Artificial coiled coil biomineralisation protein for the synthesis of magnetic nanoparticles

Highly Crystalline and Robust Donor-Acceptor Type Covalent Organic Frameworks for Long-life Sodium-Ion Battery Cathodes

Covalent organic frameworks (COFs) hold great potential in sodium-ion battery cathodes. However, most reported COF-based electrodes show unsatisfying capacity and rate performance due to their limited redox site density, low crystallinity, and poor conductivity. Herein, a highly crystalline and robust donor-acceptor type COF with abundant redox active sites is developed by the polymerization of donor unit benzo[1,2-b:3,4-b″:5,6-b″']trithiophene-2,5,8-tricarbaldehyde) (BTT) and acceptor unit s-indacene-1,3,5,7(2H,6H)-tetrone (ICTO) (denoted as BTT-ICTO) for cathodic Na+ storage. The BTT-ICTO-graphene composites (BTT-ICTO@G) synthesized by in situ growth have a loose sheet structure with rough surfaces, contributing to the improved conductivity and active site utilization of BTT-ICTO. Benefiting from the robustness of BTT-ICTO linked by ethylene bonds, the BTT-ICTO@G cathodes exhibit a high capacity of 325 mAh g-1 at 0.1 A g-1 with a high active site utilization of 80%, excellent rate performance of 190 mAh g-1 at 5.0 A g-1, and exceptional cycle performances of 196 mAh g-1 over 10 000 cycles at 2.0 A g-1 with only 0.0015% decay per cycle. These properties make the BTT-ICTO@G cathodes among the best-reported COF-based sodium-ion battery cathodes. In addition, in situ Raman, ex situ Fourier transform infrared, and theoretical calculations disclose the reaction pathway of Na+ storage.

Biomineralization in magnetotactic bacteria: From diversity to molecular discovery-based applications

The synthesis of magnetic nanoparticles (Fe3O4 or Fe3S4) within the membrane-bound organelles known as magnetosomes in magnetotactic bacteria (MTB) is a remarkable example of microbial-controlled biomineralization. Studying MTB biomineralization is crucial not only for understanding the origin and evolution of magnetoreception and bacterial organelles but also for advancing biotechnological and biomedical applications of MTB cells and magnetosomes. After decades of research, MTB have revealed unexpected diversity and complexity. The mechanisms underlying magnetosome biomineralization in MTB have been continuously documented using a few model MTB strains. In this review, we provide an overview of recent findings related to MTB diversity and focus primarily on the current understanding of magnetosome biosynthesis. Additionally, we summarize the growing biotechnological and biomedical applications derived from molecular studies of MTB and their magnetosomes.

Elucidating the Bioinspired Synthesis Process of Magnetosomes-Like Fe3O4 Nanoparticles

Iron oxide nanoparticles are a kind of important biomedical nanomaterials. Although their industrial-scale production can be realized by the conventional coprecipitation method, the controllability of their size and morphology remains a huge challenge. In this study, a kind of synthetic polypeptide Mms6-28 which mimics the magnetosome protein Mms6 is used for the bioinspired synthesis of Fe3O4 nanoparticles (NPs). Magnetosomes-like Fe3O4 NPs with uniform size, cubooctahedral shape, and smooth crystal surfaces are synthesized via a partial oxidation process. The Mms6-28 polypeptides play an important role by binding with iron ions and forming nucleation templates and are also preferably attached to the [100] and [111] crystal planes to induce the formation of uniform cubooctahedral Fe3O4 NPs. The continuous release and oxidation of Fe2+ from pre-formed Fe2+-rich precursors within the Mms6-28-based template make the reaction much controllable. The study affords new insights into the bioinspired- and bio-synthesis mechanism of magnetosomes.

Biomedical applications of magnetosomes: State of the art and perspectives

Magnetosomes, synthesized by magnetotactic bacteria (MTB), have been used in nano- and biotechnological applications, owing to their unique properties such as superparamagnetism, uniform size distribution, excellent bioavailability, and easily modifiable functional groups. In this review, we first discuss the mechanisms of magnetosome formation and describe various modification methods. Subsequently, we focus on presenting the biomedical advancements of bacterial magnetosomes in biomedical imaging, drug delivery, anticancer therapy, biosensor. Finally, we discuss future applications and challenges. This review summarizes the application of magnetosomes in the biomedical field, highlighting the latest advancements and exploring the future development of magnetosomes.

