulting SrAl2O4-based transparent ceramics show varying photoluminescence emission properties when x increases. These variations are also observable in persistent luminescence, resulting in an afterglow colour-tuning ranging from green to light blue. Afterglow excitation spectra highlight the possible activation in the visible range of the obtained persistent luminescence. Indeed, persistent luminescence of hexagonal Sr0.75Al1.5Si0.5O4:Eu2+,Dy3+ large transparent ceramics has been successfully charged using a typical smartphone low power white light source. Moreover, thermoluminescence glow curves of samples containing different Dy3+ doping concentrations are studied to gain insights regarding the traps' origin and depth. Coupling thermoluminescence results together with luminescence thermal quenching and band gap calculations appear useful to understand the charge trapping and detrapping evolution with the material composition. Varying the Si-content in hexagonal Sr1-x/2Al2-xSixO4:Eu2+,Dy3+ compounds appears as a promising strategy to obtain transparent materials with tuneable green to light blue persistent luminescence.

Y2O3-Al2O3 microsphere crystallization analyzed by electron backscatter diffraction (EBSD)

The crystallization of glass microspheres in the Y₂O₃-Al₂O₃-system produced from precursor powders of four different nominal compositions via flame synthesis is analyzed in detail by electron microscopy with a focus on electron backscatter diffraction (EBSD). Growth models are formulated for individual microspheres crystallized during flame synthesis as well as after an additional heat treatment step. 16 different types of crystallized bodies are cataloged for future reference. They are presented without regard for their relative occurrence; some are extremely rare but illustrate the possibilities of flame synthesis in the analyzed system. All three phases in the binary Y₂O₃-Al₂O₃-phase diagram (Y₃Al₅O₁₂, YAlO₃ and Y₄Al₂O₉) and α-alumina are located by EBSD. Energy dispersive X-ray spectrometry results obtained from these microspheres show that their chemical composition can deviate from the nominal composition of the precursor powder. The multitude of differing microsphere types showing polygon and dendritic crystal growth as well as phase separation indicate that flame synthesis can lead to a wide variety of parameters during microsphere production, e.g. via irregular flight paths through the flame, contaminants or irregular cooling rates.

Highly efficient phosphor-glass composites by pressureless sintering

The development of high-power white light-emitting diodes demands highly efficient and stable all-inorganic color converters. In this respect, phosphor-glass/ceramic composites show great promise as they could combine the merits of high quantum efficiency of phosphors and high chemical and thermal stabilities of glass/ceramic matrices. However, strong interfacial reaction between phosphors and matrices at high temperature results in quantum efficiency loss of the embedded phosphors, and traditional solutions rely on high-pressure consolidation techniques. Here we report the intrinsic inhibition of interfacial reaction by using silica glass rather than multicomponent glasses as the matrix. The embedment of phosphors is achieved via a pressureless sintering method, rendering these color-tunable phosphor-glass composites not only accessible to three-dimensional printing technique, but also highly efficient (internal quantum efficiency >90.0%), thermally stable at 1200 °C and hydrothermally stable at 200 °C. Our results provide a facile and general strategy for developing all-inorganic functional composites.

Phosphor-glass/ceramic composites are attractive for high-power white light-emitting diodes, but interfacial reaction leads to loss of quantum efficiency. Here the authors report a reduction sintering method for embedment of phosphors into silica glass with limited interfacial reaction.

Nano Wave Plates Structuring and Index Matching in Transparent Hydroxyapatite-YAG: Ce Composite Ceramics for High Luminous Efficiency White Light-Emitting Diodes

Replacing traditional luminous silicone or resins with phosphor in ceramics (PiCs) as color converters has been proposed as an efficient way to improve thermal stability of high-power white light-emitting diodes (WLEDs). However, excessive light scattering in existing PiCs results in enormous phosphor-converted light losses, which makes the luminosity of current PiCs color converters less efficient and means that they can only be used in devices working in reflective mode. By introducing nano wave plate structuring and Rayleigh scattering, luminous hydroxyapatite (HA)-YAG: Ce ceramics are prepared from mesoporous HA nanorods and YAG: Ce phosphors at 850 °C, enabling for the first time WLEDs equipped with PiC color converters in transmission mode. With low-temperature sintering and a highly transparent matrix, the quantum yield of HA-YAG: Ce retains ≈90% of the raw phosphor, and WLEDs with the color converters exhibit a record luminous efficiency of 170 lm W^-1 and a correlated color temperature below 4500 K. A facile and practical strategy of using nano structural modulation to eliminate birefringence-induced light scattering for fabricating high-performance ceramic converters suitable for multiple mode luminaires is demonstrated.

A wear-resistant TiO2 nanoceramic coating on titanium implants for visible-light photocatalytic removal of organic residues

