Robust lasing modes in coupled colloidal quantum dot microdisk pairs using a non-Hermitian exceptional point

Mie scatterers bring a resonator to an exceptional point

Exceptional points have given rise to many intriguing optical phenomena that are of fundamental importance for a variety of breakthrough technologies. The pre-defined Mie scatterers can bring a resonator to an exceptional point, and result in enhanced quality factor through coherently suppressing the backward scattering.

Turning whispering-gallery-mode responses through Fano interferences in coupled all-dielectric block-disk cavities

Here, we theoretically demonstrate a strategy for efficiently turning whispering-gallery-mode (WGM) responses of a subwavelength dielectric disk through their near-field couplings with common low-order electromagnetic resonances of a dielectric block. Both simulations and an analytical coupled oscillator model show that the couplings are Fano interferences between dark high-quality WGMs and bright modes of the block. The responses of a WGM in the coupled system are highly dependent on the strengths and the relative phases of the block modes, the coupling strength, and the decay rate of the WGM. The WGM responses of coupled systems can exceed that of the individual disk. In addition, such a configuration will also facilitate the excitation of WGMs by a normal incident plane wave in experiments. These results could enable new applications for enhancing light-matter interactions.

Two-dimensional heterostructure quasi-BIC photonic crystal surface-emitting laser with low divergence

High beam quality, large-area output, and small footprint are significant pursuing goals for vertical-cavity surface-emitting lasers (VCSELs), which impose strict requirements on tight light confinements with minimized radiation losses. To achieve this, bound states in the continuum (BICs) have been demonstrated as an effective way of trapping light. Here, we combine BICs and photonic bandgaps to realize a quasi-BIC single-mode photonic crystal (PhC) laser on a colloidal quantum dots (CQDs)/silicon oxide (SiO2) hybrid integrated platform. The PhC cavity is a defect-free hexagonal heterostructure with three regions, and the thin CQDs film is embedded within the SiO2 nanopillar planar array as both an optical gain material and a backbone for the PhC. The mode gaps between different regions provide the lateral confinement while the quasi-BICs near the Γ-point generate the small-divergence vertical radiation coupling, resulting in a well-defined emission concentrating within ±1.85° of the normal surface direction and an optical pumping energy density threshold of 216.75 μJ/cm2. Our results demonstrate the design flexibility and versatility of the quasi-BIC laser even with a low contrast of a refractive index between the PhC slab and the substrate, which has potential applications in cavity quantum electrodynamics, nonlinear optics, and integrated photonics.

Organic Synthetic Photonic Systems with Reconfigurable Parity-Time Symmetry Breaking for Tunable Single-Mode Microlasers

Synthetic photonic materials exploiting the quantum concept of parity-time (PT) symmetry lead to an emerging photonic paradigm-non-Hermitian photonics, which is revolutionizing the photonic sciences. The non-Hermitian photonics dealing with the interplay between gain and loss in PT synthetic photonic material systems offers a versatile platform for advancing microlaser technology. However, current PT-symmetric microcavity laser systems only manipulate imaginary parts of the refractive indices, suffering from limited laser spectral bandwidth. Here, an organic composite material system is proposed to synthesize reconfigurable PT-symmetric microcavities with controllable complex refractive indices for realizing tunable single-mode laser outputs. A grayscale electron-beam direct-writing technique is elaborately designed to process laser dye-doped polymer films in one single step into microdisk cavities with periodic gain and loss distribution, which enables thresholdless PT-symmetry breaking and single-mode laser operation. Furthermore, organic photoisomerizable compounds are introduced to reconfigure the PT-symmetric systems in real-time by tailoring the real refractive index of the polymer microresonators, allowing for a dynamically and continuously tunable single-mode laser output. This work fundamentally enhances the PT-symmetric photonic systems for innovative design of synthetic photonic materials and architectures.