Chain Sliding versus β-Sheet Formation upon Shearing Single α-Helical Coiled Coils

Coiled coils (CCs) are key building blocks of biogenic materials and determine their mechanical response to large deformations. Of particular interest is the observation that CC-based materials display a force-induced transition from α-helices to mechanically stronger β-sheets (αβT). Steered molecular dynamics simulations predict that this αβT requires a minimum, pulling speed-dependent CC length. Here, de novo designed CCs with a length between four to seven heptads are utilized to probe if the transition found in natural CCs can be mimicked with synthetic sequences. Using single-molecule force spectroscopy and molecular dynamics simulations, these CCs are mechanically loaded in shear geometry and their rupture forces and structural responses to the applied load are determined. Simulations at the highest pulling speed (0.01 nm ns^-1 ) show the appearance of β-sheet structures for the five- and six-heptad CCs and a concomitant increase in mechanical strength. The αβT is less probable at a lower pulling speed of 0.001 nm ns^-1 and is not observed in force spectroscopy experiments. For CCs loaded in shear geometry, the formation of β-sheets competes with interchain sliding. β-sheet formation is only possible in higher-order CC assemblies or in tensile-loading geometries where chain sliding and dissociation are prohibited.

A versatile non-fouling multi-step flow reactor platform: demonstration for partial oxidation synthesis of iron oxide nanoparticles

In the last decade flow reactors for material synthesis were firmly established, demonstrating advantageous operating conditions, reproducible and scalable production via continuous operation, as well as high-throughput screening of synthetic conditions. Reactor fouling, however, often restricts flow chemistry and the common fouling prevention via segmented flow comes at the cost of inflexibility. Often, the difficulty of feeding reagents into liquid segments (droplets or slugs) constrains flow syntheses using segmented flow to simple synthetic protocols with a single reagent addition step prior or during segmentation. Hence, the translation of fouling prone syntheses requiring multiple reagent addition steps into flow remains challenging. This work presents a modular flow reactor platform overcoming this bottleneck by fully exploiting the potential of three-phase (gas-liquid-liquid) segmented flow to supply reagents after segmentation, hence facilitating fouling free multi-step flow syntheses. The reactor design and materials selection address the operation challenges inherent to gas-liquid-liquid flow and reagent addition into segments allowing for a wide range of flow rates, flow ratios, temperatures, and use of continuous phases (no perfluorinated solvents needed). This "Lego®-like" reactor platform comprises elements for three-phase segmentation and sequential reagent addition into fluid segments, as well as temperature-controlled residence time modules that offer the flexibility required to translate even complex nanomaterial synthesis protocols to flow. To demonstrate the platform's versatility, we chose a fouling prone multi-step synthesis, i.e., a water-based partial oxidation synthesis of iron oxide nanoparticles. This synthesis required I) the precipitation of ferrous hydroxides, II) the addition of an oxidation agent, III) a temperature treatment to initiate magnetite/maghemite formation, and IV) the addition of citric acid to increase the colloidal stability. The platform facilitated the synthesis of colloidally stable magnetic nanoparticles reproducibly at well-controlled synthetic conditions and prevented fouling using heptane as continuous phase. The biocompatible particles showed excellent heating abilities in alternating magnetic fields (ILP values >3 nH m² kg_Fe^-1), hence, their potential for magnetic hyperthermia cancer treatment. The platform allowed for long term operation, as well as screening of synthetic conditions to tune particle properties. This was demonstrated via the addition of tetraethylenepentamine, confirming its potential to control particle morphology. Such a versatile reactor platform makes it possible to translate even complex syntheses into flow, opening up new opportunities for material synthesis.

Magnetosome-inspired synthesis of soft ferrimagnetic nanoparticles for magnetic tumor targeting

Magnetic targeting is one of the most promising approaches for improving the targeting efficiency by which magnetic drug carriers are directed using external magnetic fields to reach their targets. As a natural magnetic nanoparticle (MNP) of biological origin, the magnetosome is a special "organelle" formed by biomineralization in magnetotactic bacteria (MTB) and is essential for MTB magnetic navigation to respond to geomagnetic fields. The magnetic targeting of magnetosomes, however, can be hindered by the aggregation and precipitation of magnetosomes in water and biological fluid environments due to the strong magnetic attraction between particles. In this study, we constructed a magnetosome-like nanoreactor by introducing MTB Mms6 protein into a reverse micelle system. MNPs synthesized by thermal decomposition exhibit the same crystal morphology and magnetism (high saturation magnetization and low coercivity) as natural magnetosomes but have a smaller particle size. The DSPE-mPEG-coated magnetosome-like MNPs exhibit good monodispersion, penetrating the lesion area of a tumor mouse model to achieve magnetic enrichment by an order of magnitude more than in the control groups, demonstrating great prospects for biomedical magnetic targeting applications.