An effective treatment for peri-implantitis is to completely remove all the bacterial deposits from the contaminated implants, especially the organic residues, to regain biocompatibility and re-osseointegration, but none of the conventional decontamination treatments has achieve this goal. The photocatalytic activity of TiO₂ coating on titanium implants to degrade organic contaminants has attracted researchers' attention recently. But a pure TiO₂ coating only responses to harmful ultraviolet light. Additionally, the poor coating mechanical properties are unable to protect the coating integrity versus initial mechanical decontamination. To address these issues, a unique TiO₂ nanoceramic coating was fabricated on titanium substrates through an innovative plasma electrolytic oxidation (PEO) based procedure, which showed a disordered layer with oxygen vacancies on the outmost part. As a result, the coating could decompose methylene blue, rhodamine B, and pre-adsorbed lipopolysaccharide (LPS) under visible light. Additionally, the coating showed two-fold higher hardness than untreated titanium and excellent wear resistance against steel decontamination instruments, which could be attributed to the specific micro-structure, including the densely packed nanocrystals and good metallurgical combination. Moreover, the in vitro response of MG63 cells confirmed that the coating had comparable biocompatibility and osteoconductivity to untreated titanium substrates. This study provides a unique coating technique as well as a photocatalytic cleaning strategy to enhance decontamination of titanium dental implants, which will favour the development of peri-implantitis treatments. STATEMENT OF SIGNIFICANCE: The treatment of peri-implantitis is based on the complete removal of bacterial deposits, especially the organic residues, but conventional decontamination treatments are hard to achieve it. The photocatalytic activity of TiO₂ coating on titanium implants to degrade organic contaminants provides a promising strategy for deeper decontamination, but its nonactivation to visible light and poor mechanical properties have limited its application. To address these issues, a unique TiO₂ nanoceramic coating was fabricated on titanium substrates based on plasma electrolytic oxidation. The coating showed enhanced visible-light photocatalytic activity, excellent wear resistance and satisfied biocompatibility. Based on this functional coating, it is promising to develop a more efficient strategy for deep decontamination of implant surface, which will favour the development of peri-implantitis treatments.

Transparent Ceramics Enabling High Luminous Flux and Efficacy for the Next-Generation High-Power LED Light

By designing novel chemical compositions and controlling precursor powders, perfect transparent ceramics (TCs) of Gd₃Al₄GaO₁₂:2%Ce³⁺ garnets (GAGG:2%Ce³⁺) were achieved for the first time. Ce³⁺ distributions in ceramics were revealed by micromorphology and micro-cathodoluminescence. Benefiting from the components that are rich in red emission, warm light with a correlated color temperature of about 2800 K was generated when TC was used in high-power (hp) blue light emitting diodes (LEDs) (∼450 nm, ∼34 W driven at 1 A). The hp LED device shows high brightness with a luminous flux nearly 2100 lm. The luminous efficacy even reaches 388 lm/W, which is the highest value reported till now, indicating that the use of GAGG:2%Ce³⁺ TCs promises energy saving. We believe that this work will open a new perspective to develop TCs for next-generation hp LED lighting to substitute traditional hp xenon lamps and high-pressure sodium lamps.

Warm White Light with a High Color-Rendering Index from a Single Gd3Al4GaO12:Ce3+ Transparent Ceramic for High-Power LEDs and LDs

Transparent ceramics (TCs) are promising for high-power (hp) white light-emitting diode (WLED) and laser diode (LD) lighting. However, comfortable warm white light has not been achieved only using a single TC in hp-WLEDs/LDs. Herein, highly transparent Gd₃Al₄GaO₁₂:Ce³⁺ (GAGG:Ce³⁺) TCs (transmittance, T = 55.9-80.2%) were prepared via a solid-state reaction. Ce³⁺ as a doped activator center in grains plays a positive role in luminescence based on the microstructural investigations by scanning electron microscopy and the cathodoluminescence system. T decreases upon increasing the Ce³⁺ concentration and/or the ceramic thickness, whereas the luminous efficacy of hp-WLEDs/LDs goes up. For blue hp-LEDs driven at 350 mA or LDs of 2 W, warm white light with a low correlated-color temperature of ∼3000 K was achieved by a single GAGG:Ce³⁺ TC, benefiting from its broad emission band (full width at half maximum, FWHM = 133-137 nm) and abundant red components (peaking at about 568-574 nm). The color-rendering index of hp-WLEDs reaches 78.9. These results are much better than the performance of the traditional Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce³⁺) TC, indicating that GAGG:Ce³⁺ TCs are promising color converters for hp-WLEDs/LDs with a comfortable warm white light.

Increasing Fracture Toughness and Transmittance of Transparent Ceramics using Functional Low-Thermal Expansion Coatings

Transparent polycrystalline ceramics have the potential to enable applications no other materials can, but to do so their strength and toughness must be improved. However, surface strengthening treatments like those used for glasses have so far remained elusive. Here for the first time, we report on engineering unprecedented surface compression, of the magnitude achieved for ion-exchange strengthened glasses (~750 MPa) in transparent ceramics. This was achieved by applying functional, low thermal-expansion yttria coatings onto yttria-stabilized zirconia substrates and thermally treating. In some instances, the treatment more than doubled the fracture toughness while simultaneously increasing light transmittance.

Spark plasma sintering of bulk SrAl2O4-Sr3Al2O6 eutectic glass with wide-band optical window

SrAl₂O₄-Sr₃Al₂O₆ eutectic glass was prepared by using an aerodynamic levitator equipped with a CO₂ laser device. A bulk transparent amorphous sample was obtained by the spark plasma sintering (SPS) of the prepared eutectic glass. XRD, a UV-vis-NIR spectrophotometer and FT-IR were employed to characterize the phase evolution and optical properties. The results show that the bulk SrAl₂O₄-Sr₃Al₂O₆ samples fabricated by the containerless process and SPS between 852 °C-857 °C were fully amorphous. The amorphous sample has a wide transparent window between 270 nm and 6.2 μm. The average refractive index in the visible light region is 1.680 and the Abbe number is 27.4. The prepared bulk SrAl₂O₄-Sr₃Al₂O₆ eutectic glass with the wide-band optical window may be a promising candidate for optical applications.