All-colloidal parity-time-symmetric microfiber lasers balanced between the gain of colloidal quantum wells and the loss of colloidal metal nanoparticles

Lasers based on semiconductor colloidal quantum wells (CQWs) have attracted wide attention, thanks to their facile solution-processability, low threshold and wide range spectral tunability. Colloidal microlasers based on whispering-gallery-mode (WGM) resonators have already been widely demonstrated. However, due to their microscale size typically supporting multiple modes, they suffer from multimode competition and higher threshold. The ability to control the multiplicity of modes oscillating within colloidal laser resonators and achieving single-mode lasers is of fundamental importance in many photonic applications. Here we show that as a unique, simple and versatile architecture of all-colloidal lasers intrinsically enabled by balanced gain/loss segments, the lasing threshold reduction and spectral purification can be readily achieved in a system of a WGM-supported microfiber cavity by harnessing the notions of parity-time symmetry (PT). In particular, we demonstrate a proof-of-concept PT-symmetric microfiber laser employing CQWs as the colloidal gain medium along with a carefully tuned nanocomposite of Ag nanoparticles (Ag NPs) incorporated into a PMMA matrix altogether and conveniently coated around a coreless microfiber as a rigorously tailored colloidal loss medium to balance the gain. The realization of gain/loss segments in our PT-symmetric all-colloidal arrangement is independent of selected pumping, reducing the complexity of the system and making compact device applications feasible, where control over the pumping is not possible. We observed a reduction in the number of modes, resulting in a reduced threshold and enhanced output power of the PT-symmetric laser. The PT-symmetric CQW-WGM microcavity architecture offers new opportunities towards simple implementation of high-performance optical resonators for colloidal lasers.

Intrinsic mode coupling in mirror-symmetric whispering gallery resonators

Rotationally symmetric micro-cavities with disk, ring or toroidal shape displaying whispering gallery modes (WGMs) play an essential role in modern-day photonics. Due to the reduced symmetry of such resonators compared to spheres, an exact analytical model yielding WGMs as solutions does not exist. The established WGM classification scheme based on approximated analytical solutions is generally useful but neglects a possible interaction between the different modes. In this paper, we assess the limitation of the validity of this established classification based on extensive finite element method (FEM) simulations. We investigate respective mode couplings as well as underlying selection rules based on avoided crossings of the modes' resonance wavelengths. We propose conserved mode properties solely based on true symmetries of the underlying refractive-index distribution and deduce a novel WGM classification scheme.

Nonlinear-dissipation-induced nonreciprocal exceptional points

Exceptional points (EPs) have revealed a lot of fundamental physics and promise many important applications. The effect of system nonlinearity on the property of EPs is yet to be well studied. Here, we propose an optical system with nonlinear dissipation to achieve a nonreciprocal EP. Our system consists of a linear whispering-gallery-mode microresonator (WGMR) coupling to a WGMR with nonlinear dissipation. In our system, the condition of EP appearance is dependent on the field intensity in the nonlinear WGMR. Due to the chirality of intracavity field intensity, the EPs and the transmission of the system can be nonreciprocal. Our work may pave the way to exploit nonreciprocal EP for optical information processing.

Ultrastable low-cost colloidal quantum dot microlasers of operative temperature up to 450 K

Quantum dot microlasers, as multifunctional optical source components, are of great importance for full-color high-pixel display, miniaturized coherent lighting, and on-chip integrated photonic and electronic circuits. Since the first synthesis of colloidal quantum dots (CQD) in the 1990s, motivation to realize high-performance low-cost CQD micro-/nanolasers has been a driving force for more than three decades. However, the low packing density, inefficient coupling of CQDs with optical cavities, and the poor thermal stability of miniaturized complex systems make it challenging to achieve practical CQD micro-/nanolasers, especially to combine the continuous working ability at high temperatures and the low-cost potential with mass-produced synthesis technologies. Herein, we developed close-packed CQD-assembled microspheres and embedded them in a silica matrix through the rapid self-aggregation and solidification of CdSe/ZnS CQD. This technology addresses the core issues of photoluminescence (PL) quenching effect and low optical gain in traditional CQD laser research. High-efficiency low-threshold CQD microlasers are demonstrated together with long-playing (40 min) working stability even at 450 K under pulsed laser excitation, which is the highest operational temperature for CQD lasers. Moreover, single-mode CQD microlasers are obtained with tunable wavelengths across the entire visible spectral range. The chemosynthesis process supports the mass-produced potential of high-density integrated CQD microlasers, promoting CQD-based low-cost high-temperature microdevices.