Peptide-based assembled nanostructures that can direct cellular responses

Natural originated materials have been well-studied over the past several decades owing to their higher biocompatibility compared to the traditional polymers. Peptides, consisting of amino acids, are among the most popular programable building blocks, which is becoming a growing interest in nanobiotechnology. Structures assembled using those biomimetic peptides allow the exploration of chemical sequences beyond those been routinely used in biology. In this Review, we discussed the most recent experimental discoveries on the peptide-based assembled nanostructures and their potential application at the cellular level such as drug delivery. In particular, we explored the fundamental principles of peptide self-assembly and the most recent development in improving their interactions with biological systems. We believe that as the fundamental knowledge of the peptide assemblies evolves, the more sophisticated and versatile nanostructures can be built, with promising biomedical applications.

A novel solar-powered electrochemical mineralization system for persistent remediation of uranium-contaminated groundwater

Reduction of the migratory ability of uranium via reduction, co-precipitation or immobilization is a widely used technology for remediation of uranium contaminated groundwater (UCG). However, the re-released uranium due to environmental alterations such as oxidation, acid dissolution, or microbial decomposition limits the long-term effect of UCG remediation. Here, we developed a novel solar-powered electrochemical mineralization (SPEM) system for persistent remediation of UCG under laboratory conditions. The SPEM system incorporates uranium into magnetite crystal to achieve long-term stability of uranium. The effects of photoelectric conversion, subsurface void fraction, groundwater seepage velocity, and electrode configuration on uranium removal were systematically analyzed. The results showed that the remediation system had excellent adaptability to complex water quality and geological conditions, and could remediate large-area contamination. After 12 h of persistent treatment, the system with newly hexagonal two-dimensional electrode configuration (1A6C) reduced uranium concentration by more than 85% in simulated subsurface environment. The mineralized uranium was not re-released within continuous rinsing of treated regions using an acid solution (pH = 3.0), for 370 h. The developed method solely requires metallic iron as a raw material, which has high and long-term efficiency, is eco-friendly, simple, and widely applicable, thus reliable for the remediation of deep UCG.

Magnetite-binding proteins from the magnetotactic bacterium Desulfamplus magnetovallimortis BW-1

Magnetite-binding proteins are in high demand for the functionalization of magnetic nanoparticles. Binding analysis of six previously uncharacterized proteins from the magnetotactic Deltaproteobacterium Desulfamplus magnetovallimortis BW-1 identified two new magnetite-binding proteins (Mad10, Mad11). These proteins can be utilized as affinity tags for the immobilization of recombinant fusion proteins to magnetite.

One-Pot Synthesis of Multiple Stimuli-Responsive Magnetic Nanomaterials Based on the Biomineralization of Elastin-like Polypeptides

Synthesis of multiple stimuli-responsive magnetic nanomaterials in a green way remains as a big challenge currently. Herein, temperature-responsive elastin-like polypeptides (ELPs) were designed to involve in the biomimetic mineralization and successfully prepared magnetic nanoparticles (MNPs) (named ELPs-MNPs) with multiple responsiveness (temperature, magnetic, and biomimetic silicification responsiveness) in one pot. ELPs-MNPs were identified as cubic nanomaterials with an average size of about 32 nm and in line with the classic ferromagnetic behavior. Interestingly, ELPs-MNPs show clearly lower critical solution temperature phase behavior with a transition temperature of 36 °C. Moreover, ELPs-MNPs can spontaneously trigger the biosilicification of tetramethyl orthosilicate (TMOS) to entrap themselves into silicon oxide as proved by the Fourier transform infrared spectra (FTIR) and elemental mapping of transmission electron microscopy (TEM), with an average size of about 62 nm. The possible role of ELPs in the biomimetic preparation of the multiple stimuli-responsive MNPs was also addressed. The proposed novel and simple one-pot strategy to synthesize multifunctional nanomaterials with higher effectiveness is the first report for preparing MNPs with multiple stimuli response. This strategy conforms to the concept of green chemistry and will pave a new way for the design of smart biomaterials, which may have great potentials for different fields.

