Photo-activated raster scanning thermal imaging at sub-diffraction resolution

Additive Manufacturing of Thermoelectric Microdevices for 4D Thermometry

Thermometry, the process of measuring temperature, is one of the most fundamental tasks not only for understanding the thermodynamics of basic physical, chemical, and biological processes but also for thermal management of microelectronics. However, it is a challenge to acquire microscale temperature fields in both space and time. Here, a 3D printed micro-thermoelectric device that enables direct 4D (3D Space + Time) thermometry at the microscale is reported. The device is composed of freestanding thermocouple probe networks, fabricated by bi-metal 3D printing with an outstanding spatial resolution of a few µm. It shows that the developed 4D thermometry can explore dynamics of Joule heating or evaporative cooling on microscale subjects of interest such as a microelectrode or a water meniscus. The utilization of 3D printing further opens up the possibility to freely realize a wide range of on-chip, freestanding microsensors or microelectronic devices without the design restrictions by manufacturing processes.

Nondestructive thermographic detection of internal defects using pixel-pattern based laser excitation and photothermal super resolution reconstruction

In this work, we present a novel approach to photothermal super resolution based thermographic resolution of internal defects using two-dimensional pixel pattern-based active photothermal laser heating in conjunction with subsequent numerical reconstruction to achieve a high-resolution reconstruction of internal defect structures. With the proposed adoption of pixelated patterns generated using laser coupled high-power DLP projector technology the complexity for achieving true two-dimensional super resolution can be dramatically reduced taking a crucial step forward towards widespread practical viability. Furthermore, based on the latest developments in high-power DLP projectors, we present their first application for structured pulsed thermographic inspection of macroscopic metal samples. In addition, a forward solution to the underlying inverse problem is proposed along with an appropriate heuristic to find the regularization parameters necessary for the numerical inversion in a laboratory setting. This allows the generation of synthetic measurement data, opening the door for the application of machine learning based methods for future improvements towards full automation of the method. Finally, the proposed method is experimentally validated and shown to outperform several established conventional thermographic testing techniques while conservatively improving the required measurement times by a factor of 8 compared to currently available photothermal super resolution techniques.

Enzyme-modulated photothermal immunoassay of chloramphenicol residues in milk and egg using a self-calibrated thermal imager

Highly sensitive and accurate detection of chloramphenicol is of paramount importance for food safety. Herein, an enzyme-modulated photothermal immunosensor that uses a self-calibrated thermal imaging system (SCTIS) as signal read-out was developed for detecting chloramphenicol. In this immunosensor, alkaline phosphatase was used as a modulator of the photothermal conversion. It could hydrolyze the substrate into ascorbic acid, thereby reducing oxidized 3,3',5,5'-tetramethylbenzidine, which exhibited a near-infrared laser-driven photothermal effect. For precise temperature measurement, the SCTIS was designed by using the temperature compensation of a ceramic chip to enable real-time self-calibration of the temperature. This SCTIS-based immunosensor could detect chloramphenicol with a LOD of 9 pg/mL in 2 h, and relative standard derivations from 3.95% to 13.58%. The average recoveries in milk and egg samples ranged from 76% to 114%. This versatile sensing strategy can detect various targets by altering recognition elements, thus has wide applicability in food safety testing and monitoring.

Quantitative active super-resolution thermal imaging: The melanoma case study

Super-resolution image acquisition has turned photo-activated far-infrared thermal imaging into a promising tool for the characterization of biological tissues. By the sub-diffraction localization of sparse temperature increments primed by the sample absorption of modulated focused laser light, the distribution of (endogenous or exogenous) photo-thermal biomarkers can be reconstructed at tunable ∼10−50 μm resolution. We focus here on the theoretical modeling of laser-primed temperature variations and provide the guidelines to convert super-resolved temperature-based images into quantitative maps of the absolute molar concentration of photo-thermal probes. We start from camera-based temperature detection via Stefan–Boltzmann’s law, and elucidate the interplay of the camera point-spread-function and pixelated sensor size with the excitation beam waist in defining the amplitude of the measured temperature variations. This can be accomplished by the numerical solution of the three-dimensional heat equation in the presence of modulated laser illumination on the sample, which is characterized in terms of thermal diffusivity, conductivity, thickness, and concentration of photo-thermal species. We apply our data-analysis protocol to murine B16 melanoma biopsies, where melanin is mapped and quantified in label-free configuration at sub-diffraction 40 µm resolution. Our results, validated by an unsupervised machine-learning analysis of hematoxylin-and-eosin images of the same sections, suggest potential impact of super-resolved thermography in complementing standard histopathological analyses of melanocytic lesions.