Experimental demonstration of nanophotonic devices and circuits with colloidal quantum dot waveguides

Colloidal quantum dots (CQDs) have been widely used as absorption or emission materials due to their large-absorption and high-gain properties. However, they are seldom used as low-loss materials in passive nanophotonic devices. Moreover, combinations of two or more properties of CQDs are difficult owing to miscibility of different CQDs. Here, low-loss CQD waveguides are experimentally achieved at wavelengths longer than their fluorescence wavelengths. By using the low-loss and uniform CQD waveguides, various passive nanophotonic devices and a nanophotonic circuit are successfully demonstrated. Furthermore, by employing both of a pattern-assisted stacking and a transfer-printing approach, the miscible problem of different CQDs is addressed, and a low-loss CQD waveguide and a high-gain CQD laser are experimentally integrated on a single chip.

Vector Exceptional Points with Strong Superchiral Fields

Exceptional points (EPs), branch points of complex energy surfaces at which eigenvalues and eigenvectors coalesce, are ubiquitous in non-Hermitian systems. Many novel properties and applications have been proposed around the EPs. One of the important applications is to enhance the detection sensitivity. However, due to the lack of single-handed superchiral fields, all of the proposed EP-based sensing mechanisms are only useful for the nonchiral discrimination. Here, we propose theoretically and demonstrate experimentally a new type of EP, which is called a radiation vector EP, to fulfill the homogeneous superchiral fields for chiral sensing. This type of EP is realized by suitably tuning the coupling strength and radiation losses for a pair of orthogonal polarization modes in the photonic crystal slab. Based on the unique modal-coupling property at the vector EP, we demonstrate that the uniform superchiral fields can be generated with two beams of lights illuminating the photonic crystal slab from opposite directions. Thus, the designed photonic crystal slab, which supports the vector EP, can be used to perform surface-enhanced chiral detection. Our findings provide a new strategy for ultrasensitive characterization and quantification of molecular chirality, a key aspect for various bioscience and biomedicine applications.

Nonconservative Coupling in a Passive Silicon Microring Resonator

The authors report on nonconservative coupling in a passive silicon microring between its clockwise and counterclockwise resonance modes. The coupling coefficient is adjustable using a thermo-optic phase shifter. The resulting resonance of the supermodes due to nonconservative coupling is predicted in theory and demonstrated in experiments. This Letter paves the way for fundamental studies of on-chip lasers and quantum photonics, and their potential applications.

Control of Whispering Gallery Modes and PT-Symmetry Breaking in Colloidal Quantum Dot Microdisk Lasers with Engineered Notches

Whispering gallery mode resonators have been demonstrated to be a great way to achieve superior optical cavities with high quality factor and small mode volume. However, due to the high sensitivity of these modes to the properties of the resonator boundary, they are susceptible to parasitic splitting of clockwise and counterclockwise modes. In this work, we investigate the effect of implantation of an engineered notch into the boundary of a circular microdisk resonator fabricated from colloidal quantum dots, which are particularly sensitive to boundary defects. We observed a strong reduction of parasitic mode splitting with introduction of a large engineered notch, as well as enhanced directionality of laser emission. We further investigate the performance of these resonators in evanescently coupled pairs, where the modal interaction allows modulation of laser behavior through variation of the gain and loss induced by the optical pump. We show that two distinct cases of modal interaction can be achieved by adjusting the size of the engineered notch, providing a bridge between intra- and interdisk modal interactions for laser spectral control.