Localization of Native Mms13 to the Magnetosome Chain of Magnetospirillum magneticum AMB-1 Using Immunogold Electron Microscopy, Immunofluorescence Microscopy and Biochemical Analysis

Magnetotactic bacteria (MTB) biomineralize intracellular magnetite (Fe3O4) crystals surrounded by a magnetosome membrane (MM). The MM contains membrane-specific proteins that control Fe3O4 mineralization in MTB. Previous studies have demonstrated that Mms13 is a critical protein within the MM. Mms13 can be isolated from the MM fraction of Magnetospirillum magneticum AMB-1 and a Mms13 homolog, MamC, has been shown to control the size and shape of magnetite nanocrystals synthesized in-vitro. The objective of this study was to use several independent methods to definitively determine the localization of native Mms13 in M. magneticum AMB-1. Using Mms13-immunogold labeling and transmission electron microscopy (TEM), we found that Mms13 is localized to the magnetosome chain of M. magneticum AMB-1 cells. Mms13 was detected in direct contact with magnetite crystals or within the MM. Immunofluorescence detection of Mms13 in M. magneticum AMB-1 cells by confocal laser scanning microscopy (CLSM) showed Mms13 localization along the length of the magnetosome chain. Proteins contained within the MM were resolved by SDS-PAGE for Western blot analysis and LC-MS/MS (liquid chromatography with tandem mass spectrometry) protein sequencing. Using Anti-Mms13 antibody, a protein band with a molecular mass of ~14 kDa was detected in the MM fraction only. This polypeptide was digested with trypsin, sequenced by LC-MS/MS and identified as magnetosome protein Mms13. Peptides corresponding to the protein’s putative MM domain and catalytic domain were both identified by LC-MS/MS. Our results (Immunogold TEM, Immunofluorescence CLSM, Western blot, LC-MS/MS), combined with results from previous studies, demonstrate that Mms13 and homolog proteins MamC and Mam12, are localized to the magnetosome chain in MTB belonging to the class Alphaproteobacteria. Because of their shared localization in the MM and highly conserved amino acid sequences, it is likely that MamC, Mam12, and Mms13 share similar roles in the biomineralization of Fe3O4 nanocrystals.

Wettability of Magnetite Nanoparticles Guides Growth from Stabilized Amorphous Ferrihydrite

Crystal formation via amorphous precursors is a long-sought-after gateway to engineer nanoparticles with well-controlled size and morphology. Biomineralizing organisms, like magnetotactic bacteria, follow such a nonclassical crystallization pathway to produce magnetite nanoparticles with sophistication unmatched by synthetic efforts at ambient conditions. Here, using in situ small-angle X-ray scattering, we demonstrate how the addition of poly(arginine) in the synthetic formation of magnetite nanoparticles induces a biomineralization-reminiscent pathway. The addition of poly(arginine) stabilizes an amorphous ferrihydrite precursor, shifting the magnetite formation pathway from thermodynamic to kinetic control. Altering the energetic landscape of magnetite formation by catalyzing the pH-dependent precursor attachment, we tune magnetite nanoparticle size continuously, exceeding sizes observed in magnetotactic bacteria. This mechanistic shift we uncover here further allows for crystal morphology control by adjusting the pH-dependent interfacial interaction between liquidlike ferrihydrite and nascent magnetite nanoparticles, establishing a new strategy to control nanoparticle morphology. Synthesizing compact single crystals at wetting conditions and unique semicontinuous single-crystalline nanoparticles at dewetting conditions in combination with an improved control over magnetite crystallite size, we demonstrate the versatility of bio-inspired, kinetically controlled nanoparticle formation pathways.