Design and Construction of an LED-Based Excitation Source for Lock-In Thermography

Active thermography is an established technique for non-destructive testing and defect localisation. For external excitation, powerful light sources are commonly used. In addition to a high optical output, a good signal shape and response characteristic as well as control ports, which allow for multiple operation modes, are important for active thermography applications. In this work, the schematics for an excitation source based on infrared LEDs is presented. It features multiple control modes for easy integration into existing measurement setups as well as sophisticated control electronics to realize a wide range of excitation patterns. The phase and amplitude stability of this prototype is investigated and compared to the performance of a modulated halogen lamp as well as a halogen lamp and mechanical chopper combination.

Spatially Resolved Temperature Distribution in a Rare-Earth-Doped Transparent Glass-Ceramic

Knowing the temperature distribution within the conducting walls of various multilayer-type materials is crucial for a better understanding of heat-transfer processes. This applies to many engineering fields, good examples being photovoltaics and microelectronics. In this work we present a novel fluorescence technique that makes possible the non-invasive imaging of local temperature distributions within a transparent, temperature-sensitive, co-doped Er:GPF1Yb0.5Er glass-ceramic with micrometer spatial resolution. The thermal imaging was performed with a high-resolution fluorescence microscopy system, measuring different focal planes along the z-axis. This ultimately enabled a precise axial reconstruction of the temperature distribution across a 500-µm-thick glass-ceramic sample. The experimental measurements showed good agreement with computer-modeled heat simulations and suggest that the technique could be adopted for the spatial analyses of local thermal processes within optically transparent materials. For instance, the technique could be used to measure the temperature distribution of intermediate, transparent layers of novel ultra-high-efficiency solar cells at the micron and sub-micron levels.

Melanin concentration maps by label-free super-resolution photo-thermal imaging on melanoma biopsies

Surgical excision followed by histopathological examination is the gold standard for melanoma screening. However, the color-based inspection of hematoxylin-and-eosin-stained biopsies does not provide a space-resolved quantification of the melanin content in melanocytic lesions. We propose a non-destructive photo-thermal imaging method capable of characterizing the microscopic distribution and absolute concentration of melanin pigments in excised melanoma biopsies. By exploiting the photo-thermal effect primed by melanin absorption of visible laser light we obtain label-free super-resolution far-infrared thermal images of tissue sections where melanin is spatially mapped at sub-diffraction 40-μm resolution. Based on the finite-element simulation of the full 3D heat transfer model, we are able to convert temperature maps into quantitative images of the melanin molar concentration on B16 murine melanoma biopsies, with 4·10^-4 M concentration sensitivity. Being readily applicable to human melanoma biopsies in combination with hematoxylin-and-eosin staining, the proposed approach could complement traditional histopathology in the characterization of pigmented lesions ex-vivo.

Nanosecond-resolution photothermal dynamic imaging via MHZ digitization and match filtering

Photothermal microscopy has enabled highly sensitive label-free imaging of absorbers, from metallic nanoparticles to chemical bonds. Photothermal signals are conventionally detected via modulation of excitation beam and demodulation of probe beam using lock-in amplifier. While convenient, the wealth of thermal dynamics is not revealed. Here, we present a lock-in free, mid-infrared photothermal dynamic imaging (PDI) system by MHz digitization and match filtering at harmonics of modulation frequency. Thermal-dynamic information is acquired at nanosecond resolution within single pulse excitation. Our method not only increases the imaging speed by two orders of magnitude but also obtains four-fold enhancement of signal-to-noise ratio over lock-in counterpart, enabling high-throughput metabolism analysis at single-cell level. Moreover, by harnessing the thermal decay difference between water and biomolecules, water background is effectively separated in mid-infrared PDI of living cells. This ability to nondestructively probe chemically specific photothermal dynamics offers a valuable tool to characterize biological and material specimens.

Photothermal microscopy is limited for imaging of thermal dynamics. Here, the authors introduce a lock-in free, mid-infrared photothermal dynamic imaging system, which significantly increases SNR and imaging speed, and demonstrate metabolism analysis at single-cell level and background removal.

Multiphoton Laser Fabrication of Hybrid Photo-Activable Biomaterials

The possibility to shape stimulus-responsive optical polymers, especially hydrogels, by means of laser 3D printing and ablation is fostering a new concept of “smart” micro-devices that can be used for imaging, thermal stimulation, energy transducing and sensing. The composition of these polymeric blends is an essential parameter to tune their properties as actuators and/or sensing platforms and to determine the elasto-mechanical characteristics of the printed hydrogel. In light of the increasing demand for micro-devices for nanomedicine and personalized medicine, interest is growing in the combination of composite and hybrid photo-responsive materials and digital micro-/nano-manufacturing. Existing works have exploited multiphoton laser photo-polymerization to obtain fine 3D microstructures in hydrogels in an additive manufacturing approach or exploited laser ablation of preformed hydrogels to carve 3D cavities. Less often, the two approaches have been combined and active nanomaterials have been embedded in the microstructures. The aim of this review is to give a short overview of the most recent and prominent results in the field of multiphoton laser direct writing of biocompatible hydrogels that embed active nanomaterials not interfering with the writing process and endowing the biocompatible microstructures with physically or chemically activable features such as photothermal activity, chemical swelling and chemical sensing.

Laser excited super resolution thermal imaging for nondestructive inspection of internal defects

A photothermal super resolution technique is proposed for an improved inspection of internal defects. To evaluate the potential of the laser-based thermographic technique, an additively manufactured stainless steel specimen with closely spaced internal cavities is used. Four different experimental configurations in transmission, reflection, stepwise and continuous scanning are investigated. The applied image post-processing method is based on compressed sensing and makes use of the block sparsity from multiple measurement events. This concerted approach of experimental measurement strategy and numerical optimization enables the resolution of internal defects and outperforms conventional thermographic inspection techniques.

Focal dynamic thermal imaging for label-free high-resolution characterization of materials and tissue heterogeneity

Evolution from static to dynamic label-free thermal imaging has improved bulk tissue characterization, but fails to capture subtle thermal properties in heterogeneous systems. Here, we report a label-free, high speed, and high-resolution platform technology, focal dynamic thermal imaging (FDTI), for delineating material patterns and tissue heterogeneity. Stimulation of focal regions of thermally responsive systems with a narrow beam, low power, and low cost 405 nm laser perturbs the thermal equilibrium. Capturing the dynamic response of 3D printed phantoms, ex vivo biological tissue, and in vivo mouse and rat models of cancer with a thermal camera reveals material heterogeneity and delineates diseased from healthy tissue. The intuitive and non-contact FDTI method allows for rapid interrogation of suspicious lesions and longitudinal changes in tissue heterogeneity with high-resolution and large field of view. Portable FDTI holds promise as a clinical tool for capturing subtle differences in heterogeneity between malignant, benign, and inflamed tissue.

Copper-Enriched Prussian Blue Nanomedicine for In Situ Disulfiram Toxification and Photothermal Antitumor Amplification

In situ toxification of less toxic substance for the generation of effective anticarcinogens at the specific tumor tissue has been a novel paradigm for combating cancer. Significant efforts have been recently dedicated to turning clinical-approved drugs into anticancer agents in specific tumor microenvironment by chemical reactions. Herein, a hollow mesoporous Prussian blue (HMPB)-based therapeutic nanoplatform, denoted as DSF@PVP/Cu-HMPB, is constructed by encapsulating alcohol-abuse drug disulfiram (DSF) into the copper-enriched and polyvinylpyrrolidone (PVP)-decorated HMPB nanoparticles to achieve in situ chemical reaction-activated and hyperthermia-amplified chemotherapy of DSF. Upon tumor accumulation of DSF@PVP/Cu-HMPB, the endogenous mild acidity in tumor condition triggers the biodegradation of the HMPB nanoparticle and the concurrent co-releases of DSF and Cu²⁺ , thus forming cytotoxic bis(N,N-diethyl dithiocarbamato)copper(II) complexes (CuL₂ ) via DSF-Cu²⁺ chelating reaction. Moreover, by the intrinsic photothermal-conversion effect of PVP/Cu-HMPBs, the anticancer effect of DSF is augmented by the hyperthermia generated upon near-infrared irradiation, thus inducing remarkable cell apoptosis in vitro and tumor elimination in vivo on both subcutaneous and orthotopic tumor-bearing models. This strategy of in situ drug transition by chemical chelation reaction and photothermal-augmentation provides a promising paradigm for designing novel cancer-therapeutic nanoplatforms.