Synthesis and applications of anisotropic nanoparticles with precisely defined dimensions

Shape and size play powerful roles in determining the properties of a material; controlling these aspects with precision is therefore an important, fundamental goal of the chemical sciences. In particular, the introduction of shape anisotropy at the nanoscale has emerged as a potent way to access new properties and functionality, enabling the exploration of complex nanomaterials across a range of applications. Recent advances in DNA and protein nanotechnology, inorganic crystallization techniques, and precision polymer self-assembly are now enabling unprecedented control over the synthesis of anisotropic nanoparticles with a variety of shapes, encompassing one-dimensional rods, dumbbells and wires, two-dimensional and three-dimensional platelets, rings, polyhedra, stars, and more. This has, in turn, enabled much progress to be made in our understanding of how anisotropy and particle dimensions can be tuned to produce materials with unique and optimized properties. In this Review, we bring these recent developments together to critically appraise the different methods for the bottom-up synthesis of anisotropic nanoparticles enabling exquisite control over morphology and dimensions. We highlight the unique properties of these materials in arenas as diverse as electron transport and biological processing, illustrating how they can be leveraged to produce devices and materials with otherwise inaccessible functionality. By making size and shape our focus, we aim to identify potential synergies between different disciplines and produce a road map for future research in this crucial area.

Intrinsically Magnetic Cells: A Review on Their Natural Occurrence and Synthetic Generation

The magnetization of non-magnetic cells has great potential to aid various processes in medicine, but also in bioprocess engineering. Current approaches to magnetize cells with magnetic nanoparticles (MNPs) require cellular uptake or adsorption through in vitro manipulation of cells. A relatively new field of research is "magnetogenetics" which focuses on in vivo production and accumulation of magnetic material. Natural intrinsically magnetic cells (IMCs) produce intracellular, MNPs, and are called magnetotactic bacteria (MTB). In recent years, researchers have unraveled function and structure of numerous proteins from MTB. Furthermore, protein engineering studies on such MTB proteins and other potentially magnetic proteins, like ferritins, highlight that in vivo magnetization of non-magnetic hosts is a thriving field of research. This review summarizes current knowledge on recombinant IMC generation and highlights future steps that can be taken to succeed in transforming non-magnetic cells to IMCs.

Bio-synthesized iron oxide nanoparticles for cancer treatment

Various living organisms, such as bacteria, plants, and animals can synthesize iron oxide nanoparticles (IONP). The mechanism of nanoparticle (NP) formation is usually described as relying on the reduction of ferric/ferrous iron ions into crystallized nanoparticulate iron that is surrounded by an organic stabilizing layer. The properties of these NP are characterized by a composition made of different types of iron oxide whose most stable and purest one appears to be maghemite, by a size predominantly comprised between 5 and 380 nm, by a crystalline core, by a surface charge which depends on the nature of the material coating the iron oxide, and by certain other properties such as a sterility, stability, production in mass, absence of aggregation, that have apparently only been studied in details for IONP synthesized by magnetotactic bacteria, called magnetosomes. In the majority of studies, bio-synthesized IONP are described as being biocompatible and as not inducing cytotoxicity towards healthy cells. Anti-tumor activity of bio-synthesized IONP has mainly been demonstrated in vitro, where this type of NP displayed cytotoxicity towards certain tumor cells, e.g. through the anti-tumor activity of IONP coating or through IONP anti-oxidizing property. Concerning in vivo anti-tumor activity, it was essentially highlighted for magnetosomes administered in different types of glioblastoma tumors (U87-Luc and GL-261), which were exposed to a series of alternating magnetic field applications, resulting in mild hyperthermia treatments at typical temperatures of 41-45 °C, leading to the full disappearance of these tumors without any observable side effects.

Shaping Magnetite with Poly-l-arginine and pH: From Small Single Crystals to Large Mesocrystals

Control over particle size, size distribution, and colloidal stability are central aims in producing functional nanomaterials. Recently, biomimetic approaches have been successfully used to enhance control over properties in the synthesis of those materials. Magnetotactic bacteria produce protein-stabilized magnetite away from its thermodynamic equilibrium structure. Mimicking the bacteria's proteins using poly-l-arginine we show that by simply increasing the pH, the dimensions of magnetite increase and a single- to mesocrystal transformation is induced. Using synchrotron X-ray diffraction and transmission electron microscopy, we show that magnetite nanoparticles with narrow size distributions and average diameters of 10 ± 2 nm for pH 9, 20 ± 2 nm for pH 10, and up to 40 ± 4 nm for pH 11 can be synthesized. We thus selectively produce superparamagnetic and stable single-domain particles merely by controlling the pH. Remarkably, while an increase in pH brings about a thermodynamically driven decrease in size for magnetite without additives, this dependency on pH is inverted when poly-l-arginine is present.